Electrification and Air Conditioning Works for Newly Constructed Auditorium at Sree Sankaracharya University of Sanskrit Kalady

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Group B

Group C

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 6sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required

Supplying and fixing 9W LED Bulb including connection etc. as required

Supply, Installation testing and commissioning of prewired 20 Watt LED Tube With Box type Tubeset Body all types, complete with all accessories and LED tubes etc directly on ceiling/ wall using PVC round Block or Direct screw to wall, including connection with 1.5sqmm FRLS PVC insulated copper conductor, single core cable and earthing etc as required.

Supply installation testing and commissioning of 15 W LED Round/ Square type celing mounting fitting ( Crompton or Equavalent Havells,Philips or Bajaj) fixed on cealing giving connection with required length of 24/.20mm PVC insulated and PVC sheathed 650 /1100V grade round 3 core copper conductor conforming to relavant ISS with all necessary items making good the surface as required.(MR)

Supply installation testing and commissioning of 36 W LED Square (60x60 Cm) type celing mounting fitting ( Crompton or Equavalent Havells,Philips or Bajaj) fixed on cealing giving connection with required length of 24/.20mm PVC insulated and PVC sheathed 650 /1100V grade round 3 core copper conductor conforming to relavant ISS with all necessary items making good the surface as required.with Supply and fixing Frame for the same if required(MR)

Supply installation testing and commissioning of 200 W LED Flood Light with IP 65 protection (Crompton, Havells,Philips or Bajaj ) fixed on metal frame using flat iron clamps fabricated frpm 25x3 mm MS flat giving connection with required length of 1.5sqmm PVC insulated and PVC sheathed 650 /1100V grade round 3 core copper conductor conforming to relavant ISS with all necessary items making good the surface as required.(MR)

Supply installation testing and commissioning of 25 W LED Street Light with IP 65 protection ( Crompton or Equavalent Havells,Philips or Bajaj) on 32 mm or nearest suitable size B class GI pipe1.0M long cut and weld,bend to shape fixed on wall using flat iron clamps fabricated frpm 25x3 mm MS flat giving connection with required length of 24/.20mm PVC insulated and PVC sheathed 650 /1100V grade round 3 core copper conductor conforming to relavant ISS painting the GI pipe and clamps with all necessary items making good the surface as required.(MR)

Supply & installation of 1200 mm sweep 5 Star- ceiling fans, capacitor type complete with 300 mm down rod, canopies, shackle, rubber bush, blades and electronic stepped type speed regulator suitable for operation of 230V, 50 HZ single phase AC supply conforming to IS - 374 completely prewired upto terminal block. Installation of ceiling fans of all sizes having standard down rod with all materials required for installation complete with necessary interconnections, earthing. (Usha,Kaithan,Havells or CG Equavalent make).

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe , heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Supply and installation of exhaust fan 300mm sweep in the opening, including making opening and clear the surface, good the damage, connection, testing, commissioning etc. as required.

Supply and installation of Heavy Duty exhaust fan 300mm sweep in the opening, including making opening and clear the surface, good the damage, connection, testing, commissioning etc. as required.

Supply of Installation of Single phase Heavy duty Wall Fan of 600mm or above sweep with metal leaf and metal body 1440 Rpm or above including connection, testing, commissioning etc. as required.

Supply and fixing following way,horizondal type three pole and neutral,sheet steel,MCB distribution board,415 volts on surface/recess,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,power painted including earthing etc.as required(but without MCB/RCCB/isolator 6 way, MCCB Vertical TPN Double door

8 way, MCB Vertical TPN Double door

6 way(4+18), Double door TPN

12 way, Double door SPN DB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 A, 16 kA,TPMCCB

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 10 - 32A, SP MCB

10 - 32A, TP MCB

40 - 63A, TP MCB

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A, 4P ISO

63A, 4P ISO

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A, 4 pole, 30-100 mA RCCB

63 A, 4 pole, 30-100 mA RCCB

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A, 415 V “C” curve TP MCB complete with connections, testing and commissioning etc. as required.

EARTHING Supply and providing plate earthing as per IS 3043 with 600x600x6.30 mm GI/CI earth plate, 20 mm GI watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in hard soil)

Supplying and laying 25 mm X 3 mm copper strip as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.

Providing and fixing 4.00 mm dia copper wire on surface or inrecess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Providing and fixing 10 SWG dia copper wire on surface or inrecess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Supply, of one number PVC insulated and PVC sheathed, XLPE power cable of 1.1KV grade as required. 4 X 16 sq mm

3.5 X 35 sq mm

3.5 X 95 sq mm

3.5X185 sq mm

3.5X240 sq mm

3.5X300 sq mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required Upto 35 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 x 16 sq mm

3.5 X 35 sq mm

3.5 X 95 sq mm

3.5X185 sq mm

3.5X240 sq mm

3.5X300 sq mm

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench . 110/ 94 mm or adequate size for 185 sqmm cable

Fabrication,Supply and Erection of Sub- Panel board Fabrication, supply, conveyance, installation, testing and commissioning of floor mounting dust and vermin proof cubicle pattern metallic MV panel Board of with one nos 400 A 4P MCCB Micro processer Based with ROM & Spreader as KSEB Incomer and 400A On Load Change Over 1 Nos ,Outgoings 2 Nos 125 A TPN MCCB with ROM & Spreader, ,8 Nos 100 A TPN MCCB with ROM & Spreader, 2 Nos 63 A TPN MCCB with ROM & Spreader and LED Indiaction-2 sets , MFM Metere-2 sets For KSEB and DG set . It including ELR with CBCT and Shunt Trip , The board shall be fabricated incorporating all incoming and outgoing switches using 1.6mm MS sheet with necessary cable entry wire way boxes for all switches and with suitable size. Interconnections are to made with rigid copper conductor or strip , bus bar using aluminium strips of adequate size tinned at the point of contacts sleeved with heat shrinkable sleeves a. All the doors shall be earthed using braided copper of approximate size. The board shall be painted with two coats of synthetic enamel paint over a coat of zinc chromate primer. The board shall confirm to relevant ISS & IE rules and shall be installed as directed at site.

Fabrication,Supply and Erection of Sub- Panel board Fabrication, supply, conveyance, installation, testing and commissioning of floor mounting dust and vermin proof cubicle pattern metallic MV panel Board of with one nos 250A 4P MCCB Micro processer Based with ROM & Spreader as KSEB Incomer and 250A On Load Change Over 1 Nos ,Outgoings 2 Nos 125 A TPN MCCB with ROM & Spreader, 2 Nos 100 A TPN MCCB with ROM & Spreader, 2 Nos 63 A TPN MCCB with ROM & Spreader and LED Indiaction-2 sets , MFM Metere-2 sets For KSEB and DG set . It incliding ELR with CBCT and Shunt Trip , The board shall be fabricated incorporating all incoming and outgoing switches using 1.6mm MS sheet with necessary cable entry wire way boxes for all switches and with suitable size. Interconnections are to made with rigid copper conductor or strip , bus bar using aluminium strips of adequate size tinned at the point of contacts sleeved with heat shrinkable sleeves a. All the doors shall be earthed using braided copper of approximate size. The board shall be painted with two coats of synthetic enamel paint over a coat of zinc chromate primer. The board shall confirm to relevant ISS & IE rules and shall be installed as directed at site.

Fabrication,Supply and Erection of Sub- Panel board Fabrication, supply, conveyance, installation, testing and commissioning of floor mounting dust and vermin proof cubicle pattern metallic MV panel Board of with 1 nos 630 A 4P MCCB Micro processer Based with ROM & Spreader as Incomer and Outgoings 1 Nos 400 A TPN MCCB with ROM & Spreader, ,1Nos 250 A TPN MCCB with ROM & Spreader, 1 Nos Dummy Chamber and LED Indiaction-1 sets , MFM Metere-1 sets The board shall be fabricated incorporating all incoming and outgoing switches using 1.6mm MS sheet with necessary cable entry wire way boxes for all switches and with suitable size. Interconnections are to made with rigid copper conductor or strip , bus bar using aluminium strips of adequate size tinned at the point of contacts sleeved with heat shrinkable sleeves a. All the doors shall be earthed using braided copper of approximate size. The board shall be painted with two coats of synthetic enamel paint over a coat of zinc chromate primer. The board shall confirm to relevant ISS & IE rules and shall be installed as directed at site.

Supply and providing 6 mm thick and 1 m wide electrical grade chequered type rubber mat to withstand 3.3 kV dielectric strength conforming to IS 5429/1969

Supply and providing CO2 type 4.5Kg fire extinguisher or equivalent.

Cable Trays and cable supports fabricated out of M.S.Angles (ISA) and M.S. flats with sufficient widthand Spacing between successive cross members and supported at adequate spacing. The cable trays and supports shall be painted with 2coats of Zinc chromate primer and 2coats of enamel paint. Thedesign of the cable trays and details shall be got approved by the Electrical Consultant/ client.

Preparation of schematic drawing and getting approval from Kerala State Electrical inspectorate, including liaison works etc complete as required ( License fees will be reimbursed by the customer on production of documentary evidence...)

SPEAKER WIRE: Supply and laying of 2X0.5 mm speaker wire through existing conduit etc as required.

Supply, Installation, Testing and Commissioning of 320 KVA, silent type, water cooled, radiator type, four stroke, electric start D.G Set including necessary RCC foundation with covered shed required for placing and operating the DG set as per the requirement of electrictrical inspectorate standards with acoustic enclosure and standard control panel with 500A, TPN, thermal magnetic MCCB, ammeter, voltmeter, indication lamp etc. The engine shall be capable of taking 10% overload for one hour after 12 hours of continuous operation. The alternator shall be brushless, self excited, self regulated, SPDP enclosure, class F/H insulation, suitable for continuous operation at 1500 rpm, generating 415 V +/- 5% at 0.8 p.f, 50Hz, 0.85 load factor, 3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722. The neutral of the DG set shall be provided with low set earth fault relay using 100/5A 5P10 10VA CT in the neutral earthing conductor . Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as antiviberation pad, lead acid batteries (as specified by engine manufacturer) and engine driven battery charger along with leads, battery stand, fuel piping from fuel tank to Engine, electronic governor, Residential silencer, suitable size cable termination box etc as required. Rate shall be inclusive of all lift, lead charges. The work should be as per Electrical Inspectorate / Pollution control board norms.Make of DG Kirlosker/Cumins//CAT piller.

Supply & installation of exhaust gas piping of suitable diameter for 320kVA DG set as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc as required.

AIR CONDITION WORKS HIGH SIDE-SUPPLY OF EQUIPMETS SUPPLY OF( LG/ BLUE STAR/VOLTAS) MAKE UNITS OF BELOW MENTIONED SPECIFICATIONS 1 TR INVERTER SPLIT

1.5 TR INVERTER 3 STAR SPLIT AC

2 TR INVERTER 3 STAR SPLIT AC

3 TR INVERTER CASETTE AC

4 TR INVERTER CASETTE AC

11 TR INVERTER SPLIT AC

LOW SIDE INSTALLATION, TESTING AND COMMISSIONING OF BELOW UNITS WITH 24 HRS PRESSURE TESTING 1 TR INVERTER SPLIT

1.5 TR INVERTER 3 STAR SPLIT AC

2 TR INVERTER 3 STAR SPLIT AC

3 TR INVERTER CASETTE AC

4 TR INVERTER CASETTE AC

11 TR INVERTER SPLIT AC

COPPER PIPING BETWEEN IDU'S AND ODU'S OF NECESSARY DIA COMPLETE WITH PROPER SUPPORTINGS AND NITROGEN FLUSHING OF THE CIRCUIT FOR CASETTE AC SUCTION LINE

DISCHARGE LINE

COPPER PIPING BETWEEN IDU'S AND ODU'S OF NECESSARY DIA COMPLETE WITH PROPER SUPPORTINGS AND NITROGEN FLUSHING OF THE CIRCUIT FOR 11 TR DUCTABLE SUCTION LINE

DISCHARGE LINE

COPPER PIPING BETWEEN IDU'S AND ODU'S OF NECESSARY DIA COMPLETE WITH PROPER SUPPORTINGS AND NITROGEN FLUSHING OF THE CIRCUIT FOR SPLIT UNITS SUCTION LINE

DISCHARGE LINE

COMMUNICATION CABLING USING 2.5SQMM 4 CORE COPPER CABLE

DRAIN PIPING OD ADEQUATE DIA WITH PROPER INSULATION 32MM DIA

ADDITIONAL REFRIGERANT GAS CHARGE R410 A

POWER CABLING FROM MCB TO IDU

POWER CABLING FROM MCB TO ODU

PEDESTIAL/ODU STAND FOR DUCTABLES

FOR HI-WALLS

FOR CASETTE

DUCTING WORKS FOR DUCTABLE UNITS OF SUITABLE GAUGE ACCORDING TO THE SIZE OF DUCTS 24G

ACCOUSTIC INSULATION USING OPEN CELL NEITRILE RUBBER

THERMAL INSULATION USING 9MM CLOSED CELL NITRILE RUBBER

SUPPLY & INSTALLATION OF ALUMINIUM EXTRUDED POWDER COATED SUPPLY AND RETURN AIR GRILLS

SUPPLY & INSTALLATION OF CANVAS CONNECTION

POWERON ENGINEERS