Repairs & Renovation of Old Rest House at Pardi, Ta.Pardi, Dist.Valsad. (Internal Colour Work Dinning Room False Ceiling & Miscellaneous Work)

Name of Work :-

Repairs & Renovation of Old Rest House at Pardi, Ta.Pardi, Dist.Valsad. (Internal Colour Work, Dinning

Room, False Ceiling & Miscellaneous Work)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Dismentaling tiled of stone floors laid in mortar including stacking of 3.0 Sqmt 48.21

serviceable materilas and disposal of unserviceable materials with all lead

2 Demolition and disposal of unserviceable materials with all lead and 1.00 cumt 609.26

lift.(i) Lime concrete.

3 Dismantling santtary fittings like wash basin, W.C.Pan Indian and 5.00 Nos. 405.65

European type, flushing tank etc. including stacking the materials with all

4 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings 30.00 Rmt. 75.08

and clamps including stacking the materials with all lead and lift ( for any

5 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 10.00 Nos. 187.71

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

6 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring treads 3.00 Sqmt 970.07

of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand)finishing with flush pointing in colour cement

slurry etc. complete. Colour and Shade approved by Engineer-In-Charge

7 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 11.00 Sqmt 1441.22

8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry.

8 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 5.00 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost

of all materials.

9 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 5.00 Rmt. 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost

of all materials.

10 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 20.00 Rmt. 148.12

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all

11 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 1.00 Nos 28.79

12 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 5.00 Nos 571.08

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

13 Providing and fixing screw down bib taps of following size.(B) Brass 6.00 Nos 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

14 Providing and fixing brass screw down stop tap.(A) 15mm dia. 5.00 Nos 205.83

15 Providing and fixing pillar tap, capstan head, screw down high pressure 5.00 Nos 308.73

with screws, shanks and back nuts. (i) 15mm dia.

16 Providing and fixing wsh down water closet (European type, W.C. Pan) 1.00 Nos 1303.71

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately (A) vitreous China Pattern :(i) in white

17 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of 1.00 Nos 2344.42

C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections, with inlet, outlet and

overflow pipes, 40mm dia. porcelain enamelled flush bend including

cutting holes in walls and making good the same connecting the flush

bend with cistern and closet (overflow pipe to be measured and paid for

separately)(A) Vitreous China (I) In white colour

18 Providing and fixing plastic seat and cover for wash down water closer 1.00 Nos 291.33

with C.P. brass hinges and rubber buffers. (B) Plastic seal and cover.

19 Providing and fixing Jet spray heavy duty with S.S. Braided hose 60 cm 1.00 Nos 355.52

long with wall hook and other accessories etc. completed

20 Providing and fixing wash basin with single hole for pillar tap with C.I. Or 5.00 Nos 1961.83

M.S. brackers painted white including cutting holes and making good the

same including pillar tap, Brass waste, stop cack , bottle trap and M I

fisher union fittings :(ii) Flat back wash basin 500mm x 400mm size

including all necessary fittings etc complete shade and pattern as

approved by Engineer in charge.

21 Providing and laying (two level or slopes) and jointing with stiff mixture of 55.00 Rmt. 518.84

Cement Mortar in proportion 1:1, Salt glazed stone ware pipes of pipes

150mm laying lime concrete 1:5:10 (1-Lime putty :5-Fine samd : 10-

Graded Stone aggregates 40mm nominal size) bedding for stoneware

pipes of following internal diameters with necessary formwork and curing

complete.(B) 150mm dia

22 Providing and fixing S.W. gully trap with C.I. grating brick masonry 5.00 Nos 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight (i) Square mouth traps (B) 150mm x 100mm

size P or R type

23 Removing dry or oil bound distemper by a washing and scraping and sand 926.00 Sqmt 11.30

papering the wall surface smooth including necessary repairs to scratches

24 Removing dry or oil bound distemper by a washing and scraping and sand 258.00 Sqmt 12.90

papering the ceiling surface smooth including necessary repairs to

scratches complete.

25 Applying two coats of putty & two coats of primer of approved brand and 1184.00 Sqmt 40.59

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

26 Wall painting (two coats) with plastic emulsion paint of approved brand 925.97 Sqmt 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

27 Wall painting (two coats) with plastic emulsion paint of approved brand 258.00 Sqmt 85.76

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

28 Removing, Repairing and Refixing Old existing wooden door shutter 10.00 No 1808.91

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as directed by

engineer in charge etc comp.

29 Removing, Repairing and Refixing Old existing Main wooden door shutter 3.00 No 4944.96

including fixing New Europa Main Door Lock and repairing the

shutter/frame using Randha machine and replacing old fixture and

fastening with new SS 304 grade fixtures like 3 Hinges, 1 Stoppers,

Aldrop , 2 Handle & 1 lock etc. and as directed by engineer in charge etc

30 Removing, Repairing and Refixing Old existing wooden window shutter 8.00 No 1380.67

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with New Glass and SS 304 grade

fixtures like 3 Hinges, 2 Stoppers , 2 Handle etc. and as directed by

engineer in charge etc comp.

31 Providing and fixing window having extruded aluminum Colour anodized 33.00 Sqmt 1583.95

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt , horizontal Three track member size 92mm x 31.75mm x

1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member

size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of

size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass and mosquito net with

powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc

32 Providing and fixing 35 mm thick flush door Single shutter, solid core 19.00 Sqmt 3157.26

with Shutter of Factory made & Stamped I.S 12823 Grade one ,Type one

,melamine faced three layred resin Flushed Door Having Decorative

Lamination on both sides & 12 mm T.W.Beading Around the Door,FROM

HOLDING LICENCE FOR MINIMUM 5 YEARS .and stainless steel handle

and necessary Locking system of Godrej, zinc coated hinges ,fixtures &

fastenings etc directed by engineer in charge.D2

33 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP 7.00 Sqmt 2547.22

depress panel Single shutter having extra reinforcement on sides & edges

in Gel coat finish.The core of the shutter & frame is to be filed up with

injected fire retradat grade polyurethene foam done in situ along with

embeded wooden pieces for stiffening & also taking hinges &

fintures.The whole FRP frame & shutter is to be waterproof,

weatherproof ,termite proof & resistance to mild acid/alkali.Rates are to

be inclusive of S.S hinges with necessary screws & alluminum fixtures &

fastenings & fartener sleeve.Colour and Shade approved by Engineer-In-

34 Providing & Fixing in position standard extruded approved colour 9.00 Sqmt 2131.10

anodised Aluminum Ventilator with outer frame 65 x 25 mm Stander Box

Frame @ Wt 1.094 kg/Rmt with 5mm bajari figure glass fix louvers fixed

to alluminium strip blade and 5mm thick ground glass fixed ventilation on

top including all required materials, fixtures, fastenning, labours and

equipments as per detailed drawing as directed. For Ventilators V

35 Providing and Fixing Pre Stitched Fiber Glass Mosquite Net with Fastener 38.00 Sqmt 360.57

tap in four side for all window and other opening with required all

accessories etc. complete.

36 Pro. And fixing single layer water proof gypsum board 12.5 mm thick 93.00 Sqmt 606.95

sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm

center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at

mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x

mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener,

scoch bolt connecting cleat,joining compound top coat on ceiling

incl.making necy.opening for light fitting,diffuser etc. comp. as per detail

drawing as directed

37 Excavation for foundation upto 1.50 mt depth including sorting out and 86.50 Cumt 117.08

stacking of useful materials and disposing the excavated stuff all lead

& lift(A) Loose or soft soil.

38 Excavation for foundation 1.50 mt to 3.00 mt depth including sorting out 86.50 Cumt 162.56

and stacking of useful materials and disposing the excavated stuff upto

50 mt lead (B) Dense or hard soil

39 Providing and laying controlled cement concrete M.150 and curing 9.00 Cumt 3894.07

complete including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in (A) Foundations and plinth

40 Providing and laying controlled cement concrete M.250 and curing 94.00 Cumt 4819.72

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in(A) Foundations, footings,

and Mass concrete. footing

41 Filling available excavated Earth (Excluding Rock) in trench plinth side of 71.00 Cumt 130.39

foundation . in layer not excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete

42 Providing and laying controlled cement concrete M-200 and curing 3.50 Cumt 7878.42

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts and

43 Brick work using common burnt clay building bricks crushing strength not 20.00 Cumt 4295.99

less than 35 Kg/Sq.cm. in super structure above plinth level upto floor

two level in cement mortar 1:6 (1cement : 6 fine sand) (B) Conventional

For Ground Floor

44 Providing and laying controlled cement concrete M-200 for RCC work 1.00 Cumt 6523.59

and curing complete including the cost of form work but excluding the

cost of reinforcement for reinforced concrete work in coping on Ground

45 Providing TMT Bar FE 500D reinforcement for R.C.C. work including 5282.00 KG 76.22

bending, binding and placing in position complete up to All floor Level

46 20 mm Thick sand faced cement plaster on walls upto height 10 meters 154.00 Sqmt 300.66

above ground level consisting of 12 mm Thick backing coat of c.m. 1:3 (1

cement : 3 sand) and 8 mm Thick finishing coat of c.m. 1:1 (1 cement :

sand) with 18mm wide x10mm deep Groves at juction of structure

member etc. complete.

47 Removing dry or oil bound distemper by a washing and scraping and sand 96.00 Sqmt 12.32

papering the wall surface smooth including necessary repairs to scratches

48 Wall Painting (Two coats) with weather proof acraylic emulsion (Apex or 249.60 Sqmt 114.53

equivalent type) paint of approved brand and manufacture and of

required shade on exterior wall surface to give an even shade over and

including primery coat with Alkaly resistance primer of approved brand

after thoroughly brushing surface to remove all dust and remains of

loose powdered material etc. copm. for all height

49 Demolition including stacking of serviceable materilas and disposal of 16.50 Cumt 1048.51

unserviceable materials with all lead and lift. (i) R.C.C. work

50 Demolition of Brick work and stone masonry including stacking of 73.00 Cumt 546.08

serviceable materilas and disposal of unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

In Words Sixteen Lakh Eighty Four Thousand Seventy One Rupees And Forty Five Paisa Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 1684071.45 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Credit Value of Dismentalled Materials of Amount Rs.14153.00 (In Words Fourteen Thousand One Hundred Fifty Three

Rupees And Zero Paisa Only.) shall be recovered from the 1st Running Bill of the Contractor.

2 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

3 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

4 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

5 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

6 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

7 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

8 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no

9 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

10 Contractor are advised to visit site before loading tender rate.

11 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

12 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

13 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

14 GST and Income tax TDS will be deducted at a source while making payments of bills.

15 GST will be paid extra as per Govt. amendment.

16 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

(A) materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division