SPECIAL REPAIR / REPLACEMENT OF ROOF, FLOORING,FALSE CEILING AND JOINERY IN BLDG NO-T-86,T-87 AND T-88 AT 217 TRANSIT CAMP PALCHAN UNDER AGE I R AND D MANALI

Amount

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge.

Supply and fix mild steel in Joist, channel, angle, or tee sections, Hollow or round steel tubes, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe 410 -W (GdeE- 250) quality-A, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix mild steel Windows Chajja / wind ties for roof covering including screwing bolts, etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed by Engineer-in-Charge.

All as per ser Item No 06 here-in-before but except sheets, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Pre-painted gaivatume aluminium sheet zinc coatin GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed by Engineer-in-Charge.

All as per ser Item No 09 here-in-before but one coat of synthetic enamel paint over old surface of Wall, complete all as specified and as directed by Engineer-in-Charge.

Dismantling of ceilng boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness including cover fillets, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 6 mm thick Plywood grade BWR type BB board of any size fixed with screws to timber frame as ceiling fixed flat or in sloping, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 6 mm thick Plywood grade BWR type BB board of any size fixed with screws to timber frame as ceiling fixed flat or in sloping but except ply wood , complete, all as specified and directed by Engr-in-Charge

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and as directed by Engineer-in-Charge.

Material and labour 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in subbase of floor complete all as specified and as directed by Engineer-in-Charge.

Material and labour 50mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection , complete all as specified and as directed by Engineer-in-Charge.

Material and labour machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and incl 20mm thick screed bed or bedding layer of cement mortar 1:4, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed in repairs with screws to timber frame work, complete all as specified and as directed by Engineer-in-Charge.

Material and labour Plain fillets,square,rectangular or triangular in section, clean sawn, secured with nails or brads of size exc 3sq cm and n exc 6 sq cm of second class softwood complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Second class hardwood timber framed and fixed, Clean sawn in scantling, complete all as specified and as directed by Engineer-in-Charge.

All as per ser Item No 20 here-in-before but except timber, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 4.0mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5sq.m in each pane including hacking out from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Pre-cast cement concrete block 1:3:6 type C1 (using 20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.

Material and labour Rendering 15mm thick on brickwork or concrete surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surface of wall and applying two coats of cement base paint, white or tinted complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of New/ old plastered or unplastered surface of Wall and ceiling applying two coats of Oil Bound distemper, complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) and refixing in the same opening complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm and n. exc 4 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Supply and fix pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 125 x 60mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides as per SSR Part – I complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Mild Steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Extruded aluminium alloy handles, fabricated type, 150mm size complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Aluminium anodised, barrel tower bolts of extruded section and fixed length of bolt 150mm long, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix mild steel sliding door, bolts, plate type, stove enamelled black with bright bolt not less than 12mm bore, length of bolt 250mm complete all as specified and as directed by Engineer-in-Charge.

Material and labour preparing new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed by Engineer-in-Charge.

Material and labour Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed by Engineer-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody (for refixing the same) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed by Engineer-in-Charge.

Labour only for refixing point wiring with with Copper conductor cables in PVC casing & caping for One light point or one fan point controlled by one switch with cables 1.5 sq mm size complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 40 here-in-before for one 3 pin socket outlet 5 Amps on independent boards, complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 40 here-in-before for one 3 pin socket outlet 5 Amps on same boards, complete all as specified and directed by Engineer-in-Charge.

Material and labour for Point wiring for one light point or one fan point or for one three pin socket point on independent board controlled by one switch with 1100V grade PVC insulated and unsheathed 1.5 Sqmm standard copper conductor in & incl FRLS wire incl casing & caping surface wiring with cutting, chasing and plastering and surface on ceiling with fixing arrng and continuous run 2.5 Sqmm copper earth wire incl cutting changing sunk in MS boxes 1.6mm thick duly painted with two coats of anti corrosive paint outside & aluminum inside covered with 3mm thick hylam brand sheet complete, all as specified and directed by Engineer-in-Charge.

All as per Srl item No 43 here-in-before but 2.5 sqmm PVC insulated unsheathed stranded copper conductor 1100 V grade with continuous 1.5 sqmm copper earth wire for one 3 pin socket outlet 15Amps on independent boards complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement Batten holder Flush type complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement switch piano flush button type 5 amps single pole one way complete all as specified and directed.

Supply and fix in replacement switch socket outlet combination piano type multipurpose 3 pin 5 Amps flush type single pole complete all as specified and directed.

Supply and fix in replacement switch socket outlet combination piano type multipurpose 3 pin 5 Amps & 3 pin 15 Amps flush type single pole complete all as specified.

Taking down of existing UNSV FTL/LED fitting any size complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement ceiling rose surface bakelite ISI mark two to three terminals complete all as specified.

Supply and fix Decorative ultra slim linear LED tube light fitting along with fixture 18 W complete including copper cable 23/.0076 for electric connection for fitting from ceiling rose, complete all as specified and directed by Engineer-in-Charge. MAKE: - Cat No Lamp Type 18W LED 6000K ordering code LHEXBTP7UN1W018 of Havells or equivelent in Bajaj , philips

Taking down of existing DBs any size complete all as specified and as directed by Engineer-in-Charge.

Refixing of the DB retrived from item no 13 including refixing of MCB / SPN complete all as specified and as directed by Engineer-in-Charge.

NATHU RAM AND SONS

Siya constructions