CERTAIN MISC BR AND EM REPAIRS TO ADMIN BLDGS, OFFICERS MESSES, CONFERENCE HALLS AND CERTAIN OTM ACCN IN NORTH ZONE UNDER GE NORTH BINNAGURI

S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkhats complete all as specified and as directed.

S&F rolled mild steel equal angles framed work confirming of Fe-290 (Gde-E-165) including welding, drilling for holes as necessary for fixing door frame, verandah jali, mesh and staple etc complete all as specified and directed.

S&F aluminium handles cast type anodised 150mm of size. complete all as specified and directed.

All as item No 22 above but fixed type complete all as specified and directed.

Taking down old/ rusted verandah net/jali including frame of any description etc complete all as specified and directed.

M&L for preparation of newly wall plastered surfaces and applying three coats of white wash on wall to match the existing colour as specified as directed.

M&L for preparation of newly plastered surfaces of wall by vacuum based sanding machine, applying wall care putty (multipurpose mixture shall be used for uniform and proper mixing of putty) and applying two coat of exterior acrylic emulsion paint on external surface of wall/Chajja/facials by auto roller over a coat of primer complete all as specified and directed as per manufacturers instruction complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar 1:6 for floor finishes complete all as specified and as directed.

M&L non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and directed.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including CP waste coupling, PVC connection 450 mm long, waste pipe & removing the existing Basin, cutting for and pinning ends of brackets or erecting stand. complete all as specified and directed.

M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

S & F in replacement round shape LED Surface light 12 Watt fitting for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection ,complete all as directed.

Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed .

Dismantling of Plain or profile steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings .

S&F of switch piano flush type 5/6 amps single pole one way complete all as specified and as directed.

All as per item No 99 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

All as per item No 99 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying APP base polymeric membrane, finished even and smooth without using extra cement complete all as specified and as directed.

All as per item No 99 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

Taking down carefully existing old/unsv sub main wiring of any size/description as existing at the sit including making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified and as directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.

S & F bell push flush type 5 amps, 230 volts.complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

S&F switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, white/ivory finish flush non shutter non inter locking type with and including taking down existing unserviceable, complete all as specified and as directed.

S&F in repair modular socket outlet 6/16 Amp,2/3 pin complete all as specified and as directed by Engr-in-Charge.

S&F of Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with and including taking down existing unserviceable, complete all as specified and as directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S & F lamp holder, insulated body, with back plate suitable for

S & F deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

batten/angle fittings complete all as specified and as directed.

S&F in repair modular switch 1 way,6Amp complete all as specified and as directed.

S&F in repair modular switch 1 way,16Amp complete all as specified and as directed.

S&F in repair modular socket outlet 6 Amp 2/3 pin complete all as specified and as directed by Engr-in-Charge.

S&F White cover plate with frame ,2 module

S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 120 mm including taking down existing unserviceable.

S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable.

S&F in repair hylam sheet 3 mm thick white in colour of size 200 mm x 100 mm including taking down existing unserviceable.

S&F in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bituminous primer @ 0.4 ltrs per Sqm over plastered surfaces of roof incl parapet surface. (Note :- Bituminous primer shall be "TANK MASTIC" manufactured by "EMUFALTE" manufactured by M/s Texas India Ltd. or techno commercially equivalent as approved ) (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer 3 mm thick weight not less than 3.6 Kgs per Sqm reinforced with non woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note :- (i) Laying APP based polymeric membrane shall be done torch on method or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) APP based polymeric membrane shall be "MOPLY FP 3MM" manufactured by M/S Texas India Limited or techno commercially equivalent as approved (iv) Applying two coats of Aluminium paint over APP membrane.) (V) Cutting groove in brick wall 75 mm wide and 65 mm deep and shopping horizontal face of groove with cement mortar 1:3

S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection; etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified.

All as per item No 99 here in before but for one bell point controlled by one, bell switch 5 Amps

S & F in replacement recess mounting flat panel 36 Watt LED fitting (2'X2') for Armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection ,complete all as directed.

S & F in replacement Post top lanterns 20 watt LED light fitting ,new generation, energy saving, environmental friendly, long life with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements, complete all as directed.

S&F powder coated anodized aluminum door made out hollow extruded aluminum sections as mentioned below. Each door having 02 No disk or D type handles of 200mm long 02 No aluminium tower bolt of 20mm size, 1 No mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make- Sandhu/Titz) shutter to be partly glazed with 5mm thick tinned glass and partly paneled with 12mm thick prelaminated particle board fixed with glazing clips rubber bedding/gasket anodized aluminum beading screws complete including taking down old unserviceable shutter with frame. (a) Chowkhat frame : 100 x 44 x 1.60mm (b) Shutter vertical : 100 x 44 x 1.60mm (c) Shutter lock rail : 150 x 44 x 1.60mm (d) Shutter top rail : 100 x 44 x 1.60mm

Supply and fixing in replacement Inverter LED batten 20W with square profile and polycarbonate channel, lithium Ion battery with charging time 8 Hours-10 Hours and backup time upto 4 Hours with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:6) finished even & fair complete all as specified and as directed.

M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylam sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly complete all as specified and directed for one Light point controlled by one, one way switch

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete with and including taking down old unsv one all as specified and directed incl taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified and as directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete with and including taking down old unsv one all as specified and directed incl taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified and as directed.

S&F in repair MCB, Single pole & neutral, 32 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one as specified and as directed.

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one as specified and as directed.

(e) Shutter bottom rail : 200 x 44 x 1.60mm