Construction Of Anganwadi At Village Devchadi-2, Vorakotada, Kantoliya, Motadadva-3, Shreenathgadh-2 Tal. Gondal Dist. Rajkot

Name of Work:- Construction Of Anganwadi At Village Devchadi-2, Vorakotada, Kantoliya,

Motadadva-3, Shreenathgadh-2 Tal. Gondal Dist. Rajkot

Taluka:- Gondal Rajkot

Bill Of Quantities

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

1 Excavation for foundation upto 1.5 m depth 148.00 Cum 212.52

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil

2 Providing and laying cement concrete 1:4:8 (1 44.50 Cum 2739.86

cement : 4 coarse sand : 8 hand broken stone

aggregates 40 mm nominal size) and curing etc.

complete excluding cost of form work in

foundation and plinth.

3 Providing and laying ordinary cement concrete 30.75 Cum 4682.96

1:1½:3 (M-200) using B.T. stone aggregate and

curing of concrete complete, including the cost of

form work but excluding the cost of reinforcement

for R.C.C. work in (A) Foundations, footings, base

of columns and mass concrete.

4 Providing and laying ordinary cement concrete 3.75 Cum 8204.45

1:1½:3 (M-200) using B.T. stone aggregate and

curing of concrete complete, including the cost of

form work but excluding the cost of reinforcement

for R.C.C. work in Columns up to Plinth level.

5 Providing and laying ordinary cement concrete 25.75 Cum 4584.92

1:1½:3 (M-200) using B.T. stone aggregate &

curing complete including the cost of form work

but excluding the cost of reinforcement for R.C.C.

work in Ground Beam.

6 Filling available excavated earth (excluding rock) 71.00 Cum 137.47

in trenches. plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth consolidating

each deposited layer by ramming and watering.

7 Brick work using common burnt clay building 44.50 Cum 4376.38

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B)

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

8 Filling in foundation and plinth with murrum or 145.50 Cum 299.66

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete.

9 Filling in plinth with sand under floors including 54.00 Cum 477.31

watering ramming, consolidating and dressing

10 Providing and laying cement concrete 1:2:4 (1- 25.75 Cum 3772.13

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

11 Providing and laying ordinary cement concrete 9.75 Cum 8204.45

1:1½:3 (M-200) using B.T. stone aggregate and

curing of concrete complete, including the cost of

form work but excluding the cost of reinforcement

for R.C.C. work in Columns for all floor level.

12 Brick work using common burnt clay building 109.00 Cum 4671.52

bricks having crushing strength not less than

kg/Sq.Cm. in superstructure above plinth level upto

floor two level in Cement Mortar 1:5. (1- Cement :

5 -fine sand) (B) Conventional brick etc. complete

13 Providing and laying cement concrete 1:3:6 (1- 21.25 Cum 3065.41

Cement : 3- coarse sand : 6- Hand Broken stone

aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

14 Providing and laying ordinary cement concrete 9.75 Cum 7333.41

1:1½:3 (M-200) using B.T. stone aggregate and

curing of concrete complete, including the cost of

form work but excluding the cost of reinforcement

for R.C.C. work in Lintels for all floor level.

15 Providing and laying ordinary cement concrete 25.75 Cum 6440.20

1:1½:3 (M-200) using B.T. stone aggregate and

curing of concrete complete, including the cost of

form work but excluding the cost of reinforcement

for R.C.C. work in Beams for all floor level.

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

16 Providing and laying ordinary cement concrete 32.50 Cum 6738.62

1:1½:3 (M-200) using B.T. stone aggregate and

curing of concrete complete, including the cost of

form work but excluding the cost of reinforcement

for R.C.C. work in Slab for all floor level.

17 Providing TMT Bar FE 500D reinforcement for 14237.50 Kg 77.29

R.C.C. work including bending, binding and

placing in position complete upto floor two level

18 Providing and fixing both sides polished machine 62.50 Sqmt 617.46

cut kota stone shelves / partition of single piece

(maximum 150 cm) 25 mm thick embedded into

wall with groove in cement mortar 1:2 (1 cement :

2 fine sand), including racking and finishing

smooth the surface, including joined with grey

cement, rubbing, cutting the stone as and where

required etc. completed.

19 Providing 15mm thick cement plaster in single coat 695.00 Sqmt 242.01

on Rough (Similar)side of single or half brick walls

for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3

(1-cement:3-sand) including finishing with a

floating coat of neat cement slurry for Ground

20 Providing 10 mm thick cement plaster in single 215.00 Sqmt 222.24

coat on brick / concrete on ceilings and sofits of

stairs for interior plastering upto floor two level

and finished even and smooth in (i) Cement mortar

1:3 (1-cement:3-sand) including finishing with a

floating coat of neat cement slurry Ground Floor

21 Providing 20mm thick cement plaster in single coat 845.00 Sqmt 266.51

on single or half brick walls for interior plastering

upto floor two level and finished even and smooth

in (i) Cement mortar 1:4 (1-cement:4-sand)

including finishing with a floating coat of neat

cement slurry for Ground Floor

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

22 P & L 24" x 24" vitrified 8 mm thick tile flooring 326.50 Sqmt 1546.85

over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing

on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

23 Providing and laying Ceramic tiles 6mm thick in 135.00 Sqmt 1091.96

skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

24 Providing and laying Ceramic tiles 6mm thick in 9.00 Sqmt 1017.30

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white

25 Providing and fixing 18 mm thick mirror polished 76.00 Sqmt 2186.27

Granite stone of machine cut & full round edge and

polished of approved quality in cladding on sill and

around the Doors / windows / ventilation with

mm thick cement plaster 1:3 and jointed with white

/ matching pigment cement slurry & adhesive,

including polishing & moulding of exposed edges

etc. complete for all floor level as directed by

Engineer-in-charge.

26 Constructing a Sandwich type cooking platform of 19.00 Sqmt 5442.72

60 cm width and 70 cm height resting with Granite

polished stone top and 100 mm height faces in

exposed faces with 18 mm thick of polished

Granite stone of approved colour and quality on

mm x 2 No polished Kota stone sandwich supports,

polished kota stone shelves and fixing stone using

cement mortar 1:2 (1 cement : 2 fine sand) for

sandwich and fitting at bottom & edges with water

proof rigid adhesives, including mocking necessary

grooves in walls, polishing and making edges etc.

complete as directed by Engineer-in-charge. (Only

top clear area of platform shall be measured and

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

27 Providing and fixing Stainless steel kitchen sink 5.00 No. 1173.78

Glossy ASIS 304 grade and 1 mm thick with over

all size 510 x 432 x 33 and bowl size 455 x 368 x

190 mm of approved brand as directed by Engineer-

in-charge with all fittings like C.I. or M.S. brackets

painted white / or fixing on stone base, including

cutting holes and making good the same, 32 mm

dia Brass waste and M.I. fisher union fitting,

including all necessary fittings etc. complete.

28 Providing and fixing standared extruded of 2.00 Sqmt 1175.56

alluminium section of size 63mm x 38.10mm x

1.2mm @ Wt. 0.643 Kg/Rmt with colour anodized

alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

29 Providing and fixing extruded colour anodized 39.75 Sqmt 3171.70

aluminium three track sliding window having

aluminium section having outer frame for bottom

member of size 92.00 x 31.75 x 1.30 mm size

weight of 1.07 KG / Rmt and outer frame for top

and sides members size 92.00 x 31.75 x 1.50 mm

size weight of 1.06 KG / Rmt, for shutters using top

and bottom size 40 x 18 x 1.29 mm size weight

0.456 KG / Rmt & interlock member size 40 x 18 x

1.29 mm size weight 0.456 KG / Rmt & handle

member size 40 x 18 x 1.29 mm size weight

KG / Rmt with 5 mm thick transparent bronze

colour tinted float glass for shutter and fixing wire

net shutter of Stainless Steel wire of 304-grade of

IS Gauge designation 85-G with wire of 0-56 mm

diameter as a third sliding shutter with necessary

fixtures and fastening like rubber gasket and

transparent silicon sealant glass fixing to frame etc.

complete as per drawing and instruction of

Engineer-in-charge.

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

30 Providing and fixing 35 mm thick shutter for door 30.50 Sqmt 4116.87

having factory made solid core, melamine faced,

three layered resin flushed door of approved brand

and manufacture, with 1 mm thick decorative

laminated sheet on both side with 6 mm thick and

35 mm x 35 mm specially shaped moulded teak

wood beading fixed around the door with necessary

fixtures and fastenings like S.S. butt hinges, S.S.

Aldrop, S.S. Handle size 15 cm long, stopper, door

closers arrow type etc. complete as per detail

colour & pattern approved by Engineer-in-charge.

31 Providing and fixing M.S. plain Grills (Safety 3868.00 Kg 114.74

Grill) / Shutter of required pattern to wooden

frames of window / Door etc. with M.S. flats at

required spacing and frame all-round square or

round bars with round handed bolts and nuts or by

screws, including primer coat of approved quality

and two coats of oil painting etc. complete.

32 Applying two coats of putty & two coats of primer 695.00 Sqmt 40.59

of approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

33 Wall painting (two coats) with plastic emulsion 695.00 Sqmt 88.39

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including thoroughly brushing the surface free

from mortar droppings and other foreign matter and

sand papered smooth.

34 Wall painting (two coats) with plastic emulsion 215.00 Sqmt 94.17

paint of approved brand and manufacture on ceiling

and sloping roofs to give an even shade including

thoroughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

35 Finishing wall with weather proof exterior 1390.00 Sqmt 122.14

emulsion paint on wall surface (two coats) to give

an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains

of loose powdered materials etc. complete

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

36 Providing and laying water proofing treatment on 230.50 Sqmt 1031.15

terrace with broken China mosaic tiles flooring

over average 40 mm C.C. 1:2:4 bedding for

maintaining slope for plain and curve surface &

mm to 20 mm of broken piece of ceramic / glazed

tiles (one for more colour as directed) to be laid

over cement mortar bedding of C. M. 1:3 (1 cement

: 3 sand) contain one KG of water proofing

materials per bag of OPC at plain or / and slops and

to be tempered to bring mortar ceramic up to

surface with using white cement and colour

pigment, including rounding of junctions and

extending them up to 15 cm along the wall and

curing with bends any patterns or design as per

drawing and cleaning by using oxalic acid etc.

37 Providing and fixing water closet squatting pan 5.00 No. 1545.39

(Indian type W.C. pan) size 580 mm (Including 'P'

or 'S' trap, foot rests and excluding earthwork, bed

concrete) Including providing and fixing 100 mm

size “P” or “S” trap for water closet squatting pan

including jointing the trap with the pan and soil in

cement mortar 1:1 (1 cement : 1 coarse sand)

including P & F in cement mortar 1:3 (1 cement :

coarse sand) A pair of white vitreous china 250 mm

x 130 mm x 30 mm foot rest for long pattern

squatting pan water closet, including P & F G.I.

inlet connection for flush pipe with W.C. pan (A)

Vitreous china - (i) Long pattern-white colour.

38 Providing and fixing Wash basin with single hole 5.00 No. 2318.30

for pillar tape with C.I. or M.S. brackets painted

white including cutting holes and making good the

same but excluding fittings. (A) vitreous china : (ii)

Flat back wash basin 550 mm x 400 mm size, (i) in

white colour, including fixing 32 mm dia C.P.

Brass waste pipe, 32 mm dia M. I. Fisher union,

mm dia stop tap and 15 mm dia capstan head pillar

tap, screw down high pressure with screws shanks

and back nuts & inlet & outlet connections for

wash basin etc. complete.

39 Providing erecting and fixing double coated ISI 5000.00 Litre 3.95

water tank of required capacity each with all

necessary fittings and connection etc. complete on

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

40 Providing and fixing screw down bib taps of 15.00 No. 186.83

following size.(B) Brass chromium plated screws

down Bib Tap. (i) 15mm dia.

41 Providing and fixing concealed Cock of premium 5.00 No. 808.00

make with necessary other materials and piping

connections etc. complete as directed by Engineer-

42 Providing and fixing Angle Cock of premium make 10.00 No. 606.00

with necessary other materials and piping

connections etc. complete as directed by Engineer-

43 Providing and fixing C.P. brass towel rail complete 5.00 No. 616.42

with C.P. brass brackets fixed to wooden plugs

with C.P. brass screws.(B) 600mm x 20mm size.

44 Providing and fixing PVC SWR Nahni trap IS 5.00 No. 614.19

14735 for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing

design with C.I scread down or hinged grating

including the cost of cutting and making good the

45 Providing and fixing 600mm x 450mm bevelled 5.00 No. 859.41

edge mirror of superior glass mounted on 6mm

thick A.C. sheet or plywood sheet and fixing to

wooden plug with C.P. brass screws and washers.

46 Constructing brick masonry chamber for 5.00 No. 3660.76

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(ii) Inside

dimensions 500mm x 700 mm and 450mm deep for

pipe line with one or two inlets.

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

47 Providing and fixing S.W. gully trap with C.I. 10.00 No. 1246.92

grating brick masonry chamber and water tight C.I.

cover with frame of 300mm x 300mm size (inside)

with standard weight.(i) Square mouth traps.(B)

150mm x 100mm size P or R type

48 Providing and Fixing PVC Spigot and Socket Soil 75.00 Rmt 280.23

waste and Ventilating Pipe of the following

nominal size 75 mm dia.

49 Providing and Fixing P.V.C. Spigot and Socket 50.00 Rmt 339.05

Soil waste and Ventilating Pipe of the following

nominal size 110 mm dia.

50 Providing and fixing M.S. fan clamps type 1 of 16 20.00 No. 136.75

mm. dia M.S. bar bent to shape with hooked ends

to R.C.C. slabs during laying including painting the

exposed portion of the loops all as per standard

design complete.

51 Providing laying and jointing in true line and level 150.00 Rmt 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

52 Providing laying and jointing in true line and level 100.00 Rmt 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

53 Providing Soak well of inside Dimension 3.00 mt. 5.00 No. 32629.80

Deep & 2.00 mt. Dia. Incl. Excavation, honey

comb masonary work in C.M. 1:6 incl. Covering

the top with slab and providing mainhole cover

incl. Providing vatas and curing etc. complete..

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

54 Constg Septic tank Including Excavation,B.B.C.C. 5.00 No. 24416.69

1:5:10, with brick masonarry wall in C;M 1:6

finished with Cement plaster in C;M; 1:3 incl.

partition with half brick masonary.Etc complete.

55 Bala concept drawings on walls as per the 5.00 Job 15150.00

instruction of Engineer in charge

56 Providing and fixing pre-cast Rubber Dye / steel 80.00 Sqmt 705.12

Dye inter locking concrete block 60mm thick with

grade of concrete M-300 pnumatic compressed /

vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with

sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

57 Supplying and fixing slide, seesaw and swing 5.00 Job 37875.00

combo set as per the instruction of Engineer in

58 Point wiring for Light / Fan / Bell / Primary Point 50.00 Point 299.97

with 2-1.5 Sq.mm & earth wire of 1.5 Sq.mm

(green) both are of ISI marked 1.1 kv grade FRLS

PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in /

flushed on wall /ceiling, complete with 6A Tissino

Type ISI marked flush type switch / bell push and

accessories erected on Metal / PVC Box covered

with 3 mm thick PC (Polycarbonate) / Acrylic

sheet with necessary Lamp holder / ceiling rose /

H.D. Connector as directed. (c) with oval conduit

/pvc casing capping double lock type

59 Point wiring for independent PLUG with following 30.00 Point 336.33

size mains earthwire of 1.5 sq.mm (green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe

to be erected concealed in /flushed on wall/ceiling

complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity

connection erected on Metal / PVC box covered

with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

(h) with oval conduit /pvc casing capping double

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

60 Mains with ISI marked electrolyte stranded copper 250.00 Mtr 66.66

conductor, Non PVC Zero Halogen free fire

retardant insulated copper conductor, insulated

wire (HFFR) conforms to IS-694, erected in

existing pipe with 1.5sq. mm copper conductor of

same specifications for earth continuity of

following size. [i] 3 wire 1.5 sq.mm

61 Supplying & erecting earth pit of minimum bore 5.00 No. 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I.Pipes having

Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by

highly conductive compound with high charge

dissipation suitable for following type of

applications. (a) For Electrical Installation up to

440V in normal soil Length of pipe - 1 Mtr Back

filling compound - 1 Nos Bag of 15 Kg.

62 Providing & Erecting following Shockproof 10.00 No. 31.31

tissino type accessories erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/ Metal Box. erected

on wall/ ceiling. (1) One no Single pole 6 A Switch

63 Providing & Erecting following Shockproof 10.00 No. 47.47

tissino type accessories erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/ Metal Box. erected

on wall/ ceiling. (3) One no Single pole 16 A

64 Providing & Erecting following Shockproof 10.00 No. 219.17

tissino type accessories erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/ Metal Box. erected

on wall/ ceiling. (14) Electronic Hum free EME

Socket Type Steps Fan Regulator

65 Providing & erecting Switch board for Computer 10.00 No. 332.29

or electric apparatus consisting of following items

in single board erected on PVC / Metal board

with 3 mm thick PC (Polycarbonate) / Acrylic

sheet erected as directed 1 no. 6A/16A universal

plug-switch combined. 4 nos. 6A Switch 4 nos. 6A

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

66 Providing & erecting 240 V MCB double pole 5.00 No. 330.27

switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity (B)

40 Amp. Cat.III

67 Providing and erecting Sheet Steel powder coated 5.00 No. 702.96

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, confirming to IS 13032 and BS 5486-1986

without MCB to house appropriate nos. of MCBs.

(The DBs should be used of same company of

MCB to be used) (A,a,iii)) Single phase 8 way

68 Supplying & erecting 5 stage single reverse 5.00 No. 15620.66

osmosis water purification system with M.S.

powder coated frame, prefilter housing with 'O'

ring presediment filter GAC filter, carbon filter

suitable buster DC pump capacity 80 psi, mention

with 40 psi inline type post carbon filter auto low

& high pressure switches with following size of

storage tank & LPH capacity & erected as directed

[B] 25 Ltr / Hr with 30 Ltr. Storage Tank

69 Supplying and erecting LED indoor fittings with 15.00 No. 535.30

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%, CCT

3000 K to 6500K, Luminaire efficacy>

lumens/watt ,LED LED driver efficiency > 85 % (

fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)(A)

Tube Light with integral driver (v) 36-40 Watts,

Surge-2 KV, IP-20, conventional 4 feet Cat-lll

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

70 Supplying and erecting led lamps with following 20.00 No. 404.00

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >=

0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (v) 21 to 30 watts Cat III

71 Providing and erecting Approved make Ceiling fan 15.00 No. 1596.81

with double ball bearing ISI mark with condenser

A.C. 23OV.50 c/s.1200 mm. sweep complete,

canopy erected on existing hook or clamp with

earthing. [Make shall be approved by Engineer in

72 Approved make ELCBs / RCCBs conforming to 5.00 No. 2636.10

IS: 12640 and having sensitivity of 30 mA and

Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V.

having characteristic of quick action & tripping

with all advance feature & do not incorporate any

electronic component. for following Max. rating

erected as directed (ii) 40Amps. DP Cat-II

73 Providing & erecting open well type horizontal 5.00 No. 7934.56

mono block pump set with stainless steel body

having following specification (A) 0.5 H.P. single

phase open well motor pump set having discharge

of 115 LPM @ 15 mtr. head suitable for 32 mm

dia. delivery pipe with control panel Cat. II

74 Providing and Fixing SS 304 Foldable Checking 5.00 No. 6060.00

bed having size 1.50 X 0.60 X 0.75 mm including

using of 25mm dia pipe, SS 2mm thick, matter of

25.4 (1") of 40 density, cover with regine cloth of

approved quality etc completed as directed by

Engineer incharge.

75 Providing and Placing IT wood writing table 5.00 No. 15150.00

having size 1.50 X 0.75 X 0.75 mt with one side

drawer with using of 19mm thick WP wood, top

cover with 1 mm thick wood type Formica

including using of all necessary material & labour

etc completed as directed by Engineer incharge

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

76 Providing and fixing Fabric cloth Curtain having 50.00 Mtr 858.50

length 1.8 mtr for covering of checking area

including using of alluminum sliding channel etc

complete as directed by Engineer incharge.

77 Providing and Fixing of SS 304 Hanger for bag 100.00 No. 252.50

including using all necessary materials like SS rail,

screw etc completed as directed by Engineer

78 Providing and Fixing pin cushion display board 5.00 No. 606.00

having size 1.20 X 0.75 mt including using of

alluminum section frame, 18mm thick WB

plywood, nevy blue Cushion cloth pin etc

completed as directed by Engineer Incharge.

79 Providing and fixing PVC modular kitchen cabinet 12.50 Sqmt 7575.00

consisting of base and wall units, made from high

quality rigid PVC boards (minimum 15–18 mm

thick), including shutters, shelves, drawers, SS

hinges, telescopic channels, handles, magnetic

locks, necessary fittings, cutting, fixing, complete

as per design and direction of Engineer-in-charge.

80 Providing and fixing foldable MS ladder having 250.00 Kg 110.77

0.90mt wide & 3.60mt long including rod hinge

arrangment at middle with ladder including one

coat of red oxide & two coats of oil paint etc

completed as directed by Engineer incharge.

81 Providing and fixing of hook of 10mm or 12mm 5.00 No. 303.00

dia including drilling hole, fixing of male- female

thrade fastner sealing the same with appoxy

compound, finishing the same etc complete as

directed by Engineer incharge.

82 Providing and fixing medical device & equipment 5.00 No. 1414.00

standio meter height measuring scale 2.10mt long

including fixing in wall with using of all heavy SS

screw, rail etc complete as directed by Engineer

83 Providing and supplying standard PVC (Polyvinyl 10.00 No. 1010.00

chloride) Chair with handle of approved design and

make as directed by Engineer incharge.

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

84 Providing and supplying standard PVC (Polyvinyl 10.00 No. 606.00

chloride) Stool having size 3.75 X 0.60 X 0.45mtr

of approved make as directed by Engineer

85 Providing & fixing ABC type fire extinguisher 4 kg 5.00 No. 1515.00

ISI marked complete

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

86 Supply, Installation, testing and 5.00 No. 15000.00

commissioning of a 32-inch (81cm) diagonal

LED Backlit Display Unit, featuring a

minimum resolution of Full HD

(1920x1080p), a 16:9 aspect ratio, and a

minimum brightness of 250 cd/m² with a wide

178° viewing angle. The unit must include

integrated stereo speakers (minimum 5W x 2)

and multiple input/output ports, including at

least 2 x HDMI, 1 x USB for multimedia

playback, and an audio-out jack. The scope

includes a heavy-duty wall-mount bracket or

table top stand, a functional remote control, and

all necessary cabling (minimum 1.5m HDMI

2.0 cable and power cord), ensuring full

compatibility with energy-efficiency standard

and a 100-240V power supply. The quoted rate

shall be all-inclusive, covering the cost of

the unit, secure packaging, insurance, and

transportation to the designated site location.

87 Excavation for foundation upto 1.5 M. depth 40.00 Cum 164.82

including sorting out and stacking of useful

materials and disposing of the excavated stuff upto

50 meter lead. (B) Dense or Hard soil.

88 Providing and laying cement concrete 1:2:4 (1 6.00 Cum 8593.79

cement : 2 coarse sand : 4 crushed stone

aggregates 20 mm. nominal size) and finishing

smooth with, curing etc. complete including the

cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (A) Plinth beam :

(i) Having cross-sectional area 0.05 to 0.08 Sq.M

89 Providing and laying cement concrete 1:2:4 (1 13.00 Cum 12335.51

cement : 2 coarse sand : 4 crushed stone

aggregates 20 mm. nominal size) and finishing

smooth with, curing etc. complete including the

cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (B) Columns : (i)

Having cross-sectional area 0.05 to 0.08 Sq.M

90 Providing and laying cement concrete 1:3:6 (1- 13.20 Cum 4115.73

Cement : 3- Coarse sand : 6- crushed stone

aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall

Item Item of Work Tendered Total Amount

Item Item of Work Tendered Total Amount

No. Quantity In according to

Unit Figures Estimated

91 20 mm. Thick sand faced cement plaster on walls 545.00 Sqmt 330.72

upto height 10 meters above ground level

consisting of 12 mm. Thick backing coat of c.m.

1:3 (1 cement : 3 sand) and 8 mm. Thick finishing

coat of c.m. 1:1 (1 cement : 1 sand) etc. complete.

Rupees Seventy Five Lakhs Twenty Eight Thousand Two Hundred Sixty Eight & Paise Fifty

I/we am / are willing to carry out the work at % above / below the estimated rates

(percentage should be written in words and figures % above / below) the estimated

rates as mentioned above. Amount of My / Our tender works out as under

1) Estimated amount put to Tender : Rs.75,28,268.53 1) Estimated amount put to Tender : Rs.75,28,268.53

2) Deduct % below Rs. . 2) Add % Above Rs.

3) Net Amount of Tender Rs. . 3) Total Amount of Tender Rs.

3) Net Amount of Tender Rs. . 3) Total Amount of Tender Rs.

4) In words Rs. 4) In words Rs.

* (Please strike out whichever is not applicable)

1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3) GST and Income tax TDS will be deducted at a source while making payments of bills

4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input

rate mentioned in all the tender.

Deputy Executive Engineer

Panchayat R&B Sub Dn

Gondal Signature of the Executive Engineer :