Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance VPO MANDHER TEHSIL BAIJNATH DISTT KANGRA HIMACHAL PRADESH | MANDI | HIMACHAL PRADESH | 175013 | Admitted-Finance |
| 3 | Admitted-Finance VILL P O PAROUR TEHSIL PALAMPUR DISTT KANGRA H P | KANGRA | HIMACHAL PRADESH | 176001 | Admitted-Finance |
| 4 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹14.8 L
EMD Value
₹29,650
Closing Date
19 Sept 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
District Project Management Unit HPCDP JICA ODA
District Project Manager O/o DPMU HPCDP JICA ODA Phase-II, Opposite to Soil Testing Lab, Holta at Palampur
C/o Spawn Lab at Shitake Cultivation and Training Centre, CSKHPKV-Palampur, Tehsil- Palampur, Distt.- Kangra (H.P)
2023_HPCDP_78177_1
No.AGR. DPMU. KGR. F (7)Tender/13/2022-Vol-I- 1028
Open Tender
Civil Works
Item Rate
60 days
SCTC CSKHPKV-Palampur, Tehsil- Palampur, HP
Please refer Tender documents.
14 documents required · 14 mandatory
₹1,500
District Project Manager HPCDP JICA ODA
₹29,650
District Project Management Unit HPCDP JICA ODA
10 Oct 2023
30 Aug 2023
20 Sept 2023
30 Aug 2023
19 Sept 2023
30 Aug 2023
5 Sept 2023
Amount
Providing From work with steel plates 3.15mm. thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish of Water proof plywood including centering, shuttering, strutting with wooden batten & ballies, height of proping and centring below supportin floor to ceiling . And removal of the same for insitu reinforced concrete and plain concrete work including carriage of material in all leaad and lift and heights.
Providing and laying cement concrete 1:1.5:3 (1 cement: 1.5: sand: 3:graded stone aggregate 20mm normal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of material in all lead and lift and upto all heights complete in all respect as per direction & entire satisfaction of Engineer incharge.
Providing mild steel/Tor Steel reinforcement for R.C.C. work including bending, binding also cost of Binding wire and placing in position complete upto all floor level including carriage of material in all lead and lift complete in all respect as per direction & entire satisfaction of Engineer incharge.
Second class brick masonary in common burnt clay building bricks in superstructure in Cement Mortar 1:4 (1cement: 4 sand) including carriage of materials in all lead, lift and upto all heights complete in all respect as per direction & entire satisfaction of Engineer incharge.
Half Brick Masonry in common burnt clay building bricks in Cement mortar 1:4( 1 Cement:4 Sand) 2nd Class brick work complete in all respect as per direction & entire satisfaction of Engineer incharge.
Providing and fixing 0.60mm (zero point sixty millimeter) thick pre-painted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified poly ster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5microns over 5 microns primer coating including fixing with pre-painted iron Jor L hooks, bolts and nuts 6mm ( six milimeter) dia metre with pre-painted limpet and rubber washers complete with all accessories.as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges complete in all respect as per direction & entire satisfaction of Engineer incharge.
Steel work welded in built up sections, trusses and framed work, including cutting, welding, hoisting in all heights and levels, fixing in position and applying a priming coat of red lead paint complete:-In gratings framed guard bars, ladders, railing, brackets and similar class workas per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges complete in all respect as per direction & entire satisfaction of Engineer incharge.
Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design.0.63mm thick sheet.
Providing and fixing M.S. BP sheet 1.66mm(one point sixty six milimeter) to 2mm(two milimeter) thick in eaves board/facia/soffits/ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately).as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges complete in all respect as per direction & entire satisfaction of Engineer incharge.
Providing and fixing 5 ( five) mm thick Asbestos Cement board / AC cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) as per H.P. PWD. Spesification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges complete in all respect as per direction & entire satisfaction of Engineer incharge.
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.
15 mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering up to floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth . in CM1:4 complete in all respect as per direction & entire satisfaction of Engineer incharge.
Providing and fixing anodised aluminium work for door, window ,ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fastenrs i/c necessary filling up of gaps at junctions, at top , bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleast angle, aluminium, snap beading for glazing/ panelling C.P. brass / stainless steel screws complete as per Architectural Drawings and the direction of the Engineer -in Charge. Including carriage of material in all lead and lifts (JINDAL Make)
For door window and ventilator and glazed partition frames. Including carriage of material in all lead and lifts
For shutter of doors windows and ventilators including providing and fixing hinges/piovts and making provisions for fixing of fitting where ever required including the cost of PVC/neoprene gaskets as required (fitting and glazing/panelling shall be paid for separately) Including carriage of material in all lead and lifts
Providing & fixing glazing in aluminium door, window, ventilator shutters & partition etc with PVC/ neoprene gaskets etc complete as per the architectural drawing & the direction of the Engineer-in -Charge (cost of aliminnium snape beading shail be paid in basic item) Including carriage of material in all lead and lifts. (JINDAL make)
Glazing with glass panes of 5.5mm thickness (Make - Saint Gobain or Modi guard) (weight not less than 13.75 kg/sqm.) including carriage of materials in all lead and lifts
Pre-laminated with decorative lamination on both side exterior Grade-I MDF Board 12 mm thick confirming to IS:14587
Providing and fixing anodized aluminium sliding door bolts (JINDAL make or equivalent) anodized colour and transparent or dyed to required colour shade with bolts and nuts screws etc. Complete. Including carriage of material in all lead and lifts 300x16mm
Providing and fixing aluminium tower bolts (berrel type) (JINDAL makeor equivalent) anodized trans parent or dyed to required shade and colour with screws etc. Complete. Including carriage of material in all lead and lifts
(DOOR)200x10mm
(WINDOW)150x10mm
Providing and fixing aluminium handles 125 mm(JINDAL make or equivalent) anodized transparent or dyed to required colour & shade with necessary screws etc. Complete. Including carriage of material in all lead and lifts
Providing and fixing 100mm bright finished brass floor door stopper (KICH or ACME make) with rubber cushion screws etcetra to suit shutter thickness complete. Including carriage of material in all lead and lifts
Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Including carriage of material in all lead and lifts (KICH or ACME make)
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo JINDAL make or equivalent) embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Including carriage of material in all lead and lifts
Applying Birla wall care putty over plaster surface after throughly brushing the surface free from mortar drops , dust, loose materials and other foreign matters and papered smooth to give final matter finish to the surface completeIncluding carriage of material in all lead, lifts upto all heights
Distempering two coats with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.including carriage of material in all leads, lifts and height
Providing and fixing MS fan clamp type - I pf 16 mm dia MS bar bent to shape witjh hooked ends in RCC slab during laying including painting the exposed portion of loop, all as per standard design complete
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 ltrs net capacity tank.
Providing and fixing G.I. pipes 32mm dia (Medium)of ISI marked complete with G.I. fittings including trenching and refilling etc.
Providing and fixing G.I. pipes 25mm dia (Medium)of ISI marked complete with G.I. fittings including trenching and refilling etc.
Providing and fixing vitreous china wash basin with single/double holes for pillar tap with C.I. or M.S. brackets painted white including holes and making good the same but excluding fittings confirming to BIS specification including carriage of material in all leads and lifts:- Flat back 550mmx400mm
Providing and fixing C.P. brass waste for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifts.
Providing and fixing M.I. union for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifs.
Providing and fixing P.V.C. plastic waste pipe for wash basin or sink of following size BIS specification including carriage of material in all leads and lifts.32mm mm dia.
Providing and fixing C.P. brass bib tap with capastan head including carriage of material in all leads and lifts confirming to BIS specification:- 15mm dia.
Providing and fixing C.P. brass angle valve 15mm dia confirming to BIS specification including carriage of material in all leds and lifts.
Providing & Fixing CP brass soap dish with CP brackets fixed to wodden plugs with CP brass screw
Providing and fixing C.P. stop cocks confirming to BIS specification including carriage of material in all leads and lifts:- 15mm dia.
Providing and fixing C.P. Brass concealed stop cock 15mm dia (confirming to BIS specification) including carriage of material in all leads and lifts.
Providing and fixing PVC connection pipe with brass union 45 cm length 15mm nominal bore including carriage of material in all leads and lifts confirming to BIS specification.
Providing and fixing brass full way valve with wheel confirming to BIS specification including carriage of material in all leads and lifts:-
15mm nominal size
20mm nominal size.
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.
Group C.
Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
Supplying and fixing bakelite batten/angle holder including connections etc. as required.
Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.
Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-
Single pole. Cat-A.
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 Amps. Cat-A.
63 Amps. Cat-B.
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-
Single door-12 way
Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63 Amps. Cat-A.
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-
Armoured cable 6 sq. mm (twin core)
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-
Ceiling Fan 1400 mm sweep, Category-A
Providing and fixing shock proof slim decorative extruded fixture with domestic electronic ballast, suitable for 36 watt FTL (T8), complete with all accessories (including the T-8 Tube), connections, testing and commissioning etc. as required.
1 x36 watt-FTL(T8) (Category-A)
Supplying and fixing of surface/recess mounting ceiling fitting of all sizes and shapes, containing one No. thread type CFL lamp holder (s), complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.
Ceiling fitting, surface type (Category-A)
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-
Exhaust Fan, Light duty, (Domestic) 300 mm sweep
ABHISHEK KAUL
Sahil Sharma
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .