Providing LWSS Group of Panchyat under Iph Sub Divsion Nihiri in GP Jaral Marhara

Amount

Cutting in earth work and disposal of excavated earth upto lead of 20 mtrs. in pick work 80% and Jumper 20% complete in all respect in all leads and lifts.

Excavation in foundation trenches etc. in earth all kinds of soil such as pick work jumper work blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming/ chiselling of sides and bed stacking the excavated soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:6:12(1cement :6 sand: 12graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:4:8(1cement :4 sand: 8graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Randum rubble masonary polygonal rubble masonary (uncoursed brought to courses in walls with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1cement: 6 sand: 12 graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1cement: 6 sand) in breast wall and retaining wall including all leads and lifts.

Providing and laying cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 40mm nominal size with 15% plum and curing complete excluding the cost of form work in retaining wall/ breast wall. The size of plum shall usually be 150mm to 300mm in all respect and as per direction and to the entire satisfaction of Engineer-in-charge.

Providing and laying cement concrete 1:3:6(1cement :3 sand: 6graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete in M30 grade but not lesser than 1:1:2 (1 cement :1 sand : 2 graded stone aggregate 20mm nominal size ) and curing complete excluding cost of form work and reinforcement and reinforced concrete work in:-(a) foundation and plinth in all leads and lifts.

(b) Wall (any thickness but not less than 0.1m thickness) attached pillasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level.

Providing form work with steel plates 3.15mm thick welded with angles iron in frame 30x30x5mm so as to give a fair finish including certring shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ reinforced concrete & plain concrete work in all leads and lifts in:-(a) Vertical surface such as walls(any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like

(b) Foundation ,footings bases of columns and the like mass concrete in all leads and lifts

(c) Flat surfaces such as soffits of suspended floors,roofs, landings and the like in(a) floor etc. upto any thickness.

Brick work using common burnt clay building bricks in foundation and plinth upto floor two level in cement mortar 1:4(1cement:4sand) in all leads and lifts. Ist class bricks

Half brick masonary in common burnt clay building bricks in cement moror 1:4 (1:4 (1cement : 4 sand) in all leads and lifts.

Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including black enamelled iron but hinges with necessary screws(40mm thick) 2nd class dedoar wood in all leads and lifts..

Providing and fixing wire gague shutters using galvanised MS wire gauge of IS qauge designation 85G with eire of dia 0.56mm for doors windows and clearstory windows including bright finished black enamelled iron hinges with necessary screws 40mm thick 2nd class deodar wood.

Providing and fixing MS grills of required pattern in wooden frame of window etc. with M.S. flats, square or round bars with round headed bolts and nuts by screws plain grills in all leads and lifts.

Providing and laying cement concrete 1:2:4(1Cement :2 sand:4 graded crushed stone aggregate 20mm nominal size and curing completre excluding the cost of form work and reinforcement for reinforced concrete work in all leads and lifts in :- a)Suspended floors, roofs, landing, shelves and their supports balconies, lintels, beams girders bresumers and cantilevers upto all floor two level .

(b) Foundation ,footings bases of columns and the like mass concrete in all leads and lifts

(b) Wall (any thickness but not less than 0.1m thickness) attached pillasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level.

15mm cement plaster in single coat on rough side of brick/ concrete/ stone walls for interior plastering upto floor two levels including arrises internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) in all leads and lifts.

20mm cement plaster in single coat on rough side of brick/ concrete/ stone walls for interior plastering upto floor two levels including arrises internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) in all leads and lifts.

6mm cement plaster to ceiling (a) in cement mortar 1:3( 1cement :3 sand) complete in all respect in all leads and lifts.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought , framed and fixed in position 2nd class deodar wood in all leads and lifts.

Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink.

Providing and laying cement concrete 1:1.5:3 (one cement :one and half sand : three graded crushed stone aggregate 20mm nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in all leads and lifts in (a) Foundation ,footings bases of columns and the like mass concrete including all leads and lifts

(b) walls any thickness but not less than 0.1 mtrs. thickness attached pillasters , plinths and string courses etc.from top of foundation level upto floor two level in including all leads and lifts .

( c) Suspended floors, roofs, landing, shelves and their supports balconies, lintels, beams girders bresumers and cantilevers upto all floor two level .

Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white complete in all respect in all leads and lifts

White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt , dust and other foreign matters.

(b )White washing with lime on ceiling or slopping roof.

Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to give an even shade sand papered smooth.

Providing 40x3mm iron hold fast 40cm long including fixing to frame with 10cm dia bolts, nuts and wooden plugs and embending in CC block 30x10x15cm 1:3:6(1cement :3sand:6 graded stone aggregate 20mm nominal size)

Providing and fixing precast concrete manhole cover & frame confirming to IS: 12593-1988 Part-1 and IS: 12592-1991, part-II, 560mm diameter, medium duty complete in all respect.

Providing and fixing anodized aluminium sliding door bolts with bolts and nuts screws etc. complete.(i) 250 x16 mm

(ii) 300x16mm

Providing and fixing anodised aluminium tower bolts ( barrel type) with screws etc. complete.(i) 250 x 10 mm

(ii) 200x10mm

Providing and fixing anodised aluminium handles with necessary screws etc. complete.(i) 125mm

Providing and fixing Oxidized MS hooks and eyes

Providing and fixing MS sliding door bolts with bolts and nuts screws etc. complete.(i) 300x16mm

Providing and fixing MS tower bolts ( barrel type) with screws etc. complete.(i) 250 x 10 mm

(ii) 200x10mm

Providing and fixing anodised aluminium handles with necessary screws etc. complete.(i) 125mm

Fixing of GI pipe light grade for inlet, scour and over flow pipe (Labour rate) of following dias in all leads and lifts.(i) 50mm dia

(ii) 65mm dia

(iii) 80mm dia

Providing and fixing Gun Metal wheel valves with hand wheel complete in all respect as per the entire satisfaction of the Engineer-in-charge.(i) 50mm dia

(ii) 80mm dia

Bolder filling behind retaining wall under floor within all leads and lifits complete in all respect.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint: in grauting, framed guard bar, ladders, railing brackets and similar works in all leads and lifts.

Cement concrete flooring 1:2:4 (1cement:2sand: 4 graded crushed stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement in all leads and lifts. (a) 40mm thick

Pointing brick work with cement mortar 1:3 ( 1 cement :3 sand) Raisied and cut complete in all respect.

Providing plinth protection 50 mm thick in cement concrete 1:3:6 ( 1 cement, 3 sand,6 graded stone aggregate 20 mm nominal size ) with in all leads and lifts complete in all respect.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level in all leads and lifts.

Providing and fixing 3.15mm thick MS sheet man hole cover fixed with 50x50x6mm angle iron frame 500x500mm with welding including hold fast 25x6mm 150mm long, handles 150mm long 8mm dia bar and locking arrangement complete in all leads and lifts.

White glazed tiles 6mm thick in flooring cement mortar 1:3 ( 1 cement : 3 sand) finished with flush pointing in white cement

White glazed tiles 6mm thick in skirting risers of steps and dado 12mm thick cement mortar 1:3 ( 1 cement : 3 sand) jointed with cement slurrry

Manufacturing, supplying, fabrication and fixing of MS fabricated protection panel 750mmx750mm made with MS angle 40x40x4mm for frame, MS angle 30x30x3mm for cover, MS flat 25x5mm for fixing of sliding door bolt and MS sheet 4.00mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS angle MS flat & MS sheet embedding in RCC slab by drilling holes in MS angle & in RCC slab provision for providing and fixing sliding door nbolt 300x16mm, MS handle 100mm, Lock and applying a coat of red lead paint & painting two coat with steel paint (Firoza Blue) complete job in all repsdct in all leads and lifts and to the entire satisfaction of the Engineer-in-charge.

1.80 metre high fencing with 2.50 metre angle iron posts 50x50x6mm 2.50 metre centre to centre with nine horizontal lines and two diagonal of galvanised mild steel barbed wire (IS: 278: 1962 type-I) weighting 9.38 kg/100 metre strained and fixed to posts with 6.1 staples including cost of excavation, post, struts and straining bolts embended in cement concrete 1:3:6 (1 cement : 3 sand:6 graded stone aggregate 20mm nominal size) and curing complete in all respect and to the entire satisfaction of the Engineer-in-charge.

Providing and fixing bulk meter of reputed make with upto date latest ammendments in all leads and lifts.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.Group C.

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.i) 2 x 1.5 Sq. mm.

ii) 2 x 4.00 Sq. mm.

Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/covers including connections etc. as required.

Supplying and fixing 2 way 5/6 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.

Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/covers including connections etc. as required.

Supplying and fixing 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.

Supplying and fixing wooden box of following size (nominal) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required.(a) 229 mm.x 102 mm.x 60 mm. deep

(b) 203 mm.x152 mm.x 60 mm. deep

Supplying and fixing ceiling rose on existing junction box/ wooden block including connections etc. as required.

Supplying and fixing plain pandent with 16/20 mm twin twisted, flexible PVC insulated copper cable and backelite pendant holder including connections, etc. as required.

Supplying and Fixing 5 Amps to 32 Amps rating, 240 Volts, L series miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required Cat - A. (Single Pole)

Supplying and Fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 Volts on surface/ recess, complete with tinned copper busbar, netural link, earthbar, dibnbar, detachable gland plates, inter connections, i/c painting, earthing etc. as required busbar 8 way.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (63 amp. CAT - A)

Providing, installing, testing and commissioning of ceiling fan and regulator i/c wiring the down rod of standard length (upto 30 Cm with 1.5 Sqmm PVC insulated copper conductor signle core cable etc. as required.Ceiling fan 1400 mm sweep category A

Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28 watt FTL (T5), complete with all accessories (including one No. T-5 Tube), connections, testing and commissioning etc. as required. 1 x28 watt-FTL(T5) (Category-A)

Providing and Fixing LED Flood Light watt mentioned below (OREVA make) complete in all respect in all leads and lifts.

Providing and Supplying CFL 1 x 23 watt of reputed make in all leads and lifts.

Providing and Supplying of CFL 1 x 5 watt in all of reputed make in leads and lifts.

Providing and fixing two core service wire 6 Sqmm thick.

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges, jump lock jamb, beed and if required angle threshold of mild steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel but things 2.5mm thick with gaurds, olock strike plate and shock as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-charge.

Providing and fixing automatic flushing cistern with a pair of CI or MS bracket complete with fitting including CI Syphonic apprature masquits proof lid, CP brass unions and coupling for connecting with inlet outlet and over flow pipes including cutting holes and making good the same Over flow pipe to be measured and paid for seperately (Viterous china 5 liters capacity

Providing and fixing vitreous china wash down water closet (Indian Type, W.C pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1 : 1 ( 1 cement 1 sand) ( Seat and cover to be measured and paid for separately) (White colour)

Providing and fixing 100 mm size P or S trap for water closet ( Squatting Pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( 1cement : 1 sand) Sand cast iron

Providing & fixing viterious china wash basin with single hole for pillar tap with CI or MS bracket painted white including cutting hole including good the same excluding fitting Cera sanitary work (cornet) white 550x400 white

Providing and fixing viterious china padestral for wash basin complete recessed at the basic for reception of pipe and fittings Cera sanitary work (carnet) white (Viterious China in White Colour)

Providing and Fixing of water storage tank sintex having of capacity 500 liters with necessary fittings including over flow pipes, scour pipes etc. inlet and outlet and inside paint of required size for inlet or outlet and inside paint of approved quality complete including hoisting complete in all respects.

Providing and fixing on wall face PVC (D - Plast) rain water pipes of working pressure not less 4.5 Kg/Sqcm including fitting the joints with approved adhesive complete with in all leads , lifts and carriage of materials.110 mm nominal bore.

Providing and fixing on wall faces PVC door bend (D-Plast) with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive complete.75 mm nominal bore.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fittings and clamp including making good the wall ceiling and floor in all leads and lifts.) 15 mm nominal bore

Providing and fixing full way wheel valve 15 mm dia Gun metal.

Providing and fixing cast iron spun soil waste and ventilating pipe lead caulked joint to be measured and paid for separately 100mm dia with C.I cowl 100 mm dia nominal size.

Providing and fixing brass bib tap (superior qualityor heavy type) 15 mm dia.

Providing & Fixing CP Brass Soap Dish with CP breckets fixed to wodden plugs with CP brass screws complete in all respect in all leads and lifts.

Providing installation & commissioning of gaseouos type fully vaccum chlorination system having 0-1.0 kg per hour chlorine gas feeding capacity of PENWALT(USA) / ECOCHLOR (USA) / ENCHLOR (USA)/Jasco (USA) make. The system shall have vacuum regulator with inbuilt Filter and Pressure Gauge, in-built Measuring Glass with dose rate adjuster, Vacuum ejector, ejector Non Return Valve, 4.0 m long PE tubing (As Vacuum and Vent tubing), 32 mm Spanner, Ammonia Solution etc. in all leads and lifts and to the entire satisfaction of Engineer-in-charge

(i) Chlorine Gas Injector

Providing installation & commissioning single phase monoblock pump 1.5 to 2.0 HP of required discharge capacity with Motor of Kirloskar/Crompton Greaves make with common steel fabricated base frame duly grouted at site including starter and cabling including all leads and lifts and as per entire satisfaction of Engineer - in - charge

Providing installation & commissioning of ISI marked PVC pipe & fittings, ball valves, Lead washers, O-Rings, G.I. pipe and fitting for installation and grouting of steel stand for ejector of gaseous type chlorination system complete in all respect including all leads and lifts and as per entire satisfaction of Engineer - in - charge

Providing & Installation of gas filled chlorine gas cylinder of 100 kg capacity as per BIS standard duly certified by the petroleum and explosive safety organization Govt. of India for filling of chlorine gas required for the scheme including all leads and lifts and as per entire satisfaction of Engineer-in-charge

Providing and supplying of sefty kit complete in all respect.

Providing and laying in retaining wall and breast wall 10.00 kg/cm2 working pressure unplasticized PVC pipes/confirming to IS: 4985-1968) to make weep holes complete including making good the walls. (a) 100mm nominal bore.

Dogra Construction Company Pvt Ltd