Repair work of bus stop shelter and other boards.

Amount

Providing and laying factory made precast cement concrete kerb stone of approved design of Hindustan or equivalent make of all colours having size 30 cm x 30 cm x 15 cm complete including jointing with cement mortar 1:4 fine finished and including painting as per direction of Engineer in charge.The complete work should be executed as per direction and the entire satisfaction of engineer in-charge.

Providing and fixing various member of material shall be austenltlo stainless steel of grade 1.4301 (widely known as 304) it shall contain 17-18% chramium and 8-11% nickel (as per Specification). The complete work should be executed as per direction and the entire satisfaction of engineer in-charge.

Providing and fixing 10mm thick polycarbonate multiwall sheet of bronze colour, fixed to roof purlins with top and bottom aluminium profile (anodised as per approved color and shade) fittings and EPDM gasket as in standard make Alcox fittings or per manufacturer recomendations. Minimum of 35% light transmission and 55% sotar transmission. Lexan Thermoclear Sun XP sheet LTC 10/2RS1700 (bronze) from GE structured products or equivalent. The complete work should be executed as per direction and the entire satisfaction of engineer in-charge.

Providing and pasting at site high grade printed vinyl with bus shelter name logo, routa numbers etc., on one sides of the front facia information board. The vinyl shall be minimum 150 micorn thick, of 3M or equivalent make with minimum 6 year warranty. The complete work should be executed as per direction and the entire satisfaction of engineer in-charge.

Providing and fixing 5mm thick scratch, flame and vandal resistant clear polycarbonate sheet on central advertisement panel, clear lexan marguard sheet from GE plasticcs or equivalent product. The complete work should be executed as per direction and the entire satisfaction of engineer in-charge.

Holding down anchor bolts- 20 mm dia 350 long with bolt head and top 75mm threaded portion with nut and washers for balanding and anchorling all complete as required. The complete work should be executed as per direction and the entire satisfaction of engineer in-charge.

Providing and fixing medium grade MS junction boxes in cast in situ foundation beam of 150x150mm size. The complete work should be executed as per direction and the entire satisfaction of engineer in-charge.

Supply of Hi- Intensity (Hi In) retro- reflective sheeting singn plate made out of 2.00 mm thick aluminum sheet, background to be fully covered with Green Hi-In. retro reflective sheeting after the etching treatment, of aluminium sheet, with letter/matter in HI-In retro- reflective sheeting. The back side of aluminium sheet is painted with Grey epoxy paint and supported with a frame of angle iron 40x40x5 with the help of stainless steel nut bolts / aluminum ivets, the work should be completed as per direction given by engineer incharge

Supply of Hi- Intensity (Hi In) retro- reflective sheeting singn plate made out of 3.00 mm thick aluminum sheet, background to be fully covered with Green Hi-In. retro reflective sheeting after the etching treatment, of aluminium sheet, with letter/matter in HI-In retro- reflective sheeting. The back side of aluminium sheet is painted with Grey epoxy paint and supported with a frame of angle iron 40x40x5 with the help of stainless steel nut bolts / aluminum ivets, the work should be completed as per direction given by engineer incharge