Construction of Sanskriti Sadan at Motipur, District Mandi HP SH Supply, Erection, Testing and Commissioning of Video System in Auditorium therein

Amount

SITC of Indoor LED Screen :- Supply, erection, testing & commissioning of Indoor type LED Screen based on Indoor type LED Modules with magnectic frame and front maintainence. The Screen will be able to connect with PC or play through attached memory disk at any desired moment complete in all respects as per the following features: Outer Frame shall be installed with MS for the magnetic modules. Other technical specifications:

Screen area :- Minimum 27.55 sq m. or bigger

Display size (Minimum) (W X H) 7424 x 3712 mm or bigger

Pixel Pitch: 4mm or better (Lower pitch is regarded as better)

LED Type:- SMD 2121

LED configuration:- RGB 3 in 1 SMD

Pixel Density:- Min. 62,500 pixels/ ㎡or higher

Half Gain Horizontal / Vertical Viewing Angle:- H 120 deg / V 120 deg or better

Screen Resolution:- 1856 X 928 or better

Module Size & Resolution:- 256mm x 128mm & 64x32

Drive Mode :- 1/16 scans or better

Power Input :- 100 ~ 240 VAC

Brightness (Calibrated):- Minmum 1200cd/㎡

Minimum Viewing Distance :- 3 meters

Gray scale processing :- 16 Bit or better

Temp. range :- -20 to +50 degree Celsius or better

Refresh Rate :- >50 Hz or better

Maximum power consumption :- 900w/sqm or lower

Dimming capability :- 256 levels

Brightness Control :- 0-255 levels

Lifetime :- 1,00,000 hours

International Safety Certifications (Mandatory to submit along with the bid):- CE certification for Compliance to CE Under Standards, FCC Certification for Compliance to FCC For Electro Magnetic Emission which may not cause harmful interference, and must not accept any interference received Under FCC Standard

Quality/Health & Safety/ Environmental Certifications of OEM/OEM subsidiary in India (Copy to be submitted along with the bid:- Quality Management System 9001:2015,

Contrast Ratio:- 4000:1 or better

Access For Maintenance:- Front & Rear

IP Level:- IP54

Working Tem. :- -10 to +50 degree Celsius or better

Working Hum. :- 10%-80%RH (Without Condensation)

Driving IC:- MBI 5124

Input power frequency :- 50/60 Hz

Input voltage :- 110 ~ 240 Volt.

Ingress protection :- IP54 Back access

Operating temperature :- 0 to +50 degree Celsius or better

Operating humidity :- 10% ~ 90%

Warranty :- Three year

Make: Falkon/Christie/Barco/Sygnus/Delta

SITC of LED Video Wall Processor:- Supply, Installation, Testing and comissioning of LED videowall Processor with following features-Seamless switching between any source, Image enhancement,Transition effects,Split function,PIP from any source in any position andsize,On board EDID management, HDCP compliant, Easy, intuitive operation, Add a wide range of input options to suit particular requirements, Optional audio management module.

Display & Controller:- LED Tiles, LED Controller and LED Video Processor should be from the same manufacturer

Display controller:- Windows based Controller to control required displays with required 6 universalinputs & min 2 outputs along with necessary software’s

Chassis :- 19” industrial Rack mount , Lockable front door to protect drives

Operating System Platform :- Window

Networking :- Dual-port Gigabit Ethernet Controller inbuilt , Supports Add on copper/ optical fiber adapters

Input/ Output supported:- Serial ATA, LAN, 2x RJ45 LAN ports, USB 2.0 port

Cooling:- Forced cooling

Indicators :- LED’s for HDD activity and Power status

Switches :- Power On/ Off and System Reset

Accessories :- DVD + RW, Keyboard and mouse

Voltage :- 100-240V @ 50/60 Hz

Scalability :- Display multiple source windows in any size, anywhere on the wall

Control functions:- Brightness / contrast / saturation/ Hue/ Filtering/ Crop / rotate

Inputs :- 6 Universal input

Outputs:- 1 DVI outputs (each must support 1920x 1200 resolution)

Resolution support :- DVI: 1920x1200 RGB: 2048x1536

Accessories:- DVD-R,DVD+RW,, Keyboard, mouse

Power Supply:- (1 + 1) Redundant AC-DC high-efficiency power supply , AC Voltage 100 - 240V, 50-60Hz

Operating Conditions :- Operating Temperature: 10° to 40°C (50° to 95°F), Non-operating Temperature: -40° to 70°C (-40° to 158°F), Humidity: 10 – 90% non-condensing

Make: Falkon/Christie/Barco/Sygnus/Delta

Supply, Installation, Testing and comissioning of 4 in 1 out Switcher: HDMI Input/Output Resolution Up to 4Kx2K@60Hz 4:4:4, Output (1) AUDIO, Output Connector (1), 3.5mm mini stereo audio jack, Audio Format PCM, Audio Output Impedance 70 Ohms, Frequency Response 20Hz to 20kHz, ±3dB, Bandwidth 18Gbps. Make: Kramer/ Extron/Crestron/sprolink/AMX

Supply, Installation, Testing and comissioning of Table mount cable cubby. Make: Custom

Supply, Installation, Testing and comissioning of Wall mount cable cubby. Make: Custom

Supply, Installation, Testing and comissioning of cat-6 to HDMI transmitter & Receiver: 4K60 4:2:0 HDMI HDCP 2.2 Transmitter with RS–232 & IR over Long–Reach HDBaseT, HDBaseT 1.0 transmitter Up to 70m (230ft) at 1080p, Up to 40m (130ft) at 4K@60Hz (4:2:0), Up to 4K@60Hz (4:2:0) 24bpp video resolution Control extension. Make: Kramer/ Extron/Crestron/sprolink/AMX

Supply & Laying of 15m HDMI cable Make: Kramer/ Extron/Crestron/sprolink/AMX

Supply & Laying of 3m HDMI cable Make: Kramer/ Extron /Crestron/ sprolink/ AMX

Supply & Laying of cat-6 cable. Make: Molex/Panduit/ Systamax

Supply & Laying of 3 core 1.5 sq.mm Power cable. Make: Polycab / Hawells / Finolex

Supply & Laying of 25mm PVC Conduit including its accessories. Make: BEC/ Diplast/Polyplast

Supply, Installation, Testing & Commissioning of connectors & MCB (xlr and speakon). complete in all respect as required. Make: Amphenol / Neutrik / Krystal

Supply, Installation, Testing & Commissioning of 17U Equipment rack complete in all respect as required. Makes: HCL/Valrack/Comrack

Insat Techno Services

Bidder Name

Insat Techno Services