Improvements of Panchayat Office Building

Amount

Maintenance of Panchayath Office

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

OD350429/2022-2023:Providing and fixing precoated galvanised iron sheet roofing accessories 0.35 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete: Ridges plain (500-600 mm)

OD209289/2022-2023:Roofing with GI hard colour powder coated trafford sheets 0.35mm thick (+/-0.05mm) with overlaps of 150 mm at ends and GI hook or crank C.I bolts and nuts including plain washers and bitumen washers etc complete

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

21.18:Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

OD341828/2022-2023:Supplying and fixing 150mm dia PVC rainwater gutter semi circular section including fitting with 32cm *5mm MS flat supporters at 1m intervals etc complete

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

14.67.1:Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:Old work ( Two or more coats applied @ 1.43 ltr/10 sqm) over existing cement paint surface

50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

Cabins for Panchayat members and Painting

15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

2.34.1:Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%

OD355899/2022-2023:Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

OD282063/2022-2023:TABLE 1.1X.6m : Supplying and fixing table with 18 mm MDF using an approved brand and manufacturer placed vertically and horizontal at external faces and as per specification and Pre-laminated with decorative lamination one side and other side balancing lamination with exterior Grade-I MDF Board 18mm thick confirming to IS:14587 to clerical staffs. One counter 110 cm x 60 cm. The counter shall have a height of 75 cm. The width of counter top plane is 60 The Counter top edge thickness is 36 mm with top laminated sheets of Action (ISI) or an approved brand Exterior Quality/ Green Panelmax or an approved brand and manufacturer pre laminated MDF boards of Grade I Exterior Quality grooving and curving finish with polishing match to counter curvature. The Counter outside to be finished with wooden putty and teak polish and painting at counter bottom and inside. The front portion of the counter and other exposed faces of the counter work shall be curved design and graved finished and provided with teak melamin spray polish finish etc including locking arrangements with Godrej Lock or an approved brand and manufacture, Handle, file shelf, . The slides of the drawer is Telescopic Disc slides of GODREJ or an approved brand and manufacture made as directed by the engineer in charge.

OD282153/2022-2023:Providing and fixing partition made of 8mm century ply wood BWR grade all outer face provided with good quality lamination sheet including all fittings.

OD282234/2022-2023:Providing and fixing 10 mm glass partition including moulding of all edges.drilling holes for fixing stainless steel patches, fixing D brackets, also pasting etching sticker for smooth appearance including all charges etc complete.

21.18:Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

11.41.1:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm.

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Bidder Name

PRADEEP RADHAKIRHNAKURUP