Providing LWSS to PC habitation under GP Burmapapri, Koulanwala Bhood, Palion, Nahan and Bankala in Tehsil Nahan Distt. Sirmour HP

Amount

Excavation in drains and channels etc.in earth work for pipes up to all depths in all classification of earthwork such as pick work, jumper work, saturated soil including bailing or pumping out water, chiseling soft / hard rock in all lifts including jungle clearance wherever required, trimming & dressing of sides, leveling of beds to correct grade including shoring/struting, planking, timbering & dewatering wherever required stacking the useable/unuseable material/soil seperately & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/unuseable material as directed with in all leads & lifts including restoration of un-metalled surfaces to its original condition & including cost of diversion for traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with-in all leads & lifts as per directions of the Engineer Incharge

Laying, jointing , testing & commissioning at site in trenches following plain ended GMS pipes of various dia Heavy/ Light grade as under confirming to BIS 1239-(Part-1)-1990 or latest with up to date ammendments, capable of withstanding required test pressure as prescribed in BIS code, in randum lengths of 5.5 to 6.5 mtr. The pipe's ends shall be bevelled suitable for butt weld, including the cost of jointing with butt welding confirming to IS 816-1969 or latest as applicable (leak proof) in three layers at site of work with welding rods of standard make & all allied accessories whatever required for welding at site, tail pieces, tees, bends manufactured from parent pipes etc. and cutting of pipes wherever required as per site requirement i/c carriage in all leads & lifts as directed by Engineer-Incharge (Earth work shall be measured & paid for seperately).

100mm dia (L)

80mm dia (L)

65mm dia (L)

Providing, welding and fixing M.S. plate flanges of various dia (nominal bore) of following Flange Tables confirming to IS 6392-1971 or latest with up to date ammendments to G.I. pipes after every 90 metre or as per site requirement including cutting of of pipes wherever required, welding in three layers (leak proof) confirming to specifications as prescribed in relvent I.S. Code i.e. IS 816-1969 or latest as applicable with up to date ammendments with nuts, bolts & washers & specials etc. confirming to IS-1963 or latest with up to date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorosive paints complete in all respect in all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. .

100mm dia, flange table -5

80mm dia, flange table -5

65mm dia, flange table -5

Laying , jointing testing and commissioning in trenches galvanised mild steel tube (light grade) including tube fitting such as bend, tee, reducer, socket and union etc . (earth work to be measured and paid for seperately) including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

50mm dia (L)

32mm dia (L)

25mm dia (L)

Providing and fixing brass full way valves with wheel of approved make and relevent ISS complete in all respects including of all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

100mm dia

80mm dia

50mm dia

32mm dia

25mm dia

SG Engineers and Consultants