Repairing & Renovation of I.T.I. Building At Meghraj Taluka : Meghraj District : Arvalli

Name of Work : Repairing & Renovation of I.T.I. Building At Meghraj

Taluka : Meghraj District : Arvalli

BILL OF QUANTITIES

Ite Description of Item

m (with brief specification and reference to book of Quantity Unit Amount

No. specifications)

1 Dismentling doors, windows, ventilators etc. (wood or 15.00 257.48 No

steel) shutters including chowkhats architraves,

holdfasts and otherattachment etc. complete and

stacking them within all lead andlift.(ii) Exceeding

2 Anti-Termite System:Providing and laying of permanent 7825.00 134.33 Cu.M

piping technology anti-termite treatment before flooring

work by installing LLDP (Low linear density polyethylene)

tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure

compensation chip every 30 cm interval in the tube,

having working pressure of 2 Kg/cm2 and release rate of

1.9 Itr/hour fixed by P-clips and nails. The LLDP pipe shall

be installed at the entire periphery of the building and at

internal network of building at a depth of 20 to 200 mm

under floor at every 2 to 3 mtr. c/c distance (adjusted as

per building layout ) & Ends of loop pass through a PVC

elbow of minimum 32 mm ID at junction box of wall and

floor level, entering into a steel reinforced grooved flexible

pipe of minimum 22 mm ID leading into junction box and

the loops shall terminate in junction boxes & test every

junction during injecting chemicals for termite control

treatment. The anti termite chemical Imidacloprid 30.5%

SC mix as per IS-6313 (part III) shall be injected by the

pressure pump diluted with water @ 10.5 ml/5 ltr of water

at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor

shall submit approved line plan for piping system and

junction boxes dully approved by Engineer-in-Charge with

bond of 5 year warranty.(i)Anti Termite chemical injected

area (Chemical injecting incl. labour cost)

3 Removing and scraping of old deteriorated plaster of 2496.00 19.92 Sqmt.

any thickness from wall/R.C.C member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift.

4 Providing 20 mm thick double coat mala cement 442.00 280.88 Sq.M

plaster on interior brick / concrete work for plastering

comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand)

in rough finishing and 8 mm thick top coat of cement

mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing, 10x10 mm

grooves etc. complete. for All Floors

Ite Description of Item

m (with brief specification and reference to book of Quantity Unit Amount

No. specifications)

5 Providing 10mm thick cement plaster (mala troweled 2055.00 164.63 Sq.M

finish) in single coat on Celling,& Soffits of Stair,

concrete wall for interior plastering finished even and

smooth in (ii) cement mortar 1:3 (1 Cement : 3 Sand)

6 Providing and fixing G.I. Rain water spout of 50mm 100.00 101.91 No

dia. and 30cm. Length for Sunk Slab or as directed

by Engineer in Charge etc complete.

7 Applying two coats of Birla or Asian (or equivalent) 2497.00 40.59 Sq.M

acrylic lapy ( putty) & two coats of primer of approved

brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth.

8 Wall painting (two coats) with plastic emulsion paint 2055.00 82.97 Sq.M

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

9 Providing and laying Anti skid Ceramic tiles 6mm 11.00 994.37 Sq.M

thick in flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white

cement,Pattren, Colour & Shade Approved by

Architect or Engineer in charge

10 Providing & fixing Door having 7.5 CM x 5 CM Teak 13.00 3092.62 Sq.M

wood frame with Double shutters of Teak Wood Top

& Style rail of Size 7.5 CM x 5 CM and With all proof

plywood 6mm & both Side Pre-Laminate 1mm thick

sheet with 30 cm long Stainless Steel pipe handle on

both side SS ASIS 304 Grade, Floor Spring each

side, SS Stopper 30 CM,SS Aldrop 30CM both side,

fixtures & fastenings as directed by Engineer in

Charge, etc. complete. For Door D

Ite Description of Item

m (with brief specification and reference to book of Quantity Unit Amount

No. specifications)

11 Providing and fixing Jindal Deluxe 27 mm series 28.00 2983.74 Sq.M

or eqivalent Three track Alluminium window with

Frame outer top , bottom and side member size

x 45 mm Jindal section no - 21401 , with sliding

shutters of single glass shutter top bottom & side

member size 65 x 28 mm Jindal section No -

& Inter lock member size 37 x 31.75 mm Jindal

section no - 19442 with 5 mm thick transparent

bronze colour tinted float glass for Shutter with Colou

Anodized aluminum Section, Fittings,

Fixtures,Rubber Gasket and transparent silicon

sealant glass fixing to frame as per drawing and

instruction of Engineer - in - charge etc.

complete.For W2

12 Providing, laying and jointing in true line and level 200.00 876.11 Rmt

110 diameter U.P.V.C SWR (Type B) Pipe

conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 110 mm

diameter x 149 mm length x 145 mm height at every

2000 mm centre to centre or shall be concealed in

walls as directed including necessary fittings such as

bends, "Y" "T" shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement

including cost of all materials.

13 Providing laying and jointing in true line and level 40.00 195.67 Rmt

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

14 Providing laying and jointing in true line and level 10.00 148.12 Rmt.

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

materials. 40mm dia

Ite Description of Item

m (with brief specification and reference to book of Quantity Unit Amount

No. specifications)

15 Providing laying and jointing in true line and level 60.00 91.84 Rmt.

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

materials. 25mm dia

16 Providing laying and jointing in true line and level 85.00 72.65 Rmt.

15mm dia.U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings asapproved by Engineer In Charge.

Pipe shall be fixed on the wallwith the help of clamp

at every two metre C/C or shall beconcealed as

directed including necessary fittings etc.

includingtesting of pipe and joints and fixing the same

with adhesivesolvent, including cost of all materials.

17 Providing and fixing wash down water closet 6.00 3675.39 No

(European W.C. Pan) with integral P or S trap and

PVC dual flush tank with complete fittings including

cutting holes in walls and making good the same

connecting the flush bend with cistern and closet etc.

complete including plastic seat cover and including

jointing trap with Waste pipe overall size as per the

selection of the Model by E.I.C. or as approved}

18 Providing and fixing urinal of approved quality 8.00 1142.77 No

including connecting urinal with waste pipe ,tap etc.

complete (A) white earthen ware flat back type size

430 mm x 260 mm x 350 mm including 32mm dia

C.P. brass waste Coupling with PVC Waste pipe and

PTMT Spreader with 15mm dia flexible pipe.

19 Providing and fixing Urinal of approved quality 8.00 1619.12 No

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

20 Providing and fixing screw down bib taps of following 70.00 186.83 No

size.(A) Brass screw down bib tap polished bright. (i)

Ite Description of Item

m (with brief specification and reference to book of Quantity Unit Amount

No. specifications)

21 Providing and fixing brass screw down stop tap.(A) 18.00 205.83 No

15mm dia. Jaquar, plumber, ess, or equiavalent

make as approved by Engineer In Charge.

22 Providing and fixing PVC SWR Nahni trap IS 14735 12.00 586.60 No

for drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

23 Providing and fixing S.W. Gully trap with C I grating 6.00 1246.92 No

brick masonry chamber and water tight C I cover with

frame of 300 x 300 mm size (inside) with standard

weight (i)square mouth traps (C) 150 mm x 100 mm

size P or R type

24 Providing and fixing C.P. brass towel rail complete 10.00 616.42 No

with C.P. Brass brackets fixed to wooden plugs with

C.P. Brass screws, (B) 600mm x 20 mm size

25 Providing and fixing in position PVC cowel went to 28.00 252.50 No

pipes.(B) 110mm dia.

26 Providing and fixing to wall, ceiling and floor 10.0 Kg 30.00 339.05 Rmt.

f/cm2 working pressure polyethylene pipes of the

following outside dia. Low density, complete with

special flange compression type fittings wall clamps

etc. including making good the wall, ceiling and floor.

Ite Description of Item

m (with brief specification and reference to book of Quantity Unit Amount

No. specifications)

27 Providing and fixing eco-friendly light weight calcium 936.00 1674.15 Sq.M

silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles shall

have , light reflection 85% non-combustible as per B.S.

part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation .

The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having NRC value

of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true

horizontal level suspended inter locking metal grid of hot

dipped galvanized steel sections (galvanizing @120 grams

per sqm including both side) consisting of main ‘T’ runner

suitably spaced at joints to get required length and size of

24X38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24X28mm

made out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main ‘T’ at 600mm centre to centre

to form agrid of 1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm

resting on periphery walls/partitions on a perimeter wall

angle pre-coated steel of size (24X24X3000mm made of

0.40mm thick (minimum) sheet with the help of rawl plugs

at 450mm centre to centre with 25mm long dry wall screws

@ 230mm interval and laying

Rupees ThirtyEight Lakh FourtyFive Thousand Nine Hundred EightyNine and Paisa SeventyEight

I / We am / are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rate mentioned above. Amount of my / our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct_________% Below Add_________% Above

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division