DEMOLITION AND RECONSTRUCTION OF PARADE GROUND, DAIS AT INS SATAVAHANA AND ADDITION AND ALTERATION IN SCULLERY AREA NEAR SAILORS DINING HALL BUILDING NO P-15 AT INS VIRBAHU UNDER GE (NB) VISAKHAPATNAM

Amount

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish to a distance n.exc 100m as directed by the Engr-in-Charge.

Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) and disposal of debris and rubbish to a distance upto outside MD land complete all as directed by the Engr-in-Charge

M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified and directed.

M & L for hardcore of gauge n.exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for moorum/red bajri filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified and directed.

M & L for Sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified and directed.

M & L for 100 mm thick, Cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in base of flooring/hard standing, etc, complete all as specified and directed.

S & F mild steel work, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed.

M & L for granite stone slab (of any type) 18 to 20 mm thick (Table rubbed and polished), machine cut, colour Mexican Red/Ruby Red/Z black/Paerl black etc design/pattern as directed including in lays, borders, margins in two or more colours/shades as in floors, trades of steps, cill cooking platform etc bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortor 1:6 & cutting, polishing complete all as specified and directed. (Note: Single stone slab shall be used for entire length/height of steps, jambs, pillars, window cills, cooking platform etc and joints sahll match with the flooring complete)

M & L for granite stone slab (of any type) 18 to 20 mm thick (Table rubbed and polished), machine cut, colour Mexican Red/Ruby Red/Z black/Paerl black etc design/pattern as directed including inlays, borders, margins in two or more colours/shades as in skirting/dado vertical surfaces etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick screed bed in cement mortor 1:4 & cutting, polishing complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces exc 50 mm and n.exc 100 mm deep and area n.exc 400 sqm complete all as specified and directed.

M & L for applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-30 @ 10 Kg per 10 Sqm complete all as specified and directed.

M & L for Premix bituminous macadam, with paving bitumen, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen of Grade VG-30 as binder, camber and gradient with 8 to 10 tonne power roller complete all as specified and directed. (Note: The rates are worked out on the basis of binder content of 4% by weight of total mix. No extra payment shall be made for any additional requirement binder content)

M & L for applying evenly a priming/tack coat with bituminous primer using paving bitumen@ 5 Kg per 10 Sqm complete all as specified and as directed.

M & L for bituminous premixed semi dense asphaltic concrete, 40 mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen of Grade VG-30, rolled and compacted, mixed in mechanical hot mixed plant and pre-mixed material laid by using mechanical paver, finished including rolling to required gradient and camber with 8 to 10 tonne power roller to required compaction complete all as specified and directed.

Material and labour for preparation of surface of road etc and applying 2.5mm thick road marking strips, lines, dashes, arrows, letters etc (reflective type) of colour white or golden yellow on road, pavements and the like exc 10cm wide with hot thermoplastic road marking paint by fully automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, drive by skilled operator on road surfaces complete as per MORTH specifications (Cluase No. 803.40) complete all as specified and as directed by the Engineer-in-Charge. (Note: Application shall be carried out through mechanical means by the approved applicator of the manufacturer of paint)

S & F in repair Solar cat eye, of size 125mmx125mmx25mm (shank 65mm) of high efficiency Waterproof, energy-saving and Eco-friendly made out of solid aluminum-alloy shell powered by solar cells and panels, Solar panel mono-crystalline solar 2.4 V / 0.3 Watt, One Ni-Mh or Ni-cd rechargeable battery [1.2V/1600MA] with six super bright LED with 10000 to 18000 mcd (Milicandela) with a minimum operating time of 3-4 consecutive days with full charge, viewing distance/visibility not less than 800m with 2 Hz Flash Rate, self operated from Dusk to Dawn, anti twist ribs on the bottom anchor/shank with high intensity reflective grade polymer sticker and confirming to IS-12063 of colour code yellow or red or blue or green or white as approved complete all as per manufacturer's instruction and as directed by the Engineer-in-Charge. (Make: Dark Eye DHRUV or equivalent model of make TATA BP Solar or 3M/Sinor)

S & F repair Road stud, two way reflective of size 100x110x20mm (approx), ABS body with retro reflective panel of Amber, Red or white colour complete all as per manufacturer's instruction and as directed by the Engineer-in-Charge. (Make: Dark Eye/TATA BP Solar or 3M/Sinor)

S & F in repair road side flexible delineator (reflector) as per approved model and confirming to IRC-67, made of highly flexible materials (should be restored back tp their erect posture even after being hit by a speeding vehicle without any damage), fitted with 100mm OMMA reflector, which emit excellent reflection during night time, overall height of the reflector shall be 1300mm with 3 reflective strips of colour Amber, Red or White as approved with 200mm dia base and 75mm dia pole fixed with nuts and bolts complete all as per the manufacturer's instructions complete all as specified and as directed by the Engineer-in-Charge. (Make: Dark Eye/TATA BP Solar or 3M/Sinor)

S & F Cuationary/Warning/Speed limit sign board,double sided having any shape of standard size, made out of 2mm thick aluminium sheet including frame made of MS angle with grey stove enamelled/powder coated, bonded with white retro reflective sheeting of Engineering Grade with watermark of the manufacturer's on the surfaces at regular intervals visible with naked eye assuring the quality of Engineering Grade having presure sensitive / heat activated adhesive, Engineering Grade retro reflective red coloured border, black coloured cut out symbols of non reflective sheeting having pressure sensitive adhesive including two mild steel angle iron post of size 65x65x6mm, 3.65m long, welded together to form box or tee, painted with two coats epoxy finish paint over a coat of epoxy primer having black and white bands of 25cm width including galvanised iron fixtures etc and fixing the board in and including PCC 1:3:6 type C-1 concrete block of size 60x60x75cm including necessary earth work and excavation complete all as specified and directed.

S & F road safety, convex mirror, 450mm dia complete with 50mm bore pole of height 1m above and fixture etc ground level fixed on ground with necessary PCC work including necessary excavation and earth work complete all as specified and as directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal of debris and rubbish to outside MD land complete all as specified and directed.

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar and removing rubbish upto a distance outside MD land complete all as directed by the Engr-in-Charge.

M & L for designer Chequered cement concrete tiles of size 20cm x 20cm x 23-25mm thick, as in floors etc, including 15 mm thick screed bed in cement mortar 1:6 and set & jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and directed.

M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed.

RAGHU RAMA PANDA

RAJASHEKHAR ENTERPRISES

venkata sai constructions

GVR CONSTRUCTIONS

P SRINIVASA RAO

SREE VIGNESWARA CONSTRUCTIONS