Construction of Indoor Stadium Cum Multipurpose Hall at Govt.Colleage Zanskar

Amount

Earth work in excavation by mechanical means (Hydraulic xcavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) inculding disposal of excavated earth, lead upto 50m and lift upto 1.50m,disposed earth to be levelled and neatly dressed: including back fillof trenchesOrdinay Rock

Ordinay Rock

All kind of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. including carriage compete Including Carriage complete job

Supply and laying of stone soling in horizontal with all leads and lifts i/c all carriages complete job

Providing and laying in position cement concrete of specified grade of 1:4:8 mix excluding cost of centering and shuttering all work upto plinth level i/c all carriages,leads and lifts. Mud mat Including Carriage complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Including Carriage complete job

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1.5:3 mix i/c all carriages, leads and lifts Including Carriage complete job

Reinforcement for RCC work including cutting, bending, placing position compelte i/c all carriages,leads and lifts.Thermo-Mechanically Treated bars of grade Fe-500D or more Including Carriage complete job

Cement concrete flooring 1:2:4(1 cement :2 coarse sand :4 graded stone aggreate ) finshed with a floating coat of neat cement including cement slurry and curing complete but excluding the cost of nosing of steps etc. complete 50mm thick with 20mm nominal size stone agg.Including Carriage complete job

Centering and shuttering including strutting, propping etc. and removal of form work forFoundations, footings, bases for columns Including Carriage complete job

Columns, piers, abutments, pillars, posts and struts

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms.

Dry random rubble masonry with hard stone in foundation and plinth with bond stone including lead and lift Including Carriage complete job

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick Including Carriage complete job

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer Including Carriage complete job

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Complete job. Truss Area = 11243 sft or 1044.88

P/F colour coated track deck of 0.50 mm thickness CGI roof sheetsincluding all nuts bolts and fixtures complete job.Including Carriage complete job

Providing ridges or hips of width 60cm overall width plain G. S. sheet fixed with poymer coated J. or L hooks, bolts and nuts 8mm G. I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275gm /m2 specifications as per engineer in charge Including Carriage complete job

Providing and fixing HPL Teak finish 8 mm thick , sizes 3660 mm x 1400mm x 8 mm. Rivet less cladding system as/per approval of engineer in chargeup to any height or as per drawing , wooden claddings ( Exterior ) with required sections clamps / strips ,providing base support( Complete Job as per specifications ) Including Carriage complete job

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) Sal wood Including Carriage complete job

Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class teak wood 35 mm thick shutter) Including Carriage complete job

Providing fixing paneling and glazing in panalled or panalled glazed shutters for door/windows 25mm to 40mm thick of 1st class kail wood.Including Carriage complete job

Providing and fixing factory made uPVC AIS or FENISTA or KOEMMERLING make white/wood Finish colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with <0.25 and >0.35 VLT may be introduced.)

Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).

Providing and fixing factory made uPVC of AIS or FENISTA or KOEMMERLING make white/Wood Finish colour fixed glazed windows/ventilators comprising ofuPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with <0.25 and >0.35 VLT may be introduced.

Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Including Carriage complete job

Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. Including Carriage complete job

Providing and fixing DGU ( with <0.25 SHGC and >0.35 VLT glazing in uPVC window, ventilator shutters and partitions etc. with proper sealing as per norms etc. complete as per the architectural drawings and the directions of engineerin- charge. ( Note : DGU with <0.25 SHGC and >0.35 VLT) Including Carriage complete job

TOUGHENED DGU glass panes of 5.0 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS / HNGIL make as approved by engineer in charge Qty vide window openings 80% Including Carriage complete job

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Powder coated aluminum (minimum thickness of powder coated 50 microns). Area to be covered = 3960 sft 5 kg per sqm Including Carriage complete job

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With toughened glass panes of 5.0 mm thickness (weight not less than 13.50 kg / sqm)

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. The rate includes providing and placing in position 2 nos. 6 mm dia M.S bars at every third course of masonry work.Including Carriage complete job

Providing and fixing of wooden panelling on walls upto height of 1 mtr including frame work, cornice and other items complete job as per specification.Including Carriage complete job

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in- charge and as per manufacturer’s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60

Providing and fixing 12 mm thick tongued and grooved pine wood (soft wood) 4.5 inch in width panelling or wall panels and ceiling including all necessary fixtures including cornice with necessary screws. Priming coat on exposed surface etc complete, including wood work in frames Including Carriage complete job

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade Including Carriage complete job

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut granite lappato finish ofrequired size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing toedges to give high gloss finish etc. complete at all levels Including Carriage complete job

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.

Providing and fixing thermal insulation of ceiling (under deck insulation) with specified glass wool conforming to IS: 8183, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60cm c/c and wire mesh of 12.5mm x 24g wire for top most ceiling of building. With resin bonded fiber glass wool with density 24 kg/cum Including Carriage complete job

Providing and fixing tiled False Ceiling of perforated metal tiles of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate INCLUDES the cost of metal tiles ).

Applying primingcoat with ready mixed ..pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) (Note it should have low or no VOC as per green building guidelines) Including Carriage complete job

Preparing newly primed wooden surface for pauinting by way of filling of putty sand papering rubble complete

Applying priming coat wih ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)it should be low or no VOC as per Green Building guidelines Including Carriage complete job

Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. Including Carriage complete job

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Including Carriage complete job

Supplying and fixing of FIBA Approved Pro competition mobile basket ball set with 20 mm acrylic board (KFTBB4 ) New State of the basketball mobile pole set. Complete job Including Carriage complete job

Supplying and fixing Hard Maplewood Flooring of 85mm system with Rubber pads, Pinewood Runners, Maplewood. Finished with multiple line marking for basketball and badminton. Whole System: Rubber Pad= 10mm Pinewood Runner= 50mm Maplewood Planks= 25mm Including Carriage complete job

Supplying and fixing Of ITTF Approved TT table dimension of table must as following: Width: 1.5 m Length: 2.7 m Height: 75 cm. Complete job Including Carriage complete job

Supplying and fixing of Snooker table of 4' X 8' table along with all accessoriesn Complete job

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Light shade using white cement, including all leads and lifts Including Carriage complete job

Supplying and fitting rubber tiles of interlocking pattern of adequate thickness for gynasium area compkete job

Supplying and fitting of indoor plastic stadium soft tip Up chairs complete job as per the direction of engineer incharge, complete job

Provision for providing and fixing ornamental Shingstak (Ladakhi wood carving over exterior Windows and main entrance door) (Design as per the direction of Engineer-In-charge.) including polishing all complete

MAIN DISTRIBUTION LT Panel. Supply, installation, testing and commissioning of M.V. cubicle type totally enclosed ,indoor type, free standing type, dust, damp and vermin proof Main Distribution Board complete with busbars, M.V. danger notice plate,Multifunction Meter indicating lamps, CT's, interconnections, with suitable capacity aluminium leads / solid aluminium strips / rods, connection of incoming and outgoing cables with thimbles, stove enamelled painted and having following incoming and outgoing MCCB & MCB's complete as required. 1 No320 Amp TPN MCCB release of 36kA with microprocessor based MCCB of 25kA with Rotary Handle, shunt trip coil, adjustable O/L, S/C, E/F release. 4 No. 160 Amp TPN MCCB release of 36kA with microprocessor based MCCB of 25kA with Rotary Handle, shunt trip coil, adjustable O/L, S/C, E/F release. 1 no 160 Amp Change over 4P 4 nos. 100 A TPN MCCB release of 36kA with microprocessor based MCCB of 25kA with Rotary Handle, shunt trip coil, adjustable O/L, S/C, E/F release. multifunctional meters with of CT's R,Y,B LED phase indicating lamp with MCB protection. suitable ratting BUSBARS for each segment space for additional MCB TPNs Note; The contractor will have to submit ISO certification and internal Drawings. The Contractor will have to submit test certificates i.e (HV test 1.5KV for 1 Minute , Megger Test) Manufacturers Test Certificate of Main Switchgears Panel should have minimum of 12 months of warrenty period certificate and free service

Providing, fixing, testing and Commissioning of DP 40 RCCB 100-300mA including Double door enclosure suitable for RCCB as per requirement

Supply of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, armoured, served, sheathed 1100 volts grade. 95 sqmm 3 1/2 core (DG supply)

150 sq mm 3 1/2 core (Main Supply)

Supplying and making end termination with brass compression glands of following sizes of 1.1. kv grade multicore aluminium conductor PVC insulated and PVC sheathed 3½ X 95 sq. mm

3½ X 150 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade Through existing HDPE pipes/ Cable tray or on surface of following size Above 35 sq. mm and upto 95 sq. Mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 150 mm dia

Supplying and fixing following way, Vertical type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) DB up to 160 A MCCB I/C & SP/TP MCB O/G , Vertical three phase distribution board with provision for 4 pole MCCB upto 160A as incomer with three phase and single with out MCCB's and MCB's 24noand max. ( at each floor 2no one for heating one for ligting) 4 way

Supplying, fixing, testing and commissioning of following Amperes of MCCBs with spreader links. 160 Amp 25KA 4 pole

Supplying, fixing, testing and commissioning of following Amperes of MCCBs with spreader links .100 Amp 25KA 4 pole

Supplying, fixing of MCCB MS door type Enclosure suitable for 125 - 160 Amp 4 P MCCB

Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, “C”-curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. single pole

Double pole

Supplying and fixing 0.5 A to 4 A rating, 240/415 V, “C”-curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. single pole

Supplying and fixing 40 - 63 A rating, 240/415 V, “C”-curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. Double pole

Supplying and fixing following rating, TPN, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required with Double door enclosure 40-63 A

Providing and fixing of 12 way Double door distribution Board (L/EDB)

Providing and fixing of 18 way Double door distribution Board (PDB)

Wiring for circuit (raw power)/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed in class heavy duty PVC conduit as required Note : Rates of Suitable PVC conduit included in above description for the follwing items 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 x 4 sq.mm + 1 x 4 sq.mm earth wire (UPS DB to sub EDB)

2 x 6 sq.mm + 1 x 6 sq.mm earth wire (LVTPN to LDB)

2 x 10 sq.mm + 1 x 10 sq.mm earth wire for Sub main wiring(PVTPN to PDB)

4 x 6 sq.mm + 2 x 6 sq.mm earth wire for Sub main wiring

4 x 10 sq.mm + 2 x 10 sq.mm earth wire for Sub main wiring (main panel to LVTPN)

4 x 16 sq.mm + 2 x 16 sq.mm earth wire for Sub main wiring (main panel to PVTPN )

Supplying and fixing of following sizes of Heavy class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Providing and fixing of Heating points using 4 sq.mmPVC insulated copper wire of FRLS through 1” 2mm heavy duty PVC conduit and providing and fixing of 6/16 Amp. of Modular Switch, socket recessed in wall covered with modular sheet/ MS box of required size including providing and fixing of 4mm² PVC insulated copper wire as earth wire, point taken up to D.B. duly tested and commissioned, complete point in all aspects note: all items included like Conduit, wire, MS box, switches etc.

Providing and fixing of Lighting point wiring with 1.5 mm2 PVC insulated copper wire of FRLS through heavy duty PVC conduit pipe with all necessary accessories including providing and fixing of ceiling rose with round junction plate 5Amp switches of recessed in wall using Modular switches, plate & MS box of required size, point taken upto D.B. duly tested and commissioned, etc. note: all items included like Conduit, MS junction box, wire, box, switches etc.

Providing and fixing of fan/ light point wiring with 1.5 sq. mm PVC insulated copper wire of FRLS through heavy duty PVC conduit with all necessary accessories including providing and fixing of ceiling rose with round junction plate 5Amp switches of recessed in wall using Modular plate & MS boxof required size, point taken upto D.B. duly tested and commissioned, etc. note: all items included like Conduit, Junction box, wire, box, switches etc.

Providing and fixing of UPS power point (in loop max 3 pts.) with 1.5 sq. mm PVC insulated copper wire , through PVC Conduit pipe with all necessary accessories i/c 6Amp switches, 5 Amp 3-pin socket 1 nos. recessed in wall covered with Modular Plates i/c Modular Box & MS boxof required size i/c 1.5 sq.mm PVC Insulated copper wire of FRLS as earth wire, Point taken up to DB duly tested and commissioned note: all items included like Conduit, wire, box, switches etc.

Providing/fixing of 4 ft LED slim 16 watt 110lm/w 230V Batten type lights(T5), complete in all respects. With 2kv surge protection. Industrial

Providing/fixing of 12 surface LED slim 230V , complete in all respects. With 2kv surge protection. industrial

Providing and fixing of 12”x12” Metalic type exhaust fan complete with all accessories includindg Frame etc .

Providing and fixing of 48 inches Sweep energy efficient ceiling fan of approved sample at site including wiring the down rods of standard length (30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc including Fan Junction MS box as required.

Providing and fixing of Fan dimmer electronic regulator Including MS box and Modular Plate 5Ampere 3 pin type.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections and modular plate etc. as required. 20/25 A switch

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 4 Module (125mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in heavy duty PVC conduit (conduit included) as required. 1 run of cable

Supply, installation, testing and commissioning of 24 port jack panel with connectors as per standard specification.

Supplying, fixing of following patch cord including connections, ferruling etc. as required. 1m Pre-Terminated Patch Cord

Supply, installation, testing & commissioning of following 19 inch rack for ethernet switches with 2 nos of A.C. distribution box, fan tray, lockable front tinted glass door and two pair angle to support the switch installed in the rack. 15 U rack

Supply and installation of flush mounted Enhanced Category 6 outlet. The plastic shall be high impact, flame-retardant, UL rate thermoplastic. Dust cover / blank shall be provided to protect unused faceplate openings. Termination caps and plastic cover shall be provided to protect jack wiring. D-link Single outlet faceplate with RJ-45 jack

Supply of advance maintenance free Chemical Gel Earthing of Dual Pipe Technology (GI) of 3 mtrs long 80 mm dia of outer shell (MS) with the 50 mm dia of inner shell (MS) of 80-100 microns galvanized CHEMRODE filled with highly conducting metallic compounds with the permenant sealings at both the ends with the lead terminal of 50x10mm size at the top. The electrode shall be duly tested and certified by CPRI (Central Power Research Institute), Govt of India for a peak short circuit withstanding capacity of 60 KA. including Supply/ fixing of environment friendly rust proof heavy duty weather proof polyplastic earth pit chamber.

Supplying and laying 25 mm x 5 mm G.I. strip at 0.50m. below ground level as strip earth electrode, including soldering etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required

sypplying of 1000 mm wide, 2000mm length, 1.1kV grade, antiskid rubber mat, As per IS 15652-2006 and of reputed make to be spread in front of the 415 V switchgear panels / DBs etc.

Providing and fixing of GI tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor as required.

Providing and fixing of lighning conductor finial, made of 25 mm dia. 300mm. Long GI tube, having single prone at top, with 85mm. Dia. 6mm thick GI base plate including holes etc. complete as required.

Providing, fixing and Cladding with 3 mm thick matt finish Aluminium composite panel with all fixing arrangements to cover the pipe line/ finishing etc.

S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board with supply of all material labour T & P etc for proper completion of work. (Approx front area = 1.20 sq M)

Providing and fixing of 4.5kg. capacity I.S.I. Marked. (IS : 15683) Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge.

PORTABLE FIRE EXTINGUISHERS 'Providing and fixing ABC stored pressure dry chemical powder (monoammonium phosphate) Fire Extinguisher IS : 13849 latest revision manufacturer and of CRCA sheet in welded construction, finish with epoxy polyster powder coated complete with brass forged ball valve, gun metal cap and nozzel, including initial filled and wall suspension bracket (suitable for fighting in class 'A', B & 'C' that is wood, textile, flammable liquid, electric and gases. 4 Kg. Capacity

Supply, installation, testing & commissioning of 6 kVA 1 phase in and 1 phase out UPS with isolation transformer in the input side of UPS. UPS comprising of Valve Regulated Lead Acid Sealed Maintenance Free batteries with minimum 60 minutes backup at full load with UPS. The bank of batteries shall comprise of required numbers of batteries connected in series. Battery banks shall be consist of battery rack, interconnection,Battery bank Protection Cover, DC Switch disconnector , AC Adaptor Box etc. complete as required including input/output leads/ Switch sockets etc. to make the system operational. Isolation transformer shall have seperate neutral.

FIRE alarm SYSTEM Supplying and fixing of following sizes of heavyduty class conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 2 core 1.5 sq. Mm

Supply, installation, testing and commissioning of multi loop adress upto 260 modules conventional Fire Alarm Control Panel complete with Display, with sufficient panel enclosure and cabinet size. The panel shall be able to give location of all fire/fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON /OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, Loop cards, L C D unit to indicate Fire/Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The panel shall have a built in power supply and battery charger along with maintenance free battriest SMF Lead acid batteries capable of running for a minimum of 8 hours with battery charger complete as required. Panel shall be able to sense & indicate fire or fault.

supplying and fixing of MS deep junction boxes in slab for detectors

Supply, installation, testing and commissioning of Multi Criteria Smoke cum Heat Detector, optical type with blinking LED and being capable of being addressed electronically. Manual Addressing (Dip/ Rotary Switches) not acceptable, with Mounting Base. Below false ceiling

Supply, installation, testing and commissioning ofDouble action manual pull station capable of being addressed electronically. Manual Addressing (Dip/ Rotary Switches) not acceptable, complete as required.

(NS) Supply, installation, testing and commissioning of Fire Alarm Hooter (sound output of minimum 90 dB upto a distance of 30 meters),made Addressable with the help of Intelligent Addressable Signal Module, capable of being addressed electronically. Manual Addressing (Dip/ Rotary Switches) not acceptable, with seperate power supply arrangement complete as required and suitable for wall/ceiling mounting.

Supply, installation, testing and commissioning of Fault isolator module complete as required for determining the short in a circuit and separating the segment having the short capable of being addressed electronically. Manual Addressing (Dip/ Rotary Switches) not acceptable, complete as required.

Supply, installation, testing and commissioning of Control Module complete as required for driving hooters, capable of being addressed electronically. Manual Addressing (Dip/ Rotary Switches) not acceptable.

Providing and fixing water closet squatting pan (Indian Orissa patern 580x440mm 100mm with P or S trap 10lit. Low level PVC flushing cistern

Providing and fixing white vitreous China water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever)conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required. pan with lSI marked white solid plastic seat and lid.

P/F low level PVC cistern

Providing and fixing white vitreous China wash Basin with C.I brackets, single hole basin mixer, 32mm CP brass waste of standard pattern , incl. painting of fittings and brackets, cutting and making good the walls where ever required. Wash basin 550x400mm with a pair of a5mm CP brass taps

P/F white vitreous China pedestal for wash basin complete ressed at back for the reception of pipe and fittings

P/F 600x450mm bevelled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground glass to wooden cleats with C.P brass screws and washers complete.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.

Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the

25mm OD(SDR-7.4)

32mm OD(SDR-7.4)

External work including trenching, refilling etc. Main supply line.

40mm OD (SDR-7.4)

a) PPR Union 25mm

b) PPR Union 32mm

c) PPR Union 40mm

d) PPR Holder 25/15mm

e) PPR Reducer 40/32mm

e) PPR Reducer 32/25mm

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

40 mm nominal bore

Providing and fixing ball valve PPR of approved quality complete

a) 15mm dia

b) 20mm dia

c) 25mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Tank(8X1000)

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.25mm nominal bore, 152mm long, weighing not less than 440gms.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 20.24.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line-

P/F master trap

Geyser's 35 Litre

Kent water purifier 50 Litre capacity per hour

Water lifting electic motor 2 Hoarse C&G, inl. Shelter, electric supply and board complete

P/F 600x120x5mm glass shelf with edges off. Supported on anodised angle frame with CP brass brackets and guard rail complete fixed with 40mm screws, rawl plugs etc.

P/F toilet paper holder (CP)

P/F soil, waste and vent pipes 1mm thick

a)PVC S&S pipe (150mm dia)

b)PVC S&S pipe (100mm dia)

c)PVC S&S pipe (75mm dia)

d)PVC S&S pipe (50mm dia)

PVC Cowell 50mm dia

P/F PVC stay and clamps for PVC pipes

P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes

P/F plain bends

P/F Tee-junction of required degree with access door, inserted rubber washer 3mm thick, bolts and nuts complete.100x100x100 PVC 1mm

P/F PVC Reducer 100-50mm dia

P/F PVC collar 100 & 75mm

Providing and fixing liquid PTMT soap container 109mm wide 125mm high and of approved quality weighing not less than 105 grms

P/F PTMT towel rails with brackets fixed to wooden cleats with CP brass with concealed fittings arrangement of approved quality (600mm long total length 645mm ,`78mm wide and effective hight 88mm weighing not less than 190gms

P/F CP gratting100mm dia

P/F PVC connections 15mm

Supply and fixing of design manafacture and commissioning and 05 years comprehensive waranty and maintenance of 500LPD Solar water heating system (tube collector based) at various site with technical specifications complete job.

Supplying and fitting of 40 W flood light, the luminary should have at least IP65 ingress protection rating

FEROZ ENGINEERING WORKS