ADDITION / ALTERATION TO HELIPAD LOCATED AT

Amount

Demolition of brick work or stone masonary built in cement mortar including quoins, arches, pillars etc., and precast concrete articles and disposing off the rubbish materials outside MD land all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid dry etc complete all as specfied and directed.

Demolition of Stone pitching laid dry and pointed of any description of thickness and disposing off the rubbish materials outside MD land complete all as specfied and as directed.

Demolition of Cement concrete of any description and in any position complete and disposing off the rubbish materials outside MD land all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for complete all as specfied and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.

Taking down chowkhats or frame of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frame of any description with shutters (without taking off shutter from the frames) exc 1.5 sqm but n exe 4 sqm each all as specified and directed.

Dismantling floor, hearth or wall tiling or sone slabs of any description including cement mortar bedding (but not backing) and rubbish off the premises.

Excavation in trenches, n. exc 1.5 m wide and n.exc 1.5 m in depth for laying of pipes and getting out in soft/ loose soil complete all as specified and as directed by Engr-in-Charge. Qty for B/R portion - 27 CUM and E/M potion -05 CUM

Returning, filling of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed by the Engr-in-Charge. Qty for B/R portion - 05 CUM and E/M potion -03 CUM

Removal of excavated material at a distance not exc 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point in soft/loose soil complete all as specified Qty for B/R portion - 14 CUM and E/M potion -02 CUM

M&L Spreading and levelling of soil in layers n exc. 25 cm thick including watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed by the Engr-in-Charge.

M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L Treating the bottom and sides of excavation at the rate of 5 litres emulsion of Chlorophyriphos 20 EC per square metre of surface area

M&L Treating the backfill in contact with foundation at the rate of 7.5 litres emulsion of Chlorophyriphos 20 EC per square metre of vertical surface (Area of the substructure in contact with backfill to be measured)

M&L Treating the top surface of filled earth at the rate of 5 litres emulsion of Chlorophyriphos 20 EC per square metre of surface

M&L Treating the soil under plinth protection at the rate of 5 litres emulsion of Chlorophyriphos 20 EC per square metre of surface area

M&L Treating the soil along with external perimeter of building at the rate of 2.25 litre emulsion of Chlorophyriphos 20 EC per metre of the perimeter wall

M & L Cement concrete 1:2:4 (using 20 mm graded stone aggrigate as in filling mass concrete complete all as specfied and as directed.

M&L RCC Sesign Mix (M-25 ) as in columns, beams, footing and slab etc complete all as specfied and as directed

M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed by the Engr-in-Charge.

M&L PCC ( 1:2:4) type B1 as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed by Engr-in-Charge.

M&L PCC (1:2:4) B0 using 12.5 mm graded stone aggregate as in levelling/padding concrete over RCC roof surface including rounded or chamferred on edges etc., with 2% approved water proofing compound on the roof surface to achieve requisite slope all as specified and directed. (Note :- Supply only water proofing compound shall be measured & paid separately).

M&L Pre cast reinforced cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) cover slabs and shelves and the like complete all as spcefied and directed.

M&L Cutting channels, grooves etc in existing wall exc 15cm girth but n.exc 30cm and trimming surface and make the surface good with existing specification.

Supply only integral water proofing compound

M&L Brick work with fly ash brick straight or curved on plans exe 6m means radious built in CM (1:6) completed as specified and directed.

M&L Brickwork with fly ash brick, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) .

M& L Boulder pitching laid dry and grouted with cement and sand mortar 1:6, hand packed tightly complete all as specfied and directed.

Labour only Boulder pitching laid dry and grouted with cement and sand mortar 1:6, hand packed tightly complete all as specfied and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) complete all as specified

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified

M&L MS angles as in posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets including all necessary drilling, bolting or riveting into RCC slabs and etc , and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specfied

M&L Mild steel flat iron for conforming to Fe 290 Gde E-165 in post, strut and bracing including fabrication i.e. cutting tops drilling holes notching for wire welding etc..complete all as specified

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 15cm but not.exc 22.5 cm long,diameter of neck n exc12 mm complete all as specified and directed.

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L TMT steel bars 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups complete all as specfied and as directed

S&F Powdered coated anodised aluminium frame for window, ventilator with one or more rebates with minimun powder coating of 50 micron incl jointing cleat for fixing complete all as specified.

M&L 100 mm thick PCC Type C-2, 1:3:6 (40mm graded aggregate) with construction joints of 10 mm thick bitumen filler complete all as specfied and directed

M&L 75mm thick PCC(1:3:6) type C1 (using 20 mm graded stone aggregate) finished the surface even and smooth without using extra cement complete all as specified

M&L Glazed ceramic wall tiles (600 x 300 x 6 to 7 mm thick) set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering with CM (1:4) complete all as specified

M&L Coloured non skid ceramic floor tiles (300x300x 6 to 7 mm thick) set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed with CM (1:6) complete all as specified

M&L Vitrified tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed with CM (1:6) complete all as specified

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment, glossy finish of any shape and size conforming to IS:15658-2006 of 60 mm thickness, M35 grade complete all as specified.

M&L Rendering 15mm thick in (1:6) CM on fair faces of brick work or concrete surfaces of walls.

M&L Rendering 5mm thick in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement

M&L Rendering 15mm thick with cement mortar 1:4 on of brick work or concrete surfaces finished even and smooth without using extra cement including waterproofing compound @3% by weight of cement including necessary scaffoldings complete all as specified and as directed by Engr-in-Charge. Note :- Water proofing compound shall be measured and paid under supply only rate separately.

M&L Applying white cement based wall care putty on wall, new or old surfaces of any description finished even and smooth complete all as specified and directed.

M&L Raking out joints/pointing set in CM to Stone paving etc complete all as specfied

M&L Raised pointing in cement mortar 1 :3 as in Stone pavings etc complete all as specfied and as directed by Engr-in- Charge

M&L Two coats of oil bound distemper on newly putty wall surfaces over a coat of primer including necessary scaffoldings etc complete all as specified

M&L Preparation of new surfaces of ceiling and application of three coats of white washing complete as specified and directed.

M&L Preparation of cement based /concrete surfaces of any description and applying two coats synthetic enamel paint over one coat primer of approved colour and make as in marking complete all as specfied and directed by Engr-in- Charge,

M&L Preparation of new steel surfaces and application of two coats of synthetic enamel paint over one coat of red oxide, zinc crome primer, complete as specified and directed.

S&F 15 mm bore galvanised steel water tubing medium grade including all fittings and fixed to walls/ ceiing or laid in floors and including taking down steel tubing and connections complete all as specfied

S&F 25 mm bore galvanised steel water tubing medium grade including all fittings and fixed to walls/ ceiing or laid in floors and including taking down steel tubing and connections complete all as specfied

S&F 40mm bore high density polythene pipes (HDPE) of pressure rating 6 Kg / cm2 fixed complete to walls, ceiling or in floors etc.

S&F 15 mm bore fancy type bib tap cast copper alloy chromium plated screwed down for irin pipe complete all as specfied and directed by Engr-In -Charge .

S&F Angle cock 15mm cast copper alloy CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specfied

S&F 25 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specfied

Supply only PVC connector 15mm size with PTMT nuts of length 450mm

S&F 110mm bore PVC pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with 40mm MS clamps fixed with 8mm dia bolt with two nuts complete all as specifed

S&F Sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm

S&F 75mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches.

S&F 75 mm bore CI bends,diminishing pieces or tapers with oval access door

S&F 110mm dia PVC (SWR) bend completed as specified and directed.

S&F CI Nahani trap 75mm dia outlet with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) and including old trap.

M&L Preparation of new plastered surface of walls ,chajjas and applying two coats of white cement based wall care putty and applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer including necessary scaffoldings complete all as specified and as directed.

S&F Vitreous China white counter sunk wash hand basin, fancy type ,ovel shapped size 550mm x 400mm including necessary fitting complete as in repairs all as specified and directed.

S&F Wall mounted EWC with flushing cistern China white of Model No. Hindware Cornice 92055 ceramic wall hung or equivalent ,including necessary fitting complete all as specified

S&F Health fauset including all necessary fitting complete as in repairs all as specified and directed.

S&F 40mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing union and cap and fixed.

S&F 15mm bore pillar tap fancy type copper alloy, with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and flynuts, screwed for iron pipe and fixed.

S&F Shower rose cast copper alloy chromium plated fancy type screwed down for iron pipe complete all as specfied

S&F 3 mm thick 3 layers heat insulating UPVC sheet as in walls and roof covering including fixing to to angle iron section with screws complete all as secfied and as directed by Engr-in-Charge

S&F 10 mm thick toughened glass as in doors and window complete fixed with aluminum beading with rubber gasket complete all as specfied and directed,

S&F Floor door spring heavy duty complete as in repairs all as specfied and directed

S&F 300 mm long fancy type CP door handle completeas in repairs all as specfied and directed.

S&F 150 mm long fancy type CP lock for glass door complete as in repairs all as specfied and directed.

M & L Cement concrete M-30 Design Mix using 20 mm graded stone aggregateas in mass concrete and including necessary hacking/roughning on exisiting surface and finished the surface by brooming without using extra cement complete all as specfied and as directed. Note:- Design Mix report will be submitted by contractor before incorpration of work for approval of GE without any extra cost to Govt

M&L Constrution /dummy joints 30 mm deep x 10mm wide, filled with garde B sealing compound using diamond cutter in a stright line complete all as specfied and directed by Engr-in- Charge

M&L Forming expansion joints 20 mm wide(using diamond cutter) with pre-formed bituminous filler board and top 30mm primed and sealed with sealing compound grade B, compressible syntheitc filler board H 100 all as secified and as directed by Engineer-in-Charge.

S&F Desk with provsion of cabins / drawers for housing LUP sets and other control equpments made up of 3 mm thick UPVC 3 layer fire proof boarding with complete fittings complete all as specfied and dircted by Engr-in -Charge.

Supply Chair revolving FD-75(M) complete all as specfied and directed.

M&L Point wiring with 1.5 Sqmm FRLS PVC insulated and usheathed multi stranded flexible copper conductor cable in and including rigid PVC conduit concealed /PVC surface conduit with sunk cast iron/pressed steel terminal boxes of adequate size with 3mm thickness plastic laminated sheet, cover of adequate size including 1.5 Sqmm FRLS PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire (green colour)connected to common earth dolly complete all as specified and directed by Engineer-in-Charge for following Note: - (a) Unit rate quoted includes for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed.

(a) One light point controlled by one switch complete

(b) One fan point controlled by one switch complete

(c) One 3 pin socket out let 5 Amps on the independent board.

(d) one 3 Pin socket out let 5 Amps on the same board.

All as per serial item No.89.00 here in before but with cable of size 2.5 Sq mm PVC insulated on independent board for power plug 15 Amps complete all as specified

S & F S&F Switch Socket 5A-2/3 pin combined 3 Module box type including Switch and Sockets, sunken box and all accessories to be fixed in wall complete all as specified

S & F S&F Switch Socket 15A-2/3 pin combined 3 Module box type including Switch and Sockets, sunken box and all accessories to be fixed in wall complete all as specified

S&F Switch modular type 230 volts , 5 Amps, single phase complete all as specified

S&F Switch socket board 8 way with cover plate complete all as specified

S & F Stepped type electronic fan regulator modular type 230V, 50Hz SP complete all as specified

S&F Ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified

S&F Wall mounted fan 400mm sweep with blade and connecting up to including provision of flexible three core copper conductor cable 23/0.0076 from ceiling rose to connector block complete all as specified

S&F Ceiling fan 1200 mm sweep complete with blade, canopy and down rod and connecting up to and including provision of flexible three core copper conductor cable 23/0.0076 from ceiling rose to connector block complete all as specified

S & F LED light fittings 1x22W, 230 Volt, wall mounted LED batten & LED Rod separate, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, LED rod complete with all accessories internallly prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and within built air ioniser and Plasma filterfor better indoor air quality with minimum BEE 5 star rating of capacity 2.0 TR.Copper condenser,eco friendly refrigerant ,AC (outdoor & indoor unit)suitable for wall mounted with and including MS powder coated brackets and making/breaking hole through the wall for and passing the suction/discharge line including excess copper tubing if required beyond the length supplied with AC unit but not more than 5.00m and PVC conduit of 15mm dia not exceeding 2.5 m. long in concealed surface of wall for drainage of water, making good to disturbed surfaces with cement mortar 1:3 complete all as directed. Note :- Rate for MS powder coated stand and extra copper pipe required shall be deemed to be include in quoted rates.

S&F Voltage stabilizer for automatic operation single phase naturally air cooled designed for input voltage variation 170 to 280V output voltage stabilized 230V with accuracy of ± 2.5% and of capacity 3KVA complete all as specified

S&F MCB’ TPN, 16 Amps, 415 volts with ‘C’ curve, in the existing PVC box including connecting complete all as specified

S & F MCB SPN, 10 Amps, 415 volts with ‘C’ curve,in the existing PVC box including connecting complete all as specified

S&F MCCB 4P, 40 Amps, 25 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete.

S & F Sheet metal enclosure for MCB DB TPN 4 Way double door complete all as specified

S&F Socket modular type with suitable frame 2 in 1, 3pin, 6 amps 2 module complete all as specified

M & L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried in ground (earth pit not less than 2.25 Mtr deep below normal ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level, connecting to the Galvanised iron earth lead 32 x 6 mm size by means of bolts, nuts check nuts and washers of galvanised iron and 32 x 6 mm dearth lead protection by provision of GI medium grade pipe 40 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20mm graded stone aggregate with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4gs/Sqm) and frame of angle iron 25mm x 25mm x 6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm x 8 mm FI with fixing arrangements, funnel, wire mesh and earth work in hard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 Mtrs all as per electrical Plate No.3 of SSR Part I and connecting to earth test point all as specified or indicated including testing on completion

Supply, laying, testing and commissioning of 4 core of 10 Sqmm 1100 Volts grade(Earthed) XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminum conductor laid in trench/under ground/wall/surafce/tunnel/duct complete all as specified

M & L Dry Sand cushioning to underground cable with screened, washed river sand, including punning gently all as specified and directed. Note: - Thickness after punning will be measured for payment

Supply and lay burnt brick sub class `B' old size in trenches abutting each other width equal to length of brick etc complete all as specified

S&F 25mm bore GI tubing light grade with all fittings fixed on wall and ceiling or laid in floor as in r protection of cable complete all as specified

divyarsh entrprise

DMA PROJECTS