REPAIRS/REPLACEMENT OF FLOOR, PLASTER, SUNKEN FLOOR FOR TOILET / BATHROOM, KITCHEN, PLUMBING, SANITARY, REPAIR / REPLACEMENT OF JOINERY, AC SHEET, FALSE CEILING ETC IN ZONE-IV, UNDER AGE B/R-II AT GE (WEST) BAREILLY.

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed

Brick work with fly ash bricks, straight or curved on plan 6m mean radious built in CM (1:6) etc as directed .

Dismantling water tanks exc 250 & n exc 500 ltr removing to store

Dismantling water tanks exc 500 & n exc 1000 ltr removing to store

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs including dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified in SSR Part I and directed

Demolition of cement concrete (un-reinforced) including terrazo of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Removal of existing treatment and wire brushing and cleaning top surface of tiles and roofs to preparation of surface for applying in primer and bitumen.

M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course with to be finished even and fair without using extra cement on roof surface / chajja (thickness of concrete will be provided as per site requirement and as directed by engr-in-charge) complete all as specified and directed.

M&L for 15mm thick screeding on fair faces of concrete surfaces in CM 1:4 with water proofing compound @ 200ml per 50 Kg of cement complete all as specified and directed.(NOTE:- WPC shall be measured and paid separatly), finished even and smooth with steel trowel without using extra cement.

Supply only liquid water proofing compound (Make :Dr fixit)

Supply & providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacturer's specification complete all as specified and directed. (b) Supply & providing water proofing treatment with polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100micron HMHDPE film centre core including coating the surface with the bitumen 85/25 @ 1.20 Kg/Sqm and torch application of membrane with 10cm overlaps and longitudinal edges 15 cm at the ends as required thereof, complete all as specified & directed.

M&L Aluminium paint one coat on APP membrane complete all as specified and directed.

M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating, incl demo of old concrte complete all as specified and directed.

Dismantling floor, hearth or wall tiling/terrazo including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes all as specified.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes all as specified.

M & L for non-skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes all as specified.

M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed

M&L for glazed coloured ceramic tiles 300 x 200mm x 7mm thick in vertical wall surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles complete all as specified and directed.

M&L for Glazed (plain /coloured) ceramic tiles wall 450x300x7mm thick on vertical faces of walls including 10mm thick rendeing in CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match including taking down old dado/skirting complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc complete all as specified and directed

Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S & F GI wire mesh 0.48 mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed

Taking down cement or cement lime plaster any description on brick walls etc. including racking out joints hacking for keys scrubbing down with water.

M&L rendering 10mm thick in CM 1:6 on brick or concrete surfaces and finished even and smooth w/o using extra cement including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:4) including finishing the surface even and fair and including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed.

M & L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar (1:3) newly surface even and smooth without using extra cement and necessary scaffolding all as spd and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

M&L preparation of newly plastered surfaces and applying two coats of cement base paint on walls all as specified & directed by Engr-in-Charge.

M&L white washing three coats on ceiling surfaces including preparation of newly plastered untreated surfaces and necessary scaffolding all as spd and directed

S&F 15mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

M&L for screed bed or bedding layer of cement mortar 15mm thick in CM (1:6) for laying floor finishes complete all as specified and directed

M&L for 40 mm thick cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) finishing sufaces even and smooth without using extra cement complete all as specified and directed

M& L for providing precast cement concrete rubber moulded chequered coloured tiles 20 to 25 mm thick even finished on top of approved design and pattern complete all as specified and directed

M& L for providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion including filling the joint with sand complete all as specified and directed

Dismantling of asbestos cement (corrugated, semicorrugated, etc)/pre painted sheets in roof coverings

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

M&L for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts

Ditto but fixing only.

S&Fin repair 6mm thick asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J- Type or cranked hooks bolts all as spd and directed

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified ®

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets.

M&L for 4mm thick E-Board classic (everest or equivalent) tiles for insulation and accoustic purpose 60cm x 60cm with and including powder coated galvanised iron snap grid with 32x25x1.5mm thick Tee section and 32x25x1.5mm thick algle section with all hanging/supporting arrangements as in false ceiling and making good disturbed surface complete all as specified and directed.complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed

S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed

S&F in repairs vitreous china Orissa pattern IWC size 580x440mm white with integral foot rest complete including trap.

S & F in repairs PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia complete all as specified and directed.

S & F for PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia complete all as specified and directed.

S&F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed

S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.

S&F in repairs chromium plated fancy type stop vlave /angle valves with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.

S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.

S&F in repairs 100 mm dia shower rose of Chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed.

S&F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.

S&F in repairs PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed.

S&F for 15mm dia Pillar taps of PTMT fancy type any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms) complete all as specified. Make : Prayaag, pearls, poly fusion, Polytuff,

S&F for 15mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). Make : Prayaag, Pearls, Poly fusion, Polytuff,

S&F in repairs for PVC waste pipe of 30 mm dia for kitchen sink/WHB etc complete all as specified.

S&F in repairs for PVC waste pipe flexible of 30 mm dia for kitchen sink/WHB etc complete all as specified.

Demolition/Dismantling of breaking up drain pipes( AC or reinforced concrete )set in cement mortar for 110mm dia (and less) of pipes.

S&F PVC (SWR) pipes 110mm dia, single socketed in any length fixed to walls & floor ,jointed with solvent cement.

All as above but 75mm dia pipe

Cutting holes into bricks walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1as required, depth of hold fast exceeding half brick and not exceeding one brick all as spd and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm incl removing from the premises complete all as spd and directed

S & F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per spacification and drawing all as spd and directed

S & F factory made solid pannel PVC door shutter 30mm thick style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm wide struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gap insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per spacification and drawingshown in SSR Pt -ll (rate ) - 2010.

Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each incl removing from the premises complete all as spd and directed

S&F factory made 30mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood shutter for door glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for window/ventilators divided into squares with plain chamfered mitred & rebated sash bars edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc sizes of member as spd in SSR Part I sec 8 clause 8.24 (b) all as spd and directed

S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as spd and directed

S&f in repair floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring, 140mm long complete all as spd and directed.

S&F in repairs cast iron body door closer hydrocally regulated designation No. 1 universal type for door shutters up to 700 mm in width and of weight not more than 35Kg and fixed all as spd and directed

S&F 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F 100mm long stainless steel but hinges for PVC door

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handle fabricated type anodised complete all as specified and directed.

S&F in repair 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description and applying two coat of synthetic enamel paintover one coat of pink primer complete all as spd and directed by Engr-in-Charge

M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface all as spd and directed

REHAN CONSTRUCTION

M/S Shree Sai Builders

MOHINDER SINGH AND SONS

SURYA CONSTRUCTION

M/S YASHCON CONSTRUCTIONS