Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹37.1 L+₹2.7 L (7.92%)Rejected-Finance | L2 | Rejected-Finance Become L2 | |
| 3 | L3₹37.3 L+₹3.0 L (8.64%)Rejected-Finance | L3 | Rejected-Finance Become L3 | |
| 4 | L4₹38.3 L+₹3.9 L (11.3%)Rejected-Finance 2ND FLOOR SC ROAD SANTA PLAZA TEZPUR DISTT SONITPUR ASSAM PIN 784001 | SONITPUR | ASSAM | 784001 | L4 | Rejected-Finance Become L4 | |
| 5 | L5₹41.3 L+₹7.0 L (20.2%)Rejected-Finance | L5 | Rejected-Finance Become L5 |
Tender Value
Refer Docs
EMD Value
₹77,800
Closing Date
12 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Tezpur
GE South Tezpur Mission Charali Tezpur, Assam
SPL REPAIR TO BLDG NO T-30 AT 56 FMSD AND PROVN OF CERTAIN SANCTIONED WORKS AT SAA (PHASE-24) UNDER GE (S) TEZPUR
2022_MES_563274_1
8712
Open Tender
Civil Works
Item Rate
210 days
GE South Tezpur
As per NIT
4 documents required · 4 mandatory
₹500
Yes
GE South Tezpur
₹77,800
Yes
1 Feb 2023
15 Nov 2022
14 Dec 2022
15 Nov 2022
12 Dec 2022
29 Nov 2022
Amount
Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering, complete all as specified and as directed.
S&F 0.5mm thick pre-painted galvalume aluminium zinc coating GI based trapezoidal steel sheet of any colour ,tensile strength of 550Mpa as in roof covering ,cladding to wall ,ridge,gutter etc fixed with self tapping screws, complete all as specified and as directed.
All as per item No.3 above but plain sheet for ridge ,gutter etc fixed with self tapping screws Complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets Complete all as specified and as directed.
S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel truss any type of tress, complete all as specified and as directed.
S& F in repairs of 4mm thick E Board decorative type in false in any type of frame work all as sepcified and drected
S&F of pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work thickness of 12 mm complete all as specified and directed.
Material & Labour 19/20 mm thick Block boards, grade 2 quality, interior grade, laminated sheet with decorative face, veneer on one face, commercial type fixed with screws to timber frame work complete all as specified and directed.
S & F Continuous (piano) hinges, 30 mm width of flaps ,mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as specified and as directed
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as directed
Dismanting timber scantling 40 Sqcm and over in secion in any position in unframed work, complete all as specified and as directed.
M&L 2nd class HW in scantling fixed clean swan in unframed work, complete all as specified and as directed.
All as per Ser Item no 13 above but In fillets, rails , posts, rafters and purlins etc under 40 sqcm in section unframed work, complete all as specified and as directed.
M&L 2nd CL HW plain fillets square, rectangular in section clean sawnn sectional area exe 13 sqcm & n.exe 25 sqcm fixed with nails including one coat of black oil, complete all as specified and as directed.
Dismanting timber boarding of any description fixed in any position, complete all as specified and as directed.
M&L second class hardwood Weather boarding, 20mm thick, wrought both sides and edges shot and chamfered, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) complete and removing rubbish off the premises complete all as specified and directed.
M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6, complete all as specified and as directed.
S&F Coloured Glazed ceramic tiles 450 x 300 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm screeding in Cement mortar 1:4. Complete all as specified and as directed.
M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6, complete all as specified and as directed.
All as per item No 21 above but in skirting over 10mm thick screeding in cement mortar 1:4, complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing Complete all as specified and as directed.
M&L for treating the kota stone surface with beeswax polishing Complete all as specified and as directed.
M&L for Paved tiles of size 300 x 300 x 22 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.
M&L for Chequered cement concrete tiles of size 300 x 300 x 20 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.
M/L Granite (of any type) tiles 18-20 mm thick machine cut (table rubbed and polished), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 over cooking platform including grinding the edges half round and polishing including etc complete all as specified and directed.
M&L 18-20 mm thick Granite (of any type) tiles machine cut (table rubbed and polished), in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick screed bed in CM 1:4 including grinding the edges half round and polishing including etc complete all as specified and directed.
Dismantling Structural steel work includings door, gates, etc and similar works complete all as directed
Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.
Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and as directed.
Taking down chowkats or frames not exc 1.5 sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and as directed.
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.
Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately), complete all as specified and as directed.
Supply and fix, second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints all as specified and directed.
S&F Solid PVC frame of size 50mm x 47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc complete all as specified and as directed
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails,M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail& bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading , and joined together with solvent cement,supply and fixing at site as per specifications, complete all as specified and as directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.
S&F Anodised aluminium frame (three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Complete all as specified and as directed.
S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,4mm plain glass and stainless steel wirmesh 0.36mm nominal dia of wire and average width of aperture 1.40mm etc, complete all as specified.
S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles exe. 200cu.cm and n.exe 200 cu.cm each, complete all as specified and as directed.
S&F Butt hinges medium weight cold rolled mild street and fixed size of hinges 50mm, complete all as specified and as directed.
S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised, complete all as specified and as directed.
S&F 75mm size type C-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised, complete all as specified and as directed.
S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long, complete all as specified and as directed.
S&F extruded aluminium alloy handels fabricated type, anodised, 100mm long, complete all as specified and as directed.
S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy, complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws, complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws, complete all as specified and as directed.
S&F MS 300mm ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified and as directed.
Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.
Demolition of reed lathing, single or double including battens and plasters or checken wire lathing, complete all as specified and as directed.
Material and labour for burnt modular brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar ( 1:6), complete all as specified and as directed.
Material and labour for burnt modular brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar ( 1:6) all as specified and directed.
Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.
Taking down plastering on lathing (including wire-netting), without removing lathing, in cement mortar, complete all as specified and as directed.
M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 3% by weight of cement and finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC will be measured and paid for separately)
Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair, complete all as specified and as directed.
Supply only water proofing compound. Conforming to IS -2645, complete all as specified and as directed.
M&L Applying two coats of Oil bound distemper by smart painting method to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.
M&L preparation of newely plaseter surfaces and appplying two coats of weather coat(Apex) over two primer coats of damp shealth to new plastered of walls by smart painting method as per manufacturer and apllied by approved applicator complete all as specified and directed.
M&L complete removal of existing treatment and appplying two coats of weather coat(Apex) over two primer coats of damp shealth to old plastered of walls by smart painting method as per manufacturer instrcution including properly fillings the cracks and apllied by approved applicator complete all as specified and directed.
M&L Applying two coats of Oil bound distemper to wall over a coat of 1 mm layer wall care putty over a coat of primer by smart painting method including complete removal of existing treatment all as specefied and directed.
M&L for applying for preparation of old painted surfaces of wood and woodbase surfaces of any description , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specefied and directed.
M&L preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for applying for preparation of old painted surfaces of wood and wood base surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint all as specefied and directed.
M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint all as specefied and directed.
S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,
All as per item No 71 here in before but 20 mm bore.
Supply and fix, vitreous china wash down water closet pan (Pedestal pattern) 'P' or 'S' trap, white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed
Supply and fix,10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.
Supply and fix, as in repair bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement all as specified
Supply and fix, as in repair, vitreous china wash basin, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
Supply and fix, as in repair, stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.
Supply and fix,as in repair,15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.
Supply and fix, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
S&F swivel shower of brass chromium plated with long head for fixing with 15 mm pipe all as specified and directed.
Supply and fix,as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.
Supply and fix,as in repair, waste coupling CP 32/40 mm dia for glazed wash basins etc with fly nuts flanged etc complete all as specified and directed.
Supply and fix, as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.
S&F kitchen plate rack made out of stainless steel 0.63 mm thick sheet with partitions and size of rack 800 x 250 x 900 mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed. Nirali /Anjali/Prayag/Bluestar
Supply and fix sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed.Make - Nirali /Anjali/Prayag.
Supply & fix curtain harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. with two Nos of socket ,end caps and brakets (decorative type) complete for doors/window opening all as specified and directed
S&F brass choromium plated towel rail 600 mm long complete all as specified and directed.
Supply and fix sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed.
Supply and fix, Hand Shower (Health Faucet) (Brass chromium plated) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed.
S&F 20mm Ball PTMT valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed.
S&F 15 mm Ball PTMT valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed.
S&F PVC (SWR) floor trap ,plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.
Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed.
Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed.
S&F PVC (SWR) 110mm dia bends any radius all as specified and directed.
S&F PVC (SWR) 75 mm dia bends any radius all as specified and directed.
Supply and fix, PVC cowls 110 mm bore all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in loose/soft soil.
Returning , filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick, complete all as specified and as directed.
Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as directed.
M & L for PCC 1:4:8 type D2 using 40 mm graded aggregate as in foundation filling and mass concrete, complete all as specified and as directed.
M&L for Hardcore of broken bricks of guage n exe. 63mm deposited spread and levelled in layers n exe 15 CM thick watered and rammed to a true surface, complete all as specified and as directed.
M&L for Sand Filling under floors or in foundations or in trenches including watering and consolidation as directed by Engr -in-Chrage.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed.
Material and labour for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded aggregate as in bed block or hold fast all as specified and directed.
M&L 75 mm thick PCC 1: 3:6 type C2 using 40mm graded agg as in path/base complete all as specifed and as directed.
M&L 75 mm thick PCC 1: 3:6 type C2 using 40mm graded agg finishing even and smooth using extra cement as in plinth protection and laid fair in alternate bays n including filler joints with sealing compound grade 'A' complete all as specifed and as directed.
M&L Damp proof course 40mm thick In cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork, complete all as specified and as directed.
M&L Reinforced cement concrete Type B1 1:2:4 (20mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span and the like, complete all as specified and as directed.
M&L Reinforced cement concrete Type B1 1:2:4 (20mm graded aggregate) as in shelves, slab and the like, complete all as specified and as directed.
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and as directed.
M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed.
M&L TMT bars 10 mm dia and over , cut to length, bent to shape required, including crancking, bending spirally for hooping for columns ,hooking ends & binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.
M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.
Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc complete all as specified.
M&L for overhauling/ servicing of ceiling fan of any make any model complete after dismantling it and cleaning all parts of fan internally and externally and applying greasing, oiling of bushes and bearings including replacement of bush, bearing, split pin, rubber reel, nuts and bolts, mild steel ‘U’ clamp, fan condenser, Painting of canopy (both Upper & Lower) with one coat of synthetic enamel paint (White colour for ceiling fan) with and including and replacement of copper flexible cord twin core of suitable length not exceeding 0.5 meter length from ceiling rose to ceiling fan including assembling all repair parts of fan and testing it for smooth functioning with and including taking down of ceiling fan and refixing the same in new/ same position complete all as specified and as directed.
M & L for point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through PVC casing capping with all accessories incl PVC sunken boxes of approved size for fixing switches, sockets etc and 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity complete all as specified and directed.
All as per item No. 118 above but for one fan/Exhaust fan point
All as per item No. 118 above but for 5 amps socket on same board
All as per Ser item No.118 above but for 5 amps socket on independent board.
All as per Ser item No.118 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.
S&F switch piano type, 5 Amp. SP, one way all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F socket outlet, 2 in one 5 pin, 5 Amp, piano type all as directed/ specified. Make- legrand/Anchor/ Havells
S&F switch piano type, 15 Amp. SP, one way all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F socket outlet 2 in 1, 6 pin 5 and 15 Amp flush type universal all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified.
S & F electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan complete all as specified . Make- Anchor/Leader/Standard
Supply and Fix wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells,Cat No-LHEXARP7SN1W020 or equivalent make of Philips/Surya/CG/Orient.
S&F 25 W LED security light ,IP 66 ,230V environment friendly with operating temperature -10 to 50 degree celsius, operating voltage range 140 to 270 Volts, system lumen > 2500, colour temperature >= 5700K suitable for pole dia 43mm (max) including GI bend Pipe of length 1.5 Mtr fit for mounting including all its accessories complete all as specified and directed. Make havells,Cat No-ENDURASUNDOWNSL25WLED765PASYBOTGIHD or equivalent make of Crompton/ Philips /BAJAJ/Surya
S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/C&S/legrand/hager.
S & F MCB DP 6 to 32 Amps, B series, 230 Volts complete all as specified and directed . Make - Standard/Havells/C&S
S & F MCB SP 6 to 32 Amp, B series , 230 Volts complete all as specified and directed . Make - L&T/Havells/C&S/legrand/hager.
M&L for sub main wiring through PVC casing caping with two run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length, complete all as specified and as directed.
M & L Earthing complete with GI earth plate electrode 60cmX60cmX6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth wire of dia 4mm as earthing conductor and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified locations and as directed by the Engineer-in-Charge. Note: 1.The above quoted rate shall include cost of main earthing lead wire of 4 mm dia, charcoal, salt, excavation and earth work in any type of soil CI cover, funnel with 20mm dia light grade GI water pipe including GI protection pipe 40mm dia light grade for earth strip etc. 2. The cost of earth pit is deemed to be included in the unit rate. 3. The cost of taking down old unsv earthing with all its accessories is deemed to be included in the unit price.
S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq mm 2 core including taking down old unsv cable complete all as specified and directed.
M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.
Supply, lay and fix 40 mm bore galvanized iron water tubing low grade including all fittings and fixed/ laid in trenches or on poles complete all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)
PRAKASH FURNITURE WORKS
Chinmay Traders
AVASANA SOLUTIONS PRIVATE LIMITED
THE BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .