Construction of building for anganwady no.108

Amount

Material supply for the Construction of building for Anganwady Number No.108

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Coarse sand (zone III)

Portland Cement

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Sundries

Solid blocks of size 30x20x20cm

Solid blocks of size 30x20x15cm

wall form panel 1250x500 mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Solid blocks of size 40x20x10cm

Stone Aggregate(single size): 40 mm nominal size

Fine sand (zone IV)

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Plastic emulsion paint

Twisted steel/deformed bars

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable span ESO+SI (2.35-3.40)

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Flats up to 10 mm in thickness

200 mm Aluminium aldrop

Iron hooks & eyes 100 mm

Oxidised mild steel tower bolt (barrel type) 200x10 mm

Oxidised mild steel screws 30 mm

Oxidised mild steel handles 125 mm

Oxidised mild steel screws 25 mm

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Mild Steel round bar above 12 mm dia

Pink primer (for wood)

Polyethylene water storage tank with cover and suitable locking arrangemnet

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

C.I. bracket for wash basin and sinks

Vitreous China orrisa type w.c. pan size 580 mm

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

100 mm S.C.I. trap with vent heel

PVC pipe 25 mm outer dia. 10kgf cm2

PVC pipe 50 mm outer dia.6kgf/cm2

PVC pipe 110 mm outer dia 6kgf/cm2

PVC bend 110 mm dia

Mild steel tubes hot finished welded type

Welding by electric plant

Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement