Janpad Ballia me Shrirampur Ghat setu ke Pahuch marg Shipur Diyar numbari se pranpur Bihar avm Uttar Pradesh ki seema par Pravesh Dwar Nirman me Praksh Vyvstha ka kary

Supply/Fixing , testing and commissioning of 6 Mtr all in one Solar Intergrated pole system with aesthetically designed road lighting optic luminaire of IP 66 & Integrated Pole, 6 mtr. Solar pole Light with 5 year warranty against any manufacturing defects Complete in all respect.1 Svstem lumen >6000Lm with etficacy of > 140 Im/watt, System wattage shall not be more than 45 W. Life expectancy> 50000 Hr. çolor temperature 4000 K, standard light profile 6 H 100%+ 6 Hr 50%, working temperature 10 to +60, CRI>70 average lighting beam angle 120 degree, housing pressure die cast aluminium with corrosion resistance polyester powder coated, Impact resistance > IK 07, lamp starting time should be not more than 10 seconds, thermal management system should be provided and LED must be mounted on heat conductive sink with sufficient large surface area by means of fins to dissipate the heat to ambient air, Over voltage Protection. 2 Battery capacity minimum 100 Ah, Life P04, life cycle minimum 2000 @ 90% DOD with IP 68. With minimum backup for Two days @ standard light profile 6 Hr 100 % +6 Hr 50% per day.3 PV module- Monocrystalline minimum 360 Wp/23 Voc Solar cell efficiency minimum 16.4%, 8 site string, total nominal peak power output minimum 360wp, Water proof connctors. 4 Total Aluminum alloy coloumn length 6 nitr. with mininum 26 mm thick reinforceced base plate, or Total column length 6 mtr with lower 2.0 mtr galvanised / povder coated MS Oipe of min 04 mm thick with minimum 12mm thick rainforced based plate, upper 4 mtr. Aluninium alloy to hold solar P'V module and Luminiare. 5 Foundation 1:2:4 RCC Cross section: Minimum 2 times size size of base plate Deep: Minimum 1/6 times length of poleFoundation Bolt Minimum 20mm dia and 600mm long (6) Test Report 1. Standard fixture should confirm to applicable IEC 60598-1, IEC 61000-3-2, IEC 61547. LM 79 & LM 80 BIS 2. Test report for LED LM 80(IS-16105), Internal wiring, fiber glass, insulted multistrand wire 3. Over voltage Protection Declaration of Conformity safety compliance report for charge controller and should be certified as per IEC 60598-1, IEC 61000-3-2, IEC 61547 4. Test report for vertical pole tested for shock & vibration, wind force to meet safety parameters.5. Battery test report time 3rd party, along with other test reports. IEC 62133:2012, BIS Certification etc. 6. BIS, IEC 61215, IEC 61730 for Solar PV Panel (Excluding GST)

Comprehensive Operation and maintenance of all in one Integrated solar light system for five year (2.5% per year after one year) (Excluding GST)