REPAIRS MAINTENANCE WORKS TO FLOOR WALL ROOF SANITARY FITTINGS JOINERIES AND CERTAIN OTHER ITEM AND PERIODICAL SERVICES WELCOME MAINTENANCE TO MD AND OTM ACCNS BLDGS AND BOUNDARY DWARF WALLS IN K AREA AT KATARIBAGH UNDER GE NW KOCHI

Amount

Dismantling of Wall or ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets etc. keep in safe custody for reuse complete all as specified and as directed .

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre; including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and incl provn of 4mm thick Non asbestos fibre cement building boards laid/ inserted to GI framework complete all as specified and directed.

Dismantling of boarding of any description, fixed in any position with nails complete all as specified and as directed.

M&L for 2nd class hard wood weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed complete all as specified and as directed .

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed .

Dismantling tile battens of any size including tiling fillets spaced exceeding 15 cm centre to centre complete all as specified and as directed.

S&F Second class hard wood clean sawn battens for tiles fixed at 30 cm centre to centre, sectional area exceeding 5 Sqcm and not exceeding 15 Sqcm complete all as specified and as directed.

All as per Item No 7 above but fixing only battens complete all as specified and as directed. Note: Battens obtained from dismantlings shall be reused.

M&L for preparing surface of tiles or slate battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with creosote complete all as specified and as directed .

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed .

All as per Item No 10 above but except tiles complete all as specified and as directed. Note: Tiles obtained from dismantlings shall be reused..

S&F Mangalore pattern roofing tile 15 cm x 23 cm size over chajja top or sloped surface with cement mortar bedding 1:4, both edges as rounding on junction of wall with cement mortar all as specified and as directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in Cement Mortar 1:6 complete all as specified and as directed.

All as per Item No 13 above but except tiles complete all as specified and as directed. Note: Tiles obtained from dismantlings shall be used.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed .

S&F EURO GUARD PRO SQUARE UPVC Rainwater Gutter (220 mm), with all necessary fittings, clamp, joints, end cap, corner drop, centre drop, etc joining compounds, nut, bolts or screws etc and fixing in position, at any height complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls (jointing shall be done with solvent cement) complete all as specified and as directed .

S&F PVC (SWR) bends, any radius, 110mm bore complete all as specified and as directed .

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nainital or similar pattern roof covering complete all as specified and as directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S&F 0.71 mm thick, aluminium sheeting alloy 31000 H4 in ridge, hip, valley gutter, drip and straight flashing (length and grith as fixed) complete all as specified and as directed.

S&F for pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and all as directed.

S&F for pre-painted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and all as directed.

S&F Roof trusses (framed) confirming to Fe 410W, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed by Engr in Charge.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275. complete all as specified and as directed .

Cleaning vegetation growth over MP tiles roof / RCC roof / chajja etc up to two story complete all as specified and as directed by Engr-in-charge. Note: The quoted rate shall include cost of necessary scaffolding etc complete.

Supply only Liquid Water Proofing Compound complete all as specified and as directed by Engr-in-charge.

M&L for Water Proofing Treatment by applying oil bound bituminous primer 0.20 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 Kg/ Sqm, reinforced with non-woven polyester matt not less than 160 g/sqm, having softening point not less than 1400 C longitudinal tensile strength not less than 650 N/5Cm tearing strength of 180 N by torque application including minimum 10 cm side overlap and 15 cm end lap and applying a coat of blown grade hot bitumen 85/25 conforming to IS : 702 heated to a working temp of 180 degree and applied @1.2 Kg/ Sqm, finishing the surface with solar reflective bituminous aluminium paint @ 100 g/ Sqm, over and including 20 mm thick screed bed on concrete/ brick surfaces in CM 1:3 including WPC as per manufacturer's instructions complete all as specified and as directed by Engr-in-Charge and as per manufacturer's instructions.

Taking down chowkats with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm complete all as specified and as directed.

Taking down shutters of any description, area not exceeding 1 Sqm each complete all as specified and as directed.

Taking down shutters of any description, but exceeding 1.00 Sqm and not exceeding 2.00 Sqm complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.00 Sqm including re-securing or easing and adjusting and refixing in same opening complete all as specified and as directed.

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm including re-securing or easing and adjusting and refixing in same opening complete all as specified and as directed.

Supply and fixing 2nd class hard wood plain, solid, straight chowkat and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified.

Supply and fixing 2nd class hard wood, 30mm thick glazed, gauged and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauze etc. size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) complete all as specified and as directed.

All as per Item No. 36 here-in-before, but divided into square with sash bars, any numbers, complete all as specified and as directed.

Supply and fixing 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauze etc. size of members of shutters as specified in SSR Part I, Section 8,clause 8.24(a) complete all as specified and as directed.

Supply and fixing 2nd class hard wood, 35mm thick panelled shutter plain, framed, panelled (any member of panels) with panel of timber flat on both sides (feather edged) or veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed..

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified.

S&F Factory made both side Prelam PVC sheet used Solid Panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified.

Supply and Fixing Factory made uPVC white colour fixed Glazed window/ ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 Sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame, the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion, extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L in repair for 5mm thick Solid PVC Wall Lining consisting of 5mm thick prelam colour PVC sheet inclusive of solvent cement and fixing including cover fillet at site on PVC frame as per specifications and drawing and as specified.

Supply and fixing aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified and as directed.

All as per Item No. 44 here-in-before but fixed in repair complete all as specified and as directed.

Supply and fixing 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

All as per Item No. 46 here-in-before but fixed in repairs, complete all as specified and as directed.

Supply and fixing butt hinges medium weight cold rolled mild steel powder coated with mild steel hinges pin for 100mm size, complete all as specified and as directed.

All as per Item No. 48 here-in-before, but 75mm size complete all as specified and as directed..

Supply and fixing stainless steel butt hinges medium weight for 100mm size, complete all as specified and as directed.

Supply and fixing extruded aluminium alloy handles fabricated type anodised 150 mm size, complete all as specified and as directed.

All as per Item No. 51 here-in-before fixed in repairs, complete all as specified and as directed.

All as per Item No. 51 here-in-before, but 100mm size complete all as specified and as directed.

All as per Item No. 53 here-in-before but fixed in repairs, complete all as specified and as directed.

Supply and fixing aluminium plate type II gate and shutter hooks and eyes of 200mm size complete all as specified and as directed.

Supply and fixed in repair, tubular towel rail, 20mm dia. brass, chromium plated with brackets fixed in repairs 60cm long complete all as specified. Make: Parry ware Cart part No.T6901A1 or equivalent to Hind ware/ Cera

Supply and fixed in repair, Stainless steel curtain rail, bright finished 25 mm dia. decorative type, complete all as specified and as directed by Engr-in-Charge.

Supply and fixed in repair, Stainless steel bright finished decorative brackets/ finials for curtain rail 25mm dia. complete all as specified and as directed.

Supply and fixed in repair, door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring in floor, 140mm over length of cover plates, complete all as specified and as directed.

Supply and fixing aluminium alloy wire cloth 0.45 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples, complete all as specified and as directed.

All as per Item No. 60 here-in-before but fixed in repair, complete all as specified and as directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty or fitted with beads not exceeding 1.50 Sqm, complete all as specified and as directed.

S&F Sheet glass, ordinary quality 3.00 mm thick and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

Supply and fixing 4.00mm thick frosted glass, pin head type and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.

S&F Ball bearing runners 45 mm, 500 mm long Telescopic ball bearing drawer channel, full extension load capacity 50 kgs complete all as specified and as directed. Make : Hexa, Shreeji, Hafele, Hettich, Sleek

S&F in repairs stainless steel auto closer counter sunk hinges complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 100mm long stainless steel handle complete all as specified and as directed by Engr-in-Charge.

M&L in repair 12 mm thick Plywood, Grade BWR type BB fixed with screws, clamps to timber frame work for Cup board self, shutter, drawer etc. complete all as specified and as directed.

M&L 18/19 mm thick Block board, Grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber frame work for Cup board shutter, drawer etc complete all as specified and as directed.

M&L in repairs, 6mm thick veneered decorative plywood, Grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nail to timber frame work complete all as specified and as directed.

S&F Aluminium powder coated sliding type window with 4mm thick plain sheet glass including provision of airtight heading and handling arrangements complete with using following section :- (i) Outer Frame 50.80x25.40x1.5mm (ii) 3 Track Frame 43.66x22x1.22mm (iii) Shutter Frame 31.80x14.50x1.20mm (iv) Shutter interlock 31.80x20.50x1.20mm

S&F in repairs aluminium powder coated frame work for partition (area of panel not exceeding 1.50 Sqm each) without sash bar, including all necessary jointing cleats, hold fasts, hinges with fixing clips, rubber gasket, anodised snap beading, anodised aluminium fittings, locking arrangement etc. (minimum thickness of powder coating 50 micron) complete all as specified and as directed. Note: Section used for partition vide Hindalco catalogue No. 9223 of size 63.58x38.10x2.00 mm (single partition vertical &horizontal sections) or of equivalent make as approved by GE.

S&F in repairs, aluminium anodised powder coated frame work for door along with shutters (without sash bar), including all necessary jointing cleats, hold fasts, hinges with fixing clips, rubber gasket, anodised snap beading, anodised aluminium fittings, locking arrangement etc. (minimum thickness of powder coating 50 micron) complete all as specified and as directed. Note: Section used for door are vide Hindalco catalogue No. 9258 of size 50x44.50x1.80 mm door vertical stiles, catalogue No. 9286 of size 50x45x1.50 mm door Top and middle /lock rail, catalogue No. 9246 of size 100 x44.50x1.85 mm door bottom rail or of equivalent make as approved by GE.

S&F in repairs, 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed .

M&L for 5 mm thick sheet glass, ordinary quality, fixed with glazing clips/ aluminium cleats in square, not exceeding 0.50 sqm in each pane, complete all as specified and as directed .

S&F in repair UV protection sun control film for window and door glass complete all as specified.

S&F Stainless steel wire cloth 0.36mm nominal dia. of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .

S&F in repairs aluminium anodised grill, having mesh size 50 mm x 50 mm, made out of 6 mm wide 3 mm thick aluminium section including 'U' clips and all necessary fixing arrangements, complete all as specified and as directed .

Demolition of reinforced cement concrete in ground floor and paving's not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for providing pre-cast cement concrete 1: 2 : 4 Type B1 using 20mm graded stone aggregate as in cover slab, shelves, cooking slab and similar articles and set in CM 1: 6 including necessary formwork complete all as specified and as directed.

M&L TMT bars 10mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.

All as per Item No. 82 here in before above but 6mm to 8mm dia TMT bars complete all as specified and as directed.

Dismantling of floor hearth or wall tiles including Cement Mortar bedding (but not backing) and disposing the rubbish off the premises as directed.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick square/ rectangular area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including provision of bedding layer in cement screed 15 mm thick in CM (1:6) all as specified and directed.

All as per Item No. 85 here-in-before, but in vertical surfaces as dados/ skirting but glazed ceramic tiles of size 300 x 200 mm x 7 mm thick including provision of backing coat 10 mm thick in CM (1:4) complete all as specified and as directed.

Material and labour for Glazed ceramic tiles in vertical surfaces 350x 250x 7 mm/ 450X 350X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including provision of backing coat 10 mm thick in CM (1:4) complete all as specified and as directed.

M&L for Non - Skid Ceramic tiles 9 to 10 mm thick, area of each tile exceeding 0.18 Sqm, but not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including provision of Cement screed 15 mm thick bedding layer in CM (1:6) all as specified and directed. Complete all as specified and as directed.

All as per Item No. 88 above, but as in vertical surface over and including provision of backing coat 10 mm thick in CM (1:4) complete all as specified and as directed. complete all as specified and as directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.

M&L for 25 mm thick PCC 1:2:4, Type B-0 using 12.50 mm graded stone aggregate as in levelling course to floors complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4, Type B-0 (using 12.5mm graded stone aggregate ) as in repair top surface of pavement and flooring etc. and surface finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge

M&L for 100 mm thick Cement concrete 1:2:4, Type B-1, (20mm graded stone aggregate) as in flooring finished surface even and smooth without using extra cement complete all as specified.

M&L for 75mm thick Cement concrete 1:3:6, Type C-2 (40mm graded stone aggregate) as in plinth protection complete all as specified and as directed by Engr. in Charge

M&L for 75mm thick Cement concrete 1:4:8, Type D-2 (40 mm graded stone aggregate) as in sub base complete all as specified and as directed by Engr. in Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded in any mortar complete all as specified and as directed.

M&L Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling and ramming as specified complete all as specified and as directed by Engr. in Charge.

M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, with grey cement and pigment complete all as specified and as directed by Engr. in Charge.

All as Item No. 100 herein above, but except paver block complete all as specified. Note: Paver block obtained from dismantlings vide item no.98 shall be reused.

M&L for coloured pre-polished rubber moulded chequered cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with 3 mm spacer bar, set, jointed and pointed in neat cement slurry as in floor with grey cement and filling joints with colour pigment over and including 20 mm thick screed bed in Cement Mortar 1:6 including dismantling of old tiles complete all as specified and as directed. Make: NTC

M&L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in Cement Mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, machine cut, polished granite 1st quality including grinding and moulding of edges complete all as specified and as directed. Note: Sample of granite should be passed by GE before execution of work.

Supply and fixed in repairs vitreous China wash down water closet (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe complete all as specified and as directed.

S&F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including single trap spun casted 60 cm long fix in Asian epoxy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

Supply and fixed in repairs vitreous China wash down water closet single piece (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe complete all as specified and as directed. Make : Parryware single piece suite Apollo C8939 (S-220) (690 x 375 x 730mm) or equivalent model of other manufacturers from the list.

Supply and fixed in repair plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. Make : Cera / Parryware / Hindware

Supply and fixed in repair plastic water closet seat for single piece closet, white, closed pattern with flat bottom, and cover and mild steel chromium plated or alumininsed hinging device complete all as specified and as directed. Make : Parryware EWC Seat cover E 8305 Ultra Solid white or equivalent model of other manufacturers from the list.

Supply and fixed in repair PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets 10 Litres capacity including flush pipe PVC connections etc. complete all as specified and as directed

Supply and fixed in repairs vitreous China wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets complete all as specified and as directed.

S&F in repair, pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Pillar Tap with aerator Parryware Cart Part No.Crust T3102A1 or equivalent model of other manufacturers from the list.

S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 grams) complete all as specified and as directed.

S&F in repairs, PVC bathroom cabinet (white) of size 420 x 300 x 100mm (approx.), with one single shutter and built in mirror in front of shutter complete all as specified and as directed by Engr. In Charge.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12 cm wide with chromium plated guard and railing size 60cm long (with brass bracket complete all as specified and as directed.

S&F in repairs, corner glass shelf of 5mm thick plain sheet glass and with brass, chromium plated bracket complete all as specified and as directed by Engr. in Charge.

S&F in repairs, PVC backing looking mirror of size 45cmx60cm fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engr-in-Charge.

M&L for 2 mm thick High Performance Modified Self-Adhesive Membrane SBS (Styrene Butadiene Styrene) based waterproofing membrane with high density polyester film on one side and easy-to-peel silicon film on the other side on roof including cleaning and preparation of surface complete all as specified. Make : STP Ltd. or equivalent approved make.

Demolition of Pre-cast cement concrete block built in cement mortar including all quoins, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by Engineer in Charge.

M& L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in Cement Mortar 1:6, Type C1, 1:3:6 (using 20mm graded stone aggregate), complete all as specified and as directed by Engr. in Charge

Taking down cement plastered on Brick / Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by Engr. In Charge.

M&L for rendering 15mm thick on brick or concrete wall surfaces with cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed by Engr. in Charge.

M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of ceiling surfaces finished even and smooth complete all as specified and as directed by Engr. In Charge.

M&L for rendering 10mm thick on brick or concrete wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engr. In Charge.

M&L preparation of new decorated surfaces of walls (plastered or unplastered) including cornices and applying two coats of cement base paint over a coat of priming complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new decorated surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engr. In Charge.

M&L preparation of new plastered surfaces of walls (plastered or unplastered) including cornices and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed by Engr. In Charge.

S&F in repair Stainless Steel soap dish complete all as specified. Make : Parryware Cat. part No.T6902A1 or equivalent make of Cera / Hindware

S&F in repair stainless steel sink with draining board made out of 1mm thick sheet kitchen or laboratory with plugs, washers including bedding lime cement mortar to dwarf wall or including fixing cantilever brackets fixed to wall and connecting union to pipe overall size 914x460x203mm bowl size 405x354x203 mm including waste coupling and waste pipe complete all as specified and directed.

S&F in repair stainless steel sink 1 mm thick kitchen sink with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified.

Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for damp proofing course, etc., and making good, cutting exc. 20 cm girth complete all as specified and as directed.

Supply and fixed in repairs PTMT gratings with provision to receive the waste water pipe and fixed with white cement alround, 100 mm dia with minimum weight 25 gms complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls including cornices (plastered or unplastered) and applying one coat of white wash complete all as specified and as directed by Engr. In Charge.

All as per Item No. 130 here in before, but on ceiling complete all as specified and as directed by Engr. In Charge.

M&L preparation of old decorated surfaces of walls (plastered or unplastered) including cornices and applying one coat of distemper oil emulsion complete all as specified and as directed by Engr. In Charge.

M&L complete removal of old decorated surfaces of walls (plastered or unplastered) including cornices preparation and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed by Engr. In Charge.

M&L for applying 3mm thick wall care putty on old and new plaster surface of wall complete all as specified and as directed by Engr. In Charge.

M&L preparation of old decorated surfaces of walls (plastered or unplastered) including cornices and applying one coat of cement base paint complete all as specified and as directed by Engr. In Charge.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exceeding 10 cm width or girth including preparation of new surface complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr. In Charge.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one finishing coat of synthetic enamel paint complete all as specified and as directed by Engr. In Charge.

M&L for preparation of new steel surfaces and applying two coats of anti corrosive paint over a coat of appropriate primer complete all as specified.

M&L for writing letters of figures (BLOCK, ROMAN, ITALIAN OR INDIAN) not exceeding 30cm high all as specified and directed by Engr in Charge. Note : Writing shall be done with thick paint so that they stand out boldly.

M&L preparation of old decorated surfaces of walls (plastered or unplastered) including cornices and applying one coat of exterior emulsion weather coat paint complete all as specified and as directed by Engr. In Charge.

M&L preparation and cleaning of old decorated surfaces of MP tile roofs (plastered or unplastered) including cornices and applying one coat of exterior tile guard emulsion paint complete all as specified and as directed by Engr. in Charge. Make : Nerolac Excel Tile Guard Emulsion Paint / Equivalent make of Berger / Asian Paint.

Material & Labour for complete removal of existing treatment from wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 Gm./litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for preparation of old surface of wall & applying one coat of anti fungal paint complete all as specified and as directed.

M&L for preparation, cleaning, washing, removing of all dust, mud, etc. from paver blocks, cement tiles & concrete floors and applying one coat of Indigo PU Floor coat paint (polyurethane modified coating) or equivalent product of approved manufacturers complete all as specified and directed.

M&L preparation of old painted plastered surfaces of any description over 10cm width or girth and applying one coat of plastic emulsion paint complete all as specified and as directed by Engr. In Charge.

M&L for preparation of old decorated surfaces of wood or wood based material exceeding 10cm width or girth and applying one coat of synthetic varnish as finishing coat complete all as specified and as directed by Engr. In Charge.

S&F in repair Brass Mortise lock, two levers vertical type, size 100 mm size

Taking down and repairs to aluminium door with and including glazing clips, jointing clits, rubber gasket etc and refixing in same opening after repair complete all as specified and as directed.

S&F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S&F in repair 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description exc 10cm width or girth and applying two coats of anti corrosive paint over a coat of appropriate primer complete all as specified.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M&L for wall cladding/elevation tiles 300 mm x 600 mm x 10-15 mm thick with stone finish of approved design set and jointed in neat cement slurry @ 3 kg per Sqm and pointed in white or cloured cement to match with shade of tiles complete as specified and directed.

M&L for heavy duty outdoor vitrified tiles 400 mm x 400 mm x 10-12 mm thick of approved design set and jointed in neat cement slurry @ 3 kg per Sqm and pointed in white or cloured cement to match with shade of tiles complete as specified and directed. Make:- Kajaria Duratech/or any other equivalent make as approved by GE

POOJA ENGINEERING WORKS

ANIE JOHN CONTRACTORS

MS BUILDERS

LAKSHMI BUILDERS

Vackachan Constructions

Albert Rebello and Company

shine industries