Loading
Loading…
Loading…
Tender Value
₹4.2 Cr
EMD Value
₹8.4 L
Closing Date
25 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
16 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender
UPLOADING OF THE CERTIFICATE:-The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure- V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP)etc., as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
DEFINATION OF SIMILIAR NATURE OF WORK:-Any Work of PI / RRI 1.1.1 /ABS/IBH work /LC gate interlocking which includes indoor and out door signalling work.
8 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All payment and other conditions are attached with tender document.
Although year of specification is given in the schedule, last amendment, if any, shall apply.
All tenderer must have valid GSTN number and rates must be inclusive of GST Act and itsamendment.
Compliance of GST act/rules & correction/modification issue by railway board with regard toGST act shall be binding on contractor & railway.
Genral instruction :- 1 The offer will be evaluated based on certificates enclosed with theoriginal offer only. The Railways will not enter into any correspondence to get thesecertificates subsequently and the offer shall be evaluated based on the documents submittedalong with the offer.2 Tenderer may please note that meeting of eligibility criteria is strictlybased on completion certificates issued by the executive in charge of work and not linkedwith mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways. 3 Tenderer may please note that fulfilling of eligibility clause shall beascertained only from the completion certificates issued by the executive-in-charge of workand mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways shall not be enough. It may also be noted that cognizance of thoseworks, which are nearing completion or have been almost completed, shall not be taken onlythose completion certificates, wherein successful commissioning satisfactory performanceof work have been clearly unambiguously acknowledged by Executive-incharge of anyRailway Unit or any Govt. Dept./Undertaking for any similar work shall be considered for thispurpose.4 Any variation to quantities in any item and its associated wiring material account ofsupply and installation will have to be born by the tenderer. Railway Engineer s decision inthis regard shall be final.5 All drawings related with the work can be obtained from the officeof DRM Kota on any working day during office hours.
Replacement of old and outlived POLB's over Kota Division for improving reliability of Signalling installation.
KOTA-SNT-SIG-2026-03~WCR
KOTA-SNT-SIG-2026-03
Open
Works - General
18 Months
Kota, Rajasthan
₹0
₹8.4 L
25 Jun 2026
26 May 2026
11 Jun 2026
47 items across 2 schedules · ₹4,19,54,293.17 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of QNA1 (AC immunised relay), 12F-4B and 8F-8B, 24VDC along with plug board (Base plate), retaining clips and connectors conforming to BRS:931A, IRS:S34 & IRS:S23. Break-up of configuration will begiven by railways before supply of material. | Numbers | 168.00 | 5,437.68 | 9,13,530.24 |
| 2 | Supply of relay QN1 (Non ACimmunized relay), 8F-8B/12F-4B (24V) along with plug board (Baseplate), retaining clips and connectorsconforming to BRS:930, IRS:S34 &IRS:S23. Break-up to be taken fromRailways before supply of material.No.2846459.07 542,561.88 | Numbers | 84.00 | 6,459.07 | 5,42,561.88 |
| 3 | Supply of Relay QNNA1 4F/4B | Numbers | 84.00 | 4,987.24 | 4,18,928.16 |
| 4 | Supply of Plug In type, two DC neutral line, mechanically interlocked, in mini group housing, complete with base plate each 60V 4F.4B, front and back contacts metal to metal conforming to IRS:S 46, S23, S34 as applicable and firms specification The relays of various contact configuration shall be 5F/3B - 35%, 4F/4B - 65% or as specified by site incharge. | Numbers | 168.00 | 11,484.76 | 19,29,439.68 |
| 5 | Supply of Key Lock Relay AC immunised with different ward combinations (Five extra sets of ward plates to be supplied with each relay). Siemens make working on 24/60V DC 4F/4B or equivalent (Extra No. of wards to be supplied with the consultation of Engineer in charge of work, as per requirement of site and no additional cost will be paid for extra wards). The ward combination shall be A, B, C, D, E, F , G--------Z. | Numbers | 84.00 | 14,091.15 | 11,83,656.6 |
| 6 | Supply of PVC insulated flexible wire 16/0.2 mm dia as per RDSO spec. Nos.IRS:S-76/89 with latest amendments of various colours to be decided by Sitein-charge. | Kilometre | 26.00 | 8,160.65 | 2,12,176.9 |
| 7 | Supply of PVC indoor cable 1x24x1 mm dia colour coding ofinsulation of inner core shall be in six colour viz. Blue, Red, Green, Grey, Brown & Black conforming toIRS 76/89 or latest | Kilometre | 3.00 | 1,81,786.28 | 5,45,358.84 |
| 8 | Supply of two in two out (4 conductor) Knife edge disconnect terminal block set as per RDSO/SPN/189/2004 ver. 3.0 with latest amendment. | Numbers | 8400.00 | 90.5 | 7,60,200 |
| 9 | Supply of Earth Electrode assembly as per Drg. No. S&T/CON/KOTA/EARTHING/01 ALT - 01. All nut, Bolts & Lugs to be of stainless steel. The earth electrode pipe shall be 'B' Class/ Medium Grade as per Specification No. IS: 1239 Pt. 1/ 2004 of Nominal Inner Dia 50mm, Outside dia (Max 60.8 mm, Min 59.7 mm), Thickness (3.6mm), Tolerance in Thickness ('+' not limited, '-' 12.5 percent). | Numbers | 252.00 | 1,779.6 | 4,48,459.2 |
| 10 | Supply of maintenance free earth consisting as per Latest RDSO TAN " STS/E/TAN/3006 Ver 3.1 Dated:25/06/2025" consisting of single earth pit which includessupply of 35 mm²/16 mm²/10 mm²multistrand single core PVC insulatedcopper cable as per IS 694 forconnecting main earth electrode toMEEB in the equipment room induplicate as per manufacturersrecommendations and as per RDSOspecifications as follow: (MaterialInspected by RITES) (a) Supplyportion (b) Copper bonded steelelectrode of 3.0 meters long, 17 mmdiameter with copper bondingthickness of minimum 250 micronsand UL listed and marked: 1 Nos. (c)Earth enhancement compound ofRDSO approved brand supplied insealed bag of minimum 10 KG: 3Nos. (d) Copper strip of 150mm X 25mm X 6 mm to terminate earth rod:1 Nos. (e) Copper strip of 300mm X25 mm X 6 mm (MEEB): 1 Nos. (f)Copper strip of 150mm X 25 mm X 6mm (MEEB): 1 Nos. | Set | 20.00 | 26,145.4 | 5,22,908 |
| 11 | Supply of Electrically operated Lifting Barrier assembly as per RDSO spec. No. - RDSO/SPN/208/2012 Version 2.0 or latest without hand generator operated on 110 V AC voltage. This consists of 2 No. of electically operated lifting barriers, each boom barrier shall be 32 feet long (4 sections of 8 feet long), 2 pedestals, 8 band circuit controller with limit switches, hand cranks, 2 electric motors 110V AC with maximum current rating, 2 stop boards, 2 No. boom light boxes, CI counter weight & 2 No. of boom support for resting boom and Motorised locking at Lock posts assembly, without fringes, push button type gate control to operate the gate. Crank handle arrangement will be as per Rly. requirement. The movement of the boom over 85 degrees to be restricted mechanically. Motorised locking at Lock posts assembly as per RDSO letter No. RDSO-QAST0LKO (VEND /3/2020-O/o ED /QA /SnT /HQ /RDSO dted 11.08.2025. TAN spcs: STS/E/TAN/3020 Ver 1.0 | Set | 42.00 | 2,83,200 | 1,18,94,400 |
| 12 | Supply of LED type Indicationcum operating panel to bemade of size of 54 mm x34mm cover plates depicting the yard layout, unit signal,track etc. of minimum size(12x8) siemens type Dominoscomplete wired with fullcomponents. The panel shouldhave polycarbonate sheetcover on top to avoid damagewhile in service Each of theworking domino should haveall 15 terminals componentswith wiring. Total No. ofDomino (12 x 8) = 96 Nos.Size 54 mm x 34 mm. Thelength approximately 730 mmx 450 mm. The height isapproximately 910mm (rearside) and 820 mm (frontside). The panel should havepoly carbonated sheet coveron the top. SPARE: 10% ofworking domino with coverplate completely wired and10% of LEDs of each colour,10% (minimum three) ofbuttons, 10% of counter, 2magnets, 1 buzzer & 4 bulb extractors shall be handedover as spare aftercommissioning of theinstallation by the contractor. | Numbers | 5.00 | 29,438.08 | 1,47,190.4 |
| 13 | Supply of Motorized Locking. One Set Consists of 2 Numbers of Locking arrangements units for 110 AC ELB complete with motor, gear rack & pinion slide unit, 4 no. limit switch, wiring, terminals, enclosure box & base stand compatible with existing Heidz make Electrically operated lifting barrier. | Set | 38.00 | 61,360 | 23,31,680 |
| 14 | Supply of Electro Magnetic boom locking system with +VE VC boom locking, LED indicator panel with Buzzer and Indication circuit. Operating Voltage 110VAC or 24 V DC with 110VAC/24VDC Adoptor. Electric current 500 MA Magnetic Lockin power 600 lbs. Magnetic convert Area for boom locking arrangement si As per specifications attached in Drawing No. DRM/KOTA/LC BOOM MAGNET/2024. | Numbers | 80.00 | 5,548.36 | 4,43,868.8 |
| 15 | Supply of Timing Belt for locking in ELB. confirming to RDSO/SPN/208/2012 ver. 2.0.or latest amendment. | Numbers | 320.00 | 460.2 | 1,47,264 |
| 16 | Supply of Limit switch New Top Roller type with 2 No + 2 NC contacts as per RDSO 45 Balaji make model No.102TPR A or similar. | Numbers | 480.00 | 913.7 | 4,38,576 |
| Schedule total | ₹2,28,80,198.7 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .