Electrifiction Work At Group of Temple Jageshwar

Amount

Electrical Works Under S.R. at Group of Temple Jageshwar District Almora -Uttarakhand

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.- Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor ingle core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required : (2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessedconduit as required : (25mm)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) : (12 way (4 + 36), Double door)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. : (Single Pole)

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.:( 63 A)

Provision for making 20x20x20mm grooves in RR stone masonry wall for concealed wiring in PVC conduit pipes including proper finishing and making good after completion of work as directed by engineer-in-charge

Supply of following illumonaries comprising of basic channel, holder, electronic ballast/ low loss copper ballast starter, condenser, control gear box complete with decorative attachments, lamps etc. as per specification ans as per catalogue given below :(Copper Meatl cover for the LED bulb (10.5 inch, 14-1/2-inch)

LED bulb upto 50W

LED ground light upto 20W

Fixures saddle,ss crews and all other necessary fixures

Installation of LED bulb camouflanged in Copper metal cover complete with all kind of accessories as directed by site-in-charge

BIJENDRA SINGH CHAUHAN