SPECIAL REPAIR TO MD ACCN BLDG NO P-02 (02X OFFRS QTRS) AT FAD BADDOWAL UNDER GE LUDHIANA

Amount

Sch 'A' sec-I

Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:4.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 as in half bricks.

Dismantling water tanks of capacity 250 to 500 ltr and removing to store.

S & F for rotational moulded polyethylene water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position including GI tank nipple and union suitable for water tank.

Dismantling water tanks of capacity Exc 500 & n exc 1000 Ltrs r and removing to store.

S & F for rotational moulded polyethylene water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position including GI tank nipple and union suitable for water tank.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. And hoisting if required reconnecting and re-fixing in position. (Cleaning separatelyrepairing, etc. Measured.

S & F for stainless steel plate track of standard pattern and of size 600mm X 750mm X 250mm thickness of stainless steel sheet shall be 0.56 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed.

Supply only Integral water proofing compound.

S&F for ball brass valves 20 mm bore, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm thick, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level).

M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per item No 15 above but for work on vertical surfaces such as skirting risers to steps etc

M&L for vitrified ceramic coloured tiles 8-10 mm thick (square/rectangular) area of each tile exceeding 0.36 sqm, in floors skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per item No 17 above but for work on vertical surfaces such as skirting risers to steps etc.

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) cills, cooking platforms, in steps, jambs, pillars, window-cill and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including edge moulding.

Taking down chowkat with shutter (without taking off shutter from frame) exc 1.5 sqm but n.exc 4 sqm each.

Taking down chowkat with shutter (without taking off shutter from frame) n exc 1.5 sqm each.

Taking dwon shutter exc 1 sqm but n exc 2 sqm each and remove to store yard complete.

M&L for Box type steel window/ventilator made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sach bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and F1 2mm thick welded/screwed to frame for fixing of glass/wire mesh incuding fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf. Note:- MS guard bars, sheet glass, wire mesh and painting shall be measured and paid seperately.

M&L for hacking out old broken glass ( any thickness, size, quality or description ) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads complete.

M& L for sheet glass ordinary quality 5.5 mm thick and glazing with oil putty in squares n. exc 0.50 sqm each pane.

M&L for solid PVC door/window frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixing in operating as per specifications given in SSR 2010 (Part-II) complete all as specified and directed.

S&F for factory made solid pannel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stile and plain colour PVC sheet for top rail , lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing to frame at site as per specification complete all as specified and directed.

Supply and fixing for pressed steel frames 125 x 60 mm and 1.25 mm thick MS sheet with one or more rebates including necessary lugs /hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate, complete all as specified and directed including cement concrete type B-1 1:2:4 using 20 mm graded stone aggregate as in filling hollow of frame with plain cement concrete and hold fast complete all as specified & directed.

Supply and fixing for pressed steel frames 105 x 60 mm and 1.25 mm thick MS sheet with one or more rebates including necessary lugs /hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate, complete all as specified and directed including cement concrete type B-1 1:2:4 using 20 mm graded stone aggregate as in filling hollow of frame with plain cement concrete and hold fast complete all as specified & directed.

M & L for 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S & F for 30 mm thick factory made flush shutter solid core construction with block board core and plywood face panels commercial type on both side complete all as spd and directed.

S&F for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples.

Supply and fix in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples.

S&F for butt hinges medium weight 100 mm cold rolled mild steel.

S&F for aluminium anodised barrel tower bolts of extruded section and fixed of size 200 mm long.

S&F for aluminium alloy 300 mm long anodised sliding door bolt with hasp,staple ( bolt type ) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed.

S&F for 300 mm long ordinary rat tail rod paltren spring incl roller and roller plate complete (Mild steel)

S&F for aluminium handle Extruded aluminium alloy handles fabricated type anodised of size 150 mm long.

M & L for two coat of synthetic enamel paint over a coat pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth including preparation .

M & L for two coat of synthetic enamel paint on steel surfaces of any description, not otherwise described over 10cm width or girth including preparation.

M & L for preparation of old wooden surfaces of any description exc 10 cm in girth and applying a coat synthetic enamel paint .

M & L for preparation of steel surfaces of any description exc 10 cm in girth and applying a coat synthetic enamel paint .

Taking down cement plaster on brick wall etc incl racking out joints hacking for key scrubbing down with water etc. complete all as spd & directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cm 1:4 finished even and fair complete all as specified & directed on external surfaces .

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cm 1:6 finished even and smooth with out using extra cement complete all as specified & directed.

Taking down steel water tubing of 15 mm dia bore incl connection & removal to store.

Taking down steel water tubing of 20 mm dia bore incl connection & removal to store.

M&L for mild steel GI tubing 15 mm bore medium weight fixed to walls.

-ditto- all as per item No 48 above but 20 mm.

S&F for sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.

Supply and fix in repair 10 ltrs capacity PVC symphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets, fush pipe of polyethylene of low or high density or PVC. 32 mm dia.

Supply and fix in repair Vitreous China squatting pan orissa pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe, complete all as specified & directed.

S&F for vitreous China wash basin, white or in matching colour of tiles , flat back, size 550x450 mm excluding taps,but including 32 mm dia waste coupling chromium plated brass and PVC waste pipe 750 mm long( Minimum), brackets for fixing any size, including cutting for and pinning in ends of brackets or erecting stand as directed by Engineer in Charge fixed in repairs.

S&F for pillar taps, cast copper alloy 15 mm bore, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs.

S&F for PVC connection 15 mm dia with PTMT nuts of length 450 mm.

Supply and fixing health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F for 60 cm long glass shelf assembly consisting of 5 mm thick glass shelf 12 cm wide with chromium plated bracket guards and railing screws as in repair complete all as specified

Supply and fixing for vitreous China wash down water closet pan including P or S trap (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet fixed as in repair complete all as specified

Supply and fixing for grating round 140 mm size of PTMT ( Minimum weight 50 gms ) with white cement or neat cement fixed in repairs complete all as specified and directed.

Supply and fixing for towel rail 600 mm long of Chromium plated fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed .

Supply and fixing for brass chromium plated soap dish fixed with chromium plated brass screws complete all as specified and directed.

Material and labour for 30 mm width of flap (when open ) continuous (piano ) hinges, mild steel , bright finished or electrogalvanised complete all as specified.

M&L for 18 mm thick UV board duly edge bonded with 0.8 mm thick PVC taping as in cupboard/Kitchen cabinet shutters fitting complete all as specified and directed.

Taking down existing cabinets/cupboards and Supply and fix Kitchen cabinet/cupboard made of HDR board 18 mm thick water proof and termite proof duly banded with PVC taping 0.80 mm thick cut to shape and size of shelves complete all as spd and directed. Make Action Tesa/Kitply/Archidian )

S & F for 40 mm dia cupboard knobs fixed with nut and screw and washer of mild steel bright finished complete all as spd and directed.

Supply and fixing for central hole basin mixer without popup waste system chromium plated , complete all as specified and directed.

Supply and fixing for bib cock with flange, chrome plated fixed as in repair complete all as specified and directed .

Supply and fixing for angular stop cock with wall flange chrome plated, fixed in repairs complete all as specified and directed.

Supply and fixing in repair Concealed stop cock, 15mm long shank and cup complete all as specified and directed.

Supply and fixing for towel ring Square, chrome plated,fixed in repairs complete all specified and directed.

Supply and fixing for toilet roll holder ,chrome plated fixed in repairs complete all as specified and directed.

Supply and fixing for corner glass shelf chrome plated fixed all specified and directed.

Supply and fixing for health faucet ,ABS SS braided hose 1mtr with IV hook complete all as specified and directed.

S & F for brass chromium plated shower rose 125 mm size.

S & F for 15 mm bore brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed.

S & F for 15 mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed.

S&F for 25 mm dia fancy type mild steel, chromium plated curtain rod fixed in position with fixing brackets , stops, rollers, etc. complete all as specified and directed.

M&L for cutting upto a depth of 15cm into concrete walls and trimmimg surface as required, girth exc. 30 cm and making good dismantled portion in PCC 1:2:4 type B-1, complete all as specified and directed.

Dismantling of cast iron or reinforced concrete soil waste and drain pipe, 75/100 mm dia, jointed in cement mortar or lead and taking out of trenches, if required.

M& L for cast iron (sand cast ) soil ,waste and vent pipe 100 mm dia in any length with or without ears fixed in walls with cement joint complete all as specified and directed.

M&L for cast iron (sand cast ) soil ,waste and vent pipe 75mm dia in any length with or without ears fixed in walls with cement joint complete all as specified and directed.

M & L for cast iron floor trap 75 mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4).

S&F for CI bends 100 mm bore (any radius), diminishing pieces or tapers.

S&F for CI bends 75 mm bore (any radius), diminishing pieces or tapers.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

M&L for providing precast reinforced cement concrete B1 1:2:4 as in landing, cover slabs and like, complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required incl crancking, bending spirally for hooping columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia.

M & L for preparation of old surfaces of ceilling and applying one coat of white wash .

M & L for preparation of old plastered surfaces of wall and applying one coat of white wash .

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash .

M&L for complete removal of existing treatment of walls and treating the surface with cement based putty (JK/Birala wall putty) to make surface smooth including two coats of distempering of wall with distemper oil emulison (any tint) complete all as specefied and directed. Make of paint : Asian Paint/ Berger Paint/ ICI India/ ECOPLUS

Complete removal of existing treatment of wall and applyng two coats of cement base paint complete all as specified and directed including curing before and after providing of each coat.

M&L for preparation of new plastered surface of wall and applyng two coats of cement base paint over a coat of alkalie resistance priming paint complete all as specified and directed .

M&L for 75 mm thick PCC as in plinth protection/apron type C-1, 1:3:6 (20 mm graded agg) finishing cement surfaces even and fair complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregates) as in copings, ,bed plates and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

S&F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.

S&F for mild steel angle or Tee section supports for shelves /water cooler etc and similar articles conforming to Fe-290 Gde E-165.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas, RCC chulha/chimany and similar suspended work (reinforcement cut as required to facilitate demolition).

M&L for 100 mm thick PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate) as in sub base of floor complete all as specfied and directed.

M&L for Non abrasive paving (Rectified Endura) cement concrete coloured tiles 300 x 300 x 10 mm thick set jointed & pointed in neat cement slurry 3 Kg per Sqm in floor mixed with pigments to match the colour as in pavements laid over and including 15 mm thick cement screed in CM 1:4 complete all as specified and directed.

S&F for PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to walls.

M&L for PVC (SWR) bends 110 mm, complete all as spd and directed.

Dismantling Brick tiles or terracing tiles, single layer on roofs including any treatment on roofs.

Demolition mud phuska in roofs any thickness incl platering and leeping(whether full thickness removed or only a part thereof) complete all as specified.

M&L for applying evenly a bitumen tach coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm incl cleaning surfaces complete all as specified.

M&L for Applying bitumenous primer @ 0.30 litre per sqm over cleaned and dry roof surface including parapet. (b) Material and labour for providing and laying 3mm thick APP modified polyester reinforced water proofing membrane with minimum weight of 3.60 kg/sqm , as specified. The APP membrane shall be laid using torch application with minimum 10 cm side overlap and 15 cm end overlap. The APP memberane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet. (Make of APP membrane as specified in Appx 'B').

M&L for 40mm thick brick tiles laid on 15mm thick screed bed in CM 1:6 , joints grouted flush in cement mortar (1:4) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

M&L for 40mm thick brick tiles laid on 15mm thick screed bed in CM 1:6 , joints grouted flush in cement mortar (1:4) mixed with 5% of crude oil by weight of cement complete all as specified and directed. but except tile including cleaning of tiles

M & L for rendering 5mm thick in cement mortar (1:4) on ceiling finished even & smooth without using extra cement.

BLANK

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed.

M&L for 4mm thick E Grid building board fixed to exposed metal frame ceiling with GI frame work grid 600 x600 GI frame of main runner 39 x24.7mm and wall angle 22.2 x22.2 mm incl hanger of 4mm dia gi bars hanger from purlin /rafter screwed with outer fly clip .

S&F for door closer hydraulically regulated cast iron body heavy duty universal type complete all as specified and directed.

Dismantling timber scantling 40 Sq.cm unframed work and over in sec in any position.

Dismantling Plain or corrugated steel sheeting/ AC sheet, any gauge, thickness, including Nainital or similar pattern roof covering including ridges complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. Note : Length of sheet shall be single piece only fixed.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 gde St -240 including one shop coat of primer complete all as specified.

M&L for Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate average thickness 50mm as in roof padding incl mixing water proofing compound (Dr. Fixit) or equivalent make specified in Appx 'B' as per manufacturers instruction complete all as specified and as directed. Note. water proofing liquid shall be measured and paid seperately)

Removal of surplus spoil to a distance exc 50 Mtr and n exc 100 Mtr and depositing where directed at a level n exc 1.5 Mtr above starting point in soil.

M&L for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165.

Taking down carefully point wiring of any type (i.e. on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, wooden batten, conduit etc. including accessories such as wooden gutties/rawal plug, screw etc including making good disturbed surface to match the existing surface.

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surface as per adjoining specification and terminated in concealed terminal boxes including MS concealed terminal boxes with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with washers,earth continuity PVC insulated cable copper conductor 1.5sqmm (nominal area)stranded as green colour as earth wire connected with earth dolly complete all as specified and as directed by Engr-in-Charge:-

One light point controlled by one switch

One fan point controlled by one switch

Socket point controlled by one independent switch board 3 pin 5 Amp

One socket point controlled by one the same board 3 pin 5 Amp with other switch

One call bell pint controlled by bell push.

One light point controlled by two way switches.

Ditto as per item No123 here in before but 3 pin 15 Amp socket outlet with 2.5 sqmm PVC insulated copper cable and 1.5 sqmm PVC insulated copper cable for continuous earth continuity conductor all as specified and directed.

S&F for switch piano flush type, 5 amps, 230V AC, single pole, one way.

S&F for switch piano flush type, 5 amps, 240V AC, single pole, two way

S&F for switch piano flush type, 15 amps, 230V AC, single pole, one way.

S&F for socket out let 5 amp 5 pin flush type.

S&F for socket out let 3 pin , 6 pin 15 Amp flush type.

S&F for ceiling rose surface type bakelite 65x50mm three terminal.

S&F for bell push switch flush type 5 Amps, SP 240 volts complete all as specified.

S&F for call bell, ding dong AC single phase, 230 volts including wooden/PVC board of suitable size, connecting & testing complete all as specified. Make for srl item No 125 to 132 : Havells (Reo)/SSK (Top line OR Touch)/Anchor (Penta).

Supply and fixing in replacement lamp holder include 9 W LED bulb insulated body with back plate for batten fittings.complet all as specified.

M & L for submain wiring two single core 6 sqmm PVC insulated copper FRLS drawn through PVC rigid concealed conduit and conduit accessories and 6.0 sqmm PVC insulated FRLS copper wire for continuous earth continuity conductor all as specified and directed. Including Taking down U/S submain wiring of any size and make. Note:-Three run of wire shall be measured in one unit.

M & L for PVC rigid non metallic conduit fire proof medium grade ISI Marked 25 mm dia including accessories such as junction box with covers,bend,tea etc and fixing material complete all as specified.

M & L for sheet metal for DB's with 200 Amp rated bus bar double door epoxy coated paint inside and outside 8 way all as per specified and directed.

M & L for MCB SP 6 to 32 Amp 10 KA.

M & L for MCB SPN 32 Amp 10 KA.

S & F in replacement Single pole & Neutral sheet metal enclosure with 2 pin plug top and earth plug socket complete with MCB SP & N upto 25 A 240 A.

Supply & fixing in repair energy saving tube light luminaries with diffuser LED with comprising with CRCA MS box and 4 feet 20 watt (min) retro fit tube rod having thermally conductive material Lumen output 2100 lumens (min) 6500 K, power factor more than 0.95, IP-20 class-I protection, with inbuilt LED driver, surge protection upto 2 KV, operative on 140 volts to 270 volts AC supply products must be made in India only.complete prewired, connection and testing complete all as specified and directed.

S&F for 9 watt decorative ultra slim square profile linear LED lighting fixture with extruded polycabonate environmental friendly enegy efficient including rod/tube and connection from ceiling rose to connector complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down existing light fittings all as specified & directed by Engineer-in- charge.

Supply & fixing for round shape 6 watt 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers,holders,LED lamp suitable for roof ceilling including connecting up with three core flexible copper conductor cable of suitable size complete.

Taking down and refixing geysers of any capacity or make, painting of geysers complete (as per previous colour), with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc including replacement of flexible wire, element, Assy, inner tank, nut bolts all as specified and directed.

Taking down and refixing ceiling Fan of any sweep or make, painting of fans complete (as per previous colour), with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc including replacement of flexible wire, rubber reel, nut, bolts all as specified and directed.

Supply & fix for fan 5 step regulator, electronic type, single phase, heavy duty incl connection complete after dismantling/removing unserviceable regulator all as directed.

S & F LED light fitting 1x9W / 1x 10 W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete.

M & L for energy saving & environmental friendly long life versatile pressure die-cast aluminium luminaries with high power 25 watt 5000 K LEDs Bldg security lights as light source and high efficiency electronic driver having IP 65protection (min),surge protection, power factor more than 0.9 complete pre-wired and product should be made in India Qty including bracket made out of GI pipe 32 mm dia bent to shape and clamp 40 x 6 mm with nuts and bolts.

Supply and laying of XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 16 Sqmm 4 core.

Excavation in trenches in soft/Loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out complete all as specified and directed by Engineer-in -Charge.

Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified.

Supply and old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-charge.(Considering 6per meter)

Returning ,filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer complete all as specified and directed by Engineer-in-Charge. (filling of trench from where LT cable taken &filling for new location of LT cable)

Removal of surplus soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.

M & L for replacement DB's 4 way TPN double door with bus bar of 200 Amps rated per fitted with MCB,and MCBs SP 6-32 Amps 10KA (as per site requirement) in outgoing circuits complete pre fitted and prewired with PVC insulated FRLS copper conductor wire of suitable size, with neutral bar and earth bar complete all as specified. Note: Srl item No 136 to 139 and 154 : Make: HPL/Schneider/ABB/Hager.

Supply and fixing for GI pipe light grade ISI Marked of size 40 mm dia bore for cable protection under road/floor along the pole including fittings complete all as specified and directed by Engr-in-Charge.

M& L for earthing complete with & including galvanized MS earth plate of size 600 x 600 x 6 mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level, with lop edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire soldered and riveted or connected to earth plate by means of nuts, bolts , check nuts & washers, of galvanized iron or steel all as Shown in electrical plate No. 3 of MES SSR Part- I (2009) and connected to panel board, all as specified and testing on completion including provn of earth wire 4 mmm dia duly protected with and including 15 mm dia bore medium grade GI pipe upto 7.5 (maximum) meter from electrode to earth point including provn of the earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate and GI light grade watering pipe of 20mm dia bore with funnel with wire mesh including all necessary excavation & earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth chamber, 50 mm thick RCC cover using cementconcrete 1:2:4 type B-0 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work and MS frame using MS angle of size 40mm x 40mm x 6mm complete all as specified & directed.

JAY ANN CONSTRUCTION COMPANY