Electrification of Kakkanad Shopping Complex and office building ,Fish Market under Thrikkakara Municipality

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. Single control light point with 3 plate ceiling rose

Single control light point without ceiling rose

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

Independent plug

Supply, conveyance, installation, testing and commissioning of pre-wired light fitting made of CRCA sheet of .5mm thickness complete with all accessories and lamps etc. directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required. S&F 1200 mm 20 W LED lamp

Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, epoxy powder coated, heat resistant prismatic glass cover suitable for 9 W CFL to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required.

Supply and fixing angle / straight brass lined skirt type, bakelite batten holder without shade and giving connection etc as required

Supply and providing the following types and power rated lamps in the existing fittings as required- 5/7 W LED bulb

Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.

Supply and providing every additional length of down rod of suitable size heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required.

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.- 1200 mm sweep (5star rated)

Supply, conveyance, installation, testing and commissioning wall mounting fan of the following sizes using mounting brackets supplied along with the fan and giving connection with existing wire. Charges for cutting holes suitable for accommodating exhaust fans of sizes exceeding 305 mm sweep up to 450 mm including plastering, colour washing etc. as required.

200 mm, single phase, light duty exhaust fan in plastic body with self opening louvers

380 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal frame

Supply , conveyance, erection testing and commissioning of Octagonal pole made of hot dip galvanisedGI sheet 70 mm top diameter, 130 mm bottom, sheet thiknes 3mm, base plate diamention of 200 x200 x 12 mm suitable for wind speed asper 875 part III, single arm bracket 0.5 meter including foundation bolt 4 nos fixed in existing RCC foundation and junction box etc complete. 5 meter

S&I of 12 V DC 3000 lm street light distribution min 175 lm/watts system efficiency 12 V 35 watts peak mono solar panel module capacity min 12% polycrystalline Lithium Ferro Phospate, LiFeP04 inbuilt solar cell 256 Wh integrated MPPT charger with Drive, < 90 % Charger and Driver efficiency having IP 65 protection, UV stabilaised polycarbonate cover typical 5700Kcolor temperature in built with PIR sensor switch for ON-OFF charging & Discharging LED indicator 0-15 degre adjustable Horizontal & Vertical pole mounting option etc inclusive of 5 years fully comprehensive maintenance guarantee for all the parts (BRP710 LED20 CW MR Solar Equip IN Sun Stay 3000 lm/equivalent)

supply,installation of 120 W LED Street light fitting with aluminium casting,toughed glass cover,assemetric beam angle of 130x50 degree with typical luminare efficiency >105 lumen per watt,IP 66 protection on existing GI pipe and giving connection..And including 3 years fully comprehensive guarenty (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

20 mm dia light gauge

25 mm dia light gauge

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

2.50 sq mm 3 run

2.50 sq mm 5 run

Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (ROHS)

3 module metal box in recess

Supply & Fixing the following types/ sizes of front plates on the existing modular boxes. (RoHS)

3 module white/ off-white

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (Group B)

16 A SP 1 way switch with indicator

6/16 A socket

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 2 core 4 sq mm with factory made clamp

2core 10sqmm

4 core 6 sq mm with factory made clamp

4 core 16 sq mm with factory made clamp

3.5 core 25 sq mm with factory made clamp

3.5c 95sqmm

3.5c 120sqmm

3.5c 240sqmm( 2 run x 240 sq mm)

Supplying siemens / tropodur type nickel plated Double compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable of the following sizes as required. 4 sq mm

Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required. 4sqmm-16 sq mm with 12 mm wide x 1 mm thick clip

25 sq - 95sq mm with 20 mm wide x 1.20 mm thick clip

Supplying and providing earth clamps made out of copper strips of the following sizes including cutting and bending the flat exactly to the shape of the gland, drilling necessary holes for nut & bolt, tinning the points of contacts and giving connections to the main earthing system as required. 20 x 3 mm for earthing glands of size 120 sq mm to 185 sq mm

25 x 3 mm for earthing glands of size 240 sq mm to 300 sq mm

Supply of superior quality aluminium tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required. 4 sq mm

Supply of superior quality aluminium in-line ferrules and making core termination of cables of the following sizes including crimping etc. as required. 240 sq mm

S&F water proof junction box 150x100x50 mm with locking type cover suitable for terminal box etc including providing 6 A SP MCB and 4 way PVC 15 A connector as required including terminations ( Sintex)

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required FP enclosure for independent mounting of MCB/ RCCB/ RCBO

12 way single phase double cover (IP 42/43) kitchan )

4 way (8+12) - three phase double cover (IP 42/43)

4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

6 way (8+18) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

16 A-100a, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required 40 A double pole mini break isolator

40 A, 2 pole, 30 mA RCCB

40 A four pole mini break isolator

40 A, 4 pole, 30 mA RCCB

63 A four pole mini break isolator

63 A, 4 pole, 100 mA RCCB

6 A to 25 A, 10 kA, TP MCB (C curve)

6 A to 32 A, 10 kA, SP MCB (D curve)

6-32A( C curve)

Supply and providing plate earthing as per IS 3043 with 600x600x6.30 mm GI/CI earth plate, 20 mm GI watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in ordinary rock - soft laterite soil)

Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection chamber of earth pit as required 300 x 300 x 6 mm cast iron gully trap with covering

Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required. 2 x 25 x 3 mm GI strip

Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required. 25 x 6 mm GI strip

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 2.00 mm copper conductor (14 SWG)( 4 SQ mm cable )

2.65 mm copper conductor (12 SWG)

3.15 mm copper conductor (10 SWG)

supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required. 2.00 mm (14 SWG)

2.65 mm (12 SWG)

3.15 mm copper conductor (10 SWG)

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 12 x 3 mm brass bolt & nut

25 x 6 mm brass bolt & nut

Supplying , threading , laying and jointing of the following sizes of 'B' class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads. 15 mm dia

Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.

Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using 1.60 mm CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments should be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. including control wiring

Supply and providing the following size of SMC sheets in the panel as barriers & shrouding using required bolts and nuts including cutting to shape etc., as required. 3 mm thick

Supply and fixing the following types of beeding along the periphery of doors/ other detachable compartments to make the panel assembly dust & vermin proof including sticking with glue 'A' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

Fabrication, supply, conveyance and installation of base frame for floor mounting type panel board using channel of class designation ISMC 75 including cutting, welding, drilling holes, painting with two coats of synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel and to the finished floor using required bolt and nuts, making good the damages etc. as required.

Fabrication, supply & fixing main bus bar system and interconnections with electrolytic grade copper strips/ rigid conductors conforming to IS 1867 (with latest amendments) for bus bar arrangement with single strip per phase supported on finger type bus bar supports of adequate size, spacing between supports not exceeding 50 cm & overhang not exceeding 5 cm including bending to shape, drilling holes, tinning the points of contacts, fixing heat shrinkable PVC sleeves, plated bolts and nuts with plate washers and spring washers, copper sockets for round conductors, etc., as required.

Fabrication, supply & fixing earth bus system with copper strip/ conductor and connecting all accessories as per rule including g tinning the points of contacts etc as required

LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour

Three phase multifunction meters to read V, A and F, accuracy class 1

100/ 5 A, 5 VA, 10 P 5, tape wound protection CT

S & F following HRC fuses

2 A-16A clip-on offset tag fuse link of size f1

Aluminium anodised Danger Notice Board of size 200 x 150 mm. with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red colour.

Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required 2.50 cm, 4 cm or 5 cm height

Aluminium anodised legend plate of size 100 x 40 mm. with inscription of BUS BAR CHAMBER .

Aluminium anodised legend plate of size 100 x 40 mm. with inscription of CABLE ALLEY.

Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 1.50 sq mm single run with required sockets.

2.50 sq mm single run with required sockets.

Rotary driving Kit including BUC handle with door interlock defeat & pad lock facility for MCCB rating of up to 250A

100/ 5 A, 5 VA, 10 P 5, tape wound protection CT

MSB - INCOMMER 400A A, 70 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with thermal setting of 50 - 100% having adjustable OL & SC

OUT GOINIG 100 A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

Rotary driving Kit including BUC handle with door interlock defeat & pad lock facility for MCCB rating up to 250A

Rotary driving Kit including BUC handle with door interlock defeat & pad lock facility for MCCB rating of 400A

SSB -INCOMMER ( 4 nos ) 160 A, AC 23 A, 4 pole on-load COS

160 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with thermal setting of 50 - 100% having adjustable OL & SC

16 A-100a, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

OUT GOINIG S & F switch disconnector fuse unit complete with handle assembly, door inter lock and padlocking arrangement of the following ratings: 32A DP SDF

32 A, AC 23 A, TPN SDF for DIN fuse

63 A, AC 23 A, 4 pole SDF for DIN fuse

100 A, AC 23 A, 4 pole SDF for DIN fuse

6 A-100A DIN type fuse link of size 00

(4.1.3)-Suppplying and installation of the following size of Perforated pre-painted MS Cable trays with perforation not more than 17.5 %, in convenient section, jointed with connectors, suspented from the ceiling with MS suspenders including bolt & nuts , painting suspenders etc as required 225 mm width x 50 mm depth x 1.6 mm thickness.

(4.1.4)-Suppplying and installation of the following size of Perforated pre-painted MS Cable trays with perforation not more than 17.5 %, in convenient section, jointed with connectors, suspented from the ceiling with MS suspenders including bolt & nuts , painting suspenders etc as required 300 mm width x 50 mm depth x 1.6 mm thickness.

(4.1.6)Suppplying and installation of the following size of Perforated pre-painted MS Cable trays with perforation not more than 17.5 %, in convenient section, jointed with connectors, suspented from the ceiling with MS suspenders including bolt & nuts , painting suspenders etc as required 450 mm width x 50 mm depth x 2 mm thickness.

Supplying and installation of supports, anchor bolts etc made out of suitable size single section channel etc as required including painting with 2 coats of synthetic enamel paint ( for support of Incoming cable.)

Fabrication, supply, conveyance and installation of angle iron frame work for wall mounting panel board using suitable size angle iron cut and welded to shape including painting with two coats of synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel using required bolt and nuts, fixing the whole to the wall, making good the damages etc. as required.

Supply and providing 2.5mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 11 KV dielectric strength.

Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required.

Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required.

Supply and clamping the following sizes of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 x 3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1m, making good the damages, colour washing etc. as required (for vertical run). 25 x 6 mm GI strip

Supply and clamping the following sizes of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 x 3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1m, making good the damages, colour washing etc. as required (for horizontal run). 25 x 6 mm GI strip

Charges for preparation of electrical scheme in A3 sheet first copy

Copying charges for additional A3 sheet

Delstar a Grade Electrical contractors

Kittu Electricals private limited

Power Care Electrical

PEE AR POWERON