Construction of working standard Laboratory for Legal Metrology District Budgam.

CIVIL & SANITARY WORKS

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soils

P/L dry Stone Soling duly hand packed & consolidated with hand rammers incl.all carriage leads and lifts complete Job.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size) PCC below Foundation& rooms-Mudmat including carriage.

Providing and laying in position specified grade of reinforced cement concrete, including curing but excluding the cost of centering, shuttering, finishing and reinforcement.- All work upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade M-15 excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centring and shuttering including strutting, propping etc and removal of form work:

Footings foundations, bases of column

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. TMT reinforcement of grade Fe-500D steel bars at all levels.

Supplying filling of watering compacting and dressing nallah muck under floors including all carriage lead lifts complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Brick work with FPS bricks of class designation 75 in upto floor V-level in cement mortar 1:4(1 cement : 4 coarse sand) etc complete job.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Kiln seasoned and chemically treated KD wood incl. all carriages leads and lift complete job

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, kiln dried imported/seasoned timber.35mm incl. all carriages leads and lift complete job

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Kiln seasoned & chemically treated imported wood incl. all carriages leads and lift complete job

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge of 35 mm kiln dried timber incl. all carriages leads and lift complete job

Providing and fixing with 3.5mm float glass including beading incl. all carriages leads and lift complete job

12 mm cement plaster on rough side of brick wall in1:4(1 cement : 4 fine sand mortar)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick incl. all carriages leads and lift complete job

Distempering with oil bound distemper of app brand and manufacture incl. all carriages leads and lift complete job

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)etc incl. all carriages leads and lift complete job

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works complete job (two coats) incl. all carriages leads and lift complete job

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood / steel works.

Cement concrete Flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) with 20mm nominal size stone aggregate etc.complete job

Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade incl. all carriages leads and lift complete job

VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm incl. all carriages leads and lift complete job

Structural steel work welded in built up section for trusses and framed work including cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer.including carriage

Providing / Fixing Corrugated G.S Sheet roofing incl vertical /curved surface galvanised iron 8mm dia with gi limpet sheets (size,shape and pitch of corrugation as approved by Engineer incharge)0.50mm (+0.05%) total coated thickness with zinc coating 120 garms per sqm as per IS:277, in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet etc. incl ridges and valleys

P/F of ridges 60cm wide of plain gs sheets 0.5mm fixed with polymer j or l hooks

Providing dash fasteners/ iron hold fast 40x5mm flat 40cm long including fixing to frame with 10mm diameter bolts,nuts and wooden plugs and embedding in cement concrete blocl 30x10x15cm in 1:3:6 mix. incl. all carriages leads and lift complete job

Providing and fixing of Hardware fittings (Alloy) as per approved samples incl. all carriages leads and lift complete job

100mm Handle

150 mm Handle

100mm Tower bolt

150mm Tower bolts

Stay hooks

L drop 10"

P/L of dry rubble masonry with hard stone in foundation and plinth incl. all carriages involved

Providing and fixing 3 layer PP-R (Poly propylene Random co polymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.

25 mm OD Pn20

40 mm OD Pn20

50 mm OD Pn20

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve approved quality conforming to IS : 8931

P/F CP long brass wall mixer of approved quality and make as approved by engineeh-in-charge 15mm dia

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level whiteP.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Range of two urinal basins with 5 literwhite P.V.C automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

P/F white vitreous china pedestal for wash basin complete rested at back for the reception of pipe and fittings

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510mm bowl depth 200mm

P/F Cp waste 32mm including waste pipe and all fixtures.

P/F 8mm dia C.P/S.S jet with flexible tube up to 1mter long with S.S triangular plate to European type W.C of approved quality and make.

P/F of 600 x 120x5 mm glass shelf with edges round of supported on anodised aluminium angle frame with C P Brass bracket and guard rail fixed with 40 mm long screws complete job

P/F soil, waste and vent pipes of medium Class

a)PVC S&S pipe (150mm dia)

a)PVC S&S pipe (100mm dia)

c)PVC S&S pipe (75mm dia)

Providing and fixing CP soap case of approved quality

Providing & fixing of 15mm dia PVC connection 600mm long including end union and washers complete.

Constructing brick masonry chamber for underground PIPES inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500x700 mm internal dimensions, total weight of cover with frame to be not less than 38 kg R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :.Inside dimensions as per requirement mm for single pipe line with one or two inlets

Hot water geyser of standard make 50 liter

Carriage of Stone agg For an average lead of 10 kms

Carriage of Bricks For an average lead of 05 kms

Carriage of Sand For an average lead of 25 kms

Electrification

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable of Polycab /Finolex /RR Kabels /Anchor /Salzer make to be approved by EIC before installation. in surface / recessed medium class PVC conduit (25 mm dia PVC Conduits including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job including cost of conduits and allied accessories like bends .lighting conceal deeps and fan deeps etc ) , with 6Amps modular switch, modular plate of Anti backteria series of Schneider /ABB /L&T /Legrand /Simens make , suitable GI box and earthing the point with 1.5 s q.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( P+N+E for Normal and invertor points per room is to be provided seperately).The Job further includes providing and fixing of heavy duty Metallic conceled deeps and Fan junction deeps of standard make dully isi marked (to be approved by EIC before installation) actual numbers to be provided as per site requirement and as per instructions of EIC complete job

Point wiring for 10 Amp Socket out lets with 3x2.5 sq mm (P+N+E) FRLs PVC insulated 660/1100 volt grade flexible stranded (50 strands of 0.25 mm dia.) copper conductor wires o

f Polycab/Finolex /Anchor/ RR Cabels /Salzer make to be approved by EIC before installation. , to be laid in recessed or surface conducting system (25 mm dia medium class PVC Conduits including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job including cost of conduits and its allied accessories ).The Job further Includes supply and fixing modular grid plate mounted flush mounted 2 no 240 volts 6-16 Amp 5 pin socket out let along with 2 No's of 6-16 Amp control Switch to be housed in 6-Way heavy duty GI Modular Box with modular cover plate of Anti fungal & Anti Bacterial of ABB /L&T / legrend /Simens make , complete as per specification and as required . The Job includes providing and laying of circuit wiring of same size from DB to first switch in sub circuit Complete as required Complete Job including conduits ,Switches ,Sockets and wires

Point wiring for 16 Amp Socket out lets with 3x4 sq mm (P+N+E) FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires of Polycab/Finolex/Anchor/RR Cabels /Salzer make to be approved by EIC before installation. , to be laid in recessed or surface conducting system (25 mm dia medium class PVC Conduits including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job including cost of conduits and its allied accessories ) .The job further includes the cost of supplying and fixing modular grid plate mounted flush mounted 240 volts 16 amp 6 pin combined shuttered socket out let along with 240 volt 16 Amp control Switch of Anti fungal & Anti Bacterial of ABB /L&T / legrend /Simens make to be housed in heavy duty 4-Modular GI Box of same make as of switches /sockets with p/f of modular cover plate , complete as per specification and as required with inter connection complete as per specifications and as required. The Job includes providing and laying of circuit wiring of same size from DB to first switch in sub circuit Complete as required Complete Job including conduits ,Switches ,Sockets and wires

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit (25 mm dia PVC Conduits for housing of upto 4 Sq.mm wires and 32 mm dia for housing of above 4 Sq.mm wires including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job ) as required. of Polycab / Finolex /Anchor / RR Kabels /Salzer make to be approved by EIC before installation. .

2 X 1.5 sq. mm +1 X1.5 sq. mm earth wire

2 X4 sq. mm + 1 X4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm +1 X 6 sq. mm earth wire

Supply and fixing of Indicators (Modular type) fitted on modular grid plate and GI Boxes complete job

Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supply and laying of 19-25 mm dia medium class PVC medium grade Conduit to be laid on surface with screws fixed in rowel plugs complete with all allied accrues like bends, tees etc. for paving way of laying of wires of haeting points /circuits ,machine points /circuits and sub mains .The Job includes cutting of walls with required hydraulic cutter and refacing of walls with cement plaster of required ratio or with P.O.P after laying of conduits refacing to its original position by way of supply and applying of painting of required colour to effected area's.Anchor/Polycab/Finolex/TMT Plus make.

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factornot less than 0.9, Service Value (CM/M/\N) minimum 6.00,Air deliveryminimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speedcontrol and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (ma><.), insulation resistancemore than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required.of Usha / Crompton Greaves / Orient /Helonix to be approved by EIC before installation.

Supply, Installation testing and commissioning of 250 mm sweep Exhaust Fans of Usha / Crompton Greaves / Orient /Helonix to be approved by EIC before installation. incl making of necessary connections and making of necessary space in walls / Windows as per site. The job includes provoding and fixing of hylum sheets to be fixed around exhaust fan (as per approved sample)

Supply, installation, Testing and Commissioning of 12 Watts, Surface/recessed LED Downlighter having aluminium Body (Commercial type) of standard make dully isi marked incl ceiling rose and 2-core transparent wire for connections complete job. The luminaire should have Back lit techanology and not side lit and should have a LEDs with colour consistency SDCM ≤ 5, CRI ≥ 80 and CCT of 6500K Luminaire shall be designed to emit initial system lumen output of 1400 lumens with minimum system efficacy of 120 lumen/watt. The luminaire shall comply to lifetime of 50000Hrs @ L70850 with design ambient temp 45°C. The electronic driver used shall have a power factor 20.95 and THD ≤10%, suitable for an operating voltage range of 140-270V AC, THD≤10%, Current Ripple 55%, Internal surge protection should be minimum 4KV, electrical insulation class should be Class I. The luminaire should be of Class B serviceability. The luminaire should be at least IP20 & IK02 rated. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322, "FAT" before dispatch as per IS 10322 & IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals: LM7

9 issued by NABL accredited lab, LM80 Issued by LED manufacturer, Type Test Certificate for luminaire as Issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver. Approved make Philips / Lighting techology/Trilux/wipro/Endo/Zumtobel Ligman (to be approved before installation) The Agency/firm has to submit Techanical data sheet (TDS) along with above mentioned requisite certificates before supply of materials for approval from department not less than

Supply, installation, Testing and Commissioning of 10-12 Watts, 2 ft long LED tube light fitting having PVC Body (Commercial type) of standard make dully isi marked incl ceiling rose and 2-core transparent wire for connections complete job. The luminaire should have a LEDs with colour consistency SDCM ≤5, CRI ≥ 80 and CCT of 6500K. Luminaire shall be designed to emit initial system lumen output of 1400 lumens with minimum system efficacy of 120 lumen/watt. The luminaire shall comply to lifetime of 50000Hrs @ L70850 with design ambient temp 45°C. The electronic driver used shall have a power factor 20.95 and THD $10%, suitable for an operating voltage range of 140-270V AC, THD≤10%. Current Ripple $5%, Internal surge protection should be minimum 4KV, electrical insulation class should be Class 1. The luminaire should be of Class B serviceability. The luminaire should be at least.17 IP20 & IK02 rated. The minimum dimensions of the batten shall be 44mm X 51mm X 1157mm. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have in-house NABL accredited lab to conduct LM79, Type test as per IS10322, "FAT" before dispatch as per IS 10322 & IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals: LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL agcredited lab, BIS certificate for LED Luminaire & Driver

Supply, installation, Testing and Commissioning of 10-12 Watts, 2 ft long LED tube light fitting having PVC Body (Commercial type) of standard make dully isi marked incl ceiling rose and 2-core transparent wire for connections complete job. The luminaire should have a LEDs with colour consistency SDCM ≤5, CRI ≥ 80 and CCT of 6500K. Luminaire shall be designed to emit initial system lumen output of 1400 lumens with minimum system efficacy of 120 lumen/watt. The luminaire shall comply to lifetime of 50000Hrs @ L70850 with design ambient temp 45°C. The electronic driver used shall have a power factor 20.95 and THD $10%, suitable for an operating voltage range of 140-270V AC, THD≤10%. Current Ripple $5%, Internal surge protection should be minimum 4KV, electrical insulation class should be Class 1. The luminaire should be of Class B serviceability. The luminaire should be at least 17 IP20 & IK02 rated. The minimum dimensions of the batten shall be 44mm X 51mm X 1157mm. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have in-house NABL accredited lab to conduct LM79, Type test as per IS10322, "FAT" before dispatch as per IS 10322 & IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals: LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL agcredited lab, BIS certificate for LED Luminaire & Driver Approved make Philips/Lighting techology/Trilux /wipro/Endo/Zumtobel/Ligman

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral 19 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) of Legrend /L&T/ABB/Simens/Schinder make dully isi marked complete with c

onnections of Legrend/L&T/ABB/Simens/Schinder make 4 way (4+12), Double door Separate for Heating and lighting

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of legrand/ABB/Schneider/L&T /Simens make

Supplying and fixing of 40 Amps rating DP 240/415 volts (10KA) of Legrend/L&T/ABB /Simens /Schinder make dully isi marked complete with connections of Legrand/ABB

Supplying and fixing of 63 Amps rating DP 240/415 volts (10KA) of Legrend/L&T/ABB Simens/Schinder make dully isi marked complete with connections

Supply, Laying, Testing & Commissioning of 50 sq.mm 3.5-core armored Al Cable XLPE/23 PVC Insulated and Steel sheathed of Havells/paramount make, including cost thimbles on input aswell as output sides dully crimped with hydraulic crimping tool inci making