Construction of 11 KV

Amount

Centralized Material

ST Poles 8.5M-IS 410 SP-23 (Bottom portion hot dip galvinaized)

Top channel 100*50*6

Bracing Set 65*65*6mm

Angle 75*75*6mm

V-Type cross arm 65*65*6mm 11KV

11KV Pilfer Resistance meter cubical

11KV Polymer Pin Insulator with pin

11KV Polymer Disc Insulator

11KV Disc fitting R/W 45KN

Stay Set 16*1800mm

Stay Wire GI 7/10swg

MS Earth Rods 20*2500mm

ACSR Rabbit Conductor

Earth Wire GI 16swg

Cable 3*120sqmm 11KV

TPMO Switch 400Amp 11KV

11KV VCB FDR 350/500MVA 400/200/5A, 110V AC

GI Wire 6swg for earthing & gaurdning

GI Wire 10swg for gaurding

De-Centralized Material

PP Clamp SP-23 with N&B

Stay Clamp with N&B SP-23

Earth Wire Clamp for SP-23 with N&B

Bracing holding clamp lower side SP-23

Bracing holding clamp upper side SP-23

PG Clamp

Stay Insulator

Labour

Safe cartage of following material from Store Centre New Tehri to work road side including loading & unloading at both ends. Distance 70 to 100Km.

ST Pole SP-23

Samll line material

11KV VCB FDR 350/500MVA 400/200/5A, 110V AC.

11KV Pilfer Resistant metering cubical.

Head load cartage of following material from road side to work site including proper stacking. Dist. about 0-3Km.

ST Pole SP-23

Samll line material

11KV VCB FDR 350/500MVA 400/200/5A, 110V AC.

11KV Pilfer Resistant metering cubical.

Excavation of earth for pole pit of size0.9*0.6*1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including getting out the excavation soil and disposal of surplus excavated soil as directed complete work.

Erection of following single support pole in proper level and alignment along with fixing of all accessories like top channel & clamp as per RESPO construction manual.

Erection of following double pole in proper level and alignment along with fixing of all accessories like top channel & clamp as per RESPO construction manual.

Erection of following four pole in proper level and alignment along with fixing of all accessories like top channel & clamp as per RESPO construction manual.

Grouting of pole in size 0.45*0.45*1/9 of the support in CC ration 1:4:8 block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment leveling as per respo construction manual.

Muffing of poles size 0.45*0.45*60cm ratio 1:3:6 block size 45cm height from ground level including cost of cement, sand, stone etc.

Digging of pit for new Stay size 0.6*0.6*1.5 mtr with nozelling and binding complete.

Earthing of support with connecting in GI wire 6swg.

Painting of poles with angle and channel and all steel parts by one coat of red oxide primer and two coats of aluminium paint and two strip of fluroscent altemate redand white paint 30cm wide upto 1.5mtr from ground level.

ST Pole SP-23

Fabrication of channel & angle on poles.

Stringing & sagging of 11KV 3Ph4W line conductor including jumpering and binding complete.

Eretion of fuse set complete.

Erection of GO Switch complete.

Erection of T-Off complete.

Complete erection and installation of 11KV VCB FDR 350/500MVA, 400, 200/5A 110V AC with earthing 35*6mm, earthing strip and connecting VCB with busbar and cable etc. with grouting and leveling of all accessories.

Installing of 11KV PRMC in control room with grouting & levelling with all accessories.

Laying & spreading of cable Al 3*20mm XLPE 11KV with cable jointing kit at both ends.

Erection of guarding on road.

Making of retaining wall and base for four pole structure after digging the earth of size 3*3*1mtr. including cement concreting in ratio 1:4:8 RR massonary work in 1:6 ratio and cement plaster on wall in 1:4 complete work with cost of all material.

Looping & chopping of trees falling in line.

M/s Jai Bhadraj Electricals

M/S RAJ SHREE ELECTRICALS