Providing and Fixing PCC poles and LED light fittings and dismantling of old steel structure under mine closure activity as required, at WCC UG mines, Dumanhill UG Mines, Pure Chirimiri UG Mines, Sonawani UG Mines and Korea UG Mines under Kurasia SA

Amount

Providing and Fixing PCC poles and LED light fittings and dismantling of old steel structure under Mine Closure activity at WCC UG mines, Kurasia SA.

Supply & erection pre-stressed cement (PSC) rectangular pole of top 105x115mm & bottom of 105x315m long (200kg) complete erected in provide CC Foundation & muffing (square/round) as per section no OHPL/PSC.

Providing of MS Angle bracket 50cm x 50mm x6mm each 65 cm long

M.S Flat for making D clamp (45 cm long 40/5)

Fabrication of street light bracket with straightening, cutting, bending, and welding complete.

Providing nut and bolt washer 50mm long 0.39 x10 Nos.

LED streetlight made up of pressure die cast housing with optics, IP66 protection and impact resistances 45 watts

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (4 x 4 sq. mm)

Supplying, installing, testing, and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required. (63 A TPN)

Providing and fixing 6 SWG dia. G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead for above ground work.

Transportation of scrap steel material from WCC to Regional Store, Chirimiri Area at surface

Providing and Fixing PCC poles and LED light fittings under Mine Closure activity at Dumanhill UG mines, Kurasia SA.

Supply & erection pre-stressed cement (PSC) rectangular pole of top 105x115mm & bottom of 105x315m long (200kg) complete erection in provide CC Foundation & muffing (square/round) as per section no OHPL/PSC

Providing of MS Angle bracket 50cm x 50mm x6mm each 65 cm long

M.S Flat for making D clamp (45 cm long 40/5)

Fabrication of street light bracket with straightening, cutting, bending, and welding complete.

Providing nut and bolt washer 50cm long 0.39 x12 Nos.

LED streetlight made up of pressure die cast housing with optics, IP66 protection and impact resistances 40 watts

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (4 x 4 sq. mm)

Supplying, installing, testing, and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required. (63 A)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Providing and Fixing PCC poles and LED light fittings with strip decorative LED lights (Tri-colour) under Mine Closure activity at Pure Chirimiri UG mines, Kurasia SA

Supply & erection pre-stressed cement (PSC) rectangular pole of top 105x115mm & bottom of 105x315m long (200kg) complete erected in provide CC Foundation & muffing (square/round) as per section no OHPL/PSC.

Providing of MS Angle bracket 50cm x 50mm x6mm each 65 cm long

M.S Flat for making D clamp (45 cm long 40/5)

Fabrication of street light bracket with straightening, cutting, bending, and welding complete.

Providing nut and bolt washer 50mm long 0.39 x 8 Nos.

LED streetlight made up of pressure die cast housing with optics, IP66 protection and impact resistances 40 watts

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (4 x 4 sq. mm)

Supplying, installing, testing, and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required. (63 A)

Providing and fixing 6 SWG dia. G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing and Fixing PCC poles and LED light fittings with strip decorative LED lights (Tri-colour) at Sonawani UG mines, Kurasia SA.

Supply & erection pre-stressed cement (PSC) rectangular pole of top 105x115mm & bottom of 105x315m long (200kg) complete erected in provide CC Foundation & muffing (square/round) as per section no OHPL/PSC.

Providing of MS Angle bracket 50cm x 50mm x6mm each 65 cm long

M.S Flat for making D clamp (45 cm long 40/5)

Fabrication of street light bracket with straightening, cutting, bending, and welding complete.

Providing nut and bolt washer 50mm long 0.39 x 8 Nos.

LED streetlight made up of pressure die cast housing with optics, IP66 protection and impact resistances 40 watts

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (4 x 4 sq. mm)

Supplying, installing, testing, and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required. (63 A)

Providing and fixing 6 SWG dia. G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing and Fixing PCC poles and LED light fittings with strip decorative LED lights (Tri-colour) and dismantling of old steel structure at Korea UG mines, Kurasia SA.

Supply & erection pre-stressed cement (PSC) rectangular pole of top 105x115mm & bottom of 105x315m long (200kg) complete erected in provide CC Foundation & muffing (square/round) as per section no OHPL/PSC.

Providing of MS Angle bracket 50cm x 50mm x6mm each 65 cm long

M.S Flat for making D clamp (45 cm long 40/5)

Fabrication of street light bracket with straightening, cutting, bending, and welding complete.

Providing nut and bolt washer 50mm long 0.39 x 8 Nos.

LED streetlight made up of pressure die cast housing with optics, IP66 protection and impact resistances 45 watts

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (4 x 4 sq. mm)

Supplying, installing, testing, and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required. (63 A)

Providing and fixing 6 SWG dia. G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead for above ground work.

Total impact of GST for the purpose of CTC