Improvements to maintenance facilities for various type of rolling stocks in coaching depot Jodhpur

A-ALL ITEMS OF CPWD-DSR-2021

B-ALL ITEMS USSOR 2021 Railway Formation works, Bridge work,&

C-ALL Non Schedule Items

Item Breakup - A-ALL ITEMS OF CPWD-DSR-2021

of 88 mm, weighing not less than 190 gms. 18.0 WATER SUPPLY 18.4S PP-R PIPES Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including 18.6 all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in- Charge. -External work 93 18.6.6 PN - 10 Pipe, 63 mm OD (SDR-11) Metre 1200 654.65 785580 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 18.8 fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 94 18.8.1 15 mm nominal dia Pipes Metre 120 441.15 52938 95 18.8.2 20 mm nominal dia Pipes Metre 120 513.75 61650 96 18.8.3 25 mm nominal dia Pipes Metre 75 626.05 46953.75 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This 18.9 includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work 97 18.9.1 15 mm nominal dia Pipes Metre 150 221.35 33202.5 98 18.9.2 20 mm nominal dia Pipes Metre 125 275.25 34406.25 99 18.9.3 25 mm nominal dia Pipes Metre 100 370.65 37065 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc.-External work 100 18.12.6 50 mm dia nominal bore Metre 1700 654.2 1112140 JODHPUR DIVISION-ENGINEERING/NORTH WESTERN RLY 101 18.12.8 80 mm dia nominal bore Metre 1200 919.1 1102920 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 102 18.13.1 25 to 40 mm nominal bore Each 4 757.1 3028.4 103 18.13.2 50 to 80 mm nominal bore Each 2 1513.7 3027.4 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 104 18.15.1 15 mm nominal bore Each 35 303.85 10634.75 Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 105 18.17.1 25 mm nominal bore Each 20 532.35 10647 106 18.17.4 50 mm nominal bore Each 2 878.25 1756.5 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber 18.31 insertions etc. (the tail pieces if required will be paid separately) : 18.31.1 100 mm diameter 107 18.31.1.2 Class II Each 15 4500.25 67503.75 18.31.3 150 mm diameter 108 18.31.3.2 Class II Each 15 6661.8 99927 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and 18.46 making long screws etc. complete (New work) : 109 18.46.6 50 mm nominal bore Each 2 706.7 1413.4 18.48 Providing and placing on terrace (at all floor Litre 20000 9.7 194000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 110 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 111 18.49.1 15 mm nominal bore Each 30 434.2 13026 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS 18.50 standards and weighing not less than 810 gms. 112 18.50.1 15 mm nominal bore Each 8 715.05 5720.4 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 113 18.52.1 15 mm nominal bore Each 25 594.75 14868.75 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 114 18.53.1 15mm nominal bore Each 25 500.35 12508.75 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, 18.59 rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 115 18.59.1 50 mm dia Each 15 5171.75 77576.25 JODHPUR DIVISION-ENGINEERING/NORTH WESTERN RLY 116 18.59.2 80 mm dia Each 15 6255.45 93831.75 117 18.59.3 100 mm dia Each 15 8214.1 123211.5 Providing and laying S&S Centrifugally Cast 18.72 (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 118 18.72.15 100 mm dia Ductile Iron Class K-9 pipes Metre 1200 1081.35 1297620 119 18.72.16 150 mm dia Ductile Iron Class K-9 pipes Metre 1200 1625.05 1950060 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture 19.1 of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 120 19.1.2 150 mm diameter Metre 800 591.4 473120 121 19.1.4 250 mm diameter Metre 800 1293.9 1035120 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone 19.2 aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 122 19.2.4 250 mm diameter S.W. pipe Metre 800 1476.35 1181080 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone 19.3 aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 123 19.3.2 150 mm diameter S.W. pipe Metre 800 689.75 551800 Providing and fixing in position pre-cast 19.19 R.C.C. manhole cover and frame of required shape and approved quality 19.19.4 EHD - 35 124 19.19.4.1 Circular shape 560 mm internal dia Each 60 1882.2 112932 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal 19.21 size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 125 19.21.1 For pipes 100 to 250 mm diameter Each 50 683.7 34185 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion JODHPUR DIVISION-ENGINEERING/NORTH WESTERN RLY 21.1.1.1 Anodised aluminium (anodised transparent or Kg 200 433.95 86790 126 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 180 531.8 95724 127 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 23.0 RAIN WATER HARVESTING & TUBEWELLS Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore 23.1 log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 23.1.1 All types of soil 128 23.1.1.1 300 mm dia Metre 90 592.05 53284.5 23.1.2 Rocky strata including Boulders 129 23.1.2.1 300 mm dia Metre 15 1416.3 21244.5 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore 23.2 log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 23.2.1 All types of soil 130 23.2.1.1 300 mm dia Metre 15 690.7 10360.5 23.6 Supplying, filling, spreading & leveling cum 6 1309 7854 gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of 131 boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 23.7 Supplying, filling, spreading & leveling coarse cum 4 1309 5236 sand of size range 1.5 mm to 2 mm in 132 recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 23.8 Gravel packing in tubewell construction in cum 3 1479.25 4437.75 accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required 133 grading & sizes as per actual requirement, all complete as per direction of Engineer-in- charge. JODHPUR DIVISION-ENGINEERING/NORTH WESTERN RLY Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including 23.10 painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in- charge. 23.10.3 200 mm nominal size dia having minimum Metre 80 2082.1 166568 134 wall thickness 5.40 mm Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, 23.11 having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 135 23.11.3 200 mm nominal size dia Metre 45 2194.85 98768.25 23.12 Development of tube well in accordance with Hour 12 916.8 11001.6 IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, 136 measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer- in-charge. Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of 23.14 tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 137 23.14.3 200 mm clamp Each 1 1827 1827 Total 56981686.81

Item Breakup - B-ALL ITEMS USSOR 2021 Railway Formation works, Bridge work,& P Way works

JCB Backhoe Loaders 3DX Plus or similar with Hour minimum 1.10 cum bucket capacity Total 51841.20