Tender for Selection of Agency for Development of Amritkal Garden/ Park along with the O & M for Three Years in Vastral Ward-East Zone

BILL OF QUANTITIES (B.O.Q.)

BILL OF QUANTITIES (B.O.Q.)

Name of the work: Tender for Selection of Agency for Development of Amritkal

Garden/ Park along with the O & M for Three Years in Vastral Ward-East Zone

Name of Contractor: _________________________.

Correspondence Address: ____________________.

Tender Amount: INR 16,29,67,595.93 /- including all cost and taxes excluding GST.

Contractor’s Quoted Rate: -

Net Tender Amount: INR ___________________/- including all cost and taxes excluding

Amount In Words: (Rupees__________________________only) including all cost and

taxes excluding GST.

<The quote to be submitted online only>

Seal and Signature of the Bidder:

DYMC (Parks & Garden), Ahmedabad Municipal Corporation

NAME OF PROJECT:-Development of Amritkal Garden

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

A Execution Cost of Park 147651250.88

Execution Cost of costructing

C Total Cost (P+Q+R+S) 162967595.93

NAME OF PROJECT:-Development of Amritkal Garden

SUMMARY- PARK EXECUTION

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

A Dismantling work- Site Clearence 86129.43

B Earthwork 1520567.16

C BASE COURSES 3902754.05

D RCC WORK 8175827.99

E Steel work 11939167.85

F Masonary work 5739360.34

Total Civil works 31363806.81

2 Land Scape - Hard Scape

G Floor finish 15497792.48

H KERBS & BOLLARDS 1265716.92

I DRAINAGE WORK 1847049.70

J MISC ITEMS 18825269.39

K Signages 276173.98

L Painting Works 158262.58

Hard Scape Total 37870265.06

Survey and Maintainence

M Maintanence for 3 years 0.00

N Site Survey 249243.75

Total Survey and Maintainence 249243.75

Total Cost (Civil Work, Hard

Scape & Survey / maintainence)

R Land Scape - Soft Scape 36763852

S Irrigation Work 5328248.55

T Electrical & Mech Works 36075834.71

U Total Cost (P+Q+R+S) 147651250.88

NAME OF PROJECT:- Development of Amritkal Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

A Dismantling work- Site Clearence

Clearing and grubbing road Land including uprooting rank vegetation grass bushes,

shrubs, sapling and trees girth upto 300mm removal of stumps of trees cut earlier

1 2.5 HECTARE 34451.77

and disposal of unserviceable materials (B) By mechanical means in area of thorny

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

2 useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose 3404.8 cum 115.92

Add extra for Disposing off the excavated stuff of above items for lead of (E) 400 to

Conveyance charge of earth, lime murrum building rubbish earth manure or

sludge & execavated rock and rubbish [Lime murrum building rubbish]

b) Lead up to 1.00 Km. 34.0 CUM 256.16

c) Lead up to 1.50 Km. 34.0 CUM 268.12

d) Lead up to 2.00 Km. 34.0 CUM 278.18

e) Lead up to 2.50 Km. 34.0 CUM 287.46

f) Lead up to 3.00 Km. 34.0 CUM 296.43

g) Lead up to 3.50 Km. 34.0 CUM 303.84

h) Lead up to 4.00 Km. 2860.1 CUM 312.45

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

5 foundations etc. in layers not exceeding 20 cm. in depth consolidating each 340.5 CUM 129.10

disposited layer by ramming and watering.

Suppliying of graded stone aggregate of following sizes (for W.B.M. Road) (1 Hand

broken stone aggregate 25mm to 90mm size.

Spreading the stone aggregate for rolling and W.B.M. including filling the interstice

7 store quired camber and gradient (excluding spreading of Blindage)(iii)25mm to 1229.4 CUM 247.28

50mm size crushed stone

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- hand

8 broken stone aggregates 40 mmnominal size) and curing complete excluding cost of 1107.4 CUM 2976.00

formwork in (A) Foundation and Plinth

Providing and laying in position Ready Mixed M-200 grade concrete for reinforced

cement conctere work , using cement content as per approved Design Mix

manufactured in fully automatic batching plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete

9 work including pumping of R.M.C. from transit mixer to site of laying, excluding the 839.7 CUM 4793.10

cost of centering shuttering finishing and reinforcement including cost of admixtures

in recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as per

direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest

IS 456 shall be maintained)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding

and placing in position complete upto floor two level

NAME OF PROJECT:- Development of Amritkal Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering

11 below supporting floor to ceiling not exceeding 4 M. and removal of the same for in 18.9 sqm 297.68

situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and

struts. (1) Square Rectangular Polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering

12 below supporting floor to ceiling not exceeding 4 M. and removal of the same for in 808.8 sqm 171.68

situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases

of Columns etc. and Mass concrete.

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering

below supporting floor to ceiling not exceeding 4 M. and removal of the same for in

situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits

of supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering

below supporting floor to ceiling not exceeding 4 M. and removal of the same for in

situ reinforced concrete and plain concrete work in.(H) Sides and soffits of Beams

Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in

Steel work, welded in built up sections framed work including cutting, hoisting, fixing

15 in position and applying a priming coat of red lead paint. (D) In trussses and trussed 31.2 q 8386.88

purlins, upto 25 M. span and 15 M. ovarall height.

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed with G.I. J or L

16 Hooks, Bolts and nuts glavanised iron J or L Hooks Bolts and nuts 8mm dia G.I. 393.0 sqm 1042.78

Limpet and bitumen washers complete.

Supply & Installation of MS CNC Laser Cut Panel of below mention thickness,

Aesthetic fixture made of MS, as per design & drawing given by architect. Item

include cost of ms sheet, cutting & installation on site. All work to be completed as

per instruction of Site in charge.

Providing & making Gabion structure with Mechanically Woven Double Twisted

Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause

2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of ± 2%) Zinc

coated, Mesh wire diameter 3.0 mm, mechanically edged/selvedged with partitions

at every 1m interval and shall have minimum 10 numbers of openings per meter of

mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @

3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm,

as per drawing, all complete as per direction of Engineer-in-charge

Providing and fixing post and pipe railing as per detailed drawing including 3 coats of

painting to steel works complete

Providing and fixing in position to exact profile high tensile steel wires of required

ultimate strength including bending, cutting, tying providing necessary standard and

anchorages, sheathing, stressing, grouting, ducts as per detailed drawing including

necessary plant and machinery complete. 12MM DIA

NAME OF PROJECT:- Development of Amritkal Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Providing and fixing S.S. ERW P hollow section of various thickness and sizes

in square, rectanular and round shape from 25mm to 450mm section including

frame of grade 304 pipes with braces of S.S. grade 304 and rectangular section

21 including cutting, organ welding, grading, making circustances polishing, buffing etc. 2909.0 KG 308.30

complete with necessary holes, nuts & bolts, caps & anchor plates of S.S. grade

ASTM as per drawing & instructionsof the Engineer-in-charge excluding the cost of

RCC/CC and earth work.

F Masonary work

Brick work using common burnt clay building bricks having crushing strength not

22 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 1167.7 cum 4345.02

5 -fine sand) (A) Modular

Providing 10mm thick cement plaster in single coat on brick/concrete walls for

23 interior plastering upto floor two level and finished even and smooth in (i)Cement 4350.0 sqm 127.58

mortar 1:3 (1-cement:3-sand)

White Stone Bela mesonry block in course in superstructure with stone of approved

24 quality in Lime Mortar 1:1.5 (1-Lime putty : 1.5- finesand) including packing the 25.8 CUM 4303.47

joints etc. complete.

Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36'' in flooring treads of

25 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3- 1350.0 SQM 1469.91

coarse sand ) finishing with flush pointing in white cement.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over and

jointed with grey cement slurry including rubbing and polishing etc. complete. (B)

River Washed kota - brown 2010.0 sqm 1085.48

Polished kota - Brown 810.0 sqm 1085.48

27 Extra labour for Chiselling in approved patterns and texts 5.0 Day 970.00

Providing and laying gang saw cut 30 mm thick, mirror polished / shot blasted pre

moulded and pre polished machine cut granite stone of required size and shape of

approved shade, colour and texture in footpath, flooring in road side plazas and

similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement :

coarse sand) including grouting the joints with white cement mixed with matching

pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.

16.87.1 With granite stone of colour black, cherry/ruby red of area less than

Providing and fixing 10x10x7.50 cm stone block hand cut and chisel dressed on top,

for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement :

coarse sand) with joints 10mm wide filled with same mortar including ruled pointing

etc. complete as per direction of engineer-in-charge.

Granite cobble 2800.0 Sqmt 722.81

Kota cobble brown colour 360.0 Sqmt 722.81

Providing and laying flamed/ lapato finish Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all complete as

per the architectural drawings with 18 mm thick stone slab over 20 mm (average)

thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with

cement slurry and pointing with white cement slurry admixed with pigment of

matching shade including rubbing, curing and polishing etc. all complete as

specified and as directed by the Engineer-in-Charge : Flamed / lapoto/shot blasted

finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in

footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,

thickness & size/ shape, made table vibratory method using PU mould, laid in

required colour & pattern over 20mm thick mortar, compacting and proper

embedding/laying of inter locking paver blocks into the sand bedding layer through

vibratory compaction by using plate vibrator, filling the joints with sand and cutting

of paver blocks as per required size and pattern, finishing and sweeping extra sand.

complete all as per direction of Engineer-in-Charge

80mm thick cement concrete paver block of M-35 grade with approved colour,

design & pattern.

NAME OF PROJECT:- Development of Amritkal Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

31.2 60MM THICK PAVER 1500.0 sqms 841.57

31.3 500X500X80MM TURF PAVER 700.0 sqms 1348.87

Providing and fixing acrylic plastic sheet panels of approved quality in required

thickness plain clear or any colour or obscured linings in lieu of glass pans to

doors/windows including providing and fixing clips, putty etc. complete. (b) 3.00 mm

Providing, laying, spreading fine sand of zone IV, complete as per specifications and

directions of Engineer-in-Charge.

Supplying, filling, spreading & leveling gravels/round pigmented pebbles of size

range 5 mm to 50 mm, in the recharge pit, over the existing layer of boulders, in

required thickness, for all leads & lifts, all complete as per direction of Engineer-in-

Supplying, filling, spreading & leveling stone boulders of size range 20 cm to 200cm,

35 in recharge pit, in the required thickness, for all leads & lifts, all complete as per 240.0 Cums 1336.90

direction of Engineer-in-charge.

Providing and laying rough chiseled dressed stone flooring over 20mm thick base of

36 cement mortar 1:5 (1-Cement : 5-coarse sand) or L.M. 1:1.5 including pointing with 500.0 Sqms 610.15

cement mortar 1:2 (1- cement : 2-stone dust) etc. complete. (B) 40mm thick

Supplying, filling, spreading & leveling crushed stone aggregate (bajri) hard quality of

37 size range 10 mm to 20 mm, in place, for all leads & lifts, all complete as per 225.0 CUMS 784.63

direction of Engineer-in-charge.

Supply providing and fixing of 30mm thick EPDM flooring of approved colour and

pattern complete as per the drwaings and the directions of engineer in charge

Supplying & laying of bi-axial extruded high modulus polypropylene geogrid

coforming to MORTH SPECIFICATION for base/sub-base reinforcement having

minimum tensile strength 15kN/m in the longitudinal and transverse direction, with

5kN/m and 7kN/m tensile strength at 2% and 5% strain respectively in the

longitudinal and transverse direction, junction efficiency not less than 95% and with

38mm X 38mm mesh opening.

Supplying, filling, spreading & leveling murrum, in required thickness, for all leads &

lifts, all complete as per direction of Engineer-in-charge.

H KERBS & BOLLARDS

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete

block 30cm length,30cm height and 15cm thick of M250 grade concret as per

approved design and including excavation for fixing in proper line and level,filling the

joint with C:M 1:3 (1cement:3fine sand) etc complete.

Precasting and placing in position Bollards of required shape and size including

providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes

mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and

42 embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) 50.0 Each 2398.50

derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived

from natural sources), including necessary excavation of size 250x250x450mm

deep for the same in bitumen/concrete pavement at specified spacing.

I DRAINAGE WORK

Supplying & laying of drainage composite for use behind walls, between two

different fills, alongside drains of road, below concrete lining of canals etc. having

thermobonding a draining core - comprises of a nonwoven geotextile having mass

per unit area 130 gsm and tensile strength of 8.0 kN/m that will be working as

43 separation or protecting layer, geocomposite having in plane flow capacity of 0.7 L / 3200.0 Sqms 350.00

(m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of

kN/m , with mass per unit area of 830 gsm, at easily accessible location including

top and bottom, with all leads and lifts, manpower and machinery, materials, labour

etc. complete and as directed by Engineer - In - Charge.

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt

ends prepared for collar joints

including testing of joints complete.(B) 150mm

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm

including 500mm x 450mm C.I. horizontal grating wih frame complete.

NAME OF PROJECT:- Development of Amritkal Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

46 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone 30.0 EACH 7109.35

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(iii) Inside dimensions

600mm x 850 mm and 450mm deep for pipe lines with three or more inlets.

Supply Providing and fixing corten steel sheets in place complete as per the

drawings and the directions of engineer in charge

Providing erecting and fixing double coated ISI-FRP water tank of required capacity

each with all necessary fittings and connection etc. complete on terrace

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- hand

broken stone aggregates 40 mmnominal size) and curing complete including

providinh wood finish to the exposed surface for flooring / Elemental work complete

as per drawings and the directions of engineer in charge

Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm

x 19mm for stiles and 15mm x 15 mm for top and bottom rails. M.S. frame shall have

a coat of steel primers of approved make and manufacture, M.S. frame shall be

covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x 50 mm forming

stiles, and 5mm thick 75mm wide PVC sheets for top rail, lock rail and bottom rail on

either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert

for top rail and bottom rail, Panelling of 5 stiles and rails with 30mm wide x 5mm

thick PVC sheet beading on eighter side, and joined together with solvent cement

adhesive,. An additional 5mm thick PVC strip of 20mm width is to be stculk on the

interior side of the ‘c’ channel using PVC solvent cement adhesive etc. complete as

per direction of Engineer in charge, manufacture’s specification and drawing.

Providing and fixing window having extruded aluminum Colour anodized section

frame main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal

Four track member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical

member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters

51 of horizontal member size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member 67.5 sqm 2119.14

of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc complete for

Providing wood work in frames of Doors, windows cleare story windows and

othersimilar works wrought, framede and fixed in position. (A) Indian Teak Wood

Supply & fixing in place of Asbestoes rope of specified dia as per the drawing and the

directions of engineer in charge

Providing and fixing SS DOUBLE POLE 14X24 INCH GRADE 202, WEIGHT 13.000 KG

APPROX. CAPACITY 40+40 LTR OPEN TYPE SHEET THICKNESS 0.5 mm APPROX.

Supply providing and fixing of IPE Wood flooring made up of teak wood, complete

55 work in cluding T&P and materials complete work as per the drawings and the 157.5 SQM 6310.30

directions of engineer in charge.

Supply & Installation of 5 mm clear toughend glass + 1.52 clear PVB layer + 5 mm

56 clear toughend glasss per design & drawing given by architect.(Including shades 857.5 sqms 1459.62

prints , letters etc.)

Design, Supply, Fabrication and Installation of Membrane Panels. Fabric Makes-

Serge Ferrari/Verseidag or Equivalent. Membrane shall be High Tenacity Polyester

1100 Dtex. multifilament Polyester with minimum Weight of 460 g/m2. The Fabric

should have 0% openness -porosity for Maximum Light Visibility with minimum

Tensile Strength (Warp/Weft) - 3000/ 3000 N/5cm, minimum Tear Strength (Warp/

Weft)-700/700 N/5 cm. Fabric Flame Retardancy Rating to be Euro Class - Bs2, do,

57 Micro Organism Resistance and Warranty of 10 years. The design complies with the 800.0 SQM 5700.00

requirements of BS and, EU Standards. The tensioned membrane structure shall

include engineering design of structural members and accessory parts. Membrane

system shall include PVC/ PVDF coated Membrane Fabric, Wire Ropes and Cables,

Shackles, Rigging Screws, Clamps and tensioning hardware as per specification,

drawings and engineers approval. Vendor to provide OEM certificate

for authorization.

NAME OF PROJECT:- Development of Amritkal Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Supply Providing & Installation of Frp Sheets of required texture and shape as per the

58 drawings including all the necessary tools, clamps, accessiories etc complete work 431.4 sqm 923.48

per design & drawing given by architect & directtions of engineer in charge

Providing and fixing of FLOATING DECK OF size mentioned as per spec.

59 made up of HDPE material with quality cerificate including test for seepage 150.0 Sqms 10599.85

and floating etc as per drawings and directions of engineer incharge

Supply & Installation of Stainless Steel Sheet Panel of 6mm thickness, Aesthetic

fixture made of SS, as per design & drawing given by architect. Item include cost of

SS sheet, cutting & installation on site. All work to be completed as per instruction of

Site in charge.

Supply providing and fixing in place wheel stoppers made of rubber having load

61 carrying capacity of 1Ton minimum with reflective strips Complete as per 50.0 Each 3000

drawings and the directions of Engineer in charge

Supply and fixing of 10mm multiwall clear Polycarbonate sheet, aluminium profile,

aluminium L Angle, Screws, Sealants and fixing accessories

Making in situ wooden deck with WPC flooring made up of teak wood,

63 complete work in cluding T&P and materials complete work as per the drawings 150.0 SQM 3930.90

and the directions of engineer in charge.

Providing and fixing S.S. Plates for signages of various thickness and sizes in

square, rectanular and round shape, section including frame of grade 304 with

braces of S.S. grade 304 and rectangular section including cutting, organ welding,

64 grading, making circustances polishing, etching letters buffing etc. complete with 378.0 KG/SQM 366.33

necessary holes, nuts & bolts, caps & anchor plates of S.S. grade 304 ASTM as per

drawing & instructions of the Engineer-in-charge excluding the cost of RCC/CC and

Supply , Providing, Fixing of signages made of wodden planks with etching of words

65 as per drwaings and complete fixings usings nails, adhesive etc as per the directions 90.0 Sqms 1530.00

of engineer in charge

L Painting works

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt,

dust and other foreign matter.

White washing with lime on wall surface (two coats) to give an even shade

67 including thoroughly booming the surface to remove all dirt, dust; 2273.0 sqm 12.29

mortar drops and other foreign matter.

M Maintencence Work

Carrying operation and maintanence work including necesaary repairs, cleaning

68 and and replacement of dameged items / materials for 5 years under DLP as per 0.0 Months 158360.00

the directions of engineer in charge (for garden and commercial area).

Contour surveywork for prepaing contourmaps by taking cross-section at

every 30M. intervals including all, labour materials and instruments.

Surveying for site works including ranging, chaining, pegging leveling and

70 compass surveying including all labour materials and instruments 75.0 Km 3046.05

NAME OF PROJECT:-Development of Amritkal Garden

SUMMARY- Cost of costructing GFRC monuments

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

A Earthwork 93879.93

B BASE COURSES 278348.16

C RCC WORK 4040062.86

D Steel work 1636449.58

E Masonary work 102344.68

F GFRC works 9165259.86

G Maintanence for 3 years 0.00

H Civil Works 15316345.06

I Total Cost (P+Q+R+S) 15316345.06

Development of Amritkal Graden - GFRC Monuments

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Excavation for foundation upto 1.5 m depth including sorting out

1 and stacking of useful materials and disposing off the excavated 384.9 cum 115.92

stuff upto 50 Meter lead.(A) Loose or soft soil

Add extra for Disposing off the excavated stuff of above items for

lead of (E) 400 to 500 m

Suppliying of graded stone aggregate of following sizes (for

3 W.B.M. Road) (1 Hand broken stone aggregate 25mm to 90mm 80.2 CUM 246.53

Spreading the stone aggregate for rolling and W.B.M. including

4 filling the interstice store quired camber and gradient (excluding 80.2 CUM 247.28

spreading of Blindage)(iii)25mm to 50mm size crushed stone

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

coarse sand : 6- hand broken stone aggregates 40 mmnominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and laying in position Ready Mixed M-200 grade

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C.

from transit mixer to site of laying, excluding the cost of centering

shuttering finishing and reinforcement including cost of

admixtures in recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve workability

without impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained)

Providing TMT Bar FE 500D reinforcement for R.C.C. work

7 including bending, binding and placing in position complete upto 30579.7 kg 75.46

floor two level

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and propping

etc. height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (G) Columns

PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint. (D) In trussses and trussed purlins, upto 25 M.

span and 15 M. ovarall height.

Providing and fixing post and pipe railing as per detailed drawing

including 3 coats of painting to steel works complete

E Masonary work

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (i)Cement mortar 1:3 (1-

Supply Providing and erecting of standard quality GFRC (Glass

Fiber Reinforced Concrete) pannels in walls,elemental works,

scluptures etc in all floors using suitable crane as per

instructions of Engineer in charge, as per cutting drawings and

structural drawings in perfect line and plumb above RCC Plinth

beam / GFRC pannel below and provide necessary lateral /

12 slanting support to keep wall panner in safe position and tieng 5053.2 sqm 1813.75

reinforcement as per structural drawings and applying a coat of

water reppelent coating Zycosil / equivalent product (1 part

compound and 1 parts water). Rate include provision of linters,

beams, sunshades, starircase beams lofts, plumbing work,

electrical conduits and any other structural insertion etc. as per

the drawings and direction of engineer in charge.

M Maintencence Work

Carrying operation and maintanence work including necesaary

repairs, cleaning and and replacement of dameged items /

materials for 5 years under DLP as per the directions of

engineer in charge (for garden and commercial area).

Total For Monuments Area

Project Name : AMRITKAL PARK

Location : AHMEDABAD

ESTIMATION FOR LANDSCAPE AUTOMATIC IRRIGATION SYSTEM

I Manual Irrigation Works

S.No Description Units Qty Amount

Installation Rates

Pipes Work: Supply, laying & commissioning in position PVC pipe conforming to IS:4985:2000 and suitable for

the respective working pressures without all fittings and accessories e.g. couplings, tees, bends, reducers,

screwed adapters, flanged tail pieces etc., complete, as per the instructions of Architect/Landscape

Architect/Engineer In Charge.

1.01 PVC pipe 75mm-10 kg/cm² - Mainline Rm 726.00 332.00

1.02 PVC pipe 63mm-6 kg/cm² Rm 216.00 167.57

1.03 PVC pipe 50mm-6 kg/cm² Rm 876.00 104.50

1.04 PVC pipe 40mm-6 kg/cm² Rm 2,298.00 92.50

1.05 PVC pipe 25mm-10 kg/cm² Rm 12.00 61.25

1.06 PVC pipe 20mm-10 kg/cm² Rm 12.00 39.50

1.07 PVC fittings LS -

1.08 Earth work excavation and refilling 300x450mm Rm 4,116.00 90.00

1.09 Hume Pipe for road crossing 6" Dia Rm RO

1.1 MS Pipe - B class for road crossing 4" Dia - B Class Rm RO

1.11 Core cutting in concrete slab/brick wall for pipe routing Up 63 to 110 mm dia Nos RO

1.12 Chipping in Brick or Concrete for Main and Lateral lines Rm RO

2.00 DRIP & ACCESSORIES

Supply, Fixing & Commissioning of flexible 16mm inline tubing PC Drippers with pressure compensating,

self flushing mechanism, resistance to UV damage, algae growth brown in colour, Longer lateral run lengh

with flow rate 2lph / 4.0 lph, pressure rating 0.58 to 4 bar , Dripper Spacing at 30 cm / 45 cm Spacing wall

2.01 thickness 1.1mm to 1.2mm etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In

Charge.With all fittings

Supply, Fixing & Commissioning of 1" High Flow Inline Pressure Regulators High Flow Inline Pressure

Regulators provide a wider flow range (0.5 gpm to 70 gpm) while delivering reliable pre-set pressure regulation

protecting the integrity of irrigation systems. , 0.5 gpm (1.9 l/min) to 35 gpm (132.5 l/min) , Regulated

Pressure : 40 psi (2.75 bar) , Operating Pressure: 15 psi (1.0 bar) to 150 psi (10.3 bar)

Supply, Fixing & Commissioning of 1.5" High Flow Inline Pressure Regulators High Flow Inline Pressure

Regulators provide a wider flow range (0.5 gpm to 70 gpm) while delivering reliable pre-set pressure regulation

2.03 protecting the integrity of irrigation systems.Flow 15 gpm (56.8 l/min) to 70 gpm (265.0 l/min) , Regulated

Pressure : 50 psi (3.44 bar) , Operating Pressure: 15 psi (1.0 bar) to 150 psi (10.3 bar)

Supply,Fixing & commissioning of 2" Large Capacity Y Type Disc / Screen Filters for submain filteration Have

High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25m³/hr), Maximum Pressure

116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of

Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 1.5" Large Capacity Y Type Disc / Screen Filters for submain filteration

Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 88 gpm (15m³/hr), Maximum

2.05 Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of

Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 1" Large Capacity Y Type Disc / Screen Filters for submain filteration Have

High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 26 gpm (6m³/hr), Maximum Pressure

116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of

2.06 Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 40mm dia self-closing flushing valves that are installed at the end of the

irrigation line for effecting flushing of the line at the beginning of every irrigation cycle, thus avoiding the

clogging of the emitters /sprinklers through removal of particles, sediments and other impurities from the water.

2.07 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 9 - Gauge Galvanized Steel Rod Comes Sharp tips provide easy insertion

into all soil types, Staple Distribution Tubing , XF Drip Line or XBS Tubing to Finished Grade. Notched Sides.

Corrosion -Resistant of TIE DOWN STAKE etc., complete, as per the instructions of Architect/Landscape

2.08 Architect/Engineer In Charge.

3.00 SPRINKLERS & ACCESSORIES

Supply,Fixing & commissioning of Pop up spray head1804 SAM PRS Series Spray bodies, with Rotary

nozzle having mutilple stream MPR sprayhaving Co-moulded wiper seal is molded into the cap and features an

encased plastic 'cage' to provide unmatched resitence to grit, nozzle having capable of covering 2.4m -7.3m

at 1.4 - 3.8 Bars pressure, True flushing mechanism,Thick streams and large water droplet & Low

precipitation rate and the enviroment. Additionally, the pressure-activated, multi-function seal design assures

a positive seal without excess'flow-by'which enables more heads to be installed on the same valve, Two-piece

3.01 ratchet mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of

time-proven UV_resitant plastic. Pop spray body shall with stand upto 4.8 bar. Built-in Seal-A-Matic™ (SAM)

check valve. Traps water in lateral pipes in elevation changes of up to 14 feet (4.2 m). PRS Maintains

constant outlet pressure at 30 psi or 45 psi at varying inlet pressures.etc., complete, as per the instructions

of Architect/Landscape Architect/Engineer In Charge. 1804 SAM PRS R1724

Supply,Fixing & commissioning of 5004 PLUS SAM PRS Series Rotor pop up sprinkler full/part circle having

radius of 6.7m - 12m @ 2.5 - 4.5 bar with discharge of 0.09 - 0.61 ltr./sec. the sprinklers having Arc Adjust

thru Top Cover w/ Std. Screwdriver The sprinkler is gear driven rotary type with having 3/4" bottom inlet.

Oversized wiper seal, Rain Curtain technology, gentle close-in watering and Self-flushing arc adjustment port

and also having tapered riser stem with Wiper Seal The sprinkler shall have Plus (PL) Flow shut off, 45 psi

3.02 pressure regulator with flow optimizer technology, internal Seal - A - Matic device which prevents low

head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler is of non - corrodible, heavy

duty, ABS plastic.O-ring Slip Clutch,Racheting Slip Clutch,Side Inlet Available 6" and 12",Turret-mounted ID

Plugs,Flow Stop Available,Non-potable water indication available etc., complete, as per the instructions of

Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 1/2" Pop up Connecting Swing joint Assembly , 12" Length . The tubing

shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a

surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant

thermo plastic etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge..SA

Supply,Fixing & commissioning of 3/4" Pop up Connecting Swing joint Assembly. The tubing shall be made

of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure

3.04 of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant thermo plastic

etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge..SA Series.

Supply,Fixing & commissioning of Imported HDPE service saddle of varying size (40mm,50mm & 63mm

3.05 dia) with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape

Architect/Engineer In Charge. Nos 650.00 200.00

4.00 VALVES & ACCESSORIES

Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in

space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals

4.01 and with a base which permits maximum penetration into the valve of size 63mm with pressure rating PN

etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double

water tight joint,direct injection stem, Stem O-Ring, non mechanical ,ball Seals with backing seals and a base

which permits maximum penetration into the valve of size 50mm. with pressure rating PN 10 etc., complete,

as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double

water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a

base which permits maximum penetration into the valve of size 40mm. with pressure rating PN 10 etc.,

complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of a double acting air and vaccum release 1/2 " Air release valve . The Air

release valve shall be capable of both releasing and admitting air from and into the line. The working pressure

shall be 5 bar. Only for Drip Irrigation etc., complete, as per the instructions of Architect/Landscape

Architect/Engineer In Charge.

Supply,Fixing & commissioning of a double acting air and vaccum release 2 " Air release valve . The Air

release valve shall be capable of both releasing and admitting air from and into the line. The working pressure

4.05 shall be 10 KSC etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In

Supply,Fixing & commissioning of 6"Round box with greenlid with features Snap-in overlapping lid, Skid-

resistant lid texture,, Body built with three ridges for additional support to sidewallst & Having Dimensions @

Top Opening :6 1/8" Dia & Bottom Opening 8 5/8" Dia etc., complete, as per the instructions of

Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 10" Round Valve Box with greenlid with features of Overlapping lid with

bolt hole and twist lock, Skid-resistant lid texture, Body built with double ridges for additional sidewall support

& Having Dimensions @ Top Opening 10" Dia & Bottom Opening 12 13/16" Dia etc., complete, as per the

instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 12" Rectangular Standard Valve Box features, Drop-in lockable lid, Skid-

resistant lid texture, Double ledge lid support, Ridge adds additional support to sidewalls & having Dimensions

@ TTop Opening: 15" L x 9 ½" W Bottom Opening: 18" L x 12 ½" W x 10" H etc., complete, as per the

4.08 instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 18'' Jumbo Rectangular Standard Valve Box with greenlid and corrugated

structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L

X 13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H etc., complete, as per the instructions of

4.09 Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 3/4th inch Quick coupling valve made up of solid brass with locking

cover corrosion resistant and stainless steel spring etc., complete, as per the instructions of Architect/Landscape

4.1 Architect/Engineer In Charge.

Supply,Fixing & commissioning of 3/4th inch Key threads into top of QCV to provide water access etc.,

complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 3/4th inch Hose Swivel Made up of Solid Brass Swivels up to 360 degrees

to allows hose to be pulled in any direction & Also to prevent Hose Damage etc., complete, as per the

4.12 instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of Imported HDPE service saddle of varying size (75mm to 110mm dia)

with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer

4.13 In Charge.

5.00 FILTRATION UNIT

Supply,Fixing & commissioning of 2.5" Disc Filter with capacity 40m3/Hr having an suitable inlet connections

, to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering

element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working

5.01 pressure of 10 Bars etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of Pressure Gauge 2" dial With glycerine filled complete, as per the

instructions of Architect/Landscape Architect/Engineer In Charge.

6.00 PUMPING UNIT

Supply,Fixing & commissioning of Monobloc pumpset of having discharge and head of design flow , UPVC

sch 40 - suction & delivery manifold and mounted on a baseframe with proper supports etc., complete, as per

the instructions of Architect/Landscape Architect/Engineer In Charge.

Duty of Pump : 4.50 LPS

Pressure Head Range = 50 - 55 Mtr

No. of Pumps : 1 Working + 0 Standby Nos 1.00 69,000.00

Supply,Fixing & commissioning of suitable control panel (Star Delta)for pumpset with inbuilt irrigation

controller pump start relay & having the Key features , Manual Mode : Push button On / Off Control ,rugged

standard 1.6 mm thickness dust & vermin proof enclosure , high voltage proetction, over load & dry run

protetcion fuse protectionfor controller to pump enable signal , 8 PIN control relay instead of slim relay

6.02 terminal with clamp & sufficient access space , wall mounting clamp provision, digital pump control with

external CT , siemens & switch gears, quality proven products with long life assurance., etc., complete, as per

the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply ,Fixing & Commissioning of Control Cable for Pump Set - 3 core X 4 / 6 Sq.mm Copper cable based on

the pump capacity

Supply,Fixing & commissioning of 2.5'' control Valve, Butterfly Valve VAN Stone flange & Tail Piece in

mainline for bypass and flow diversion of approved quality with pressure rating of PN 10 etc., complete, as per

the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 2.5'' Non Return Valve to prevent back flow have flap type or spring type

with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In

Supply,Fixing & commissioning of Pressure release valve 2" with pressure setting from 0 to 7 Bar etc.,

complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of Ø50-2" Watermeter - ISO PN 10 - GG 25 etc., complete, as per the

instructions of Architect/Landscape Architect/Engineer In Charge.

7.00 Automation Equipments

Supply,Fixing & Commissioning of 14 Awg x 2 Maxi Jackated Direct Burrial Irrigation Automation Cable.

Tin coated copper conductors, insulated with PVC and having a high density polyethylene direct burial jacket.

Conductor - Soft annealed tin coated solid copper conforming to ASTM B-33. Insulation: Polyvinyl Chloride

7.01 conforming to UL Standard 493 for TYPE UF/TWU rated 75°C. Outer Jacket: Pressure Extruded High Density PE

conforming to ICEA S-61-402, and NEMA WC5 Jacket Thickness 3/64" minimum jacket material to completely fill

interstices between the two insulated conductors for two way communication between decoder controller and

decoders complete , RAINBIRD PAIGE OR XERITECH

Supply,Fixing & Commissioning of 25mm PVC Conduit pipe (3/4'') including fittings and accessories

Supply,Fixing & commissioning Of Two wire control system without Decoder

ESP-LX IVM 230V Input, DC output Irrigation Controller having Two way Communication between

controller and smart valve,supports up to 60 stations standard Up to four 2-Wire paths, plus flow sensing and

advanced flow management tools. supports upto 5 flow sensor inputs and removable front panel is

programmable under battery power. water management features like: • Learn Flow utility and fl ow usage

totalizer help optimize water usage, • FloWatch™ protection for high and low flow conditions , FloManager™

manages hydraulic demand, make full use of available water to turn on as many stations as possible without

7.03 exceeding water supply and reducing the total time to complete irrigation cycles. SimulStations™ allows

stations to operate at the same time; up to 8 with LX-IVM • Cycle+Soak™ by station, • Rain Delay up to

days, • 365-Day Calendar Day Off (up to 5 days), • Station Delay by program, • Normally Open or Normally

Closed Master, Valves programmable by station; up to 5 with LX-IVM • Optional Weather Sensors are

programmable by station to prevent or pause watering; up to 4 with LX-IVM. • Station Run Time: 0 min. to

hrs. • Seasonal Adjust: 0% to 300% (96 hrs. maximum station run time), • 10 independent programs on the ESP-

LXI IVM • 8 start times per program,• Program Day Cycles include Custom days of the week, Odd, Odd no 31st,

Even, and Cyclical dates,•

Supply,Fixing & Commissioning of IVM-SOL Interfaces ( Integrated Valve Module) "Smart Solenoid - Field

Device'' DC output with interface module in-built in one device mountable on Solenoid Valve to connect

7.04 Controller and Valve on two wire path & it provides two-way communication between the valve and controller

to provide advanced diagnostic capability and faster response time as per specifications complete.

Supply,Fixing & Commissioning of IVM-OUT Interfaces with LX-IVM to manage 3rd party valves and external

gear such as pump stations as per specifications complete

Supply,Fixing & Commissioning of IVM-SD for surge protection on the 2-Wire path as required with copper

grounding rod, clamps, charcoal and all requisite accessories as per specifications complete

Supply,Fixing & commissioning of 6"Round box with greenlid with features Snap-in overlapping lid, Skid-

resistant lid texture,, Body built with three ridges for additional support to sidewallst & Having Dimensions @

Top Opening :6 1/8" Dia & Bottom Opening 8 5/8" Dia etc., complete, as per the instructions of

Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 1" Solenoid globe angle inlet Valves with provision to attach DC Latched

interface module, fabric reinforced Nitrile diaphram Material and rugged PVC construction ,compatible and

7.08 slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 40GPM ,max

water temp. upto 42degree centigrade without AC Coil & provision to attach PRS-Dial PGA Pressure Regulation

Optional PRS-D Nos 3.00 3,350.00

Supply,Fixing & commissioning of 1.5" Solenoid globe angle inlet Valves with provision to DC Latched

interface module, fabric reinforced Nitrile diaphram Material and rugged PVC construction ,compatible and

7.09 slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 100GPM ,max

water temp. upto 42degree centigrade, without AC Coil & provision to attach PRS-Dial PGA Pressure Regulation

Optional PRS-D Nos 12.00 5,100.00

Supply,Fixing & commissioning of 2" Solenoid globe angle inlet Valves with provision to DC Latched

interface module, fabric reinforced Nitrile diaphram Material and rugged PVC durable glass -filled nylon

construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and

maximum flow of 150GPM ,max water temp. upto 42degree centigrade, without AC Coil & provision to attach

PRS-Dial PGA Pressure Regulation Optional PRS-D

Supply,Fixing & commissioning of PRS-DIAL Pressure Regulator to Maintain constant outlet pressure

between 1.04 to6.9 KSC

Supply,Fixing & commissioning of direct bury -on wire connector with strain relief ,UL486 D certified ,with

waterproof silicon sealant ,fits wire from 22ga to6 ga as per specifications complete DBRY

Supply,Fixing & commissioning of automatic rain shut off device ,latching hinge with multiple rainfall settings

5mm to 20mm UL CUL listed and CE approved complete RSD BEX

Supply,Fixing & commissioning of WATERMARK Soil Moisture Sensor, The WATERMARK sensor is a resistive

device that responds to changes in soil moisture. Once planted in the soil, it exchanges water with the

surrounding soil thus staying in equilibrium with it. , as per specifications complete

Supply,Fixing & commissioning of UPS ZEBRONICS, Stabilizer 300watts & pump relay set as per

specifications complete

Supply,Fixing & Commissioning of IVM-SEN Interfaces with LX-IVM to control weather sensors or flow

sensors as per specifications complete

Carrying operation and maintanence work including necesaary repairs, cleaning and and replacement of

dameged items / materials for 5 years under DLP as per the directions of engineer in charge (for garden and

7.17 commercial area).

Submission of Shop drawing, As built drawing, Handing over documents, Training for maintenance to

team after commissioning of the system and including Supervision, Transportation charges

Sub Total Automation Irrigation System

Total Manual Irrigation System + Automation Irrigation System

Name of work: Development of Amritkal Garden

Horticulture work

DESCRIPTION UNIT QTY RATE AMOUNT

A SITE PREPARATION

Trenching in ordinary soil up to a depth of 60 cm including

removal and stacking of serviceable materials and then

disposing of surplus soil, by spreading and neatly leveling

1 within a lead of 50 m and making up the trenched area to Cum 2721.45 78.10

proper levels by filling with earth or earth mixed with sludge

or / and manure before and after flooding trench with water

(excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty

2 and carriage upto 5 km complete (earth measured in stacks Cum 1588.00 515.60

will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and

3 carriage upto 5 km complete (sludge measured in stacks will Cum 2172.00 294.00

be reduced by 8% for payment).

Rough dressing the trenched ground including breaking clods.

5 Fine dressing of the ground. Sqm. 35011.08 3.70

Spreading of sludge, dump manure and/or good earth in

6 required thickness as per direction of officer-in-charge (cost of Cum 3760.00 52.35

sludge, dump manure and/ or good earth to be paid

Mixing earth and sludge or manure in the required proportion

7 specified or Cum 3760.00 36.55

directed by the Officer-in-charge

Providing & laying Selection no. 1 grass turf with earth 50mm

to 60mm thickness of existing ground prepared with proper

level and ramming with required tools wooden and than

8 rolling the surface with light roller make the surface smoothen Sqm. 2840.00 87.50

and light watering the same and maintenance for 30 days or

more till the grass establish properly, as per direction of the

officer in charge

Preparation of beds for hedging and shrubbery by excavating

60 cm deep and trenching the excavated base to a further

depth of 30 cm, refilling the excavated earth after breaking

clods and mixing with sludge or manure in the ratio of 8:1 (8

parts of stacked volume of earth after reduction by 20%: one

9 part of stacked volume of sludge or manure after reduction by Cum 691.20 222.85

8%), flooding with water, filling with earth if necessary,

watering and finally fine dressing, leveling etc. including

stacking and disposal of materials declared unserviceable and

surplus earth by spreading and leveling as directed, within a

lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure

Digging holes in ordinary soil and refilling the same with the

excavated earth mixed with manure or sludge in the ratio of

2:1 by volume (2 parts of stacked volume of earth after

10 reduction by 20% : 1 part of stacked volume of manure after

reduction by 8%) flooding with water, dressing including

removal of rubbish and surplus earth, if any, with all leads and

lifts (cost of manure, sludge or extra good earth if needed to be

paid for separately) :

DESCRIPTION UNIT QTY RATE AMOUNT

Holes 90 cm dia, and 90 cm deep Each 235.00 143.10

Holes 60 cm dia, and 60 cm deep Each 92322.00 43.75

Holes 45 cm dia, and 45 cm deep. Each 19724.00 18.70

Plantation of Trees, Shrubs, and Hedge at site i/c watering and

11 removal of unsaverieable material’s as per direction of officer

in charge (excluding cost of plant & water)

Tree plant Each 235.00 7.30

Shrub plant Each 92322.00 3.65

Ground cover Each 19724.00 2.45

Supply and stacking Avenue plants or equivalent of height

210cm to 240cm in big poly bags of size 25 cm as per

direction of the office-in-charge

Providing and stacking of Aegle marmelos of height 60-75 cm.

1 with 5-6 branches in poly bags of size 25 cm as per direction Nos 1.00 450.00

of the officer-in-charge.

2 P/L of Amla Nos 2.00 90.00

3 P/L of moringa oleifera Nos 1.00 360.00

4 P/L of Moringa koennigi Nos 2.00 260.00

5 P/L of Sitaphal Nos 1.00 190.00

Evergreen Trees

6 Providing and stacking of Erythrina Indica nos 7.00 65.00

Providing and stacking of Cassia Fistula of height 165-180

7 cm. with 3-4 branches and thick stem in big size HDPE bags nos 14.00 65.00

as per direction of the officer-in-charge.

Providing and stacking of Cassia javanics of height 120-150

8 cm. with 3-4 branches and thick stem in big size HDPE bags nos 7.00 85.00

as per direction of the officer-in-charge.

9 Providing and stacking of Cassia nadoosa nos 7.00 65.00

Providing and stacking of milingtonia of height 45-60 cm. in

10 earthen pot of size 20 cm as per direction of the officer-in- nos 7.00 70.00

11 Providing and stacking of Kusum nos 7.00 70.00

12 Providing and stacking of Guaiacum officinale nos 7.00 350.00

13 Providing and stacking of thespesia nos 7.00 80.00

14 Providing and stacking of Erythrina varigata nos 7.00 450.00

15 Providing and stacking of Anthocephalus cadamba nos 7.00 350.00

Large Deciduous Trees

16 Providing and stacking Dalbergia sissoo nos 3.00 55.00

17 Providing and stacking of Azadirachta indica nos 10.00 65.00

18 Providing and stacking Samanea saman nos 3.00 450.00

19 Providing and stacking of Bombax ceiba nos 3.00 70.00

20 Providing and stacking of Chorisaiana Speciosa nos 3.00 1200.00

Screening Trees

21 Providing and stacking of Bambusa Vulgaris (Clumps) nos 10.00 200.00

22 Providing and stacking of Silver Oak nos 10.00 50.00

23 Providing and stacking of Delonix regia nos 7.00 60.00

Providing and stacking of Jacaranda Mimosaefolia of height

24 150-165 cm. in big polybags of size 25 cm as per direction of nos 8.00 60.00

the officer-in-charge.

DESCRIPTION UNIT QTY RATE AMOUNT

Providing and stacking of Lagerstroemia flos-reginae of height

25 150-165 cm. in big poly bag of size 25 cm as per direction of nos 8.00 120.00

the officer-in-charge.

26 Providing and stacking of Bauhinia blakeana nos 8.00 80.00

27 Providing and stacking of purpurea nos 7.00 50.00

28 Providing and stacking of bauhinia alba nos 7.00 70.00

29 Providing and stacking of Terminalia mantaly nos 8.00 250.00

30 Providing and stacking of Terminalia mantaly Varg. nos 7.00 280.00

Trees Near Water

31 Providing and stacking of Salix tetra sperma nos 2.00 850.00

32 Providing and stacking of mangifera indica nos 2.00 55.00

33 Providing and stacking of Pongamia Pinnata nos 2.00 50.00

34 Providing and stacking of Albiza lebbeck nos 2.00 450.00

35 Providing and stacking of Tectona grandis nos 2.00 110.00

36 Providing and stacking jack fruit nos 3.00 330.00

37 Providing and stacking amrapali mango nos 10.00 350.00

38 Providing and stacking Guava nos 2.00 150.00

39 Providing and stacking Mulbery nos 3.00 190.00

40 Providing and stacking Gooseberry nos 5.00 250.00

41 Providing and stacking Jamun nos 3.00 75.00

42 Providing and stacking Mango nos 6.00 380.00

Supply of best quality Shrubs grown in pots/ poly bags of

species with their specification- mentioned below, which are

healthy and completely free form all disease, ready for

Transplanting, inclusive of labour, loading, unloading by

manual means and cartage. All plants tobe approved before

planting by officer-in- charge. The minimum height of plants

to be 45 cms 75 cms depending on the species.

1 Providing & Displaying of Pennisetumsetaceum nos 550 370

2 Providing & Displaying of Cymbopogon nos 550 250

3 Providing and displaying of Chyrsopogon zizaniodes. nos 550 290

Water Plants - Ground Cover

4 Providing & Displaying of tradescantia zebrina nos 19034 20

5 Providing & Displaying of alternenthera sp nos 19034 20

6 Providing & Displaying of ipomoea batatas nos 19034 20

Water Plants - Shrub / Grass

7 Providing & Displaying of umbrella palm nos 1200 80

8 Providing & Displaying of Hymenocallis littoralis nos 1200 90

Sun loving Small Shrubs

9 Providing & Displaying of Clerodendrum inermia nos 114 20

10 Providing & Displaying of mangolia grandiflora nos 114 380

11 Providing & Displaying of liriope muscari nos 1449 240

12 Providing & Displaying of chrysanthemum indicum nos 1449 130

DESCRIPTION UNIT QTY RATE AMOUNT

Providing and displaying of Philodendron moonlight having

ht. 30 cm to 45 cm with 10 to 12 leaves, well developed, fresh

& healthy bright colour leaves in 25 cm size of Earthen

pot/Plastic pot & as per direction of the officer-in-charge.

14 Providing & Displaying of Euphorbia milli nos 1449 646

15 Providing & Displaying of Ruellia brittoniana dwarf nos 1449 90

16 Providing & Displaying of Dianella tasmannica V nos 1449 30

17 Providing & Displaying Schefflera arboricola nos 818 282

18 Providing & Displaying of murraya paniculata nos 859 15

19 Providing & Displaying of Tabernamontana nos 859 35

20 Providing & Displaying of leucophyllum frutescens nos 859 322.90

21 Providing & Displaying of hibiscus veriegated dwarf nos 859 45

22 Providing & Displaying of hamelia patens nos 28 50

23 Providing & Displaying of ixora coccinea nos 107 280

24 Providing & Displaying of Allamanda Cathartica nos 859 45

25 Providing & Displaying of clerodendrum inerme nos 28 20

26 Providing & Displaying of Asiatic lilly hybrid yellow nos 28 129.15

27 Providing & Displaying of Asiatic lilly hybrid lilly orange nos 28 129.15

28 Providing & Displaying of Asiatic lilly hybrid red nos 28 129.15

29 Providing & Displaying of Jatropha Integerrima/ multifida nos 48 35

30 Providing & Displaying of mussanenda erythrophylla nos 21 110

31 Providing & Displaying of dracaena angustifolia nos 51 350

32 Providing & Displaying of Cordyline fruticosa nos 48 225

33 Providing & Displaying of Calliandra Haematocephala nos 21 35

34 Providing & Displaying of plumbago auriculta nos 859 110

35 Providing & Displaying of Alpinia purpurata nos 22 121.00

36 Providing & Displaying of areca palm nos 23 157.85

37 Providing & Displaying of revenala madagascariens nos 12 180

38 Providing & Displaying of cycus revoluta (sago palm) nos 21 1183.90

39 Providing & Displaying of Russellia Equisetiformis nos 300 330.00

40 Providing & Displaying of Livistona Rotundifolia Plam nos 21 86.10

41 Providing & Displaying of Pennisetum setaceum cupreum nos 531 550.00

42 Providing & Displaying of Chrysopogon Zizanioides nos 531 70.00

Shade loving Shrubs

43 Providing & Displaying of Alpinia zerumbet nos 322 250

44 Providing & Displaying of sanservieria variegated nos 322 450

Providing and displaying of Schefflera high colour having ht.

25 cm to 30 cm, well developed with fresh & healthy foliage

in 25 cm size of Earthen pot/Plastic pot & as per direction of

the officer-in-charge.

46 Providing & Displaying of alocasia macrorrhiza nos 322 120

Providing and displaying of Dieffenbachia Mosaic having ht.

30cm to 45 cm with 10-12 leaves, well developed, fresh and

healthy in 25 cm size of Earthen pot/Plastic pot. & as per

direction of the officer-in-charge

48 Providing & Displaying of dracaena angustifolia nos 322 350

49 Providing & Displaying of philodendron selloum nos 947 162

50 Providing & Displaying of agave augustifolia nos 116 280

51 Providing & Displaying of philodendron xanadu nos 322 184

DESCRIPTION UNIT QTY RATE AMOUNT

Providing and displaying of Philodendron moonlight having

ht. 30 cm to 45 cm with 10 to 12 leaves, well developed, fresh

& healthy bright colour leaves in 25 cm size of Earthen

pot/Plastic pot & as per direction of the officer-in-charge.

53 Providing & Displaying of elegans palm nos 322 108

54 Providing & Displaying of Horse tail nos 248 360

55 Providing & Displaying of Jaminum Grandiflora nos 40 30

Different Colour Leaves

56 Providing & Displaying Iresine nos 177 20

57 Providing & Displaying of Excoecaria bicolor nos 177 40

58 Providing & Displaying of Rohea nos 710 150

59 Providing & Displaying of acalypha obovata nos 177 36

60 Providing & Displaying of ornamental kale nos 710 54

61 Providing & Displaying of Croton nos 710 56

62 Providing & Displaying of ocimum tenuiflorium nos 157 40

63 Providing & Displaying of ocium basilicum nos 157 250

64 Providing & Displaying of mentha nos 1114 60

65 Providing & Displaying of trachyspermum ammi nos 157 210

66 Providing & Displaying of thymus citrodorus nos 157 230

67 Providing & Displaying of coriandrum sativum nos 157 220

68 Providing & Displaying of rosemarinus nos 157 250

69 Providing & Displaying of origanum vulgare nos 157 280

70 Providing & Displaying of asparagus racemosus nos 157 180

71 Providing & Displaying of bacopa monnieri nos 278 55

Sun loving shrubs

72 Providing & Displaying of tecoma stans nos 39 45

73 Providing & Displaying of galphimia glauca nos 241 180

74 Providing & Displaying of bougainvillea (torch glow) nos 242 322.90

75 Providing & Displaying of hibiscus rosa sinensis (yellow) nos 241 45

76 Providing & Displaying of hamelia patens nos 242 50

77 Providing & Displaying of ixora coccinea nos 107 280

78 Providing & Displaying of tecoma gaudichaudi nos 87 50

79 Providing & Displaying of jasminum sambac nos 87 40

80 Providing & Displaying of clerodendrum inerme nos 711 20

81 Providing & Displaying of Asiatic lilly hybrid yellow nos 437 129.15

82 Providing & Displaying of Asiatic lilly hybrid lilly orange nos 438 129.15

83 Providing & Displaying of Asiatic lilly hybrid red nos 711 129.15

Providing and stacking of lantana depressa of height 15 cm to

1 20 cm, full of branches and foliage in 15 cm size of Earthen nos 1048 525.00

Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of wedelia trilobata, well developed

to 20 leaves, full of branches and foliage in 25 cm size of

Earthen Pot/Plastic Pot & as per direction of the officer-in-

Providing and stacking of lantana sellowiana Earthen

Pot/Plastic Pot & as per direction of the officer-in-charge.

DESCRIPTION UNIT QTY RATE AMOUNT

Providing and stacking of cuphea ignea, of height 25-30 cm.,

4 full of branches well developed in 15 cm size of Earthen nos 4204 450.00

Pot/Plastic Pot & as per direction of the officer-in-charge..

Providing and stacking of sedum well developed with fresh &

5 healthy in 25 cm size of Earthen Pot/Plastic Pot & as per nos 4204 210.00

direction of the officer-in-charge

Providing and stacking of fern plant in 15 cm size of Earthen

6 Pot/Plastic Pot & as per direction of the nos 1214 85.00

officer-in-charge.

Providing and stacking of Ophiopogon variegated,

7 Green/Black full of leaves in 15 cm size of Earthen Pot/Plastic nos 4204 285.00

Pot & as per direction of the officer-in-charge.

Providing and stacking of zephranthus lily in 20 cm size of

8 Earthen Pot/Plastic Pot & as per direction of the officer-in- nos 1449 250.00

Supply of best quality house plants, hedges & ground cover,

Succulents bulbs & Rizomes, Reeds & Grasses and Acquatic

Plants grown in pots/poly bags of Species with their

specification mentioned below, which are healthy and

completely free from all disease ready for transplanting,

inclusive of Labour, loading, uploading by Manual means and

cartage. All plants to be approved before planting by Officer in

charge. The minimum height of Plants to be 15 cm to 90 cms

depending on the species.

1 Providing & Displaying of red fountain grass Nos 24.00 55.00

Preparation of mounds of various size and shape by available

excavated / supplied earth in layers not exceeding 20 cm in

1 depth, breaking clods, watering of each layer, dressing etc., cum 108.00 401.30

lead upto 50 meter and lift upto 1.5 m complete as per

direction of Officer-in-charge.

(Maintenance work)

Comprehencive maintainence including maintaining and

operating and replacing all assets if necessary install in garden

including green space and providing supervisor, watchman,

sweeper etc and redevelopment of lawn, scrub, tree etc as

required and cleaning of external and internal pathway,

2 Gajiba, jogging track all benches, all dustbin,, watering plants

all overhead and under ground tanks, all stone floors and

dedos and all garden area as specified and by engaging labour

force with cost of material and labour and all taxex for all

works as directed by engineer in charge.

For 3 years Sqm. 25000.00 675.00

DESCRIPTION UNIT QTY RATE AMOUNT

Providing services of Tata 407 vehicle for carriage of purned

branches/leaves of the trees from the pruning site

including loading/unloading lifting upto approved

municipal dumping ground as per direction of Engineer-in-

charge as and when required including cost of Diesel, Mobil

oil, driver and four labours all in uniform with necessary T&P

such as spade, bill hook, rope, tasla, hassion cloth, safety

cones etc., all complete. (Atleast Tempo/Tata 407 should be

loaded upto the body mark of

vehicle for counting a trip).

ESTIMATE FOR ELECTRICAL WORK- AHMEDABAD AMRITKAL PARK

DSR / AOR / SOR

S. NO. DESCRIPTION AMOUNT

AMOUNT WITH GST

A CABLE,EARTH PIT & FEEDER PILLAR

2 CABLE LAYING AND END TERMINATIONS

3 FEEDER PILLER

5 Turnkey Factor

B POLE & FIXTURES 4049925.638

BUILDING (Entry Block , Maintenance Office And Toilets,

Restaurant & Food Kiosk

1 DISTRIBUTION BOARD

2 INTERNAL WIRING

3 SITC FANS & LIGHT FIXTURES

H SUBMERSIBLE PUMPS

I WATER COOLER & RO

Total Amount x 5% /36 month ₹

Total Amount x 5% /36 month ₹

Caring operation & maintenance (under DPL) rate

including necessary repaired & replacement of damages 36 ₹

material. For 3 years (36 month)

ESTIMATE FOR ELECTRICAL WORK- AHMEDABAD AMRITKAL PARK

SUBHEAD:ELECTRICALWORK

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A SCHEDULEITEMS

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty

1.1 cover. (A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency.

(b)For Electrical installation up to 11 KV in

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

1.3 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. KG 1550 77

TOTALFOREARTHINGCARRIEDOVERTOSUMMARY

CABLE SUPPLY, LAYING, DWC HDPE PIPE, CHAMBER (MANHOLE) AND END

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

2.1 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe

of following size of cables

2.2 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) meter 1500 369

2.3 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) meter 2250 215

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

3 Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

3.1 4 core 10 Sq. mm meter 4500 137

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper

4 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe

at road crossing or floor of following size of cables.

4.1 4 core 6 Sq. mm meter 4850 503

4.2 3 core 6 Sq. mm meter 3500 390

4.3 3 core 4 Sq. mm meter 3250 283

4.4 3 core 2.5Sq. mm meter 2850 211

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road surface

for enclosing cable (A)50 mm outer dia

5.1 50 mm outer dia meter 16700 62

5.2 90 mm inner Dia. meter 2500 95

5.3 120 mm inner Dia. meter 1500 136

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1

cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter,

mm bottom diameter and 180 mm deep ( inside) with

chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1

cement : 5 fine sand : 10 graded stone aggregate 40 mm1461

nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand)

mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following

size of cables.

7.1 2 to 4 core 2.5 / 4 Sq. mm Set 250 33

7.2 2 to 4 core 6 Sq. mm Set 100 38

7.3 2 to 4 core 10 Sq. mm Set 70 38

Providing and, fixing heavy duty flange type brass double compression type cable gland

8 with rubber ring for PVC insulated armoured cable complete with out going tails, insulating

tape etc for following size of cables.

8.1 3 & 1/2 core 70 Sq. mm Set 4 102

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single

core cable in the existing surface / recessed steel / PVC conduit as required.

9.1 3x2.5sq.mm meter 3500 137

TOTAL FOR CABLE LAYING, DWC HDPE PIPE, CHAMBER (MANHOLE) AND END

TERMINATIONS CARRIED OVER TO SUMMARY

B NONSCHEDULEITEMS

FEEDER SECTION PILLAR TYPE-A (3-4 FEEDER)

Supply, installation, Testing and commissioning of the Feeder Section Pillars as per

specifications, IS and Drawings The unit rate for each item shall include: Call for final

inspection prior to dispatch. Delivery of the fidder pillar / section pillar to site. Shifting of the

fidder / section piller from site to store to the suitable location. Shifting & Fixing of Section

Pillar. Assembly and wiring of component supplied separately. Installation of section piller to

including removing old section pillar. Earthing all components, frame etc. to a common

10 internal earth bar. M.S. parts should painted with powder coating. Supply & fixing all Set 6 49161

accessories and supporting structure. Supply & fixing of M.S. 40 x 40 x 6 channels for fixing

the panels. Connection, testing and commissioning Checking of internal connection and

wiring, operation of switches, starter, MCCB, relays, contactors etc. Supply of necessary

tools, hardware, testing equipment etc. etc. Electrical contractor shall carry out the

insulation test at site and all the readings shall be submitted in duplicate to the consultant or

engineer-in- charge. Approval from State Electricity Board &Liason work.

10.1 FEEDER SECTION PILLAR TYPE-B (2-3 FEEDER)

Supply, installation, Testing and commissioning of the Feeder Section Pillars as per

specifications, IS and Drawings The unit rate for each item shall include: Call for final

inspection prior to dispatch. Delivery of the fidder pillar / section pillar to site. Shifting of the

fidder / section piller from site to store to the suitable location. Shifting & Fixing of Section

Pillar. Assembly and wiring of component supplied separately. Installation of section piller to

including removing old section pillar. Earthing all components, frame etc. to a common

11 internal earth bar. M.S. parts should painted with powder coating. Supply & fixing all Set 6 30603

accessories and supporting structure. Supply & fixing of M.S. 40 x 40 x 6 channels for fixing

the panels. Connection, testing and commissioning Checking of internal connection and

wiring, operation of switches, starter, MCCB, relays, contactors etc. Supply of necessary

tools, hardware, testing equipment etc. etc. Electrical contractor shall carry out the

insulation test at site and all the readings shall be submitted in duplicate to the consultant or

engineer-in- charge. Approval from State Electricity Board &Liason work.

11.1 TOTAL FOR FEEDER PILLAR CARRIED OVER TO SUMMARY

12 Turnkey Factor

Providing of turnkey factor to the concirn eletric department as per the load to be opretor in

ESTIMATE FOR ELECTRICAL WORK- AHMEDABAD AMRITKAL PARK

SUBHEAD:ELECTRICALWORK

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A SCHEDULEITEMS

(b) LED Bollard fittings of minimum height 600 mm & dia.100mm having polycarbonate

clear/milky diffuser mounted on 3mm thick aluminium finished powder coated pipe with

base plate 160x160mm with erection by M8x75mm fastner with required RCC

foundation.IP65 for 9 to 20 watt ,surge-4kv cat- III

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum

2 canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and

accessories wired upto terminal block.IP

2.1 (ii)32-40W Cat-III Each 110 6193

Supply of approved make frp/grp pole having followiing specifications :

FRP/GRP pole made by centrifugal moulding process using thermoset resin polyester/epoxy

resin system having minimum glass content 45.0%.The pole should be in one pieceand tapered

round in shape,having smooth outside surface finish and should be totally fre from

corrosion as well as non conductive and shock proof. Pole should be provided with FRP/GRP base

bracket dully fabricated from metal(M.S) and dully claded with FRP/GRP material to avoid any

metal exposer and painted with PU paint. Pole should mechanical properties i.e

Specfic gravity (ASTM D 792) 1.3-1.8 Kg/m3, 2. Glass Content % by weight (ASTM D 2584)

45.0 -55.0%, 3. Water absorption (ASTM D 570) <0.5%, 4. Tensile Strength(ASTM D 638)

200+/-50Mpa, 5. Flexural strength (ASTM D 790) 250+/-50Mpa, 6. Compressive Strength (ASTM D

695) 200+/-50MPa, 7. Yeild Strength(ASTM D638) 250 +/-50MPa. Pole should be flame retardant as

per IS 6746.Resin used shall be UV resistance and pigmented. Pole should be painted with first coat

of epoxy primer and then two coat of highly weather resistance polyurethen paint to ensure proper

addhesion of the paint.Minimum thickness shall be 80 to 100 micron.Defelection of the pole shall

not exceed more than 10.0 % of the length of the pole for the given load.Pole should be generally

made as per the dimensional data, performance criteria and some interchagebility features of

poles as per the standard ANSI C123.20 latest version of ASTM D 923/01 including cable

termination box with necessory

accessories.The size of pole and type of installation with foundation , Anchor Base & Internal

junction box as per the

(3) 'B' class (Heavy Duty) frp/grp pole

suitable for base plate mounting

[C] Overall Length of 5.0 meter, Average thickness : 7mm, Top/Bottom Outside Dia.

3.2 76/160mm +/-2.Weight of Pole 21.0 Kg approx. (Without base) Metal Anchor Base dully frp Each 110 18428

claded (Size : 310 Ø * 12mmthk , Mounting hole PCD 260mm * 4 nos. of 16 Ø hole)

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm

dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for

4 & 6 mtr pole)

Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm

stone metal duly plastered with necessary curing for pole muffing or any other purpose.

Pole should be flame retardant as per IS 6746.Resin used shall be UV resistance and

pigmented. Pole should be painted with first coat of epoxy primer and then two coat of highly

weather resistance polyurethen paint to ensure proper addhesion of the paint.Minimum thickness

shall be 80 to 100 micron.Defelection of the pole shall not exceed more than 10.0 % of the length

of the pole for the given load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility features of poles as per the standard ANSI

C123.20 latest version of ASTM D 923/01 including cable termination box with necessory

accessories.The size of pole and type of installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site requirement .

6.1 (3) 'B' class (Heavy Duty) frp/grp pole suitable for base plate mounting

[H] Overall Length of 10.0 meter, Average thickness : 9mm, Top/Bottom Outside Dia. 76/244mm

6.2 +/-2.Weight of Pole 62.0 Kg approx. (Without base) Metal Anchor Base dully frp Each 5 43801

claded (Size : 450 Ø * 18mmthk , Mounting hole PCD 390mm * 6 nos. of 20 Ø hole

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

7 efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM- 79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

7.2 (v) above 120 to 160 watts Cat-III Each 30 10151

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 70V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

85 umens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

G) Step Light having Aluminium die cast and

8.1 ABS Plastic material. Each 30 568

(i) 5 watts, Direct/Indirect luminaire Cat-lll

TOTAL FOR LIGHT FIXTURE CARRIED OVER TO SUMMARY

Supply, installation, testing and commissioning of tree up lighter Adjustable ground recessed Led

fixture tree up light, 3W LED light for tree up lighter. Fixture shall have Ingress protection of IP

1 for the optical part and the driver suitable for exterior grade installations. Make Philips, Havells Each 170 9631

/Crompton specifications to be approved by consultant before procurement. foundation included

Supply, installation, testing and commissioning of in point light Led fixture 6W LED light for feature

suitable. Fixture shall have Ingress protection of IP 65 for the optical part and the driver suitable for

exterior grade installations. Make Philips, Havells /Crompton specifications to be approved by

consultant before procurement.

3 SITC of railing inserted light 14W/per meter ip-68 rating as respect. meter 250 444

4 SITC of 8w LINEAR GRAZER LIGHT FIXTURE Each 40 2962.0

SITC of UP & DOWN LIGHTER Luminaire for LED 2x6W 230V, Color Kelvin

3000k,4000k,6000k , Direct light emission, CRI >85, UGR<19, with 3KVA SAP, FR4 glass

epoxy LED., halogen-free internal wiring, 120-277VAC, 50/60Hz,0.6A@ 120V, 0.26A @

277V,72W 250-1050Ma, 10-75VDC,60W Max., >0.9, >20% 88% Typical @ 227V Full Load,

FCC Part 15B Consumer, EN55015 Class 2, LED Class 2, -40*C To 59*C, A,55/66*C, TC,

85*C Max. IP20, Dia=110mm, , H=260mm

TOTAL FOR LIGHT FIXTURE CARRIED OVER TO SUMMARY

ESTIMATE FOR ELECTRICAL WORK- AHMEDABAD AMRITKAL PARK

SUBHEAD:ELECTRICALWORK

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A BUILDING (Entry Block , Maintenance Office And Toilets, Restaurant & Food Kiosk

DISTRIBUTION BOARD & INTERNAL WIRING

DISTRIBUTION BOARD

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

1860 IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used

of same company of MCB to be used) suitable for single phase incoming and horizontal

single phase outgoing

1871 8 way, sheet steel double door Ea. 12 1141

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

6.2 63 amps Nos 12 527

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on

1739 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

1742 Single pole Nos. 96 111

Supplying and fixing following rating, double pole, single phase and neutral, 240 volts,

9 residual current circuit breaker ( RCCB), having a sensitivity current upto 30 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc as required.

Total carried over to Summary

INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type switch / bell push & accessories

11 and earth continuity of following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(g) with 16 swg HGS metal conduit pipe and accessories painted black. erected concealed

in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(g) with 16 swg HGS metal conduit pipe and accessories painted black. erected concealed

in wall/ceiling complete- Cat. III

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(B) With 16 swg HGS metal conduit pipe and accessories painted black.

(c) 3 wire 1.5 sq. mm Mtr. 3500 141

(d) 3 wire 2.5 sq. mm Mtr. 1450 165

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity

of following size

(B) with 16 swg HGS metal conduit pipe and accessories painted black.

(d) 3 wire 4 sq. mm Mtr. 650 193

(e) 3 wire 6 sq. mm Mtr. 450 252

(f) 3 wire 10 sq. mm (use earth wire of 4 sq.mm ) Mtr. 350 372

(i) 4 wire 10 sq. mm (use earth wire of 4 sq.mm ) Mtr. 850 457

Providing & erecting following type of Modular Type Accessories with necessary connection.

As desired by Engineer In charge 6 A socket WITH 6 Amp. SP one way switch

Providing & erecting following type of Modular Type Accessories with necessary connection.

As desired by Engineer In charge6/16Amp. Universal socket WITH 16 Amp. SP one way Each 65 127

Providing & erecting following type of Modular Type Accessories with necessary connection.

As desired by Engineer In charge 20Amp. Universal socket WITH 20 Amp. SP one way Each 60 450

SITC FANS & LIGHT FIXTURES

Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 16-20 watts, Surge-2 KV

Supply, Installation, Testing and Commissioning of suitable 1200 sweep, BEE 5 Star rated,

Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85,

Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD <

10%, with remote unit for Speed Control and all remaining accessories including safety pin,

nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage

and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase

AC Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in

Supplying, fixing, testing and commissioning of following size exhaust/ fresh air fan complete

with gravity louver and connection with 3 core flexible wire as required.

4 SITC of 8w LINEAR GRAZER LIGHT FIXTURE Each 32 2962.0

ESTIMATE FOR ELECTRICAL WORK- AHMEDABAD AMRITKAL PARK

SUBHEAD:ELECTRICALWORK

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

1 AUDIO & CCTV SYSTEM

SUPPLY, INSTALLATION, TESTING & COMISSIONING OF HIGH-SPL FOREGROUND

MUSIC SPEAKER WITH A 8" LF8 DRIVER OR BETTER AND EMB2S EXTENDED HIGH-

FREQUENCY COMPRESSION DRIVER, BIAMPLIFIED 2WAY ARRAY LOUDSPEAKER

SYSTEM; WITH INDIVIDUAL MODULE FREE FIELD FREQUENCY RANGE (-10DB) OF

80HZ - 18KHZ OR BETTER & PEAK POWER HANDLING OF >= 800W LF . THE

LOUDSPEAKER MODULE SHALL HAVE A MAX. SPL (PEAK) OF MF/HF>= 121DB OR

BETTER. IT SHOULD HAVE HORIZONTAL NEAR DISPERSION PATTERN OF 90º OR

BETTER, VERTICAL DISPERSION OF THE ARRAY SHALL BE 60º OR BETTER. THE

MODULES SHALL HAVE A WEATHER RATING OF IP55. including SUPPLY,

INSTALLATION, TESTING & COMMISSIONING OF OEM AU SHAPE MOUNTING

ARRANGEMENT FOR SUSPENSION OR WALL MOUNTING OF THE MODULES

OFFERED ABOVE.MAKES.

SITC OF 8 CHANNEL CLASS D NETWORKABLE POWER AMPLIFIER WITH A MAX

OUTPUT POWER OF 8X500W@8 OHMS, OR BRIDGED MODE OUTPUT POWER OF 4X

1000W @ 8/4 OHMS. 20HZ - 20 KHZ, SNR OF 102DB AND THD + N OF <0.4% WITH

BUILT IN PROTECTION SUCH AS LIMITERS, TEMPERATURE, DC, SHORT CIRCUIT,

45 PEAK CURRENT LIMITERS, TURN ON DELAY ETC. BUILT IN DSP FOR MATRIX Nos. 2 251,160.00

ROUTING, SPEAKER EQUALIZATION, DELAYS, ARRAY EQS ETC. COMPLETE WITH

ETHERNET PORT FOR NETWORK CONTROL, PROGRAMMING AND MONITORING.

SHALL OFFER OPTIONAL NETWORK AUDIO CONNECTIVITY (DANTE OR COBRANET)

THROUGH EXPANSION SLOT. .MAKES. JBL

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 2 CONDUCTOR

AWG(168 X 34) OXYGEN-FREE BARE COPPER (HIGH CONDUCTIVITY) CABLE NEC

46 TYPE CM AND CL3 TYPE FOR AUDIO ONLY WITH DC RESISTANCE: 1.60 Ω/1000FT. Roll. 2 28,704.00

,MUTUAL CAPACITANCE: 22.3PF/FT.,VOLTAGE RATING: 300V,MAXIMUM CURRENT:

17A@25˚C, AND CABLE ROLL PACKING -500 MTR. .MAKES. BELTEN

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF CAT6 UTP 23AWG

TWISTED PAIR ARMORED CABLE, SUPPORTS GIGABIT ETHERNET (1000 BASET)

STANDARD. OPERATES AT BANDWIDTH OF 250 MHZ. THIS CABLE WELL EXCEEDS

THE REQUIREMENTS OF TIA/EIA-568-C.2.,CONDUCTOR RESISTANCE (DC):

OHM/1000 MTR @20°C MAX,IMPEDANCE: 100±15% OHM AND TEMPERATURE

RATING: -20° TO + 60°C .ROLL PACKING:305 MTR.ENHANCED PERFORMANCE

CABLE FOR TRANSMISSION OF HIGH SPEED DATA, DIGITAL AND ANALOGUE VOICE

AND VIDEO (RGB) SIGNALS ON LANS. MAKES- D-LINK

SITC OF WEATHERISED ENCLOSURE FOR AUDIO AMPLIFIER WITH FRONT DOOR,

FRONT AND BACK ADJUSTABLE MOUNTING RAILS, 1 FAN MOUNTING PROVISION,

TOP AND BOTTOM CABLE ENTRY PROVIDES OPTIMAL FLEXIBILITY FOR CABLE

MANAGEMENT,EASY WALL MOUNT PROVISION, EASY INSTALLATION- STANDING /

WALL MOUNTING OPTION COMPATIBLE WITH INTERNATIONAL STANDARDS AND

ENCLOSURE DIMENSION'S ARE WXDXH (600 X 600 X 340 MM). MAKES- LIBERTY

TOTAL FOR AUDIO SYSTEM CARRIED OVER TO SUMMARY

Supply, Installation, Testing and Comissioning of USB Full HD 1080p@30fps Web Camera,

1/3”, 2.07MP sensor, 60 Degree FOV, built in Mic, 360 degree manual rotation, privacy

3355 shutter, MJPEG compression format, Auto Focus, Auto white balance & other image Each 20 17,122.00

processing algorithms, USB 2.0, BIS, CE,FCC, RoHS certified,

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CENTRAL CONTROL UNIT For DCN Next Generation or DCN wireless systems, or

a combination of the two In single‐CCU; maximum 245 wired contribution units, plus

wireless delegate units For multi‐CCU systems, with up to 30 CCU’s and a total of

contribution units Voice activated microphone mode for wired and wireless systems Ethernet

connection for configuration and control computers [Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ]

51 42 Video Display System Nos 2 486129.5

SITC of 20 x SFP ports

4 x Combo 10/100/1000BASE-T/SFP ports

4 x 10G SFP+ ports

6 kV surge protection on all RJ-45 access ports

Switch Resource Management (SRM) for flexible

management of system resources

Redundant Power Supply (RPS) support

MPLS L2VPM/L3 VPN support

Full L3 routing protocol support including OSPF, BGP, and

ISIS for IPv4/IPv6

SDN-enabled switch, compatible with Openflow

10-GbE SFP+ to SFP+ 1M Direct Attach Cable [Approved

by Competent Authority i.e. not Below the rank of Executive

53 Surge protector for Video & power signal to Safeguard the camera from any kind of Surges Nos 2 3230

54 42U Rack including all accessories as complete as required. Nos 1 90412

55 12U Rack including all accessories as complete as required. Nos 1 36943

SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m

56 [Approved by Competent Authority i.e. not Below the rank of Nos 20 1883

Executive Engineer ]s required.

Cat 6 information outlet that should confirm or exceed component specifications TIA/EIA-568-

B.2-1 standards for physical & electrical Specifications, should be fully unshielded type and

should have the tool less mechanism with inbuilt crimping tool and it should be Third Party

certified and tested including G.1. Box & Modular cover plate, (RJ- 45).

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Supplying, installing, testing and commissioning of UL Listed ONVIF Compliant 16 channel Network

Video Recorder with 2 SATA HDD Slots with storage of 8 TB storage , Recording Bandwidth up to

320 Mbps , Recording Resolution 8MP(4K) , 5MP ,3MP,2MP,1.3MP,1MP, Alram I/O 16 Ch Alarm in

1Ch Alarm out , Ethernet RJ-45 (1000 Mbps)

BRE Global certified 3c x 1.5 sq.mm Fire Survival armoured cable with Class-2 Copper

conductor as per BS EN 60228, twisted, with Mineral ceramic glass fire barrier tape covered

by an extruded layer of Cross-linkable Low smoke zero halogen (LSZH) insulation as per BS

EN 50363 and 1.SZH inner & outer sheath as per BS:7846. Should retain Circuit integrity as

per clause 26 2e of BS: 5839-1. BRE Global & LPCB-FPC certificates to be provided. Outer

sheath should be Anti-Rodent

60 IP 66 rated whether proof Junction Boxes for Camera Nos 40 6805

61 HDPE Duct (40 mm) complete with all accessories as required. Mtr. 2500 194

62 Underground/Over ground Laying of HDPE Pipe, OFC/ Power! Data/ Coaxial cables- Mtr. 1500 622

63 SITC Armoured 6 Core Optical Fiber Cable Single mode for induvial junction connection. RM 3500 123

64 Supply & laying of Cat-6 Armoured Cable for out door camera RM 3000 59

TOTAL FOR CCTV CARRIED OVER TO SUMMARY

ESTIMATE FOR ELECTRICAL WORK- AHMEDABAD AMRITKAL PARK

SUBHEAD:FOUNTAIN WORK

Description Unit Qty Rate

Supply, Installation, Testing & Commissioning of Interractive Water Fountain with Multi

Colour Illumination suitable for 7.2mtr dia Fountain Equipment/Nozzles -24no. 23mm Foam

jet (Bronze) with Ball joint (Brass) with Inlet Pipe arrangements as required.

Interconnecting Plumbing - between Pumps and Fountain Nozzles with UPVC pipes (sch

40) & UPVC Fitting(sch 80) and Control Ball valves (UPVC) as required. Pump -of 1no.

Submersible pumpset for Fountain operating on 3phase 415V AC Supply having 760LPM

Discharge at 8mtr Head (3HP) & 1no. Submersible pumpset for Fountain operating on

3phase 415V AC Supply having 1600LPM Discharge at 8mtr Head (7.5HP) with suitable

pipe connection and 2no. stainless steel 304 grade Suction Strainer as required. Pump

make- KIRLOSKAR Illumination - 24no. Stainless steel body Underwater light fitting IP68

grade operating on 12V DC Supply - 24W LED Bulb RGB including fixing clamps and

necessary Looping Cables within the Pond as required. Interconnecting Control Cables -

Submersible cables of suitable sizes - 2Runs x 4Core x 2.5sqmm Copper Coductor

Round Flexible cable and 2Runx 3Core x 4sqmm Copper Coductor Flat Flexible cable and

67 Earthing Conductors including suitable PVC junction boxes with terminations with suitable Lot. 1 2337946

PVC Conduit pipes from Fountain Pond to Control Panel (approximately 30mtr) as

required.Cable make- POLYCAB/FINOLEX SS Mesh Cover-4' x 3' size of wire mesh of

size 20mm x 20mm x 2mm thick made up of stainless steel 304 grade materials and

covered with 1mm opening fine mesh (ss304) to protect the pump from the dust and

garbage articles etc,. as required. Music System- Music system consists of 1no. PA

Amplifier with Built-in Digital Player model-TZA-7000DP, 2nos. Box speakers model-SRX

500 with necessary Junction boxes, Interconnecting wiring between Speakers, PA

Amplifier with suitable wires and PVC coduit pipes & fittings as required. PA system make-

AHUJA Fountain Controller Unit- Outdoor type Control Panel made out of MS sheet

including Door with locking arrangement with powder coated finish along with – 1no. 100A

TPN Incoming MCCB, 2nos. Starters with O/L Relay for Pump, 1no. single preventor, 1no.

2 Pole MCB for Lights, 2no. 230v/12v DC Power supply for Lights, 2no. RGB Controller

Unit for Lights Colour changing, 2no. 24Hrs Timer for Automatic ON/OFF (for Pump and

Light) including Panel wiring etc,.as required. 1SET

Long body Clear Stream jet Nozzle

Nozzle Specification: - Bronze/Gunmetal/Brass 24 NOS.

Supply & Fixing water proof high power LED lights watt, and

9x3=27Watts color changing RGB/Multicolor made out of stainless steel 304gr. 24 NOS.

Make: River Fountain

Solenoid Valve for Nozzle control by PLC and VFD based electrical panel. 24 NOS.

DCC Programmable SMPS controller for lights 3 NOS.

Supply, Installation, Testing & Commissioning of Heavy Duty VFD (Variable Frequency

Drive) for 3 HP Pump to generate slow motion 24 NOS.

Supplying installation testing and commissioning of Open well submersible Pump Set with

totally enclosed water filled squirrel cage

induction motor water lubricated with oil seals with sleeves and thrust

bearing having all rotating parts dynamically balanced for silent operation Suitable for three

phase 10HZ AC supply Motor Body: CI Pump Body: CI Capacity: 3- HP Three Phase

Programmable panel with BFD

1. With code-based technology

(new concept in INDIA)

2. Pre-Programmed Technology y general Concept in INDIA These all technology is

supported by our controller. 1 NOS.

Electrical material

Make: - Polycab wires/National/Kalinga complete as per the direction & entire Satisfaction

of Engineer in charge.

(A) Three core flat type 2.5 Square mm

(B) Four Core 1.5 square mm. (C) Two Core 1 square mm. - 1 LOT

Plumbing (Piping) Work: Supplying and Fixing of UPVC, PVC & Pipe (10 & 6 Kg/cm2) of

Make: -Prince/Supreme/Prakash or equivalent confirming to IS

4985:2000 including all UPVC fitting i/c jointing with good quality - 1 JOB

solvent of following sizes. All fixing to be done to the entire satisfaction and sample

approved by Engineer-In-charge.

Audio power amplifier (250 watt) Make -: Stranger / National /Ahuja

OL protection /OV protection / High-fidelity (Hi-Fi) -1 NOS.

Supply and fixing of 50Watts - speakers with etc., complete as per standard specifications. -

SS-304 – 16mm thickness Grating for Nozzle -24 NOS.

Drawing/ Design/Installation /Testing /Commissioning - 1 JOB

Total for fountains

ESTIMATE FOR ELECTRICAL WORK- AHMEDABAD AMRITKAL PARK

S.N. DESCRIPTION UNIT QUANTITY RATES SOR AMOUNT

1 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar

Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame

With Twin Wall Profile, Front Cover : High Transmission Low-Iron Tempered Glass

(AR Coated), High efficency and positive power tolerance Pmax: 0/+5, Module

Efficiency should be approx. 19.5%-22%, Normal operating temperature 45'C,

Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed with Bypass

diodes, 100% Electroluminescence test to ensure error free Modules, Thep. temp.

co-efficient of the PV module shall equal or better than -0.45%/degree C. Solar PV

modules of minimum fill factor 75% to be used. Unit Production:- More than

Unit /kw /day (Actual)(1Year Avg) With 10 year Product warranty and 25 year

Linear Power Warranty includes all mechanical and electrical parameters of the

Solar panel. Modules must be complied to the DCR(Domestic content

requirements). The Ration of AC to DC is 5:6 for the Installation capacity which are

given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency: 97.5% -

98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor:

~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Integrated

protection of Inverter are Anti-islanding Protection, Input Reverse Polarity

Protection, Insulation Resistor Detection, Ground fault protection, Residual Current

Monitoring Unit, Output Over Current Protection, Output Short Circuit Protection,

Output Over Voltage Protection, PV array string fault Protection. Protection

Degree: IP65, User Interface LCD & APP, Datalogger & Communication: GPRS /

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output Over

Current Protection Integrated, Output Short Circuit Protection Integrated, Output

Over Voltage Protection Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure:

The mounting (Rectangular pipe / square pipe / circular pipe) with requisite cross

bars, nuts and bolts, etc. shall be Hot deep galvanized with minimum 80micron

coating. The Rectangular / square /circular hollow pipe section used for the

structure should have a minimum thickness of 2.0 mm. other than above, the

material thickness should be minimum 2.5 mm. A certificate of a structural

engineer certifying the strength and stability of the mounting structure to withstand

the weight and wind speed of 150 km/hour throughout the life span of 25 years of

the system, shall be submitted by the vendors. Hot Dipped Galvanized steel coils.

suitable arrangement for base plate for foundation , solar panel mounting, the

structure should be suitable for carry the load of solar panel,wiring, sprinkler

system etc. with necessary foundation work/wall mount, j bolt, anchor fastner etc.

the nut bolt used for installtion of stucture should be (SS 304) quality.The ground

clearance of the bottom most edge of solar panel shall not be less than 300 mm to

1200 mm or as per site’s technical/feasibility requirement.

a. Column –The minimum section (thickness) should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section (thickness) should be 40MM * 40MM Balane of

System with necessary Swichgears (Suitabel size and protection of ACDB &

DCDB), inter connecting wiring, earthing system as per the CEIG drawing

approval, lightining arrester system as per the CEIG drawing approval, all liasoning

work with various gov. dipartment like state nodal agency,DISCOM & CEIG is

included in agency scope

(C ) Grid Tied Solar Power System: 11 - 25 kW

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

2 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) meter 500 369

3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) meter 250 215

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the

fault all over the run and back filling the same and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for

4 laying any size of cable or locating the fault all over the run and back filling the same and meter 150 62

making the surface as normal ground.

(B) If additional machinery like hammer driller or JCB use [Add] meter 750 295

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable (A)50 mm outer dia

50 mm outer dia meter 0 62

90 mm inner Dia. meter 500 95

120 mm inner Dia. meter 250 136

Supply of Approved make Iron Clad or metal clad four pole change over switch 415V.

confirming to IS of following capacity

ESTIMATE FOR ELECTRICAL WORK- AHMEDABAD AMRITKAL PARK

SUBHEAD:WATER COOLER & RO

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A SCHEDULEITEMS

WATER COOLER & RO

Providing & Erecting full SS Body (SS 304) Split type water cooler having storage capacity 160 to

Ltr.(Tank SS 304) & Cooling capacity 150 ltr. Per hour @ an ambient temp of 350 C.The outlet temp.

of the water should drop by 150C within a hour,The water cooler should be comprising of

hermetically sealed Reciprocating compressor with R134A, fan motor, Copper Condensing unit with

company fabricated Outdoor Unit water tank surrounded by evaporating coil, thermostats, relay

etc.complete with necessary copper tube & Insulation, M.S Chanel Stand with Painting for

water tank & M.S. Powder Coated Stand for Outdoor unit with Installation. With DPELCB and 4 Way

DB Box with accessory Three core Cord for connection.

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder

coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable

buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter auto low & high

pressure switches with following size of storage tank & LPH capacity & erected as directed

[C] 50 Ltr / Hr with 150 psi 2 nos booster pump Each 1 24153

TOTAL FOR LIGHT FIXTURE CARRIED OVER TO SUMMARY