Construction of New National Academy of Customs Indirect Taxes and Taxes and Narcotics (NACIN) under Phase-1 at Palasamudram Anantapur District Andhrapradesh

PLATFORM WEIGHING SCALE (SS PLATFORM): Supply, Installation, Testing & Commissioning of PLATFORM WEIGHING SCALE Weighing Scale of Capacity: 300 kg, Display Type: Digital Bright RED LED, Display Size: 12.5 mm High, Pan Size: 600 x 600mm (S.S), Features: Sigma delta A/D conversion providing 200,000 internal counts, Counting Function , Higher Lower limits, Sturdy mechanical Structure, Anti Corrosive Body, Over load alarm, Check Weighing Function , Auto Accumulation Function, Built in Chargeable Battery Backup minimum 15Hours, Battery saving mode, Anti Vibration Mode, Water resistant durable keypad, Overload protected upto 150% of cap....etc As per direction of Engineer -in – charge. Tentative Dimensions- (L X B X H )-( 600 X 600 X H).

SORTING SUNKEN TABLE WITH CROSS SUPPORT & REAR SPLASH: supply, Installation, Testing & Commissioning of SORTING SUNKEN TABLE Top construction of 16G 304 sheet. Front and both sides turned up 25 mm at 45 degrees, turned out 25 mm, turned down 50 mm and in 15 mm & 150 mm high raised splash adjacent to wall, returned 25 mm at 90° and turned down 12 mm and reinforced with welded SS channel support on sides and centre of size 12 x 46 x 75 x 46 x 12mm or 32 x 32 x 3 mm SS angle frame. Dia 25 mm drain outlet on one side corner connected to waste outlet. One 18 G 304 SS bottom shelf with hat type 18SWG SS channel support of size 12 x 37 x 75 x 37 x 12mm, starting at 150 mm height. Four no’s Dia 38mm 16G 304 SS round pipe uprights with nylon adjustable bullet feet ..etc As per direction of Engineer -in - charge . Tentative Dimensions - (L X B X H )-( 2100 X 600 X (850+ 150 ).

SS STORAGE PALLETS: supply, Installation, Testing & Commissioning of SS STORAGE PALLETS Constructed with 40 mm SS square pipe of 16 SWG (304) with internal grid of 32 mm SS square pipe.40 mm square pipe of 16 SWG (304) SS legs with 25 x 25mm 16G SS 304 cross support all side at 150 mm height, nylon adjustable bullet feet ..etc As per direction of Engineer -in - charge. Tentative Dimensions - (L X B X H )-( 1500 X 600 X 300).

SS STORAGE RACK (5 TIER): supply, Installation, Testing & Commissioning of SS STORAGE RACK (5 TIER) 5 Nos of SS 304 18 SWG Shelves, all side turned down 32 mm and in 12 mm. Underside of shelves reinforced with 12 x 28 x 75 X 28 X 12 mm 18 SWG 304 SS inverted hat type channels. Cut-out on all corners of shelves and to be welded to the centreline of uprights. All ends closed, welded, ground and polished smooth. Four no's of dia 38 mm 16 SWG 304 SS tubular upright with adjustable nylon bullet feet. Top end of the uprights should be closed with nylon end cap ..etc As per direction of Engineer -in - charge. Tentative Dimensions - (L X B X H )-( 1460 X 550 X 1800).

SS STORAGE RACK (4 TIER), UNDER SPACE FOR 3 NOS FLOUR BIN: supply, Installation, Testing & Commissioning of SS STORAGE RACK (4 TIER) 4 Nos of SS 304 18 SWG Shelves, all side turned down 32 mm and in 12 mm. Underside of shelves reinforced with 12 x 28 x 75 X 28 X 12 mm 18 SWG 304 SS inverted hat type channels. Cutout on all corners of shelves and to be welded to the centerline of uprights. All ends closed, welded, ground and polished smooth. Four no's of dia 38 mm 16 SWG 304 SS tubular upright with adjustable nylon bullet feet. Top end of the uprights should be closed with nylon end cap, bottom provided space for flour bins ..etc As per direction of Engineer -in - charge. Tentative Dimensions- (L X B X H )-(1460 X 550 X 1800)

FLOUR BIN UNDER STORAGE RACK: supply, Installation, Testing & Commissioning of FLOUR BIN UNDER STORAGE RACK of 18 SWG 304 SS, top 18SWG 304 SS split type hinged lid with handle, Bottom of the bin reinforced with SS channel support & provision for fixing 4 nos 100mm dia rubberised castor wheels ..etc As per direction of Engineer -in - charge. Tentative Dimensions - (L X B X H )-( 400 X 600 X 600).

BUSSING TROLLEY: supply, Installation, Testing & Commissioning of BUSSING TROLLEY Two (2) tray type shelves of 16 SWG 304 SS, to be reinforced with channels 16 SWG SS 304 of size 12 x 18 x 75 x 18 x 12 mm . All two shelves to be equidistant. 32 mm dia 16SWG 304 SS pipes to extend and bended on top as handle at 100 mm clear height from the top shelf. 4 nos 100 mm diameter all swivel rubberised casters with 2 nos break mounted on bottom shelf with necessary channel support & fittings ..etc As per direction of Engineer -in - charge. Tentative Dimensions - (L X B X H )-( 1000 X 600 X 900).

PLATFORM TROLLEY: supply, Installation, Testing & Commissioning of PLATFORM TROLLEY 2MM SS Top platform double beaded on all sides 50 mm down and 15mm in, platform welded to 32 mm X 32 mm x 3 mm thick S.S. angle frame with side and centre support , 32diameter MM 16SWG 304 SS Pipe upright & handle, upright to be extended bottom of the platform and welded, corners to be protected with rubber bumpers. Fitted on all swivel 150MM diameter heavy duty PU wheels (2 Nos, with brake) ..etc As per direction of Engineer -in - charge. Tentative Dimensions - (L X B X H )-( (900) X 600 X 1000+100).

HAND WASH SINK KNEE OPERATED WITH CUSTOM FABRICATED FAUCET (WALL MOUNTED): supply, Installation, Testing & Commissioning of HAND WASH SINK Top construction of 16SWG 304 SS sheet. Front and both sides turned up 25 mm at 45 degrees, turned out 25 mm, turned down 50 mm and in 15 mm. Rear turned up 150 mm, returned 25 mm and down 12 mm. Reinforced with welded SS angle frame of size 25 x 25 x 3 mm. Sink size of dia 310 x 160 mm deep integral with top, with 1 no 38 mm diameter drain coupling. Front 18SWG 304 SS knee operating panel with push valve to operate, Single spot deck mounted water faucet. 16 SWG 304 SS pipe brackets reinforced with top with holes for mounting on wall ..etc As per direction of Engineer -in - charge. Tentative Dimensions - (L X B X H )-( 450 X 450 X (300+150).

POTATO PEELER 20KGS PER BATCH: supply, Installation, Testing & Commissioning of POTATO PEELER AISI 304 stainless steel body, transmission system with self-tensioning belt Pivoting High efficiency ventilated motors for continuous operation, stainless peeling disc, PP abrasive walls with easily replace able mantle by the operator, exhaust system automatically peeling time below 90 sec per batch potatoes, exhaust vent in stainless steel with quick and sealed locking. As per direction of Engineer-in-charge ..etc As per direction of Engineer -in - charge. Tentative Dimensions - (L X B X H )-( 500 X 400 X 900).