Construction of Urbun Plaza building at TP 213(Bodakdev),FP 144,in Bodakdev Ward, North West Zone of AMC.

Name of Work:- Construction of “Urbun Plaza” at TP 213(Bodakdev), FP 144, in

Bodakdev Ward, North West Zone of AMC.

DESCRIPTION AMOUNT

1 Structure Work ₹

2 Civil & Landscape Work ₹

3 Electrical Work ₹

4 Plumbing Work ₹

Total Amount Of Development For Urban Plaza ₹

Total Amount Of Development For Urban Plaza ₹

I/We am/are willing to carry out work at % above / below (should be written in figures and

words) the estimated cost mentioned above. The amount of my/our tender works out as

Estimated cost put to tender : Rs. Estimated cost put to tender : Rs.

Add____________% above Rs. Subtract____________% below Rs.

Total Rs. Total Rs.

In Words Rs. In Words Rs.

Signature of contractor Add. City Engineer

(Building Projects)

Seal Ahmedabad Municipal Corporation

DESCRIPTION UNIT RATE QTY. TOTAL

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the

1 excavated stuff upto 50 Meter lead. Cum ₹ 115.92 1,025.20 ₹

(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and

2 disposing off the excavated stuff upto 50 Meter lead. Cum ₹ 128.52 236.50 ₹

(A) Loose or soft soil

Excavation for foundationfor depth from 3.0m to 5.0m including sorting out and stacking of useful materials and

3 disposing off the excavated stuff upto 50 Meter lead. Cum ₹ 141.11 73.70 ₹

(A) Loose or soft soil

Extra for additional depth more than 5.0 m for excavation for foundation including sorting out and stacking of useful

4 materials and disposing of the excavated stuff upto 50 m lead. Cum ₹ 20.91 73.70 ₹

(A) Loose or soft soil

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding

20 cm. in depth consolidating each disposited layer by ramming and watering.

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- hand broken stone aggregates

mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and

7 reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. Cum ₹ 4,238.04 45.00 ₹

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts, upto floor two level.

Providing and laying in position Ready Mixed M250 grade concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of

work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying,

9 excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended Cum ₹ 4,853.56 296.40 ₹

proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS

shall be maintained) (Cement level 450 kg )

Providingand laying inposition Ready Mixed M300 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batchingplant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous agitatedmixer, manufactured as per mixdesign of specified

grade for reinforcedcement concretework includingpumpingof R.M.C. from transit mixer to site of laying,excluding the

10 costof centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions Cum ₹ 5,043.66 60.95 ₹

asper IS: 9103 toaccelerate/ retard setting of concrete, improve workability without impairing strength and durability

as per direction of the Engineer- in- charge.Without FlyAsh (Min cement level as per latest IS 456 shall be maintained)

(Cement level 475 kg )

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting

and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal

of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc.

and Mass concrete.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting

and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal

of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square

Rectangular Polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting

and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal

13 of the same for in situ reinforced concrete and plain concrete work in. (C) Verticalsurfacesuchaswalls (any thickness) Sqm ₹ 229.95 120.00 ₹

partitions and the like including attached buttresses & string course & the like.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting

and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal

of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of supspened

floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting

and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal

15 of the same for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Sqm ₹ 192.15 609.00 ₹

Haunchings cantilevers Girders Bressumers

and Lintels not exceeding 1 M. in Depth.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position

complete upto floor two level

CIVIL & LANDSCAPE WORK

ITEM DESCRIPTION UNIT RATES QTY AMOUNT

1) For more detailed description of any material or item contained in the BOQ, please refer relevant Specifications of Civil, Plumbing, Electrical, Fire fighting works. If the detailed specs for a

particular item is not contained in the Part‐II technical specification, the description given in the BOQ shall have to be referred.

2) All items mentioned in the tender shall be executed as per drawing/the instruction/direction of Architect/Engineer‐in‐charge.

3) The rate quoted for each items shall be considered as rate for execution of each item as per the specification, drawing or as directed by Engineer in charge in best workmanship way at all floors,

all levels and all heights. Sample shall be got approved from Architect & Engineer in charge prior to start the work.

DEMOLITION WORK

Demolition including stacking of serviceable material sand disposal of unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable

2 materials with all lead and lift. Sqm ₹ 53.55 5.00 ₹

ii) A.C. sheet roofing

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable

3 materials with all lead and lift. Sqm ₹ 47.25 5.00 ₹

i) G.I. sheet roofing

Demolition of brick work & stone masonry in cement mortar including stacking of serviceable materials and disposal of unserviceable

4 materials with all lead and lift. Cum ₹ 544.95 5.00 ₹

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable material as and disposal of unserviceable materials with all

5 lead and lift. Sqm ₹ 47.25 5.00 ₹

Dismentling steel work including distempering and stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc.

7 complete and stacking them within all lead and lift. Each ₹ 185.85 1.00 ₹

(ii) Not Exceeding 3 Sq.M. in area.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including stacking the materials with all lead and lift (for

8 any dia, of pipe) Rmt ₹ 74.03 10.00 ₹

Scraping oil paint from steel and other metal surface and making the surface even (with Hand Scraping)

Removing and scraping of old deteriorated plaster/Paint of any thickness fromm wall / R.C.C member including stacking of serviceable

10 material and disposal of unserviceable from site of work with all lead and lift. Sqm ₹ 19.38 116.00 ₹

Clearing and grubbing road land including up rooting rank vegetation grass bushes, shrubs, sapling and trees girth up to 300 mm removal of

stumps of trees cut earlier and disposal of unserviceable materials

(A) By manual means in area of light jungle

Excavating, Supplying, stacking and filling of local earth (including royalty) by mechanical transport upto any lead also including ramming and

watering of the earth in layers not exceeding 20cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.

Barricading the entire break down or excavated area on rental basis using wooden ballies / M.S.angles at max. 2.00 meter centre to centre, C.G.I.

Sheet, reflective paint / Board out side to avoid accident & for smooth traffic diversion & movement including cautionary board etc. Item also

13 includes for making temporary sufficient nos of lighting arrangement through out the work with necessary required arrangement. The same Rmt ₹ 79.99 228.00 ₹

shall be removed after completion of work. (Only for break down work from start to complete)

Conveyance charges of earth lime, murrum, building rubbish, manure, garbage, sludge, excavated rock, fly ash, aggregate of any kind etc. comp.

upto any lead upto 1.0 km

a) Lead From 1 Km to 2 Km. Cum ₹ 278.18 1.00 ₹

b) Lead From 2 Km to 5 Km. Cum ₹ 326.73 1.00 ₹

c) Lead From 5 Km to 10 Km. Cum ₹ 363.78 353.45 ₹

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including

labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight

one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

16 Mortar 1:5. (1- Cement : 5 -fine sand) Cum ₹ 4,011.66 357.00 ₹

(B) Conventional

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/Sqcm in super structure upto Any floor level

In cement mortar 1:6 (1 cement :6 fine sand)

(B) Conventional

18 Extra for brick work in superstructure above floor two level Item No.17 (B) Conventional Cum ₹ 4,452.41 90.00 ₹

Half brick masonry in common brunt clay building bricks having crushing strength not less than 35Kg/Sq.Cm.in Cement mortar 1:4 (1-Cement:4-

19 coarses) in Foundataion & Plinth Sqm ₹ 593.90 50.00 ₹

(B) Conventional

Half brick masonry in common brunt clay building bricks having crushing strength not less than 35Kg/Sq.Cm.in Cement mortar 1:4 (1-Cement:4-

20 coarses) in super structure Sqm ₹ 646.70 50.00 ₹

(B) Conventional

21 Extra for half brick masonry in superstructure above floor two level.(B) Conventional Sqm ₹ 652.64 50.00 ₹

Providing 10 mm thick cement plaster in single coat on for plastering on ceilings and soffits of stairs upto floor two level finished even and

smooth in [I] Cement mortar 1:3 (1 cement : 3 fine sand) including curing etc complete.

Providing and laying average 20 mm thick double coat Sand face/Mala cement plaster on internal/external walls upto any height above

ground level and for all shapes consisting of average 14 mm. thick backing coat of CM 1:3 (1 cement: 3 coarse sand) and average 6 mm. thick

uniform grained textured finish coat using wooden Gutka, in CM 1:1 (1 cement: 1 sand),with line , level & plumb, including scaffolding, forming

22 grooves, drip moulds, pattas, hacking RCC surface, curing etc. complete. as directed by EIC. Rate shall be inclusive of hexagonal chickenmesh at Sqm ₹ 297.68 7,049.00 ₹

junction of concrete and brick work. Minimum width of the chicken mesh shall be 150 mm covering the brick / concrete surface equally.

Providing and applying Solitaire Granite/Stone Texture finish in two coats over prepared exterior wall surfaces, including thorough surface

preparation such as cleaning, removing loose particles, algae/fungus treatment, filling cracks and undulations with approved fillers, leveling and

curing; applying one coat of suitable exterior primer (as recommended by the manufacturer); and finishing with Solitaire Granite/Stone texture

23 applied by spray/trowel in the required shade, thickness, and pattern as per architect’s selectio & direction of Berger Solitare or equivalent Sqm ₹ 1,857.00 4,808.00 ₹

make. The rate shall include all materials, labour, scaffolding, masking and groove work (if required), curing, finishing, touch-ups, protection of

adjacent surfaces, and complete cleaning of site, all as per manufacturer’s specifications and instructions of the Engineer-in-Charge.

Measurement shall be on the finished surface area, excluding openings unless otherwise specified.

Providing and applying Terre Grit or Similar, a pure acrylic emulsion-based special wall texture made from coated marble sand and chips, in a

thickness of 1mm to 2mm using a steel trowel finish in Earthen/Coral/Spectrum shade as approved by the architect/engineer. The application

includes a three-coat system: first, one coat of base primer (50µm–60µm) of the required colour applied using a brush or roller; second, one coat

of Terre Grit texture (1mm–2mm) applied with a steel trowel to create the desired pattern; and third, one coat of clear matt or gloss finish top

coat (30µm–40µm) to enhance durability and appearance. The texture is to be applied over a smooth, mala plastered surface. All materials used

should be as per approved specifications and applied by skilled labour following proper surface preparation and drying times. Texture selection

shall be finalized only by the architect, and a sample must be prepared and approved before execution is carried out.

Applying two coats of Birla or Asian acrylic lapy (putty) & two coats of primer of approved brand and manufacture on new wall surface to give

an even shade as directed by Engineer in charge.

25 Wall painting two coats of paint with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even Sqm ₹ 118.63 2,434.00 ₹

shade including throughly brushing the surface free from mortar dropping sand other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) + Primer Coat to give an required shape even shade after

26 thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials etc. complete Sqm ₹ 113.40 963.00 ₹

Providing and fixing premium or Good Quality machine cut, mirror polished/River finished average 18mm to 25mm thick Mirror/River polish

Granite of uniform size and colour for treads/ risers/ Skirting/ Flooring /wall cladding/Door Window Jambs/Parapet Top Using araldite,

Stainless steel Pins if required scrapping the surface and making the surface preparation for cladding. and skirting of stair, on coping, sill etc size

As per design, of approved shade, including necessary machine - cut edges (uniform thickness) rounded edges, as per design in required sizes

and shapes over 40 mm (average) thick bedding of cement mortar 1:6 (1 cement: 6 coarse sand) laid and jointed as per drawing & design with

white cement and matching pigment or fixed with stone fixing adhesive as per manufacturer's specifications including rubbing, mirror polishing

with different grades of Emery, refilling of open joints, curing, daily cleaning and mopping etc complete for all floor all level as per approved

sample by Architect, drawings and instruction of EIC.

Supply and installation of Artocrete Artezzzo or equivalent approved make, 12–14mm thick grey cement-based polished terrazzo topping with

selected marble chips of approved size, color, and quality. Terrazzo shall be installable on horizontal, vertical surfaces & Curved (flooring,

skirting, dado, staircases, wall cladding, etc.) with required Grooves as per drawings and site requirements. Terrazzo topping to be laid,

compacted, cured, and finished as per manufacturer’s specifications and good industry practice. Grinding and Polishing Initial rough grinding and

28 levelling. Finished surface should be smooth, non-porous, free from pinholes, and uniform in appearance. Work to be executed with proper Sqm ₹ 4,333.00 1,208.00 ₹

curing, protection, and cleaning until final handover. Rate to include with All materials, Installation, grinding, polishing, and finishing complete in

all respects, Labour, tools, equipment, curing, and protection until completion. Contractor shall prepare a sample panel (minimum 1m × 1m) of

proposed terrazzo work showing approved material, finish, and workmanship. Bulk execution shall commence only after written approval of the

sample by the Engineer / Architect.

Providing and laying Ceramic tiles 6mm thick in flooring of water tank laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse

29 sand ) finishing with flush pointing in white cement. Sqm ₹ 960.47 25.00 ₹

Providing and laying Ceramic tiles 6mm thick in wall of water tank on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed

30 with white cement slurry. Sqm ₹ 1,028.11 15.00 ₹

Providing & laying broken white china mosaic flooring for plain and curved surfaces, comprising of 12 to 20 mm. size broken pieces of white

glazed tiles laid over water proofing using cement mortar 1:3 bedding, The flooring shall be tampered to bring the mortar cream up to the

31 surface, including rounding of the junctions and extending them upto 30 cm. along the parapet wall. The rate shall include bands, if different Sqm ₹ 739.89 32.00 ₹

colour is used, any pattern or design as per drawing and direction, curing, cleaning with water and oxalic acid, etc. complete. as directed by EIC.

Providing Trimix with Dewatering machine and floater machine on constructed RCC work at entrance area incl. cost of machine and labour etc.

compas directed. (approved)

Providing and fixing Precast Kerb blocks of made of Vyara or equivalent of various types (Bull nose, Quadrant, Transition, Dropper, Half Batter,

Flat, offlet, etc.,) and size of 600x450x150mm steel mould Vaccum wet pressed for connecting roads, pathway-prominade area and other area

with true line & level, including grading, geometrical shapes in curves, circles etc. at respective finish level etc. completed as specified in drawing

33 and specification. It shall be of CC- M25 grade of concrete and fitted and jointed in C:M 1:1 with throughly curing, rendering with cement slurry, Rmt ₹ 1,752.00 206.00 ₹

cleaning the joints neatly etc. completed as directed by EIC. It allows to satisfy respective IS-codes for materials, manufacturing process and test

Providing and fixing 80 mm thick factory made of vyara or equivalent make Decastone Neo paver blocks of specified special colors, shade, size,

shape laid in patetrn with melange with premier shield coating approved by Architect, manufactured with cement concrete grade not less than

34 M-40 and conforming to IS:15658, including providing & laying 20 mm thick bedding of cement mortar (using ready mix mortar having cement: Sqm ₹ 1,927.00 533.00 ₹

sand, 1:4) finishing to line, level and slope, finally filling the joints with matching cement mortar and cleaning the surface etc. complete all as per

specification and as directed by the Engineer-in-Charge.

WATERPROOFING WORK

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of terraces &

terrace parapet consisting of following operations:

a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and

approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.

b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse

sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement

mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-

charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs

c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix

35 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-incharge including Sqm ₹ 944.00 103.00 ₹

laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and

making pattern of 300x300 mm square 3 mm deep.

d) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above

operations to be done in order and as directed and specified by the Engineer-in-Charge : (The work shall be carried out through approved

specialised agency and shall carry ten years performance guarantee. (Plan area should be measured. No extra payment shall be made for gola,

vatas, khurras, water spouts edges etc. ) With average thickness of 80 mm and minimum thickness at khurra as 65 mm. Rate includes for all lead

& lift & as per directed by EIC.

Waterproofing in Water Tank:

Providing cement based waterproofing treatment to the inside surface of water tank by giving injections to concrete bottom slab and walls with

cement and approved water proofing compound solution to fill up all inherent holes, voids, honey combs etc in concrete as per 'Injection &

Surface' method of the agency approved by the department using cement based waterproofing treatment of 50 mm and 25 mm thick for the floor

36 and walls respectively, of the overhead water tank on terrace / Underground water tank , finished perfectly smooth to correct line, level and Sqm ₹ 1,011.00 40.00 ₹

plumb including preparing the existing surfaces, necessary scaffolding, finishing smooth, curing etc. complete as per waterproofing agency's

specifications and testing water tank for the water tightness and rectification of defects, if any, to render the outer surface bone dry etc complete

as per specifications & as directed by the Engineer-in-charge.

(Note:- The measurement for payment shall be actual area covered by treatment)

Fabrication, inspection , erection and painting with 2 coats of enamel paint including applying primer for Miscellaneous structural steel

components confirming to IS: 1161: 1979 for the work of framing, trusses, railings, window grills, gate, staircases, supports, beams, columns,

ladders, angles, Plates, Flats, joists, etc. all kind of structures and any other similar items fabricated out of tubular sections, rolled sections, plate

sections etc. of standards specifications and drawings including plant & machinery, tools & tackles etc. , including site bolting, providing nuts &

bolts, anchor fasteners, (Supplied by vendor), welding, grinding, wastage etc. complete as per specifications, complete as directed by Engineer in

charge. (As per drawing)

DOORS & PARTITIONS

Providing and fixing flush door both sides laminated and I.T.W. beading all around by using I.T.W. frame 120 m.m. x 80m.m.. shutter fabricated

from 35 mm thick solid core malemine faced three layered pre laminated flat pressed wood based exterior grade bonded BWP/BWR synthetic

resin having stamped IS 12823 grade I type II including three coats of lacquer polishing to exposed wooden surfaces and Stainless steel

decorative type designs fixtures / fastening 2Nos. Handles, 2Nos. Aldropes, towerbolt, Lock Door Closer etc.including I.T.W. triangular batten

patti of size 30m.m.x30m.m.etc. as per architectural detailed drawing and as directed by engineer in charge.

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.

39 limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses. Sqm ₹ 719.93 4.00 ₹

(1) 0.80 mm thick sheet.

Providing and installing floor/ mounted dustbins with led for dry waste and wet waste with proper marking of Sintex, nilkamal, Prince or

40 equivalent. Dust bin shall be one Piece Moulded, Heavy Duty Waste Bin of approx. 60 Litres capacity made out of FDA approved virgin grades of Nos. ₹ 4,341.25 20.00 ₹

P l th l t i l f t df R t ti l M ldi P / Bl M ldi P b l t l th d it h i l

Providing and laying natural colorful small pebbles of size 8–20 mm, smooth, washed, and free from silt, clay, or organic impurities, for use in

41 planters, garden beds, and decorative areas as directed. The work shall include surface preparation by clearing and leveling the base, application ton ₹ 4,025.00 240.00 ₹

f t til b dl if i d l d li d l di f l/ bbl t it d di l th

Providing and fixing FRP/GRC Sculpture of sphere made out of desired material as directed by Architect and as per approved sample. Sculpture

42 shall be fixed with required civil work as per site condition. Rate shall be for sculpture and all activity required for installation of sculpture. Rate Nos. ₹ 35,442.00 3.00 ₹

Wall Art of mural in Corten Steel IRSTM GRADE for exteriors with hand work from artisians and machining both involved and installations as

43 per the design etc. complete with necessary requirements & works as per manufacturer specifications & as directed by EIC/Architect. Sqm ₹ 21,185.76 10.00 ₹

Signage with pole - SS Plate Size : 12" x 8" - Grade 304, Brush Finish, 2mm Thickness with Smoothen Corner edges, Acid etching with duco

44 colour, Logo cutting in waterjet CNC machine, Supported at 45 degree Pole 1' long Single pole, 50mm square MS pipe with Zinc coating & Paint, 1' Nos. ₹ 3,000.00 10.00 ₹

d F d ti ith t k&T t ti

Providing and fixing Signages made from S S 304 in 1 mm thick SS plate with eateching as per design and filling the black or any color as per

45 requirnmnet of architects with any size with fitting and Including all accessories, material & labor complete as directed by Architect / Engineer – Sq.inch ₹ 56.00 7,000.00 ₹

Designing, providing & Installing M.S. Sculpture (2D/3D). The rates includes preparation of workshop drawing, 3D visuals (2-3 Options

46 minimum), polishing , duco paint (multi colour) and on-site finishing works etc. complete with transportation & installation. Nos. ₹ 4,00,000.00 3.00 ₹

) F Si 5'0" t 8' 0" A A hit t S l ti

Providing and Fixing of અમદાવાદ યુિનિસપલ કોપ ર ેશન TEXT in gujarati letters with use of SS-304 Grade Material including fixing of the same at

47 proper place (300-600 mm height) as per Architect design. Nos. ₹ 68,750.00 1.00 ₹

Providing and fixing Signages made from vinyl pesting on 5 MM thick foam sheet with any multi color printing as per requirnmnet of architects

48 with any size with fitting and Including all accessories, material & labor complete as directed by Architect / Engineer–in–charge Signages on Sqm ₹ 2,300.00 50.00 ₹

Garden Map Signage - SS Plate Size : 4' x 2' - Grade 304, Brush Finish, 2mm Thickness with Smoothen Corner edges, Acid etching with duco

49 colour, SS Studes 1.5" - 6pcs for fitting & Transportation. Nos. ₹ 24,000.00 10.00 ₹

Area Signage - SS Plate Size : 4' x 2' - Grade 304, Brush Finish, 2mm Thickness with 1.5" Banding, Title Name in waterjet CNC Cutting Sub title

50 name in Acid etching with duco colour, Backside ISI Certified Stripe LED Light fitting & Transportation. Nos. ₹ 32,000.00 10.00 ₹

Directional Signage - SS Plate Size : 30" x 8" - Grade 304, Brush Finish, 2mm Thickness with Smoothen Corner edges, Acid etching with duco

51 colour, SS Studs 1.5" away from wall - 2pcs for fitting & Transportation. Nos. ₹ 5,000.00 10.00 ₹

Providing, supplying, and installing precast concrete bench of rectangular profile with central arch opening as per design, size approximately

1500–1800 mm long, 450–500 mm wide, and 450–500 mm high, cast in M-30 grade reinforced cement concrete, machine vibrated and

compacted for dense and durable finish. The bench shall be cast in steel moulds to achieve smooth shutter finish with rounded edges, adequately

52 reinforced with TMT bars conforming to IS 1786 with proper cover, and provided with lifting hooks for safe handling and placement. The bench Nos. ₹ 4,025.00 20.00 ₹

shall be installed at site over a compacted PCC (M-10 grade, 75–100 mm thick) base including proper leveling, alignment, finishing, curing, and

all leads and lifts. The quoted rate shall include cost of moulds, reinforcement, concrete, finishing, transportation, handling, and installation

complete as per design and engineer’s instructions.

Excavation for foundation by mechanical / manual means in all kind of soils & soft rock up to 0.9mt x 0.9mt x 1.5mt depth including backfilling,

53 shoring, strutting dewatering as necessary, sorting out and stacking of useful materials and disposing of the surplus excavated material within Cum ₹ 115.92 1,467.00 ₹

campus etc complete all as per specifications and as directed by EIC.

Providing, Supplying, Stacking, Mixing, Filling, Spreading, Grading, Cleaning & Removal of stone, gravel, plants & roots, branches, etc. at sub-base

level including spraying of Anti-termite chemical as per manufacturing specifications at bottom and sides of pits, trenches, engineered soil etc.

complete with watering. Engineered soil consisting of selected soil or murrum or agricultural soil brought from out side including compensation

for Good Soil / Agricultural Soil, Selected graded River sand & Organic manure should be well rotten and of standard quality ( all three as

selected by Architect only ), in proportion of 60%,20% & 20% respectively. Contractor shall follow detailed drawing and provide workmanship

like manner for prior approval & under supervision qualified Horticulture having 10 years experience. It allows for uproot, polving, weeding etc.

for at least twelve months of after final plantation including watering. Excavation for trenches and pits shall be paid extra under relevant item.

Measurement shall be as per drawing size including volume of poly bag size. The pit size for tress and palms is 0.9 m x 0.9 m x 0.9 m and

excavating depth for Shrubs is 450 mm and for Ground cover 300 mm.

Supply of Shrubs - well developed, well branched - 3-4 branches each having 10-12 leaves, preferably in bloom, in polybag of 30x20cm size,

disease free and development (height 0.75-0.9m) Shrubs are woody perennials of generally multi stemmed and bushy habit ranging from 3 -

4.5m down to 500mm height. Shrubs shall have no less than three main stems and shall be well balanced and bushy, with strongly developed

fibrous root systems, and shall be pruned in advance as required to achieve the specified height tolerances. Branches shall break from the base of

the plant just above the root collar, and shall be well furnished with leaves right down to ground level. Supply shall include labour & equipment

cost of loading, unloading, transport to site, storage & stacking within site in area protected from dust using temporary agronet, watering &

maintenance at stacking area until planted as directed by EIC (Defect liability for supply against disease, improper growth, crooked shape shall

Allamanda nerifolia (ALNE) [0.6 m] Nos. ₹ 32.20 125.00 ₹

Alocasia macrorrhiza (ALMA) [0.6 m] Nos. ₹ 59.80 80.00 ₹

Arundo donax (ARDO) [0.6 m] Nos. ₹ 43.70 125.00 ₹

Canna indica (CAIN) [0.6 m] Nos. ₹ 28.75 150.00 ₹

Canna indica variegated (red) (CAIN.V.R) [0.6 m] Nos. ₹ 28.75 150.00 ₹

Canna indica variegated (yellow) (CAIN.V.Y) [0.6 m] Nos. ₹ 28.75 150.00 ₹

Carrisa carandas (CACA) [0.6 m] Nos. ₹ 31.05 34.00 ₹

Chlorophytum cosmosum (CHCO) [0.6 m] Nos. ₹ 27.60 167.00 ₹

Crinum asiaticum (CRAS) [0.6 m] Nos. ₹ 40.25 150.00 ₹

Dodonaea viscosa (DOVI) [0.6 m] Nos. ₹ 40.25 125.00 ₹

55 Dracena mahatma (DRMA) [0.6 m] Nos. ₹ 40.25 125.00 ₹

Duranta repens (DURE) [0.6 m] Nos. ₹ 13.80 261.00 ₹

Eranthemum tricolour (ERTR) [0.6 m] Nos. ₹ 32.20 125.00 ₹

Hibiscus mutabulis (HIMU) [0.6 m] Nos. ₹ 32.20 125.00 ₹

Hibiscus rosa-sinensis dwarf (mix colours) (HICO) [0.6 m] Nos. ₹ 32.20 125.00 ₹

Hibiscus tiliaceus (HITI) [0.6 m] Nos. ₹ 34.50 125.00 ₹

Murraya exotica (MUEX) [0.6 m] Nos. ₹ 28.75 150.00 ₹

Nerium indicum (NEIN) [0.6 m] Nos. ₹ 28.75 125.00 ₹

Pandanus dwarf variegated (PAVA) [0.6 m] Nos. ₹ 48.30 200.00 ₹

Russelia equisetiformis (RUEQ) [0.6 m] Nos. ₹ 28.75 200.00 ₹

Thevetia peruviana (THPE) [0.6 m] Nos. ₹ 27.60 167.00 ₹

Vinca alba (VIAL) [0.3 m] Nos. ₹ 27.60 167.00 ₹

Vinca rosea (VIRO) [0.3 m] Nos. ₹ 27.60 167.00 ₹

Succulents List

Agave variegata (AGVA) [0.45 m] Nos. ₹ 63.25 67.00 ₹

Sansevieria trifasciata (SATI) [0.45 m] Nos. ₹ 74.75 67.00 ₹

Ophiopogon japonicus (OPJA) [0.45 m] Nos. ₹ 32.20 67.00 ₹

Pennisetum rubrum (PERU) [0.6 m] Nos. ₹ 25.30 67.00 ₹

Pennisetum setaceum (PESE) [0.6 m] Nos. ₹ 25.30 67.00 ₹

Supply of Trees - well developed, well branched crown 4-6 branches each having 4-5 leaves, well developed (Poly bag size - 18"x 18", min. stem

diameter 50mm and height as specified) Trees shall be large size nursery grown trees pruned during growth to produce a tight well rounded

head and a straight stem clear of leaves or twigs. Trees shall be at least two years old, as certified by the nursery. Trees shall be 70-100 mm

circumference stem when measured 1.0m from ground level and shall have a clear straight stem of minimum 1.2m. The head shall be well

balanced and rounded and contain at least four main branches with a well-developed secondary branch system and a defined central leader that

has not been pruned, giving a minimum overall height of 1.5m at the time of planting. Rootball dimensions : diameter 400mm x 400mm deep

minimum. Branching/leaf spread 1.5 - 1.8m diameter. Pruning at the time of removal from the nursery will not be permitted. In dry weather

conditions, trees are to be sprayed with approved Anti-transpirant. Trees shall have a strong fibrous root system. Supply shall include labour &

equipment cost of loading, unloading, transport to site, storage & stacking within site in area protected from dust using temporary agronet,

watering & maintenance at stacking area until planted as directed by EIC. (Defect liability for supply against disease, improper growth, crooked

shape shall be 2 years)

Barringtonia racemosa (BARA) [1.2 m] Nos. ₹ 316.25 20.00 ₹

Cordia sebestena (COSE) [1.2 m] Nos Nos. ₹ 258.75 20.00 ₹

Ficus benjamina (FIBE) [1.2 m] Nos. ₹ 258.75 20.00 ₹

Holoptela integrifolia (HOIN) [1.2 m] Nos. ₹ 316.25 20.00 ₹

Peltophorum pterocarpum (PEPT) [1.2 m] Nos. ₹ 230.00 20.00 ₹

Plumeria alba (PLAL) [1.2 m] Nos. ₹ 230.00 20.00 ₹

Plumeria obtusa (PLOB) [1.2 m] Nos. ₹ 287.50 20.00 ₹

Pongamia pinata (PNPI) [1.2 m] Nos. ₹ 230.00 20.00 ₹

Spathodea campanulata (SPCA) [1.2 m] Nos. ₹ 253.00 20.00 ₹

Tabebuia rosea (TARO) [1.2 m] Nos. ₹ 287.50 20.00 ₹

Tamarindus indica (TAIN) [1.2 m] Nos. ₹ 230.00 20.00 ₹

Terminalia arjun (TEAR) [1.2 m] Nos. ₹ 34.50 20.00 ₹

Supply and planting of Ficus panda, Ficus benjamina variegated, Ficus longisland bag size is 13 inch x 13 inch, well branched, well

established & free from disease at site as per the instructions.

Supply and planting of (Ixora, Ticoma Gaudi‐chaudi, Gultora, Jetropha, Chandani, Mogaro, Galfemia, , Allamenda, Desi Gulab, Euphorbia

mili, Jasud Hybrid, Chandani double, Madhukamini, Madhumalti, Ticoma Capensis, Ixora draft, Nikadevia, English Karen etc.) having

Supply and planting of Diff. Varieties of Palm (Botal palm, foxtel, travelling palm, fish tail palm, royal palm, golden cane palm, etc.) having

height of minimum 10.00 to 12.00 ft. and bag size is 25 inch x 25 inch, well branched, well established & free from disease at site as per the

Supply and planting of champa (deshi) having height of minimum 8 to 10 ft. and bag size is 15 inch x 16 inch, well branched, well established &

free from disease at site as per the instructions.

Supply saplings of champa (deshi) well branched, well established & free from disease at site as per the instructions. having height of minimum

10 to 12 ft. bag size is 18 inch x 18 inch.

Supply saplings of champa (Red) well branched, well established & free from disease at site as per the instructions. having height of minimum

10 to 12 ft.bag size is 18 inch x 18 inch.

Supply saplings of Son champa (Grafted) well branched, well established & free from disease at site as per the instructions having height of

minimum 10 to 12 ft. bag size is 18 inch x 18 inch.

Supply saplings of Tarminaliya (Mentalii) well branched, well established & free from disease at site as per the instructions. having height of

minimum 10.00to 12.00 ft. bag size is 18 inch x 18 inch.

Supply saplings of Bougain villea Glabra, Bougain villea tach gloriy, Bougain villea Formosa well branched, well established & free from

disease at site as per the instructions height of minimum 4.00 to 5.0 ft bag size is 13 inch x 13 inch.

Supply saplings of ground cover of species specifies (Wedelia trilobata, Altranenthra 3 varieties, Iresine, Verbena, var., chlorophytum, etc.)

well branched, well established & free from disease at site as per the instructions. bag size is 6 inch x 4 inch.

Supply saplings of species specifies (Lantana, Red Fountain Grass, Green Fountain Grass, Sensiveriya, Porchuleca, Pedilenthas, ketki, etc.)

well branched, well established & free from disease at site as per the instructions bag size is 6 inch x 8 inch.

Supplying best quality healthy Creepers species (allamanda, paras, madhu malti, Railway Creepers, Jai, Ticoma Creepers, etc.) as per the

instructions bag size is 8 inch x 10 inch.

Excavating pits of proper size and providing well grown seplings of big trees (Gulmohar, peltoforum, kordia, kadam, Saptparni,

Tebubiarosea, Borsalli, Spethodia, Neem, Parijatak, vad, pipal, Umro, Garmalo, Kathi Ambali, Jambu, Badam etc. as directed) having

Ficus Nitida, Golden or etc. toipiary (3-4 branch ready design) 21 inch x 21 inch bag size well established & free from disease at site as per the

Supply and planting of saplings of Hedge plants like kadvi mahendi, karmda, dyuranta, nikodeviya, etc. specifies bag size is 4 inch x 6 inch,

well established & free from disease at site. as per the instructions.

Supply of Palms - well developed, well developed, disease free (Poly bag size - 18"x 18") Palms shall have heights as either 1.2m-1.5m. For single

stemmed palms, the clear trunk height shall be atleast 80% of specified height, and stem girth shall be of dimension normally found for palms for

the stem height and species specified. Acceptable tolerances to variations in stem height shall be +200mm or -200mm from the height specified

in the Bills of Quantities. The heads of palms shall be well balanced with at least 7 leaves and a healthy growing apical shoot all free from pest

72 and disease. Rootball dimensions shall be 450mm diameter x 450mm depth.

(Defect liability for supply against disease, improper growth, crooked shape shall be 5 years)

Areca catechu (ARCA) [1.2 m] Nos. ₹ 632.50 5.00 ₹

Bismarckia nobilis (BINO) [1.2 m] Nos. ₹ 1,725.00 5.00 ₹

Cocos nucifera (CONU) [1.2 m] Nos. ₹ 862.50 5.00 ₹

Cycas revoluta (CYRE) [1.2 m] Nos. ₹ 2,875.00 5.00 ₹

Supply of Ground covers / creepers - well developed, min. 0.15m high, in polybag of 5"x7" size, disease free. All groundcover species shall be

evenly balanced to allow equal growth in all directions. Plants shall have fully developed roots and leaves. Rooted cuttings will not be accepted.

All plants to be container grown. Supply shall include labour & equipment cost of loading, unloading, transport to site, storage & stacking within

site in area protected from dust using temporary agronet, watering & maintenance at stacking area until planted as directed by EIC.

(Defect liability for supply against disease, improper growth, crooked shape shall be 5 years)

73 Alternanthera green (ALGR) [0.3 m] Nos. ₹ 17.25 75.00 ₹

Alternanthera variegated (ALVA) [0.3 m] Nos. ₹ 17.25 75.00 ₹

Asytasia coromandeliana (ASCO) [0.3 m] Nos. ₹ 17.25 50.00 ₹

Roheo discolor (RODI) [0.3 m] Nos. ₹ 23.00 100.00 ₹

Weddelia trilobata (WETR) [0.3 m] Nos. ₹ 6.90 200.00 ₹

Climber / Creeper

Bougainvillea spectabilis (BOSP) [0.3 m] Nos. ₹ 40.25 50.00 ₹

Quisqualis Indica (QUIN) [0.3 m] Nos. ₹ 34.50 75.00 ₹

ELECTRICAL WORK

Description of Work Unit Rate Qty. Amount

1 Main LT Panel for External Lighting as per attached SLD No ₹ 1,94,100.00 1.00 ₹

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity

ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to

2 work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in No ₹ 7,976.00 1.00 ₹

existing 16 G.M.S. housing.

ICS=100% of ICU only (Cat III)

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable

to following size of moulded case circuit breaker having CT ratio & MCCB rating as following along with

3 shunt trip 220V AC. with all internal connections & complete erected in existing M.S.housing.. No ₹ 4,934.00 1.00 ₹

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted

with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

4 MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) - No ₹ 3,836.00 2.00 ₹

Three phase 12 way SS Double door for horizontal single phase outgoing

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted

with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

5 MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) - No ₹ 3,379.00 2.00 ₹

Three phase 8 way SS Double door for horizontal single phase outgoing

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted

with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

6 MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) - No ₹ 1,478.00 2.00 ₹

Single phase 12 way SS Double door for horizontal single phase outgoing

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having

7 breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark ‐ SP MCB No ₹ 111.00 54.00 ₹

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having following capacity 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having following capacity 63 Amp.

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick

action & tripping with all advance feature & do not incorporate any electronic component. for following Max.

rating erected as directed 25 Amps.DP

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current

device having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time

11 conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, No ₹ 1,925.00 9.00 ₹

complete erected including all materials lugs screws etc. completed.

[b] 32A / 40A, 2 pole Single Phase Cat. II

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current

device having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time

12 conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, No ₹ 2,315.00 4.00 ₹

complete erected including all materials lugs screws etc. completed.

[c] 63A, 2 pole Single Phase Cat. II

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current

device having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time

13 conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, No ₹ 2,145.00 2.00 ₹

complete erected including all materials lugs screws etc. completed.

[e] 32A to 40 A, 4 Pole Three Phase Cat. II

Plastic enclosure fitted with DIN rail suitable for incorporating Three / Four Pole MCB.

Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be

erected as per IS‐2551.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with,

floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as directed.

Providing and erecting approved make light control unit suitable to operate on 230V +20% having

ON/OFF delay time of 30-50 seconds and having facility for Auto/manual system having two LDR lens to

17 intensity light having capacity of 5A complete erected on section pillar with pipe and stand. Supplying & No ₹ 4,998.00 2.00 ₹

erecting power contactor for time switch complete erected as per direction Cat III 4 pole 440V 40 Amp.

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the

run and backfilling the same and making the surface as normal ground.

Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides

with covering of 7. 5 Cms. layer of sand above & below cable (16 bricks per meter)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for

20 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following Rmtr ₹ 215.00 1175.00 ₹

size of cables.(a) 4 core 1.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)‐88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be

21 laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of Rmtr ₹ 269.00 1125.00 ₹

cables.(a) 4 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)‐88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be

22 laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of Rmtr ₹ 361.00 510.00 ₹

cables.(a‐1) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)‐88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be

23 laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of Rmtr ₹ 505.00 425.00 ₹

cables.(B) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)‐88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV.

24 to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(c) 4 core 10 Rmtr ₹ 139.00 1050.00 ₹

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

(A) 4 core 16 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

(B) 4 core 25 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables.

Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an

approved manner.

(E) 4 core 4 Sq. mm / 4 core 2.5 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc for following size of cables.

Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved

(E) 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc for following size of cables.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an

approved manner.

(E) 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an

approved manner.

(E) 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an

approved manner.

(E) 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an

approved manner.

(C) 3 & 1/2 core 70 Sq. mm

HEAT / FIRE RESISTANT COATING OF CABLE : Supply and apply intumescent based coating Hilti CP 678 on

cables/bunch cables & cable tray for at least 1 mtr in every 14 mtrs for horizontal runs and to entire length of

vertical runs . The coating shall have a density in the range of 1.2 to 1.4 Kg/ L. The coating shall be non‐toxic,

asbestos and halogen free and shall have good mechanical strength. The coating shall comply with IEC

part 3 (1992). The product shall carry test certificate for mold resistance rating of 0 as determined by ASTM

G21‐96. The product should have a VOC content of approx. 60 g/l as per LEED 2009 and should not have any

34 de‐rating effect on the cable. Manufacturer should submitt relevant certificates for mentioned attributes. Kgs. ₹ 3,690.00 30.00 ₹

Coating shall be carried out by approved machine spraying system which will yield uniform thickness & better

finish. Firestop installation shall be done by Hilti Accredited Firestop Speciality Contractor (HAFSC) and in

accordance with Hilti guidelines . Firestop Speciality Contractor needs to submitt work completition certificate

along with installation report through Hilti documentation Software CFS DM for periodic inspection &

maintenance purpose.

firestop foam Hilti CP 620 on both sides of wall, with minimum 2 hours fire rating when tested in accordance

with UL 1479/ASTM‐E 814, for horizontal openings in floors or slabs made of concrete/ masonry or Gypsum

after passing service lines like cable trays or cables/cable bundles. The expanding foam expands seven times

its volume to fill the cavity at the time of dispensing the material and shall fully cure within two minutes after

dispensing. The product shall be age tested as per Dafstb and DIBT standards. The product shall provide water

tightness when tested for W rating as per UL standards and shall carry test certificate for sound insualtion of

50 db when tested in accordance with ASTM E 90. The product shall carry test certificate for mold resistance

rating of 0 as determined by ASTM G21‐96 and shall have a VOC content of approx. 1.3 g/l as per LEED

The product shall be tested in accordance with IEC 60068‐2‐57:1999‐11 (Environmental Testing) as per Part 2‐

57: Test for Vibration‐Time‐history method and VERTEQII for seismic zone 4. The system shall be UL listed &

classified and product shall bear the UL and FM approval logo on the packing. The system shall be UL listed &

classified and product shall bear the UL & FM approval logo on the packing. If none of UL test certificate

comply with actual application, an EJ document prepared by a qualified personnel and based on nearest third

party tested & approved systems like UL test certificates & in accordance with IFC guidelines shall be

producted by manufacturer. A firestop submittal shall be produced by manufacturer , in accordance with

approved passive fire protection method statement, for technical approval. Firestop installation shall be done

by Hilti Accredited Firestop Speciality Contractor (HAFSC) and in accordance with Hilti guidelines and UL

system test certificates or approved EJ document. Firestop Speciality Contractor needs to submitt work

completition certificate along with installation report through Hilti documentation Software CFS DM for

periodic inspection & maintenance purpose.

36 Cable tray (4) 200 X 50 X 1.6 mm Thick Rmt. ₹ 580.00 40.00 ₹

Point wiring for Light Point / Bell with 2‐1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected

concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and

37 earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with No ₹ 445.00 60.00 ₹

textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.with medium class Rigid PVC pipe and accessories

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size in (a) with medium class Rigid

PVC pipe and accessories

Wire : (C) 3 wire 1.5 sq. mm

Additional Wire : Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth continuity of following size in (a) with medium

class Rigid PVC pipe and accessories

Wire : (D) 3 wire 2.5 sq. mm

Point wiring for secondary light point with 2‐1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection with primary

40 light with accessories erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet no ₹ 131.00 60.00 ₹

for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Point wiring for Two Way Controlled Light Point with 2‐1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are

of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be

erected concealed in / flushed on wall/ceiling ,complete with 6A Modular type switches and following type of

accessories erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front

plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling

rose or H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Point wiring for FAN with 2‐1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed

on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic

fan regulator with separately mounted and accessories with earth continuity of following type erected on

PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected

on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box,

43 single mounting base frame covered with textured / metallic front plate modules erected on / in wall / no ₹ 255.00 15.00 ₹

ceiling with following type accessories

Do - As - Above but for 6 A x 5 pin 250 Volt switched socket outlet point at convenient location. ( Plug &

Switch can be together or at different location )

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of

wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with

45 appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of no ₹ 704.00 20.00 ₹

[II] For 6/16A Plug with 2‐2.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections as directed

46 1 no. 6A/16A universal plug‐switch combined. No ₹ 1,122.00 8.00 ₹

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board having portable bell push

working on D.C. & bell on 230V A.C. supply with cells / battery

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM

[B] 380 mm dia 900 RPM

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with

49 inbuilt lowers & square frame. Ea ₹ 1,353.00 2.00 ₹

250mm with 1350 RPM Cat.II

Supply, Installation, Testing and Commissioning of Providing & erecting Approved make Ceiling Fan with

50 double ball bearing ISI mark with condenser A.C.230V 50c/s. 1200 mm. sweep complete, canopy erected on Ea. ₹ 1,581.00 2.00 ₹

existing hook or clamp with earthing

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for

fan complete with necessary 24/ O.20, 3 core flexible wire with earthing.

Providing and erecting 1.6 ‐ 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following

size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps

with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with

continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the

surface to match the wall/ceiling.

Supply and laying of 25 mm rigid PVC pipe of 1.6‐1.8 mm thickness

Providing and erecting 1.6 ‐ 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following

size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps

with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with

continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the

surface to match the wall/ceiling.

Supply and laying of 32 mm rigid PVC pipe of 1.6‐1.8 mm thickness

Providing and erecting 1.6 ‐ 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following

size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps

with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with

continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the

surface to match the wall/ceiling.

Supply and laying of 40 mm rigid PVC pipe of 1.6‐1.8 mm thickness

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of

55 following size to be erected as directed. Mtr. ₹ 46.00 351.00 ₹

e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of

56 following size to be erected as directed. Mtr. ₹ 77.00 300.00 ₹

h) 2.50 Sq.mm 3 core round PVC sheathed

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of

57 following size to be erected as directed. Mtr. ₹ 106.00 250.00 ₹

i) 2.50 Sq.mm 4 core round PVC sheathed

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of

58 following size to be erected as directed. Mtr. ₹ 126.00 200.00 ₹

j) 4.00 Sq.mm 3 core round PVC sheathed

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of

59 following size to be erected as directed. Mtr. ₹ 175.00 200.00 ₹

K) 4.00 Sq.mm 4 core round PVC sheathed

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with following sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size : 4 wire 4 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with following sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size : 4 wire 6 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of

62 pipe to be erected in / on wall / ceiling with 4 sq. mm copper conductor FRLS PVC insulated stranded wire of Rmtr ₹ 421.00 100.00 ₹

green colour for earth continuity of following size : 4 wire 10 sq. mm

Supply,installation, testing and commisioning of IP‐65 5W/Mtr, 12x12mm size , 250Lumen/Mtr Neon Flex ‐

Top & Side Bending LED Surface Mounted light with Neon Flex encapsulated with silicon which ensures the

Ingress Protection, Cost include External Electronic power supply for LED module at evenry 10Mtr Length

Supply,installation, testing and commisioning of Building Face Light CIRCULAR shape Wall‐Floor Mounted

face light IP‐66 30W, 2400Lumen, Body in circular shape 170mm dia and 176mm height made of high

pressure die cast aluminium with powder coating. Screen made of clear Tempered Glass & Silicon Gasket

between frames ensures the Ingress Protection & Visor Cover

Supply,installation, testing and commisioning of CIRCULAR GROUND BURIED LIGHT IP‐67 30W, 1950Lumen,

Body in circular shape 260mm dia and 179mm height made of high pressure die cast aluminium with powder

coating. Top cover in Stainless steel. Silicon Gasket between frames ensures the Ingress Protection wtith

seperate housing for wiring connection

Supply,installation, testing and commisioning of CIRCULAR GROUND BURIED STUD LIGHT IP‐67 1‐3W 15‐

30luman , Body in circular shape 100mm dia and 95mm height made of high pressure die cast aluminium with

powder coating. Top cover in Stainless steel & Screen made of Transparent Tempered

Glass. Silicon Gasket between frames ensures the Ingress Protection wtith seperate housing for wiring

Supply,installation, testing and commisioning of IP-65 12W LED 850Lumen Surface Mounted Wall light

67 with die cast aluminum 200mm Dia, powder coated housing, Diffused screen made of Acrylic, reflector, Silicon Ea ₹ 4,320.00 70.00 ₹

Gasket ensures the weather proof, and built in driver.

Supply,installation, testing and commisioning of 4Mtr Light Pole with Light Fixtures as below Light112 for

Luman output 4500Lm

Suitable for Post top mounting of 89mm dia Pole tope

Fixtures Made up of Upper Frame in Circular shape 403mm dia made of die‐cast aluminium grey color,

reflector made of aluminium sheet. Lower frame made of steel.Screen made of diffused tempered

glass.Silicone gasket between the upper and lower frames.

Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over‐ Voltage & Over‐

Current, with in‐built surge protection. Estimated LED Lifetime is L70‐50,000 hours minimum. LM 80 report

from LED Manufacturer should be submitted to support the same. Sample should be submitted for approval

from concerned engineer‐in charge.

Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC filament

winding machine using thermoset resin polyester/epoxy resin system) having minimum 62% glass content.

The pole should be in one piece and tapered round in shape, having smooth finish and should be totally free

from corrosion as well as non conductive & shock proof Pole should be provided with FRP Anchor Base and it

should be heavy duty, or MS Material duly painted with Epoxy paint.Pole should be flame retardant as per IS

6746. Resin used shall be UV resistance and pigmented. A highly weather resistant polyurethane coating shall

be applied to the pole after applying suitable primer system that ensures proper adhesion of the paint.

Minimum coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10%

69 of the length of pole for the given load“ Pole should be generally made as per the dimensional data, Ea. ₹ 9,696.00 74.00 ₹

performance criteria and some interchangeability features of poles as per standard ANSI C 136.20 latest

version or ASTM D 4923/01 including cable termination box with necessary accessories . The size of pole and

type of installation with foundation as per manufacturer details and site requirement are as below .

[D] Overall length of 4 Mtr. Average Thickness: 7mm.

Top/ Bottom OD Dia A/F 89/145 mm ± 2mm approx. Approx. Weight of Pole 19 kg approx. (Without Base)

Anchor Base (Size 250X250 & 12mm th.)

Providing M‐20 / 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cms. Deep in below ground level with plinth of 45 cms x 45 cms (or 45 cms dia x

70 cms) high upper ground level with necessary curing and finishing in approved manner. Ea. ₹ 801.00 74.00 ₹

( for 4 & 6 mtr pole)

Supplying and erecting LED Wall Up‐Down Light, NWL‐120D, 19‐21W, LED, 3000k, IP

Body in rectangular shape made of Extruded aluminium and finished with Pure Polyester powder coating in

Grey Colour. Protection screen in clear tempered glass with high impact resistance. Precise structure and

multi‐protection silicon gasket ensures ingress protection‐ IP

Height ‐ 260mm, Length ‐ 120mm, Width ‐ 120mm, Weight ‐ 1.5Kg.

LED source is of high efficacy COB. Electronic Driver which offers Protection against Short Circuit, Over‐

Voltage & Over‐ Current, CRI > 70, voltage input 240V. Estimated Lifetime‐L70 @ 50,000hours minimum.

LM80 report from LED Manufacturer should be submitted. BIS Certificate with manufacturer name same as

brand proposed should be submitted.

Sample Should be submitted for concerned engineer incharge for approval of light fixture.

Supply,installation, testing and commisioning of Bollord Piccolo Custom 10‐15W,LED,3000k, IP

Bollard: Body in box shape made of aluminium. Frosted screen ensures uniform lighting. Pure polyester

powder coating in customised colour Metallaic Grey. Silicon gasket ensures ingress protection‐ IP

Overall Dimensions‐Height ‐800mm, Width – 220mm, Depth‐85mm, Weight ‐ 3Kgs.

Power LED Module with high efficacy LED's on Printed Circuit Board with metal core plate. Electronic Power

Supply for LED Module,which offers Protection against Short Circuit, Over‐ Voltage & Over‐ Current, with in‐

built surge protection. Estimated LED Lifetime is L70‐50,000 hours minimum. LM 80 report from LED

Manufacturer should be submitted to support the same. Sample should be submitted for approval from

concerned engineer‐in charge.

Supply,installation, testing and commisioning of Bollord Bollord Pictor,10‐15W,LED,3000k, IP

Bollard: Body in box shape made of aluminium. Frosted screen ensures uniform lighting. Pure polyester

powder coating in customised colour Metallaic Grey. Silicon gasket ensures ingress protection‐ IP

Overall Dimensions‐Height ‐1000mm,Width – 125mm, Depth‐51mm, Weight ‐ 3.3Kgs.

Power LED Module with high efficacy LED's on Printed Circuit Board with metal core plate. Electronic Power

Supply for LED Module,which offers Protection against Short Circuit, Over‐ Voltage & Over‐ Current, with in‐

built surge protection. Estimated LED Lifetime is L70‐50,000 hours minimum. LM 80 report from LED

Manufacturer should be submitted to support the same.Sample should be submitted for approval from

concerned engineer‐in charge.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K - as per selection,

74 Luminaire efficacy> 110 lumens/watt ,LED efficiency-110 lumens/watt Ea ₹ 293.00 35.00 ₹

LED driver efficiency > 85 %

Occupany Sensor - Auto Dimaable

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used for luminaire. ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.

(iii) 18‐20 Watts, Surge ‐ 2KV,IP‐20, conventional 4 feet

Supply,installation, testing and commisioning of IP‐65 7W LED Spike light with die cast aluminum 300 mm

75 long spike, powder coated housing, reflector, toughened glass cover with LED lamp and driver. Ea ₹ 1,050.00 150.00 ₹

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K - as per selection,

Luminaire efficacy> 110 lumens/watt ,LED efficiency-110 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used for luminaire. ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.

(A) Tube Light with integral driver ‐ (i) 10 Watts, Surge‐2 KV, IP‐20,2 feet Cat‐lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

77 Luminaire efficacy> 85 lumens/watt , Ea ₹ 584.00 16.00 ₹

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

Circular shaped Surface Mount Downlight with provision for spring loaded mounting clips complete.IP20 ‐

(iii) 16‐20 watts, Surge‐2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

78 Luminaire efficacy> 85 lumens/watt , Ea ₹ 423.00 10.00 ₹

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

Circular shaped Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20 ‐

(ii) 11‐15 watts, Surge‐2 KV

Supplying and erecting LED Flood light fittings with High power White LEDs wattage of 1Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,

79 Uniformity ratio >0.45, Luminaire efficacy> 110 lumens/watt . LED driver efficiency > 85 %.CREE / OSRAM / Ea ₹ 6,028.00 20.00 ₹

PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( fittings required LM‐79

& LM‐80 certificates)

(B) Flood Light (IP‐65), Surge ‐4KV,Light must have 440VAC line supply protection. It should withstand

hours for 440VAC line supply

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same material at required depth in existing trench for

80 laying of cable. below ground / road surface for enclosing cable Mtr. ₹ 62.00 1751.80 ₹

(A)50 mm outer dia

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same material at required depth in existing trench for

81 laying of cable. below ground / road surface for enclosing cable Mtr. ₹ 73.00 1200.00 ₹

(B)63 mm outer dia

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same material at required depth in existing trench for

82 laying of cable. below ground / road surface for enclosing cable Mtr. ₹ 95.00 200.00 ₹

(C)90 mm outer dia

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode

consisting Pipe‐in‐Pipe Technology as per IS 3043‐1987 made of corrosion free G.I.Pipes having Outer pipe

dia of 50mm having 80‐200 Micron galvanising, Inner pipe dia of 25 mm having 200‐250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for following type of applications.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode

consisting Pipe‐in‐Pipe Technology as per IS 3043‐1987 made of corrosion free G.I.Pipes having Outer pipe

dia of 50mm having 80‐200 Micron galvanising, Inner pipe dia of 25 mm having 200‐250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with

84 high charge dissipation suitable for following type of applications. Ea. ₹ 4,546.00 2.00 ₹

(a) For Electrical Installation up to 440V in normal soil

Length of pipe ‐ 1 Mtr

Back filling compound ‐ 1 Nos Bag of 15 Kg.

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/

Transformer LT panel board, Motors etc. using proper clamp.

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base

frame covered with textured / metallic front plate , modules erected with necessary connection.

(8) Modem Jack for Computer Open RJ‐45 ‐ cat‐III

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction : [C] CAT ‐

Providing & Erecting approved make following size of TV Co‐axial flexible cable comprising inner conductor of

solid bare copper insulated with Foam PE & Secondary conductor made of poly ‐ Aluminium film bonded Al.

88 Braids @ suitable coverage overall sheathed with black PVC insulation. Mtr. ₹ 52.00 50.00 ₹

Providing and erecting 1.6 ‐ 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following

size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps

with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with

continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the

surface to match the wall/ceiling.

Supply and laying of 25 mm rigid PVC pipe of 1.6‐1.8 mm thickness (Same As Item E‐45)

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction : [C] CAT

Supply, Installation, Testing and Commissioning of 5 Megapixel IP Dome Camera, HD1080p,1/2.8" CMOS,

91 24 pcs LEDs, 20m IR, Indoor IR Eyeball, ICR, 0.1 Lux/F1.2, 12 VDC, Smart IR, DNR, DWDR, 4.0mm lens mtr ₹ 6,620.00 12.00 ₹

Supply, Installation, Testing & Commissioning of 2 Megapixel IP Camera, HD1080p,1/2.8" CMOS, 24 pcs

92 LEDs, 20m IR, Outdoor IR Bullet, ICR, 0.1 Lux/F1.2, 12 VDC, Smart IR, DNR, DWDR, IP66, 4.0mm lens nos ₹ 11,910.00 8.00 ₹

Supply, Installation, Testing and Commissioning of 16‐Channel Network Video Recorder recording with

93 10TB HDD with all require installation and integration with all camera system, 16 HD input, 16‐ch video, 4 nos ₹ 53,480.00 2.00 ₹

SATA interface, 1920×1080P With HDD with all require software

Installation, Testing and Commissioning of 50" Full HD LED 4K Smart TV as monitor with Power Cord

complete as required & necessary video cards complete as required (if required).

Supply, Installation, Testing and Commissioning of 120W Power Supply for Camera for Outdoor

95 application with Metal case, Short Ckt Protection, stable power supply output as per Camera Compitible nos ₹ 690.00 8.00 ₹

Supply, Installation, Testing & Commissioning of 15U (600W X 600D)MM Wall mount closed rack with

front glass door, fan tray on top, perforated rear doors, keyboard tray with shelf. Casters & 2 nos vertical

power strip with std, as per technical specification etc. as required. Approved Make : Dlink / Uniteco/

Alpine / Valrack

Supply, Installation, Testing & Commissioning of unloaded UTP CAT6A Gigabit Modular Patch Panel for

24 ports in 1U form factor as per the tender specifications, with universal A/B labeling and

97 connector terminations on rear of panel allowing for quick and easy installation of 23 AWG cable.- as per nos ₹ 46,120.00 1.00 ₹

technical specification etc. Approved Make : Commscope / Uniteco/ Panduit (For Data Networking)

Supply, Installation, Testing & Commissioning of unloaded UTP CAT6 Gigabit Modular Patch Panel for

ports in 1U form factor as per the tender specifications, with universal A/B labeling and 110 connector

98 terminations on rear of panel allowing for quick and easy installation of 23 AWG cable.-Data includes nos ₹ 54,050.00 1.00 ₹

Data, Voice, CCTV, Wi-Fi as per technical specification etc. as required. Approved Make : Commscope /

Uniteco/ Panduit (For CCTV & Access Control)

Bio metric Access Control with face detection, Card Reader, Thumb Reader and having a memory storage

of 45 days for 300 members

100 Supplying & erecting, of HDMI cable ‐ 15 Mtr No ₹ 3,740.00 4.00 ₹

Providing & erecting open well type horizontal mono block pump set with stainless steel body having

following specification,

(C) 1 H.P. single phase open well motor pump set suitable for 185 LPM discharge @ 25 mtr. head, suitable

for 32 mm dia. Delivery pipe with control panel.

Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with gun metal cap

150 gram CO2 gas cartridge, powder and brackets confirming to IS 2171 1985 and complete erected with

102 necessary clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall complete. Ea. ₹ 1,696.00 6.00 ₹

[A] For 5 Kg Capacity

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary

103 clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. Ea. ₹ 8,586.00 6.00 ₹

[B] For 5.5 / 6.5 KG Capacity

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an

ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚C within a hour, The water cooler

104 should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded Ea. ₹ 55,340.00 1.00 ₹

by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet connection. The body of

water cooler will be made from Stainless Steel.

Supplying & erecting reverse osmosis (RO) water purification system with M.S. powder coated pedestal

frame, prefilter housing carbon filter suitable buster DC pump, auto low & high pressure switches with

following size of LPH capacity & erected as directed with one year comprehensive maintenance guarantee

[D] 100 LPH with 1 phase / 3 phase Raw water pump of 500LPH @ 2.5kg/cm2 ‐ (1N0 ‐ KBL, Groundfoss,

105 xylem), Dual media filter 10"x54" ‐ (1 No), Micron cartridge filter 20" x 2.5" ( 1No), High pressure pump Ea. ₹ 77,120.00 1.00 ₹

500LPH @ 10kg/cm2 ‐ (1No ‐ KBL, Groundfoss, xylem), RO Membrane housing with RO membrane of 40*40 ‐

(1No), RO pressure tube 4" x 1E ‐ ( 1No), 0 ‐ 1200LPH Rotameter ‐(2 Nos), with Recovery Rate 50%.

SITC of Outdoor LED Screen with Programable Controller ‐ Eye shape as per attached Drawings

Pixel Pitch P2.5mm Outdoor Screen Front access,

Screen Size should be 2880 x 9600 mm, 1R1G1B SMD 1415 Nationstar Lamp, Cabinet sizes should be 960mm x

480mm, Cabinet should be Mild steel, Cabinet Orientation should be W3 x H10,Cabinet weight ≤35 kg,

Module Size should be 320mm x 160mm, Module should be flat, White Balance Brightness (Nit) ≥6500cd,

Brightness uniformity should be >95%, Contrast ratio – 6000:1, Processing 16bit, View Angle H140 and V140

degree, Power supply unit should be Meanwell only (300w – 5V), Refresh rate should be ≥3840 Hz to 7680 Hz,

Peak power consumption ≤750W/sqm, Average power consumption ≤225w/sqm, Life of the screen ≥100000

hours, Operating temperature should be ‐30°C to + 60°C, Operating Humidity ‐10% to 95%,Screen, Cabinet

should be IP65 , Screen Weight should be 2310 Kgs.

LED Make : Qlite

106 Controller Specs: Ea. ₹ 82,93,040.00 1.00 ₹

Novastar VX10600

Total loading capacity: Up to 6.5million pixels, Max width: 3840 px, Max height: 1920 px

Video Inputs: 2 × HDMI (1 loop),1 × DVI (loop),1 × 3G‐SDI (loop),1 × OPT (10G optical, self‐adaptive)

Video Outputs: 10 × RJ45 (Ethernet to LED), 2 × OPT (10G optical), 2 × HDMI (monitor)

Genlock: 1 × In, 1 × Loop

Control: 1 × USB‐B (PC control),1 × USB‐A (cascading/updates),1 × LAN (RJ45)Each RJ45 port typically supports

~650,000 pixels at 60Hz refresh rate .

Warranty 3‐Years

MS Structure frame of suitable size to be designed fabricated and installed LED Display.

Components as per approval of Structure Engineer In charge / Consultant with certification. Final approval on

design to be certified by Architect.

DLP Year to be consider same as Civil Contractor for Free Operation & Maintanance of all bove Electrical

equipment as per tender Executed tender & non‐Tender items ‐ Free Job

After DLP period completion ‐ New Security Deposite 3% of Executed Electrical work Amount should be

submitted by contractor and same Security Deposit will be released after 3‐years successful completion

and certification of O&M Period.

Comprehensive O&M for the Full Electrical System for 1st Year after DLP period (3.5% of Inititla Cost)

Scope of work to Operate & maintnance of the following Work

LT Panel, LT Cables, DB, MCB, MCCB, Capacitor, Light Fixtures, Light Pole, Facade Lighting, Data‐TV‐Telephone

network, PA System and Equiment etc as per Executed in this tender & non‐Tender items

Payment will be released Quarterly

Turn Around time for the above work should be 24 Hr in case of minor repairing.

For Major breakdonw turn aroung time will be 72HR, if in this case any permission required than time to be

consider from time of permission granted by concern authority.

Comprehensive AMC for the Full Comprehensive Electrical Systemfor 2nd Year after DLP (period 4% of

Inititla Cost) ‐ Performance bank gurantee to be submit at time of completion of work

Scope of work to Operate & maintnance of the following Work

LT Panel, LT Cables, DB, MCB, MCCB, Capacitor, Light Fixtures, Light Pole, Facade Lighting, Data‐TV‐Telephone

network, PA System and Equiment etc as per Executed in this tender & non‐Tender items

Payment will be released Quarterly

Turn Around time for the above work should be 24 Hr in case of minor repairing.

For Major breakdonw turn aroung time will be 72HR, if in this case any permission required than time to be

consider from time of permission granted by concern authority.

Comprehensive AMC for the Full Comprehensive Electrical Systemfor 3rd Year after DLP (period 4.5% of

Inititla Cost) ‐ Performance bank gurantee to be submit at time of completion of work

Scope of work to Operate & maintnance of the following Work

LT Panel, LT Cables, DB, MCB, MCCB, Capacitor, Light Fixtures, Light Pole, Facade Lighting, Data‐TV‐Telephone

network, PA System and Equiment etc as per Executed in this tender & non‐Tender items

Payment will be released Quarterly

Turn Around time for the above work should be 24 Hr in case of minor repairing.

For Major breakdonw turn aroung time will be 72HR, if in this case any permission required than time to be

consider from time of permission granted by concern authority.

Technical Man-Power Supplyinhg certified, trained 2+Year Experienced / Electrician man-power for the

Monthly Basis for 1st Year

111 Scope of work to Operate & maintnance of the following Work Month ₹ 19,470.00 12.00 ₹

HT VCB Panel, RMU, Transformer, Lt Panel, HT & LT Cables, DB, MCB, MCCB, Capacitor, Light Fixtures, Light

Pole, Facade Lighting, Data‐TV‐Telephone network, PA System, CCTV‐DVR and Equiment etc

Technical Man-Power Supplyinhg certified, trained 2+Year Experienced / Electrician man-power for the

Monthly Basis for 2nd Year

112 Scope of work to Operate & maintnance of the following Work Month ₹ 20,500.00 12.00 ₹

HT VCB Panel, RMU, Transformer, Lt Panel, HT & LT Cables, DB, MCB, MCCB, Capacitor, Light Fixtures, Light

Pole, Facade Lighting, Data‐TV‐Telephone network, PA System, CCTV‐DVR and Equiment etc

Technical Man-Power Supplyinhg certified, trained 2+Year Experienced / Electrician man-power for the

Monthly Basis for 3rd Year

113 Scope of work to Operate & maintnance of the following Work Month ₹ 21,600.00 12.00 ₹

HT VCB Panel, RMU, Transformer, Lt Panel, HT & LT Cables, DB, MCB, MCCB, Capacitor, Light Fixtures, Light

Pole, Facade Lighting, Data‐TV‐Telephone network, PA System, CCTV‐DVR and Equiment etc

Technical Man-Power Supplyinhg certified, trained 2+Year Experienced / Electrician man-power for the

Monthly Basis for 4th & 5th Year

114 Scope of work to Operate & maintnance of the following Work Month ₹ 22,700.00 24.00 ₹

HT VCB Panel, RMU, Transformer, Lt Panel, HT & LT Cables, DB, MCB, MCCB, Capacitor, Light Fixtures, Light

Pole, Facade Lighting, Data‐TV‐Telephone network, PA System, CCTV‐DVR and Equiment etc

Liaoning with Torrent & Electrical Inspector, CEIG, Hi‐rise permission for getting 11KV HT Power & Electrical

inspector certification in totality to charge the power other related accessories. etc. complete.

Charges for doing liasioning work for obtaining the necessary clearances from the Electrical

inspector/competent Authorities for the total Electrical installation, Elevator Inspection, co‐ordinating with

various agencies. All necessary drawings, calculations, test certificates, etc. as required by the seauthorities

shall be prepared and furnished by the EPCV endor. Any modification / rectification as required by these

authorities shall be carried out by the EPCV endor at free of cost. The fees required to be paid to these

authorities for inspection shall be borne by Owner on production of documentary evidences.

All Required NOC / Approval / Liasoning for the Electrical and HVAC system in the scope of Electrical

Description of Work Unit Total Qty. Rate

WATER SUPPLY PLUMBING & SANITARY FITTING

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following

1 outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making Rmt 50.00 ₹ 116.40 ₹

good the wall ceiling and floor.(C) 32mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following

2 outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making Rmt 50.00 ₹ 124.43 ₹

good the wall ceiling and floor.(D) 40mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following

3 outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making Rmt 50.00 ₹ 165.38 ₹

good the wall ceiling and floor.(E) 50mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following

4 outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making Rmt 100.00 ₹ 274.68 ₹

good the wall ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following

5 outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making Rmt 100.00 ₹ 332.91 ₹

good the wall ceiling and floor.(G)110 mm

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i)

Providing and fixing screw down bib taps of following size.(C) Gun metal screw down bib tap. (i) 15mm dia.

8 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia. Each 5.00 ₹ 184.98 ₹

9 Providing and fixing Gun metal check or non-return fullway wheel valve.(B) 20mm dia. Each 5.00 ₹ 201.80 ₹

10 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Each 5.00 ₹ 416.47 ₹

11 Providing and fixing Gun metal check or non-return fullway wheel valve.(D) 32mm dia. Each 5.00 ₹ 311.61 ₹

12 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. Each 5.00 ₹ 656.86 ₹

13 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (i) 25mm dia. Each 5.00 ₹ 131.57 ₹

14 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii) 50mm dia. Each 2.00 ₹ 187.96 ₹

15 Providing and fixing ball cock of approved. quality as directed.(B) Abonite (i) 25mm dia. Each 5.00 ₹ 101.89 ₹

16 Providing and fixing ball cock of approved. quality as directed.(B) Abonite (ii) 50mm dia. Each 5.00 ₹ 136.52 ₹

17 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. Each 5.00 ₹ 948.68 ₹

18 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. Each 5.00 ₹ 100.90 ₹

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

19 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making Rmt 75.00 ₹ 165.21 ₹

good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

20 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making Rmt 75.00 ₹ 202.97 ₹

good the wall, ceiling and floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

21 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making Rmt 150.00 ₹ 247.25 ₹

good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

22 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making Rmt 100.00 ₹ 330.36 ₹

good the wall, ceiling and floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

23 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making Rmt 150.00 ₹ 437.66 ₹

good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

24 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making Rmt 150.00 ₹ 647.30 ₹

good the wall, ceiling and floor etc. complete. [F] 50mm.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water

supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step

CPVC solvent cement, trenching, refilling & testing of joints complete. External -Underground - piping Works :-

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water

supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step

CPVC solvent cement, trenching, refilling & testing of joints complete. External -Underground - piping Works :-

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

29 on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center Rmt 50.00 ₹ 822.99 ₹

to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

30 on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center Rmt 50.00 ₹ 826.88 ₹

to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing &Laying & fixing PVC Floor Trap OR multi floor trap of 110 x 110mm dia diameter, with necessary

31 distance piece of 110mm dia pipe and 150x150mm Chillay /Camry/ S.S. Three Pease grating, making necessary each 5.00 ₹ 565.43 ₹

SLAB /WALLholes and cutting walls, etc complete. (Supreme/ Astral Makes)

RAIN DRAIN ITEM:‐ Excavation for pipes upto1.50 MT depth including sorting out and stacking of useful materials

and disposing the excavated stuff up to 50 mt lead ( A ) loose or Soft Soi

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame

33 of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R Each 5.00 ₹ 1,234.57 ₹

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of

34 the following internal diameter with collars and butt ends prepared for collar joints Rmt 150.00 ₹ 246.21 ₹

including testing of joints complete.(B) 150mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of

35 the following internal diameter with collars and butt ends prepared for collar joints Rmt 200.00 ₹ 344.59 ₹

including testing of joints complete.(C) 250mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of

36 the following internal diameter with collars and butt ends prepared for collar joints Rmt 150.00 ₹ 658.89 ₹

including testing of joints complete.(D) 300mm

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

37 (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation Each 15.00 ₹ 7,109.35 ₹

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x 850mm and 450mm deep for

pipe lines with three or more inlets. .

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside

plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat

cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm

38 nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. Each 5.00 ₹ 10,920.76 ₹

deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than

kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having

crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type

depth 0.90 Metre for 150mm diameter sewer.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside

plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat

cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm

39 nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. Each 2.00 ₹ 19,139.07 ₹

deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than

kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having

crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type

depth 1.50 Metre for 150mm diameter sewer.

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of Anti-

corrosive paint etc. complete.

Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap (Standard pattern) te weight of

cover to be not less 4.53 Kg.) .

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

43 Constructing Brick masonry road gully chamber 450mm x 450mm x 775mm with vertical gating complete. Each 10.00 ₹ 2,520.65 ₹

Constructing brick masonry road gully chamber 1100mm x 775mm including 500mm x 450mm (C.I. horizontal

grating with frame and vertical grating complete.)

Providing & fixing of the FRP Perforated type cover with frame size 450 x 450mm size total weight of cover and

45 frame to be withstand up to 10 ton. with including Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) 10 ton Cap. Each 15.00 ₹ 3,520.00 ₹

perforated type cover( Cover-600 x 600mm ) ( Frame:- 608 x 608mm)

Providing & fixing of the FRP Perforated type cover with frame size 500 x 600mm size total weight of cover and

46 frame to be withstand up to 10 ton. with including Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) 5 ton Cap. Each 15.00 ₹ 4,517.00 ₹

perforated type cover( Cover-500 x 800mm ) ( Frame:- 586 x 686mm)

Providing & fixing of the FRP Perforated type cover with frame size 600 x 600mm size total weight of cover and

47 frame to be withstand up to 10 ton. with including Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) 10 ton Cap. Each 15.00 ₹ 5,280.00 ₹

perforated type cover( Cover-600 x 600mm ) ( Frame:- 756 x 756mm)

Providing & fixing of the FRP Perforated type Drain Cahnnel cover with frame size 300 x 300mm size total weight

of cover and frame to be withstand up to light vehical load cap.. with including Cement Mortar 1:5 (1- Cement: 5-

Coarse sand) (1) light vehical load cap. perforated type cover( Cover-300 x 300mm ) ( Frame:- 340 x 340mm)

SUBMERSIBLE TYEP PRESSURE BOOSTER PUMPS- Supply, installation, testing & commissioning of VFD based

Submersible tyepepressure booster pump system with FRP tank, pump-motor set, suction delivery valves & pipe,

all instrumentation viz. Pressure switch, pressure gauge, level indicator, etc, starter panel (including one main

pump & one trimmer pump shall have VFD), cables, etc. FRP Hydropneumatic Tank with inter connection and

suitable connections such as inlet, drain, outlet, pressure gauge, union connection, isolation valve, outlet pipe (to be

connected to the header pipe), pressure switch, outlet valves, mounting pads, etc. with all accessories & as per the

49 drawing. ( Groundfos, ITT Lowara, Willo, Kirloskar, KSB Make) 'Supply, installation, testing & commissioning of Job 1.00 ₹ 6,15,886.00 ₹

online vertical booster pumps directly coupled with the motor with SS casing, SS impeller, SS shaft and driven by

415 V AC, 3 phase, 50 Hz.motor running at 2900 RPM speed and shall be supplied with all accessories viz. strainer /

dry run protection/foot valve, base plate, coupling, etc.complete. The scope shall also include suction & delivery

piping & valves.( For Sprinkler & Irrigation Area. Only) 10 m3/hr x 2 Nos. main Pumps 15 m3/hr x 1 Nos. Stand by

Pumps Head : 40 mtr, Precharged Tank : 200 ltrs. x 1 nos.

WATER FOUNTAIN:- STICof fountain designin 1" dia and ¾” Dry jet fountain ( 19 to 20 no.) Jet nozzels in floor

level with Upvc pipe fitting with control valves, necessary cable works with, Low Head High flow pump 7.5 HP pool

pump set 75mm/ 50mm outlet with suction filter unit set water Distribution system on top, control valves etc in

the Circular water body in side area. The works are commission & testing the Water system at site./ water body

Under water Warm white / RGB LED lights 19 driver and controllers, 3” inlet upvc piping form pump room to water

50 body Drain line , overflow , electrical cable for motor 4.0 x 3 core ,electrical lights 25 x 4 core cable in water body , Job 1.00 ₹ 7,21,466.00 ₹

all works are including necessary civil works relating to the piping and controls works, all components are as per

the standard IS , ASTM, BS, approved make, all works are complet as per the arch, design consultant , client eng.

incharge as required etc. comp. ( Water Body area:- 60 to 70 sq.mtr. with having 19 to 25 numbers jet fountaine

inside of min 1.5 mtr to max 3mtr jet throught req.)

WATER COOLER ; Supply, installation, testing & commissioning of S.S. storage type water cooler with inbuilt with

on line 50LPH R.o.plant & U.V. fultration along with built all intercnnectio piping, supports and valve and other

electrical requirment ,along with inbuilt storage tank with nessesarry accessories, safety valve, air valve, drain

arrangement, all insturumentation, base frame, necessary electrification, etc. complete for Drinking Water supply.

( Voltas, Blu star, Power H2o Make) Capacity : 80 storage capacity. Complete as directed by site eng. incharg.

PUDDLE SLEEVES:-Providing & Installing of the G.I. heavy duty Puddle Sleeve in the UGT & OHT water tanks

durring the construction of the RCC tanks. The pipe and flazes nut bolt material are as per the IS recommondation

must be follow. all works must properly finishing as per site eng. Incharge slab & Beams where ever req. 100 mm

pipe dia x 600mm length

PUDDLE SLEEVES:- Providing & Installing of the G.I. heavy duty Puddle Sleeve in the UGT & OHT water tanks

durring the construction of the RCC tanks. The pipe and flazes nut bolt material are as per the IS recommondation

must be follow. all works must properly finishing as per site eng. Incharge slab & Beams where ever req. ,80 mm

pipe dia x 600mm length

Providing & Installing of the G.I. heavy duty Puddle Sleeve in the UGT & OHT water tanks , durring the construction

of the RCC tanks. The pipe and flazes nut bolt material are as per the IS recommondation must be follow. all works

must properly finishing as per site eng. Incharge slab & Beams where ever req. ,50 mm pipe dia x 450mm length

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and

connection etc. complete on terrace

SITC of Heavy duty PVC flexible pipe of 25mm dia with 15 meter length , the pipe shouble be included Gunmetal

hose nozzel at the termination point. For gaden manual irrigation purpose. As per the site eng. incharge and as per

the guide line o be execute. (Pipe:- Ashirvad, Kissan, Supreme, valve RB, Zoloto, Audco or Eq. Make)

57 SITC of Spray Pop Up Sprinkler 3 to 5 Meter Radius of Hunter/Rain Bird / Toro make No. 1.00 ₹ 1,800.00 ₹

58 SITC of Spray Pop Up Dripper/Bubller 1.5 to 3 Meter Radius of Hunter/Rain Bird / Toro make No. 1.00 ₹ 1,080.00 ₹

59 SITC of Swing Joing 3/4" of Hunter/Rain Bird / Toro make No. 1.00 ₹ 900.00 ₹

60 SITC of Swing Joint 1/2" of Hunter/Rain Bird / Toro make No. 1.00 ₹ 600.00 ₹

61 SITC of PP Clamp Saddle 3/4" PN 16 of Astore/Cepex make No. 1.00 ₹ 240.00 ₹

62 SITC of PP Clamp Saddle 1/2" PN 16 of Astore/Cepex make No. 1.00 ₹ 240.00 ₹

63 SITC of Double Acting Air Release Valve 1" of ARI/AZUD/R.B. OR EQ. make Each 1.00 ₹ 4,200.00 ₹

Supply and installation of open drip piping consits of 16mm dia drip lines of length 20m connected to 23 m long

37.5 MM HDPE lateral capped at the end per block, as per Engineer instruction. Including 16mm drip lines , End

drip caps fittings, Rubber drip fitings, Offtake connectors drip fittings, 50 MM Main screen filter,Start connectors

without rubber,Start connectors with rubber( Jain,Dutron, Price, Kissan Make)

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks having

crushing strength not less than 35 kg./Sqcm. In C.M. 1:5 Perforated C.I. cover with frame (Light duty) 455 mm. x

610 mm. internal dimension, total weight of cover with frame to be not less than 38 kg. (Weight of cover 23 kg. and

weight of frame 15 kg.) R.C.C. top slab of cover 23 kg. and weight of frame 15 kg.) R.C.C. top slab with 1:2:4 mix (1

cement: 2 coarse sand : graded stone aggregate 20 mm. nominal size) foundation concrete 1:5:10 inside

plaster 15 mm. thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete. [I] Inside Dimensions 455mm x 610 mm & 450 mm deep ( Valve Chamber)

BORE WELL:-Supply installation, testing, commissioning of Bore well submersible pump to be installed in the tube

well of required indicated capacity and head as per relevant IS for Bore water lifting with suitable submersible vet

type, water cooled, squirrel case motor conforming to IS 9283, working of 3-phase, 50Hz +/- 3% 415 VAT +/- 10%,

AC supply 2900 RPM synchronous speed with 10mtr. copper conductor flat cable from pump to starter panel with

cables and termination ( all supports clamps pipe fittings mechanical seal, bearing, bush, strainer, etc. comp.,

66 Casing C.I., S.S. CF8M impeller, bronze casing, wearing and bearing bush, TC mechanical seal, S.S. bearing, S.S. shaft Job 1.00 ₹ 12,75,000.00 ₹

with sleeve, S.S. strainer, and M.S. morter along with water guard, single phase preventor with all cables of

appropriate size control and instrumentations, switches, testing, and installation along with testing. The scope shall

also include delivery isolation valve & NRV with PVC piping (400 dia Drill well @ 200mm dia MS. heavy class pipe :

BORE WELL) Assume 250 TO 275mtr depth) ( 15 TO 20 MTR CU. PER HR. OUT PUT FLOW RATE with potable

water quality ) (15 TO 20HP PUMP.)

67 PERCOLATION WELL: ( 1 NOS.)_Drilling of Pilot bore hole in Alluvial Strata by Direct Rotary Rig of 250 mm. Rmt. 60.00 ₹ 818.00 ₹

68 Reaming 400 mm. Rmt. 60.00 ₹ 250.00 ₹

69 Electrologging charges with carting. Job 1.00 ₹ 21,240.00 ₹

70 Providing and installing 200 mm dia IS:12818 uPVC Casing Pipe "CM" Class Plain Pipe. Rmt. 30.00 ₹ 1,703.00 ₹

71 Providing and installing 200 mm dia IS:12818 uPVC End Cap, with Air Vent Cowl. Set 1.00 ₹ 726.00 ₹

200 mm dia Regular with 1.5 mm Slotted size Cage type trapezodial shape wire wound little carbon galvanized

screen, confirming to IS:8110.

73 Supply of Pea sized Gravel. Cmt 4.00 ₹ 2,394.00 ₹

74 Air Vent of 50 mm bend Unit 1.00 ₹ 435.00 ₹

75 Lowering and removing of dropline up to depth 150 Mtr. Rmt. 60.00 ₹ 173.00 ₹

76 Air compressor 600 CFM/150 PSI. Lot 1.00 ₹ 1,451.00 ₹

77 Excavating pit for installing precast filter system 2.90 x 2.90 x 1.125 Mt. deep. Cmt. 9.46 ₹ 105.00 ₹

78 Providing PCC of 75 mm thickness of 1:4:8 grade. Cmt. 0.09 ₹ 4,003.00 ₹

Providing & laying Precast RCC M 25 rainwater filtration system of Inner dimention 1.00 x 1.00 x 1.00 Mt. &

Minimum 50 mm wall thickness. 2 numbers of 50 mm thick closing cover 0.55 x 1.10 Mt. with Hook, 50 mm THk.

Perforated Intermediate Partition Panel to retain Filter Media. Wall Panel 1250/1000 x 1000 x 50 mm Thk. with

125 mm Wide Ribbed / Champhered End connected with Epoxy coated 12 mm Dia. Pin using Chemical Grouting of

adequate strength and Mortar Joint Adhesive on Ribbed Edge surface. 8 Set each of 50 mm dia uPVC bend with

mm uPVC pipe fixed in wall panel at equal distance.

80 Providing & filling Filter Media mixure of nodular calcium carbonate and IV800 graphite. Lot 1.00 ₹ 1,451.00 ₹

81 Providing and filling Pre filter a mixture of 20 mm - 40 mm gravels surrounding the precast filter systemsystem. Cmt. 4.00 ₹ 2,394.00 ₹

Providing and Installing Filter System and Bore well with 160 mm dia 6 Kg pressure PVC pipe along with required

Providing & Installing 0.5 meter height SS 304 Wedge Wire Screen Screen: 1.00 mm slotted 150 mm dia , Anchor

fastened at bottom.