Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical P O NEMMARA PALAKKAD DIST PIN 678 508 | PALAKKAD | KERALA | 678508 | Accepted-Technical Temporarily Accepted |
| 2 | Accepted-Technical 1406 SUB TREASURY KOLLENGODE PALAKKAD | PALAKKAD | KERALA | 672122 | Accepted-Technical Temporarily Accepted |
Tender Value
₹9.9 L
EMD Value
₹24,900
Closing Date
14 Aug 2026, 12:30 pmClosed
Preveen.P.Divisional Forest Officer,Nemmara
Preveen P Divisional Forest Officer Nemmara Ayinamppadam Palakkad 678508
Cost of construction of Watch Tower at Seetharkundu Campshed Compound under Kollengode Section of Kollengode Range during 2026-27
2026_FD_864562_1
KFDDO/46373/2026-DFONMR/D
Open Tender
Civil Works - Buildings
Item Wise
270 days
Seetharkundu
Please refer the E-Tender Notification and Condition
9 documents required · 9 mandatory
₹2,000
Yes
₹24,900
Yes
19 Aug 2026
6 Aug 2026
15 Aug 2026
6 Aug 2026
14 Aug 2026
6 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.All kinds of soil | - | M3 | 359.72 | - |
| 2 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed,within a lead of 50 m.Hard rock (blasting prohibited) | - | M3 | 1,578.3 | - |
| 3 | Excavating holes more than 0.10 cum & upto 0.50 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc,disposing of surplus excavated soil; as directed within a lead of 50 m and lift up to 1.5 m.Hard rock (blasting prohibited) | - | Holes | 478.3 | - |
| 4 | DOWEL BARS - Supplying and providing MS dowel bars of size 20 mm dia , 1.5m long (1m in rock and 0.5 m in concrete ) including drilling holes of 25mm dia and filling the gap with cement grout ( 0.25kg/each) etc complete | - | Nos | 595.67 | - |
| 5 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing n position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 0.8 | Kg | 112.43 | ₹89.93 |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete. | 0.6 | Kg | 140.41 | ₹84.23 |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | M3 | 9,235.97 | - |
| 8 | Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | Kg | 230.93 | - |
| 9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre
or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | M2 | 842.14 | - |
| 10 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | - | Mtr | 565.05 | - |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.26 MB
Tendernotice_2.pdf
PDF • 0.13 MB
Tendernotice_3.pdf
PDF • 0.53 MB
BOQ_1462854.xls
BOQ • 0.24 MB
ScheduleWatchTower.pdf
Tender Documents • 0.70 MB
Dateinsuffcientbid.pdf
PDF • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .