BID DOCUMENTS FOR PROVIDING SUPPLYING, LOWERING AND LAYING OF 150MM RISING MAIN FROM CHORI FALIYA PS TO DHOBIDHOVAN PS FOR DHARMPUR NAGARPALIKA, DHARAMPUR

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT RS.

Sr No Description Amount

1 Rising Main PS to PS (800 m) ₹

2 Pumping Machinary (Electrical) ₹

Part A Total Amount of A ₹

Part A Total Amount of A ₹

3 3 Pumping Sttaion Painting and 3 Nos. Flow Meter ₹

Part B Total Amount of B ₹

Part B Total Amount of B ₹

Add 18% GST on Part C ₹

Part C Part B + GST on Part C ₹

Say Total Amount (Rs.) ₹

Say Total Amount (Rs.) ₹

Sub Estimate No.-3 (A)

Sewer Pumping Main from PS to PS (L-800 m)

Sr. No. Description Unit Quantity Rate Amount

Clearing and grubbing road land including uprooting rank vegetation grass

1A bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier Hectare 0.12 ₹ 1,08,824.63 ₹

and disposal of unserviceable materials (B) By manual in area of thorny jungle

Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with

shoring and struting if required as per required gradient and line including safety

provisions using site rails and stacking excavated stuff including up to all required lead

cleaning the site etc. complete for all lifts and strata as specified.

a) 0.00 m to 1.50 m depth

i) In all sorts of soil and soft murrum Cum 726.76 ₹ 97.90 ₹

ii) In hard murrum, boulders incl. macadam road. - Cum 90.85 ₹ 148.50 ₹

iii) In soft rock and/or masonry in CM or L M or Lime Concrete. Cum 45.42 ₹ 179.30 ₹

iv) In hard rock and / or in C. C. 1:2:4 or RCC with blasting and chiseling or by chiseling only. Cum 46.00 ₹ 401.50 ₹

b) 1.50 m to 3.0 m depth

i) In all sorts of soil and soft murrum Cum 73.13 ₹ 107.80 ₹

ii) In hard murrum, boulders incl. macadam road. Cum 268.16 ₹ 162.80 ₹

iii) In soft rock and/or masonry in CM or L M or Lime Concrete. Cum 121.89 ₹ 196.90 ₹

iv) In hard rock and / or in C. C. 1:2:4 or RCC with blasting and chiseling or by chiseling only. Cum 25.00 ₹ 426.80 ₹

Providing Bedding including ramming,watering,consolidating etc.complete as per

standard and instruction of engineer incharge

a) As above with selected excavated earth available near site Cum 24.00 ₹ 66.00 ₹

b) As above with murrum brought from outside including all lead Cum 24.00 ₹ 193.60 ₹

Refilling of pipeline trenches

3 Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus

stuff as directed within a radius of 3 km.

Refilling as directed Cum 1116.81 ₹ 24.20 ₹

Sr. No. Description Unit Quantity Rate Amount

D.I. K-9, grade Pipes: (D/F)

Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter with

internal cement mortar lining including all taxes, insurance, transportation, freight

4 charges, octroi, inspection charges, loading, unloading, conveyance to departmental

stores, stacking etc. complete. (IS 8329-2000). Rate for DI pipe based on Wholesale

Price index of Pig Iron as 157.60 for the month of Dec-2022. For sewerage project

cement mortor lining shall be with sulphate resistance cement.

5 Lowering, laying and jointing Mortarlined D. I. Pipes of various classes with CI / MS

specials of following diameters in proper position, grade and alignment as directed by

Engineer-in-charge including hydraulic testing etc. comp.

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers

or any other specials as per BS-EN-545/1995 Class-A series K12 suitable for use with

6 D.I. Pipes manufactured as per IS:8329/1994delivery of specials is to be made to site of

works any where in Gujarat including all taxes, loading, unloading, carting, stacking,

insurance, inspection charges, octroi etc. complete.

Socket & Spigot Type

For 80 to 300mm dia Kgs 808.00 ₹ 148.00 ₹

Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest Edition) of

following class and diameter including all taxes, insurance, transportation, freight charges,

7 octroi, inspection charges, loading, unloading, conveyance to departmental stores,

stacking etc. complete.

Sluice valves with ISI mark only

PN-1.6 With gear operated (PD type short body)

Providing and supplying C. I. Air valves of approved make & quality of following class and

diameter including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Air valves double acting (DS2)

Lowering, laying and jointing in position following C. I. / D/F Reflux valves, Butterfly

9 valves, Sluice valves and Air valves including cost of all labour, jointing material, including

nut bolts and giving satisfactory hydraulic testing, etc. complete.

Sr. No. Description Unit Quantity Rate Amount

Sluice valves with ISI mark only

Air valves double ball Flanged

Providing and casting in situ C.C. in grade M-20 (proportions as per mix design or as per

table9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap metal of

size 6 mm to 20 mm for RCC work, including scaffolding centering, formwork, needle

vibrated consolidation, curing complete up to 6 meter depth or height (excluding cost of

reinforcement and neat finishing) with centering and shuttering/deshuttering etc. complete

for structure other than water retaining (Below G.L)

Footing for column or foundation (with form work) - Thrust block Cum 876.00 ₹ 6,072.00 ₹

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding

and placing in position complete upto floor two level (80 Kg/M3)

Construction of valves chambers in brick or bela stone masonry, locally available in C. M.

1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of trap metal size 25 mm lo 40 mm

thick. inside cement plaster in C. M. 1:3 and cement pointing outside in C. M. 1:3 and lop

cover of precast RCC slab 100 mm lhiek (wilh key hole in two parts. each with handles or

MS Bar elc. complete as given size) Upto 1 Ml. depth from G. L. lo pipe invert level incl.

complete civil works but exci. cost of excavation and refilling, with cast in situ RCC slab in

one single piece wilh fixing of CI-MH Frame and cover (excl. cost of CI-MH Frame and

cover) with 23 mm thick brick masonry wall in C.M.1:6

Sub Total Amount ₹

Sub Total Amount ₹

Sub Estimate No.-3 (D)

Estimate of Pumping Machinary (Electrical) for LPS-1_Chokri Faliya

Sr. No. Description Unit Quantity Rate Amount

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to

1.0 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with 1 Nos ₹ 6,723.20 ₹

all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

100 AMP cat-III

LV POWER CONTROL CENTER (PCC): Supply, installation, testing and commissioning

LV Distribution Board (LVDB) totally enclosed, dust & vermin proof, indoor type,

fabricated from CRCA sheet steel with minimum thickness of 3 mm for base frame/

channel/ gland plates, 2.0 mm for load bearing members/ doors & 1.6 mm for internal

partitions, minimum degree of protection - IP 52 as per IS: 2147, suitable for operation on

3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation

compartments accomodating meters, aux / protective relays, LED type indicating lamps &

control MCBs as per IS: 13947, current & voltage transformers as per IS: 2705, air

insulated electrolitic grade Aluminum/ Copper busbar for three phase & neutral system, GI

earth bus for entire length, power/ control wiring using 1100V grade, FRLS insulated

copper conductor wires conforming to IS: 694 & 8130, equipment fittings, horizontally

2.0 running busbar compartment height of minimum 300 mm, incoming & ougoing cable 1 Set ₹ 43,183.00 ₹

connections for 1100V grade, Aluminium/ Copper conductor XLPE/ PVC insulated & PVC

sheathed armoured cable. LVDB shall have required incomming of following type &

Above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS /

IEC 60947-2 with trip free mechanism, current limiting type with Thermal-Magnetic /

Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum

2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical

protections & interlocks etc. MCCB module, when used as Incommer / Bus Coupler shall

have following technical features:

4 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu),

Microprocessor release

Sr. No. Description Unit Quantity Rate Amount

Control Panel Board with Microprocessor based soft starter:

Auto transformer starter suitable for local & remote pump control application consisting of

Auto Transformer (vacuum impregnated, air cooled having three (3) tappings at 50%,

65% and 80%), incomer MCCB / MPCB, overload relay and contactors as per Type II

coordination including digital MFM with RS 485 communication port, analogue type

ammeter with selector switch, run hour meter, required protective relays & control

A. T. S. from 36 to 45 HP

Star Delta starter suitable for local & remote pump control application consisting of

MPCB, overload relay and contactors as per Type II coordination including digital

3.2 voltmeter, analogue ammeter with selector switch, run hour meter, required protective 1 NOS ₹ 13,771.00 ₹

relays & control accessories.

S. D. from 16 to 20 HP

LT Power Capacitor:

Supply, installation, testing & commissioning heavy duty APP type capacitor unit, vacuum

impregnated with non-PCB / non toxic oil, internally delta connected with built in internal

fuses complete with discharge resistances & terminal cover, rated for 440 V AC, 3 Phase,

50 Hz as per IS: 13585 Part-1.

APP type Capacitor - 6 kVAR for each + 8 kVAR for each + 12 kVAR for each

Lighting Distribution Board (LDB) as under:

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be

4.0 used of same company of MCB to be used) suitable for Three phase incoming and single 1 NOS ₹ 5,096.00 ₹

phase horizontal type outgoing Per phase isolation type (PPI) single door 4 way Prewired

Lighting Distribution Board Suitable to house :

Incoming: 25A FP, ELMCB (30mA), Cat-III

Outgoing: 20A SP MCB (4 nos.), 16A SP MCB (4 nos.)

MEDIUM VOLTAGE CABLES

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded

Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC

type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps /

5.0 in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as 200 MTR ₹ 211.00 ₹

per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following

3.5 c X 50 Sq.mm AL XLPE Armoured (For Incomer to MCCB to LVPCC to Control

Sr. No. Description Unit Quantity Rate Amount

PVC insulated flat submersible cable as per detailed technical specifications of R/C of

5.1 GWSSB conforming to IS 694, IEC 60227 / 60228. 200 MTR ₹ 120.00 ₹

3 Core x 6 Sqmm CU XLPE Armoured cable (For 20 HP) Two Motors

5.2 3 Core x 10 Sqmm CU XLPE Armoured cable (For 25 HP) One Motor 100 MTR ₹ 194.00 ₹

5.3 3 Core x 10 Sqmm CU XLPE Armoured cable (For 40 HP) One Motor 100 MTR ₹ 194.00 ₹

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

5.4 marked copper wires of following size to be erected as directed. 100 MTR ₹ 175.00 ₹

4 C x 4 Sq.mm CU round PVC sheathed (For LDB, Instruments and Other.)

CABLE END TERMINATION AND CONNECTION :

Providing & fitting heavy duty brass cable glands (nickel-plated) with washers & rubber

ring conforming to IS, suitable for 3, 3½ & 4 core cables of following type & sizes:

Double Compression Brass Cable Glands

3.5 c X 50 Sq.mm AL XLPE Armoured (For Incomer to MCCB to LVPCC to Control

6.1 3 Core x 6 Sqmm CU XLPE Armoured cable (For 20 HP) Two Motors 4 Nos ₹ 107.00 ₹

6.2 3 Core x 10 Sqmm CU XLPE Armoured cable (For 25 HP) One Motor 2 Nos ₹ 120.00 ₹

6.3 3 Core x 10 Sqmm CU XLPE Armoured cable (For 40 HP) One Motor 2 Nos ₹ 120.00 ₹

6.4 4 C x 4 Sq.mm CU round PVC sheathed (For LDB, Instruments and Other.) 6 Nos ₹ 107.00 ₹

Sr. No. Description Unit Quantity Rate Amount

Providing & fitting crimping type Cable Terminals (Lugs) conforming to IS of following

types and sizes

Aluminium Reducer Terminals (in Sq.mm.)

3.5 c X 50 Sq.mm AL XLPE Armoured (For Incomer to MCCB to LVPCC to Control

Copper Reducer Terminals (in Sq.mm.)

3 Core x 6 Sqmm CU XLPE Armoured cable (For 20 HP) Two Motors

7.2 3 Core x 10 Sqmm CU XLPE Armoured cable (For 25 HP) One Motor 6 Nos ₹ 10.00 ₹

7.3 3 Core x 10 Sqmm CU XLPE Armoured cable (For 40 HP) One Motor 6 Nos ₹ 10.00 ₹

7.4 4 C x 4 Sq.mm CU round PVC sheathed (For LDB, Instruments and Other.) 12 Nos ₹ 8.00 ₹

Maintenance free Chemical Earthing

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty

cover. (A)(approved make OEM has to submit test certificate including value of earth

8.0 resistance of installation duly stamped and signed by agency and officer Incharge has to 5 Nos ₹ 4,546.00 ₹

ensure the value of earthing resistane mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg. (for LT panel and Pump)

Sr. No. Description Unit Quantity Rate Amount

INTERNAL WIRING:-

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

9.0 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 20 MTR ₹ 82.00 ₹

green colour for earth continuity of following size

with medium class Rigid PVC pipe and accessories

Main wiring with 3 wire 1.5 Sq.mm

Supply,Installation,Testing and Commissioning of Main wiring with 3 wire 2.5 sq. mm as

per tender specification / IS

INTERNAL POINT WIRING:-

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length , in below type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete. cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.

Point wiring for Individual Plug with earthwire of 1.5 sq.mm (Green) both are of ISI marked

1.1kV grade FRLS PVC insulated multistrand copper wires, in following type of to be

erected concealed in/ on surface of wall/ ceiling complete with Modular type switch &

pin Plug erected on PVC/ Metallic box covered with appropriate front plate modules

erected on/ in wall/ ceiling as per pipe erected with following type of accessories.For 16A

Plug with 2-2.5 sq.mm Cu. Wire with medium class Rigid PVC pipe and accessories.

Sr. No. Description Unit Quantity Rate Amount

LED LIGHT FIXTURES:

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

Luminaire efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used for

luminaire. ( fitting required LM-79 & LM-80 Certificates)

Tube Light with integral/ nonintegral driver

22-24 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Providing and erecting Approved make 1200mm sweep ceiling fan, capacitor type, having

double ball bearing 450mm down rod, canopies, shackle, rubber bush, blades, electronic

speed regulator, suitable to operate on 230V,50Hz AC supply conforming to IS:

374/1979.Fan shall be painted with white colour.

EXTERNAL LIGHTING:

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM 79 & LM-80 certificates) (NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

Above 60 to 90 watts - Cat. - III

B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms x

11.1 cms x 3 mm thick M.S. base plate, erected on wall or corner for mounting luminaire with 2 NOS ₹ 340.00 ₹

necessary hardware materials duly painted. For wall mounting indoor & Outdoor Flood

light Fixtures on wall of Buiding.

Sr. No. Description Unit Quantity Rate Amount

Fire & Safety Equipments:

Design, supply, erection, testing and commissioning of safety accessories for all electrical

equipment/ system. (a) Supply 4.00 mm thick Rubber Mat for LV of required length and

breath.- 6 Sq.Mtr, Supply 12.00 mm thick Rubber Mat for HT of required length and

12.0 breath.- 4 Sq.Mtr (b) Providing printed Instruction Chart both in English and Gujarati and 1 Lot ₹ 47,467.00 ₹

duly framed with front glasses for treatment of person suffering fron electric shock.-

Nos. (c) Supplying standard First Aid Box with all the standard contents- 2 Nos. (d) Fire

Bucket with 9 Litre Capacity- 4 Nos. (e) Fire Bucket Stand- 1 No. (f) Fire Extinguisher

(CO2 Type-4.5 kg)- 4 Nos. (g) Rubber Hand Gloves- 2 Pairs

Sub-Total Amount ₹

Sub-Total Amount ₹

Sub Estimate No.-3 (C)

Estimate of Flow Metter + Pump room Renovation

Sr. No. Description Unit Quantity Rate Amount

Full Bore Electromagnetic Flow Meter (Regular Power operated)- PN 1.0 (200 mm for

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter

with factory calibrated, Regular Power Operated, flanged connection, Flow sensor, Indicator,

transmitter and totaliser with all accessories viz. surge arrestor, associated cables, cabinets,

hardwares, etc complete as per following specifications:

I) Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or equivalent

standard, SS304/ Metallic Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/

1 Hastelloy Grounding Ring/ Inbuilt Grounding Electrode, Neoprene/ Polyurethane/ Hard Rubber/

Rilsan lining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing

with Junction Box, CS flanges.

II) Flow Transmitter/ Converter (Remote Field Mounted):

Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate, forward,

reverse, sum totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with

HART/Modbus output, one scalable pulse, one status output, IP 67 protection, Die cast

aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass window

enclosure, Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor to transmitter

communication etc alongwith wall mounted/ stand mounted cabinet.

Renovation work of Exisitng 3 nos. of Pumping station Painting works, Plaster, Reparing ₹ 3,96,519.73 ₹

Sub-Total Amount ₹

Sub-Total Amount ₹