Pavement Marking With Hot Applied Thermoplastic Paints, Fixing of Cat Eye, Footpath - Central Verge Colour Work & Their Related Civil Work at Different T.P. Road In Thakkarnagar Ward of North Zone. (ARC)

Name of Work :- Pavement Marking With Hot Applied Thermoplastic Paints, Fixing of Cat Eye, Footpath

- Central Verge Colour Work & Their Related Civil Work at Different T.P. Road In Thakkarnagar Ward of

North Zone. (ARC)

ftblwk ltb:- W•thÍtul X¬hldh Jtuzobtk swœt swœt xe.ve. htuz Wvh &btuoÃjtMx lt vxxt bthJtle, Vqxvt& <&t muhLx[j Jso fjh fhJtlt <&t

htuz Ft<tlu jd<e ylg ytlwmkdef ftbdehe fhJtlt ftb. (yu.yth.me.)

Quantity Item Unit Rate Amount

1 890.00 Road marking with hot applied thermoplastic paints strictly of Automark - Smt 559.00

"Specsmark", Asian Paints-"Apcomark", Katalline-"Traffix O" or Berger

Paints-"Sigmark" with reflectorising glass beads of Automark-"Autolux

Gold","Swarco","Sovitec" Asian Paints-Apcobids", "Potters" on bitumen

surface providing and laying a hot applied thermoplastic compound

mm thick including reflectorising glass beads @ 250gms per sqm area,

thickness of 2.5mm is excluding of surface applied glass beds as per

IRC:35-2015. The finished surface to be level, uniform and free from

streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut

patta. The white color marking should provide liminance coefficinet on

cemend road shalll be min 130 mcd/m2/luxand Asphalt road shall be

min100mcd/m2/luxduring the service life during the day time. The

marking should meet the performance criteria for night timer

eflectivity,wetrefl ectivity and skid resistance as mentioned in the section-

15 of IRC 35-2015.(As per approved R.A)

2 5.00 Road marking with hot applied thermoplastic paints with reflectorising No. 510.62

glass beads on bitumin surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including reflectorising glass

beads @ 250gms per sqm area, thickness of 2.5mm is excluding of

surface applied glass beds as per IRC:35. The finished surface to be

level, uniform and free from streaks and holes.) Directional Arrow,

Lettering. (AMC approved rate)

3 401.00 Cat Eye/ Road Stud/ RPM: Supplying of Moulded Twin Shank Raised No. 323.00

Pavement Markers made of polycarbonates and ABS moulded body and

reflective panels with Micro Prismatic Lens (No Glass Bed Lens) capable

of Providing total internal reflection of the light entering the lensface and

shall supporta load of 13635 kgs. tested accordance to ASTMD

Type Hand complying to specification of category A of MORTH Circular

NO RW/NH/33023/10- 97-DO lll Dt.11.06.1997. The height, width and

length shall not exceed 20 mm,130 mm and 130mm and with minimum

reflective area of 13 sqcm on each side and slope to the base shall be

35+/-5 degree.The strength of detachmen to finteg rated cylindrical

shank,(of diameter not less than 19+/-2 mm and height not less than

30+/-2 mm) from the body is to be a minimum value of 500 kgf. Fixing

will be by drilling holes on the road for the shank to go inside, without

nails and using epoxy resin based adhesive as per manufacturer's

recommandation and The color of the marker should be as per the

IRC35-2015 and as directed by Engineer-In-charge.(R & B SOR 2023-24

Item code:26162A)

AMDAVAD MUNICIPAL CORPORATION

4 200.00 Providing and applying primer before hot applied thermoplastic paints Smt 47.00

marking on RCC road surface, which must ensure better adhesion of

thermoplastic paint to the surface and also increase paint durability,

including all material, manpower, tools and machineary required for work,

with all required safety standards to work in running traffic conditions, as

per standards and as instructed by engg incharge Agency

has to quote rate on Sq.Mt. work basis).(As per approved R.A)

5 151.00 Providing & applying C.R. Base Road Marking Painting lines, dashes, Smt 219.00

arrow, letters etc. on Road in two coats on new Workwith ready mixed

road marking paint conforming to IS:164 and AASHTO standard M-248-

90 on concrete / bituminous surface, including required additive/ solvent,

providing safety cones,barricades, string, chalks or req. colour for line

marking, etc.Cleaning thesurface, removing of all dirt ,dust & other

foreign matter and clear the site as per engineer in charge.(As per

6 3000.66 Painting Two Coats on divider and footpath curb surface / New Concrete Smt 71.86

Surface ( Painting two coats after filling the surface with synthetic enamel

paint in all shades on new plastered concrete surfaces) (AMC approved

7 15.00 Providing and fixing Swiss type bollard made out of 1.5mm No. 3696.00

CRC sheet ,height 140cms,bottom dia 23cm,top dia 12cm with

direction plate of 30 cm dia fabricated necessary anchors as

directed and also provide through out lengh pipe of 25 NB for

the strenthing of bollard and reflectorised Micro Prismatic Grade

Sheet (Type XI)and three yellow strip 6 Inches wide of Type XI

Retro reflective Sheeting, fixing with P.C.C M25 grade

concrete(Foundation size 30cm×30cm×35cm).(AMC approved rate)

8 10.00 Supplying And Fixing Jumbo Bollard Swiss Type Made out of 1.5 cm No. 5687.75

crc sheet height 188 cms. Bottom dia 30 cms. Top dia 18cm.

With direction plate of 45cm dia. Fabricated as per attached drawing,

pre treated with phospheting process painted with apoxy

coating reflectorised with retro reflective sheetings specified by

M.O.R.T & H.'s latest specification.(B) High Intensity Grade. (AMC

Tender Amount Rs.

Seal and Signature of the Bidder Addl. City Engineer

Date: (North Zone)