Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹20 L
Closing Date
22 Oct 2026, 2:30 pm
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
Expenditure
General
04
1 condition
ELEGIBILITY CRITERIA : CLAUSE NO. 2.13 OF BID DOCUMENT VERSION -14 WILL BE REPLACED AS :- (A) BULK WILL BE REPLACED AS :- (A) BULK ORDERS WILL BE PLACED ONLY ON THOSE FIRMS WHO ARE ESTABLISHED, RELIABLE INDIGENOUS MANUFACTURERS/PRODUCERS OF STEEL AND WHO HAVE SUPPLIED SUCCESSFULLY THE SAME ITEM TO RCF/KXH, ICF/CHENNAI & MCF RAIBARELI IN PAST 4 YEARS AS ON DATE OF TENDER OPENING. (B) DEVELOPMENTAL ORDER ON THE NEW FIRMS CAN BE PLACED UP TO 20% QUANTITY BASED ON ASSESSMENT OF FOLLOWING : - 1. FIRM WHO ARE INDIGENOUS MANUFACTURERS/PRODUCERS OF STEEL AND 2. HAVE PERFORMANCE IN THE LAST 3 YEARS FOR SUPPLY OF SIMILAR ITEMS TO OTHER RAILWAY/PRODUCTION UNITS OTHER THAN RCF, ICF & MCF AND HAVE FINANCIAL CAPABILITY OR BASED ON LIST OF PLANT & MACHINERY RELEVANT TO MANUFACTURE OF THE TENDERED ITEMS AND FINANCIAL CAPABILITY WHERE EVER NECESSARY CAPACITY/CAPABILITY WILL BE ASSESSED BY RCF. NOTE 1 : THE ONUS OF SUBMISSION OF CERTIFICATE RELATED TO SUCCESSFUL SUPPLY OF MATERIAL TO ANY ZONAL RLY./PU LIES WITH TENDERERS ONLY. NON-SUBMISSION OF SUCH DOCUMENTS SHALL BE TAKEN AS NOT HAVING SUCH PERFORMANCE AND THEIR OFFER SHALL BE CONSIDERED FURTHER AS PER EXTANT RULES . NOTE 2 : OFFERS FROM AUTHORIZED AGENT WILL BE CONSIDERED ONLY IF THEY SUBMIT TENDER SPECIFIC AUTHORIZATION FROM THE MANUFACTURER FAILING WHICH THEIR OFFER WILL BE IGNORED SUMMARILY WITHOUT MAKING ANY FURTHER REFERENCE TO THEM. SIMULTANEOUS SUBMISSION OF OFFERS FROM THE MANUFACTURERS/ OEM AND THEIR AUTHORIZED AGENTS IN A TENDER FOR THE SAME ITEM/PRODUCT IS NOT PERMISSIBLE. IN CASE IN A TENDER OFFER OF THE MANUFACTURERS/ OEM AS WELL AS THEIR AUTHORIZED AGENTS IS RECEIVED FOR THE SAME ITEM/PRODUCT THEN BOTH THESE OFFERS WILL BE TREATED AS INVALID AND BE SUMMARILY REJECTED. Special Instruction to Vendors : Procurement of these items are restricted to Class I local suppliers only and the vendors who do not qualify to be Class I local suppliers should not quote in the tender as their offer shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tendered item participates in the tender it does so at it's own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.
14 conditions
QUANTITY SPLITTING : AS PER CLAUSE NO.2.17.2 OF BID DOCUMENT VERSION 14.0 OR LATEST WITH ALL CORRIGENDUMS AND AMENDMENTS IF ANY ISSUED BEFORE OPENING OF TENDER.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Inspection by TPI (Third Party Inspection) agency.
Bid document version 14.0 or latest with corrigendums and amendments if any, issued before tender closing shall be applicable. Latest version of bid document along with all corrigendums and amendments if any is available on IREPS website.
1 condition
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
1 location across Punjab · 14,14,100 Kg total
STEEL SHEETS
04261040~RCF
04261040
Open - Indigenous
Goods
Punjab
₹0
₹20 L
21 Sept 2026
21 Sept 2026
5 items · 14,14,100 Kg total
STEEL SHEET OF SIZE 15X2500X6400MM., as per Drawing: DIN EN 10025-5 S355 J2W+ N. SPECIFICATION FOR ULTRASONIC TESTING OF STEEL PLATES SHALL BE ASTM-A-578(REAPPROVED 2 001). THE ACCEPTANCE STANDARD SHALL BE "LEVEL B" (PARA 8 OF ASTM-A-578) WITH FREQUENCY 1 00% (ALL THE PLATES SHALL BE UT TESTING),SCANNING SHALL BE CONTINUOUS OVER 100% OF PLAT E SURFACE., Packing Instruction: MILD / CORTEN/ EN STEEL COILS, SHEETS AND PLATES:- (A) MILD, EN AND CORTEN STEEL SHEETS IN COIL FORM. THE COIL SHALL BE PROTECTED IN REASONABLY GOOD C ONDITION TO WITHSTAND NORMAL HANDLING HAZARD DURING TRANSIT WITH THE FOLLOWING PRO VISION AS THE BAREST MINIMUM: I) THE WHOLE COIL SHOULD BE WRAPPED WITH DOUBLE LAYER OF WATER PROOF PAPER AND A BIODEGRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS. II) THE INNE R EDGE OF THE COIL SHOULD BE PROTECTED BY GI RING FOLLOWED BY ANOTHER IRON RING. III) OU TER EDGE OF THE COIL SHOULD BE WRAPPED WITH GI RING. IV) COIL SHOULD BE SECURELY STRAPPE D WITH MINIUM 5 STEEL BANDS THROUGH THE EYES OF THE COIL AND MINIUM 3 STEEL BANDS ON T HE CIRCUMFERENCE OF THE EYE. V) HOT ROLLED COILS SHALL BE SUPPLIED WITH RUST PREVENTIVE OIL COATING ON THE OUTER LAYER, INNER LAYER AND ON THE BOTH EDGES. VI) COILS PROCESSED T HROUGH PICKLING AND OR SKIN PASSING OR COLD ROLLING OF THICKNESS UPTO 2MM SHALL BE PR OTECTED AGAINST CORROSION AND RUST BY COATING CORROSION PREVENTIVE FLUID, SOFT FILM, S OLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 . VII) WHOLE COIL SHOULD BE MOUNTED ON WO ODEN BLOCKS FOR EASY LIFTING/ STACKING. VIII) THE SHEETS IN COIL FORM FOR THICKNESS 2MM A ND ABOVE SHALL HAVE: INNER DIA OF COIL 450-800MM OUTER DIA OF COIL 1000-1300MM WEIGHT O F COIL 2.4 - 10 TONNES IX) THE SHEETS IN COIL FORM FOR THICKNESS BELOW 2MM SHALL HAVE: INN ER DIA OF COIL 450-650MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 5.0 - 10 TONNES. (B) MILD, EN AND CORTEN STEEL PLATES/SHEETS. I) PLATES ABOVE 5MM SHALL BE SUPPLIED WITH REAS ONABLE PACKING WITH METAL STRAPING FOR HANDLING DURING TRANSIT AND STORAGE. II) THE SH EETS/PLATES SHALL BE SUPPLIED IN BUNDLES WITH DOUBLE LAYER OF WATER PROOF PAPER & A BIO DEGRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS AND METAL PROTECTION IN EDGES.ALL THE SHEETS UPTO 2MM THCKNESS SHALL BE PROTECTED AGAINST CORROSION AND RUST BY COATING C ORROSION PREVENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 AND ALL THE SHEETS/PLATES ABOVE 2MM SHALL BE PROTECTED AGAINST COROSION & RUST WITH SUITA BLE MINERAL OIL OR OTHER TEMPORARY RUST PREVENTIVE COATING. III) ALL BUNDLES SHALL HAVE A MINIMUM OF 2 HOOPS UPTO 1.2 METER IN LENGTH AND ONE EXTRA HOOP FOR EVERY ADDITIONAL METER. THE BUNDLES SHALL ALSO BE PROVIDED WITH SKID (WOODEN PACKING UNDER NEATH) TO F ACILITATE HANDLING. IV) OPTIMUM WEIGHT OF THE BUNDLE SHOULD BE 2MT+-10%. MECHANICAL D AMANGE & CORROSION DURING TRANSIT IF ANY SHALL BE AT THE COST OF SUPPLIER. [ Warranty P eriod: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SHELL DEPOT, RCF | Punjab | 30500.00 Kg |
| Total | 30,500 Kg | |
STEEL SHEET OF SIZE 8X2500X4500MM., as per Drawing: DIN EN 10025-5 S355J2W+N. SPECIFICATION FOR ULTRASONIC TESTING OF STEEL PLATES SHALL BE AS PER EN10160 & ACCEPTANCE CRITERIA SHALL BE S1E1 OF EN10160 WITH FREQUENCY 100% (ALL THE PLATES SHALL BE UT TESTING),SCNANNING SHALL BE CONTINUOUS OVER 100% OF PLATE SURFACE., Packing Instruc tion: MILD / CORTEN/ EN STEEL COILS, SHEETS AND PLATES:- (A) MILD, EN AND CORTEN STEEL SHEET S IN COIL FORM. THE COIL SHALL BE PROTECTED IN REASONABLY GOOD CONDITION TO WITHSTAND NORMAL HANDLING HAZARD DURING TRANSIT WITH THE FOLLOWING PROVISION AS THE BAREST MIN IMUM: I) THE WHOLE COIL SHOULD BE WRAPPED WITH DOUBLE LAYER OF WATER PROOF PAPER AND A BIODEGRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS. II) THE INNER EDGE OF THE COIL SHOU LD BE PROTECTED BY GI RING FOLLOWED BY ANOTHER IRON RING. III) OUTER EDGE OF THE COIL SHO ULD BE WRAPPED WITH GI RING. IV) COIL SHOULD BE SECURELY STRAPPED WITH MINIUM 5 STEEL BA NDS THROUGH THE EYES OF THE COIL AND MINIUM 3 STEEL BANDS ON THE CIRCUMFERENCE OF THE EYE. V) HOT ROLLED COILS SHALL BE SUPPLIED WITH RUST PREVENTIVE OIL COATING ON THE OUTER LAYER, INNER LAYER AND ON THE BOTH EDGES. VI) COILS PROCESSED THROUGH PICKLING AND OR S KIN PASSING OR COLD ROLLING OF THICKNESS UPTO 2MM SHALL BE PROTECTED AGAINST CORROSIO N AND RUST BY COATING CORROSION PREVENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDI SPLACING TO IS: 1154 . VII) WHOLE COIL SHOULD BE MOUNTED ON WOODEN BLOCKS FOR EASY LIFTI NG/ STACKING. VIII) THE SHEETS IN COIL FORM FOR THICKNESS 2MM AND ABOVE SHALL HAVE: INNER DIA OF COIL 450-800MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 2.4 - 10 TONNES IX) THE SHEETS IN COIL FORM FOR THICKNESS BELOW 2MM SHALL HAVE: INNER DIA OF COIL 450-650MM OUT ER DIA OF COIL 1000-1300MM WEIGHT OF COIL 5.0 - 10 TONNES. (B) MILD, EN AND CORTEN STEEL PL ATES/SHEETS. I) PLATES ABOVE 5MM SHALL BE SUPPLIED WITH REASONABLE PACKING WITH METAL S TRAPING FOR HANDLING DURING TRANSIT AND STORAGE. II) THE SHEETS/PLATES SHALL BE SUPPLIED IN BUNDLES WITH DOUBLE LAYER OF WATER PROOF PAPER & A BIODEGRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS AND METAL PROTECTION IN EDGES.ALL THE SHEETS UPTO 2MM THCKNESS SHA LL BE PROTECTED AGAINST CORROSION AND RUST BY COATING CORROSION PREVENTIVE FLUID, SOF T FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 AND ALL THE SHEETS/PLATES ABOVE 2 MM SHALL BE PROTECTED AGAINST COROSION & RUST WITH SUITABLE MINERAL OIL OR OTHER TEMP ORARY RUST PREVENTIVE COATING. III) ALL BUNDLES SHALL HAVE A MINIMUM OF 2 HOOPS UPTO 1.2 METER IN LENGTH AND ONE EXTRA HOOP FOR EVERY ADDITIONAL METER. THE BUNDLES SHALL ALSO BE PROVIDED WITH SKID (WOODEN PACKING UNDER NEATH) TO FACILITATE HANDLING. IV) OPTIMUM WEIGHT OF THE BUNDLE SHOULD BE 2MT+-10%. MECHANICAL DAMANGE & CORROSION DURING TRA NSIT IF ANY SHALL BE AT THE COST OF SUPPLIER. [ Warranty Period: 30 Months after the date of de livery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SHELL DEPOT, RCF | Punjab | 37600.00 Kg |
| Total | 37,600 Kg | |
STEEL SHEET OF SIZE 10X2500X6800MM., as per Drawing: DIN EN 10025-5 S355 J2W+ N. SPECIFICATION FOR ULTRASONIC TESTING OF STEEL PLATES SHALL BE ASTM-A-578(REAPPROVED 2 001). THE ACCEPTANCE STANDARD SHALL BE "LEVEL B" (PARA 8 OF ASTM-A-578) WITH FREQUENCY 1 00% (ALL THE PLATES SHALL BE UT TESTING),SCANNING SHALL BE CONTINUOUS OVER 100% OF PALT E SURFACE., Packing Instruction: MILD / CORTEN/ EN STEEL COILS, SHEETS AND PLATES:- (A) MILD, EN AND CORTEN STEEL SHEETS IN COIL FORM. THE COIL SHALL BE PROTECTED IN REASONABLY GOOD C ONDITION TO WITHSTAND NORMAL HANDLING HAZARD DURING TRANSIT WITH THE FOLLOWING PRO VISION AS THE BAREST MINIMUM: I) THE WHOLE COIL SHOULD BE WRAPPED WITH DOUBLE LAYER OF WATER PROOF PAPER AND A BIODEGRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS. II) THE INNE R EDGE OF THE COIL SHOULD BE PROTECTED BY GI RING FOLLOWED BY ANOTHER IRON RING. III) OU TER EDGE OF THE COIL SHOULD BE WRAPPED WITH GI RING. IV) COIL SHOULD BE SECURELY STRAPPE D WITH MINIUM 5 STEEL BANDS THROUGH THE EYES OF THE COIL AND MINIUM 3 STEEL BANDS ON T HE CIRCUMFERENCE OF THE EYE. V) HOT ROLLED COILS SHALL BE SUPPLIED WITH RUST PREVENTIVE OIL COATING ON THE OUTER LAYER, INNER LAYER AND ON THE BOTH EDGES. VI) COILS PROCESSED T HROUGH PICKLING AND OR SKIN PASSING OR COLD ROLLING OF THICKNESS UPTO 2MM SHALL BE PR OTECTED AGAINST CORROSION AND RUST BY COATING CORROSION PREVENTIVE FLUID, SOFT FILM, S OLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 . VII) WHOLE COIL SHOULD BE MOUNTED ON WO ODEN BLOCKS FOR EASY LIFTING/ STACKING. VIII) THE SHEETS IN COIL FORM FOR THICKNESS 2MM A ND ABOVE SHALL HAVE: INNER DIA OF COIL 450-800MM OUTER DIA OF COIL 1000-1300MM WEIGHT O F COIL 2.4 - 10 TONNES IX) THE SHEETS IN COIL FORM FOR THICKNESS BELOW 2MM SHALL HAVE: INN ER DIA OF COIL 450-650MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 5.0 - 10 TONNES. (B) MILD, EN AND CORTEN STEEL PLATES/SHEETS. I) PLATES ABOVE 5MM SHALL BE SUPPLIED WITH REAS ONABLE PACKING WITH METAL STRAPING FOR HANDLING DURING TRANSIT AND STORAGE. II) THE SH EETS/PLATES SHALL BE SUPPLIED IN BUNDLES WITH DOUBLE LAYER OF WATER PROOF PAPER & A BIO DEGRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS AND METAL PROTECTION IN EDGES.ALL THE SHEETS UPTO 2MM THCKNESS SHALL BE PROTECTED AGAINST CORROSION AND RUST BY COATING C ORROSION PREVENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 AND ALL THE SHEETS/PLATES ABOVE 2MM SHALL BE PROTECTED AGAINST COROSION & RUST WITH SUITA BLE MINERAL OIL OR OTHER TEMPORARY RUST PREVENTIVE COATING. III) ALL BUNDLES SHALL HAVE A MINIMUM OF 2 HOOPS UPTO 1.2 METER IN LENGTH AND ONE EXTRA HOOP FOR EVERY ADDITIONAL METER. THE BUNDLES SHALL ALSO BE PROVIDED WITH SKID (WOODEN PACKING UNDER NEATH) TO F ACILITATE HANDLING. IV) OPTIMUM WEIGHT OF THE BUNDLE SHOULD BE 2MT+-10%. MECHANICAL D AMANGE & CORROSION DURING TRANSIT IF ANY SHALL BE AT THE COST OF SUPPLIER. [ Warranty P eriod: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SHELL DEPOT, RCF | Punjab | 407600.00 Kg |
| Total | 4,07,600 Kg | |
STEEL SHEET OF SIZE 12X2500X6300MM., as per Drawing: DIN EN 10025-5 S355 J2W+ N. SPECIFICATION FOR ULTRASONIC TESTING OF STEEL PLATES SHALL BE ASTM-A-578(REAPPROVED 2 001). THE ACCEPTANCE STANDARD SHALL BE "LEVEL B" (PARA 8 OF ASTM-A-578) WITH FREQUENCY 1 00% (ALL THE PLATES SHALL BE UT TESTING),SCANNING SHALL BE CONTINUOUS OVER 100% OF PLAT E SURFACE., Packing Instruction: MILD / CORTEN/ EN STEEL COILS, SHEETS AND PLATES:- (A) MILD, EN AND CORTEN STEEL SHEETS IN COIL FORM. THE COIL SHALL BE PROTECTED IN REASONABLY GOOD C ONDITION TO WITHSTAND NORMAL HANDLING HAZARD DURING TRANSIT WITH THE FOLLOWING PRO VISION AS THE BAREST MINIMUM: I) THE WHOLE COIL SHOULD BE WRAPPED WITH DOUBLE LAYER OF WATER PROOF PAPER AND A BIODEGRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS. II) THE INNE R EDGE OF THE COIL SHOULD BE PROTECTED BY GI RING FOLLOWED BY ANOTHER IRON RING. III) OU TER EDGE OF THE COIL SHOULD BE WRAPPED WITH GI RING. IV) COIL SHOULD BE SECURELY STRAPPE D WITH MINIUM 5 STEEL BANDS THROUGH THE EYES OF THE COIL AND MINIUM 3 STEEL BANDS ON T HE CIRCUMFERENCE OF THE EYE. V) HOT ROLLED COILS SHALL BE SUPPLIED WITH RUST PREVENTIVE OIL COATING ON THE OUTER LAYER, INNER LAYER AND ON THE BOTH EDGES. VI) COILS PROCESSED T HROUGH PICKLING AND OR SKIN PASSING OR COLD ROLLING OF THICKNESS UPTO 2MM SHALL BE PR OTECTED AGAINST CORROSION AND RUST BY COATING CORROSION PREVENTIVE FLUID, SOFT FILM, S OLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 . VII) WHOLE COIL SHOULD BE MOUNTED ON WO ODEN BLOCKS FOR EASY LIFTING/ STACKING. VIII) THE SHEETS IN COIL FORM FOR THICKNESS 2MM A ND ABOVE SHALL HAVE: INNER DIA OF COIL 450-800MM OUTER DIA OF COIL 1000-1300MM WEIGHT O F COIL 2.4 - 10 TONNES IX) THE SHEETS IN COIL FORM FOR THICKNESS BELOW 2MM SHALL HAVE: INN ER DIA OF COIL 450-650MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 5.0 - 10 TONNES. (B) MILD, EN AND CORTEN STEEL PLATES/SHEETS. I) PLATES ABOVE 5MM SHALL BE SUPPLIED WITH REAS ONABLE PACKING WITH METAL STRAPING FOR HANDLING DURING TRANSIT AND STORAGE. II) THE SH EETS/PLATES SHALL BE SUPPLIED IN BUNDLES WITH DOUBLE LAYER OF WATER PROOF PAPER & A BIO DEGRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS AND METAL PROTECTION IN EDGES.ALL THE SHEETS UPTO 2MM THCKNESS SHALL BE PROTECTED AGAINST CORROSION AND RUST BY COATING C ORROSION PREVENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 AND ALL THE SHEETS/PLATES ABOVE 2MM SHALL BE PROTECTED AGAINST COROSION & RUST WITH SUITA BLE MINERAL OIL OR OTHER TEMPORARY RUST PREVENTIVE COATING. III) ALL BUNDLES SHALL HAVE A MINIMUM OF 2 HOOPS UPTO 1.2 METER IN LENGTH AND ONE EXTRA HOOP FOR EVERY ADDITIONAL METER. THE BUNDLES SHALL ALSO BE PROVIDED WITH SKID (WOODEN PACKING UNDER NEATH) TO F ACILITATE HANDLING. IV) OPTIMUM WEIGHT OF THE BUNDLE SHOULD BE 2MT+-10%. MECHANICAL D AMANGE & CORROSION DURING TRANSIT IF ANY SHALL BE AT THE COST OF SUPPLIER. [ Warranty P eriod: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SHELL DEPOT, RCF | Punjab | 877400.00 Kg |
| Total | 8,77,400 Kg | |
STEEL SHEET OF SIZE 20X2500X6400MM., as per Drawing: DIN EN 10025-5 S355 J2W+ N. SPECIIFCATION FOR ULTRASONIC TESTING OF STEEL PLATES SHALL BE ASTM-A-578(REAPPROVED 2 001) WITH FREQUENCY 100% (ALL THE PLATES SHALL BE UT TESTING),SCNANNING SHALL BE CONTIN UOUS OVER 100% OF PLATE SURFACE., Packing Instruction: MILD / CORTEN/ EN STEEL COILS, SHEETS AND PLATES:- (A) MILD, EN AND CORTEN STEEL SHEETS IN COIL FORM. THE COIL SHALL BE PROTECTE D IN REASONABLY GOOD CONDITION TO WITHSTAND NORMAL HANDLING HAZARD DURING TRANSIT WITH THE FOLLOWING PROVISION AS THE BAREST MINIMUM: I) THE WHOLE COIL SHOULD BE WRAPPE D WITH DOUBLE LAYER OF WATER PROOF PAPER AND A BIODEGRADEABLE PLASTIC SHEET OF SUITAB LE THICKNESS. II) THE INNER EDGE OF THE COIL SHOULD BE PROTECTED BY GI RING FOLLOWED BY A NOTHER IRON RING. III) OUTER EDGE OF THE COIL SHOULD BE WRAPPED WITH GI RING. IV) COIL SHO ULD BE SECURELY STRAPPED WITH MINIUM 5 STEEL BANDS THROUGH THE EYES OF THE COIL AND MI NIUM 3 STEEL BANDS ON THE CIRCUMFERENCE OF THE EYE. V) HOT ROLLED COILS SHALL BE SUPPLIE D WITH RUST PREVENTIVE OIL COATING ON THE OUTER LAYER, INNER LAYER AND ON THE BOTH EDG ES. VI) COILS PROCESSED THROUGH PICKLING AND OR SKIN PASSING OR COLD ROLLING OF THICKNES S UPTO 2MM SHALL BE PROTECTED AGAINST CORROSION AND RUST BY COATING CORROSION PREVE NTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPLACING TO IS: 1154 . VII) WHOLE COIL SH OULD BE MOUNTED ON WOODEN BLOCKS FOR EASY LIFTING/ STACKING. VIII) THE SHEETS IN COIL FO RM FOR THICKNESS 2MM AND ABOVE SHALL HAVE: INNER DIA OF COIL 450-800MM OUTER DIA OF COI L 1000-1300MM WEIGHT OF COIL 2.4 - 10 TONNES IX) THE SHEETS IN COIL FORM FOR THICKNESS BEL OW 2MM SHALL HAVE: INNER DIA OF COIL 450-650MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 5.0 - 10 TONNES. (B) MILD, EN AND CORTEN STEEL PLATES/SHEETS. I) PLATES ABOVE 5MM SHAL L BE SUPPLIED WITH REASONABLE PACKING WITH METAL STRAPING FOR HANDLING DURING TRANSIT AND STORAGE. II) THE SHEETS/PLATES SHALL BE SUPPLIED IN BUNDLES WITH DOUBLE LAYER OF WAT ER PROOF PAPER & A BIODEGRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS AND METAL PROTEC TION IN EDGES.ALL THE SHEETS UPTO 2MM THCKNESS SHALL BE PROTECTED AGAINST CORROSION A ND RUST BY COATING CORROSION PREVENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATERDISPL ACING TO IS: 1154 AND ALL THE SHEETS/PLATES ABOVE 2MM SHALL BE PROTECTED AGAINST COROSI ON & RUST WITH SUITABLE MINERAL OIL OR OTHER TEMPORARY RUST PREVENTIVE COATING. III) ALL BUNDLES SHALL HAVE A MINIMUM OF 2 HOOPS UPTO 1.2 METER IN LENGTH AND ONE EXTRA HOOP F OR EVERY ADDITIONAL METER. THE BUNDLES SHALL ALSO BE PROVIDED WITH SKID (WOODEN PACKI NG UNDER NEATH) TO FACILITATE HANDLING. IV) OPTIMUM WEIGHT OF THE BUNDLE SHOULD BE 2MT +-10%. MECHANICAL DAMANGE & CORROSION DURING TRANSIT IF ANY SHALL BE AT THE COST OF SU PPLIER. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SHELL DEPOT, RCF | Punjab | 61000.00 Kg |
| Total | 61,000 Kg | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .