GEMC-511687747321071
Awarded to BEHARI LAL ENGINEERING LIMITED
₹21.6 L
Products
| Product | Brand / Model | HSN | Quantity | Unit Price | Amount |
|---|---|---|---|---|---|
| 2003737 | BLEL / Schedule8-2003737 | 84553000 | 2 pieces | 1,079,045 | 2,158,090 |
Loading
Loading…
Loading…
| # | Schedule | Awarded To | Bids | Value |
|---|---|---|---|---|
| 1 | Schedule 1 | DEEM ROLL-TECH LIMITED | 1 | ₹28.5 L |
| 2 | Schedule 2 | DEEM ROLL-TECH LIMITED | 1 | ₹3.6 L |
| 3 | Schedule 3 | BHARAT ROLL INDUSTRY PVT LTD | 1 | ₹3.6 L |
| 4 | Schedule 4 | DEEM ROLL-TECH LIMITED | 1 | ₹4.1 L |
| 5 | Schedule 5 | SHAIFALI STEELS LIMITED | 1 | ₹16.1 L |
Tender Value
₹37.3 L
EMD Value
Exempted
Closing Date
2 Feb 2026, 6:00 pmClosed
2003655
2003690
2003708
2003717
2003733
2003734
2003736
2003737
2003738
2114152 ROLL MATERIAL ALLOY CAST STEEL HARDNESS 40-45° SHORE C DRAWING REFERENCE 1-D22939
REV-C TENSILE STRENGTH 85 TO 100 kgf/mm² STAND NO BILLET MILL 1 & 2 SIZE 850 x 1200 mm BARREL HARDNESS 40-45 SHC ROLL APPROXIMATE UNIT WEIGHT 7.35 TONS UTS 85-100 KGF/SQ.MM NECK HARDNESS 40-45 SHC NECK RUNOUT 0.04 mm ROLL COATING ANTI-CORROSIVE RING HARDNESS 600-700 HV3 TEST CERTIFICATE REQUIRED YES RING DRAWING NO MEC/1/22938/REV ´C´ ------------------------------------ ----- SPECIAL INSTRUCTIONS: ---------------------------------------- 1) ULTRASONIC
UTS & ELONGATION TESTS SHALL BE DONE AND CERTIFIED. 2) FLAT WOBBLERS TO BE STRICTLY CONCENTRIC WITH ROLL NECK JOURNALS. 3) ROLLS TO BE SUITABLY PACKED AND NUMBERED FOR IDENTITY. 4) THE MICROSTRUCTURE SHOULD BE FREE FROM CONTINUOUS NETWORK OF CARBIDES ALONG THE GRAIN BOUNDARIES. 5) T.C. TO BE GIVEN ALONG WITH MICRO-STRUCTURE PHOTOGRAPH. A SEPERATE COPY TO BE SENT TO D.G.M(RS&RS) AT THE TIME OF DELIVERY. 6) THE ROLLS SHALL BE GUARANTEED AGAINST MANUFACTURING DEFECTS SUCH AS BLOW HOLES
CAVITY
NON-METALLIC INCLUSIONS
PIPE SEGREGATION
CRACKS
HARD SPOTS
FLAKES ETC WHICH MAY ADVERSELY AFFECT THEIR SERVICE LIFE. 7) SHOULD ANY ROLL FAIL PREMATURELY OR GIVE SUB-STANDARD PERFORMANCE DUE TO THE ABOVE DEFECTS
THE SUPPLIERS SHALL RECTIFY THE DEFECTS AT THEIR COST WHEREVER POSSIBLE TO THE ENTIRE SATISFACTION OF VSP OR MAKE PRORATA COMPENSATION OR MAKE FULL REPLACEMENT IF THE ROLL HAS BEEN REJECTED BEFORE USE. 8) THE ROLLS ARE ALSO TO BE GUARANTEED FOR THE ROLL LIFE AS MENTIONED OR 5 Bid Number : GEM/2026/B/7117383 Dated : 23-01-2026 Bid Document 1/23 YEARS FROM THE DATE OF SUPPLY TO VSP WHICH EVER IS EARLIER.THIS GUARANTEE CLAUSE SUPERSEEDS
GUARANTEE MENTIONED ELSEWHERE IN THE PO(A/T)
IN THIS REGARD. 9) HARDNESS TEST OF END RING SHALL BE DONE AND CERTIFIED. 10) THESE ROLLS ARE USED IN ROUGHING STANDS OF HOT ROLLING MILL.
ROLL MATERIAL SG CAST IRON (ACCICULAR) HARDNESS 70-75° SHORE C DRAWING REFERENCE 1/4012885
REV-E STAND NO BAR MILL 19 & 21 SIZE 360 x 600 mm BARREL HARDNESS 70-75 SHC ROLL APPROXIMATE UNIT WEIGHT 0.70 TONS NECK HARDNESS 38-45 SHC NECK RUN OUT 0.04 mm ROLL COATING ANTI-CORROSIVE COATING DROP IN HARDNESS 1 SHC PER 10mm ON BARREL DEPTH ------------------------------------ SPECIAL INSTRUCTIONS: ------------------------------------ 1) FLAT WOBBLERS TO BE STRICTLY CONCENTRIC WITH ROLL NECK JOURNALS. 2) ROLLS TO BE SUITABLY PACKED AND NUMBERED FOR IDENTITY. 3) T.C. TO BE GIVEN ALONG WITH MICRO-STRUCTURE PHOTOGRAPH. A SEPERATE COPY TO BE SENT TO D.G.M(RS&RS) AT THE TIME OF DELIVERY. 4) THE ROLLS SHALL BE GUARANTEED AGAINST MANUFACTURING DEFECTS SUCH AS BLOW HOLES
CAVITY
NON-METALLIC INCLUSIONS
PIPE SEGREGATION
CRACKS
HARD SPOTS
FLAKES ETC WHICH MAY ADVERSELY AFFECT THEIR SERVICE LIFE. 5) SHOULD ANY ROLL FAIL PREMATURELY OR GIVE SUB-STANDARD PERFORMANCE DUE TO THE ABOVE DEFECTS
THE SUPPLIERS SHALL RECTIFY THE DEFECTS AT THEIR COST WHEREVER POSSIBLE TO THE ENTIRE SATISFACTION OF VSP OR MAKE PRORATA COMPENSATION OR MAKE FULL REPLACEMENT IF THE ROLL HAS BEEN REJECTED BEFORE USE. 6) THE ROLLS ARE ALSO TO BE GUARANTEED FOR THE ROLL LIFE AS MENTIONED OR 5 YEARS FROM THE DATE OF SUPPLY TO VSP WHICH EVER IS EARLIER.THIS GUARANTEE CLAUSE SUPERSEEDS
GUARANTEE MENTIONED ELSEWHERE IN THE A/T
IN THIS REGARD. THESE ROLLS ARE USED IN HOT ROLLING MILL
ROLL MATERIAL SG CAST IRON (ACCICULAR) HARDNESS 70-75° SHORE C DRAWING REFERENCE 1-4012884
REV-D STAND NO BAR MILL 20 & 22 SIZE 360 x 600 mm BARREL HARDNESS 70-75 SHC ROLL APPROXIMATE UNIT WEIGHT 0.70 TONS NECK HARDNESS 38-45 SHC NECK RUN OUT BETWEEN CENTRES 0.04 mm ROLL COATING ANTI-CORROSIVE COATING DROP IN HARDNESS 1 SHC PER 10mm ON BARREL DEPTH ---------------- --------------------- SPECIAL INSTRUCTIONS: ------------------------------- ------ 1) FLAT WOBBLERS TO BE STRICTLY CONCENTRIC WITH ROLL NECK JOURNALS. 2) ROLLS TO BE SUITABLY PACKED AND NUMBERED FOR IDENTITY. 3) T.C. TO BE GIVEN ALONG WITH MICRO-STRUCTURE PHOTOGRAPH. A SEPERATE COPY TO BE SENT TO D.G.M(RS&RS) AT THE TIME OF DELIVERY. 4) THE ROLLS SHALL BE GUARANTEED AGAINST MANUFACTURING DEFECTS SUCH AS BLOW HOLES
CAVITY
NON-METALLIC INCLUSIONS
PIPE SEGREGATION
CRACKS
HARD SPOTS
FLAKES ETC WHICH MAY ADVERSELY AFFECT THEIR SERVICE LIFE. 5) SHOULD ANY ROLL FAIL PREMATURELY OR GIVE SUB-STANDARD PERFORMANCE DUE TO THE ABOVE DEFECTS
THE SUPPLIERS SHALL RECTIFY THE DEFECTS AT THEIR COST WHEREVER POSSIBLE TO THE ENTIRE SATISFACTION OF VSP OR MAKE PRORATA COMPENSATION OR MAKE FULL REPLACEMENT IF THE ROLL HAS BEEN REJECTED BEFORE USE. 6) THE ROLLS ARE ALSO TO BE GUARANTEED FOR THE ROLL LIFE AS MENTIONED OR 5 YEARS FROM THE DATE OF SUPPLY TO VSP WHICH EVER IS EARLIER.THIS GUARANTEE CLAUSE SUPERSEEDS
GUARANTEE MENTIONED Bid Details 2/23 ELSEWHERE IN THE A/T
IN THIS REGARD. 7) THESE ROLLS ARE USED IN HOT ROLLING MILL .
ROLL MATERIAL SG CAST IRON (ACCICULAR) HARDNESS 70-75° SHORE C DRAWING REFERENCE 0-8030440
REV-F STAND NO WRM 11 TO 13 SIZE 375 x 740 mm BARREL HARDNESS 70-75 SHC ROLL APPROXIMATE UNIT WEIGHT 0.79 TONS NECK HARDNESS 38-44 SHC NECK RUN OUT BET CENTRES 0.04 mm ROLL COATING ANTI-CORROSIVE COATING HARDNESS DROP 1 SHC PER 10 mm ON BARREL DEPTH ------------------------------------ SPECIAL INSTRUCTIONS: ------------------------------------ 1) FLAT WOBBLERS TO BE STRICTLY CONCENTRIC WITH ROLL NECK JOURNALS. 2) ROLLS TO BE SUITABLY PACKED AND NUMBERED FOR IDENTITY. 3) T.C. TO BE GIVEN ALONG WITH MICRO-STRUCTURE PHOTOGRAPH. A SEPERATE COPY TO BE SENT TO D.G.M(RS&RS) AT THE TIME OF DELIVERY. 4) THE ROLLS SHALL BE GUARANTEED AGAINST MANUFACTURING DEFECTS SUCH AS BLOW HOLES
CAVITY
NON-METALLIC INCLUSIONS
PIPE SEGREGATION
CRACKS
HARD SPOTS
FLAKES ETC WHICH MAY ADVERSELY AFFECT THEIR SERVICE LIFE. 5) SHOULD ANY ROLL FAIL PREMATURELY OR GIVE SUB-STANDARD PERFORMANCE DUE TO THE ABOVE DEFECTS
THE SUPPLIERS SHALL RECTIFY THE DEFECTS AT THEIR COST WHEREVER POSSIBLE TO THE ENTIRE SATISFACTION OF VSP OR MAKE PRORATA COMPENSATION OR MAKE FULL REPLACEMENT IF THE ROLL HAS BEEN REJECTED BEFORE USE. 6) THE ROLLS ARE ALSO TO BE GUARANTEED FOR THE ROLL LIFE AS MENTIONED OR 5 YEARS FROM THE DATE OF SUPPLY TO VSP WHICH EVER IS EARLIER.THIS GUARANTEE CLAUSE SUPERSEEDS
GUARANTEE MENTIONED ELSEWHERE IN THE PO(A/T)
IN THIS REGARD. 7) THESE ROLLS ARE USED IN HOT ROLLING MILL.
ROLL MATERIAL ALLOY CAST STEEL HARDNESS 45-50° SHORE C DRAWING REFERENCE 1-51100
REV-D TENSILE STRENGTH 740-960 N/SQ.MM STAND NO MMSM 6 TO 14 SIZE 680 x 1000 mm BARREL HARDNESS 45-50 SHC ROLL APPROXIMATE UNIT WEIGHT 4.09 TONS UTS 740-960 N/SQ.MM NECK HARDNESS 38-43 SHC ROLL COATING ANTI-CORROSIVE NECK RUN-OUT BET CENTRES 0.04 MM ------------------------------------- SPECIAL INSTRUCTIONS: ------------------------------------- 1) ULTRASONIC
UTS & ELONGATION TESTS SHALL BE DONE AND CERTIFIED. 2) FLAT WOBBLERS TO BE STRICTLY CONCENTRIC WITH ROLL NECK JOURNALS. 3) ROLLS TO BE SUITABLY PACKED AND NUMBERED FOR IDENTITY. 4) THE MICROSTRUCTURE SHOULD BE FREE FROM CONTINUOUS NETWORK OF CARBIDES ALONG THE GRAIN BOUNDARIES. 5) T.C. TO BE GIVEN ALONG WITH MICRO-STRUCTURE PHOTOGRAPH. A SEPERATE COPY TO BE SENT TO D.G.M(RS&RS) AT THE TIME OF DELIVERY. 6) THE ROLLS SHALL BE GUARANTEED AGAINST MANUFACTURING DEFECTS SUCH AS BLOW HOLES
CAVITY
NON-METALLIC INCLUSIONS
PIPE SEGREGATION
CRACKS
HARD SPOTS
FLAKES ETC WHICH MAY ADVERSELY AFFECT THEIR SERVICE LIFE. 7) SHOULD ANY ROLL FAIL PREMATURELY OR GIVE SUB-STANDARD PERFORMANCE DUE TO THE ABOVE DEFECTS
THE SUPPLIERS SHALL RECTIFY THE DEFECTS AT THEIR COST WHEREVER POSSIBLE TO THE ENTIRE SATISFACTION OF VSP OR MAKE PRORATA COMPENSATION OR MAKE FULL REPLACEMENT IF THE ROLL HAS BEEN REJECTED BEFORE USE. 8) THE ROLLS ARE ALSO TO BE GUARANTEED FOR THE ROLL LIFE AS MENTIONED OR 5 YEARS FROM THE DATE OF SUPPLY TO VSP WHICH EVER IS EARLIER.THIS GUARANTEE CLAUSE SUPERSEEDS
GUARANTEE MENTIONED ELSEWHERE IN THE PO(A/T)
IN Bid Details 3/23
8846846
GEM/2026/B/7117383
Two Packet Bid
2003655
GeM Contract
Andhra Pradesh; Visakhapatanam
Item wise evaluation
BOQ
Awarded to BEHARI LAL ENGINEERING LIMITED
₹21.6 L
| Product | Brand / Model | HSN | Quantity | Unit Price | Amount |
|---|---|---|---|---|---|
| 2003737 | BLEL / Schedule8-2003737 | 84553000 | 2 pieces | 1,079,045 | 2,158,090 |
Awarded to BANSAL ALLOYS AND METALS PRIVATE LIMITED
₹7 L
| Product | Brand / Model | HSN | Quantity | Unit Price | Amount |
|---|---|---|---|---|---|
| 2003734 | BANSAL / 2003734 | 84553000 | 1 pieces | 700,000 | 700,000 |
Awarded to SHAIFALI STEELS LIMITED
₹37.3 L
| Product | Brand / Model | HSN | Quantity | Unit Price | Amount |
|---|---|---|---|---|---|
| 2003736 | SHAIFALI STEELS LIMITED / 815X1000mm | 84551000 | 2 pieces | 1,058,238 | 2,116,476 |
| 2003733 | SHAIFALI STEELS LIMITED / 680X1000mm | 84551000 | 2 pieces | 806,028 | 1,612,056 |
Awarded to DEEM ROLL-TECH LIMITED
₹51.3 L
| Product | Brand / Model | HSN | Quantity | Unit Price | Amount |
|---|---|---|---|---|---|
| 2003717 | DEEM ROLL-TECH LIMITED / 2003717 | 84553000 | 2 pieces | 203,894 | 407,788 |
| 2114152 | DEEM ROLL-TECH LIMITED / 2114152 | 84553000 | 2 pieces | 756,779 | 1,513,558 |
| 2003690 | DEEM ROLL-TECH LIMITED / 2003690 | 84553000 | 2 pieces | 180,992 | 361,984 |
| 2003655 | DEEM ROLL-TECH LIMITED / 2003655 | 84553000 | 2 pieces | 1,425,327 | 2,850,654 |
Awarded to BHARAT ROLL INDUSTRY PVT LTD
₹39.5 L
| Product | Brand / Model | HSN | Quantity | Unit Price | Amount |
|---|---|---|---|---|---|
| 2003708 | BRI / VSP-SCHEDULE-3 | 84553000 | 2 pieces | 180,357 | 360,714 |
| 2003690 | BRI / VSP-SCHEDULE-2 | 84553000 | 4 pieces | 180,992 | 723,968 |
| 2003717 | BRI / VSP-SCHEDULE-4 | 84553000 | 2 pieces | 203,894 | 407,788 |
| 2003738 | BRI / VSP-SCHEDULE-9 | 84553000 | 1 pieces | 941,355 | 941,355 |
| 2114152 | BRI / VSP-SCHEDULE-10 | 84553000 | 2 pieces | 756,779 | 1,513,558 |
3 documents required · 3 mandatory
Rashtriya Ispat Nigam Limited, VISAKHAPATNAM STEEL PLANT, Rashtriya Ispat Nigam Limited, Rashtriya Ispat Nigam Limited, Ministry of Steel, (Rashtriya Ispat Nigam Limited)
Exempted
23 Feb 2026
23 Jan 2026
2 Feb 2026
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | 2003655 | ROLL ACS40-45 1-D22939 RC850X1200mm | 2 | pieces | stores1.gem | 90 |
| 2 | 2003690 | ROLL SGAC70-75 1-4012885 RE360X600mm | 6 | pieces | stores1.gem | 120 |
| 3 | 2003708 | ROLL SGAC70-75 1-4012884 RD360X600mm | 2 | pieces | stores1.gem | 90 |
| 4 | 2003717 | ROLL SGAC70-75 0-8030440 RF375X740mm | 4 | pieces | stores1.gem | 120 |
| 5 | 2003733 | ROLL ACS45-50 1-51100 RD680X1000mm | 2 | pieces | stores1.gem | 90 |
| 6 | 2003734 | ROLL ACS45-50 1-51100 RD695X1000mm | 1 | pieces | stores1.gem | 90 |
| 7 | 2003736 | ROLL ACS45-50 1-51100 RD815X1000mm | 2 | pieces | stores1.gem | 90 |
| 8 | 2003737 | ROLL ACS45-50 1-51100 RD825X1000mm | 2 | pieces | stores1.gem | 90 |
| 9 | 2003738 | ROLL ACS45-50 1-51100 RD760X1000mm | 1 | pieces | stores1.gem | 90 |
| 10 | 2114152 | ROLL STEELBASE47-50 750X900mm | 4 | pieces | stores1.gem | 120 |
contract_GEMC-511687715654737.pdf
GEM_CONTRACT • 0.06 MB
contract_GEMC-511687747321071.pdf
GEM_CONTRACT
contract_GEMC-511687722551710.pdf
GEM_CONTRACT
contract_GEMC-511687763016026.pdf
GEM_CONTRACT
contract_GEMC-511687704779701.pdf
GEM_CONTRACT
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_8846846.pdf
GEM_BID
rolls_final_spec_with_drawings_final_2026-01-14-12-50-49_22593c9dc4929bb3e46c7a24a5194c96.pdf
BOQ
boq_item_41003071_2026-01-14-12-50-49_d9a94b869552ae80a2483adb4d87bfed.csv
BOQ
ip_8ddc74ac-ad0d-4018-b6441768994922627_group68buyer2.pdf
OTHER
ATCATC_dfbfe620-f6db-4b0c-9c971769141099595_group68buyer2.pdf
OTHER
list-of-categories-where-trials-are-allowed_1712126171.pdf
OTHER
gtc.pdf
OTHER
ip_8ddc74ac-ad0d-4018-b6441768994922627_group68buyer2.pdf
GEM_OTHER • 0.04 MB
ATCATC_dfbfe620-f6db-4b0c-9c971769141099595_group68buyer2.pdf
GEM_OTHER • 0.11 MB
list-of-categories-where-trials-are-allowed_1712126171.pdf
GEM_OTHER • 0.52 MB
gtc.pdf
GEM_OTHER • 0.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .