Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.1 LAccepted-AOC | ₹8.1 L | L1 | Accepted-AOC L1 |
| 2 | L2₹8.2 LRejected-AOC | ₹8.2 L | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | SHIHABUDDEEN.PK L1 | Muhammed Shabeeb N L2 |
|---|---|---|---|---|---|
| 1.00ICDS Cell | |||||
| 1.00 | OD137219/2024-2025:Providing and fixing plywood 18mm thick (Marine grade 710, 70 % Gurjan) conforming to as per IS: specification for plain lining/cladding with necessary screws including cost o all charges (Data vide 9.37.1 of DSOR, DAR Civil) | 158.75 | sqm | 2,015.71 ₹3.2 L | 2,063.07 ₹3.3 L |
| 1.00 | 9.90.2:Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 50 mm | 40 | no | 284.94 ₹11,397.60 | 291.63 ₹11,665.20 |
| 1.00 | 9.165.2:Providing and fixing bright /matt finished Stainless Steel handles of approved
quality & make with necessary screws etc all complete.100mm | 65 | no | 75.35 ₹4,897.75 | 77.12 ₹5,012.80 |
| 1.00 | 9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge. | 20 | set | 353.32 ₹7,066.40 | 361.62 ₹7,232.40 |
| 1.00 | 9.59.3:Providing and fixing ISI marked oxidised M.S. single acting spring hinges with
necessary screws etc. complete. (Copper oxidized as per IS 1378).100mm | 90 | no | 195.73 ₹17,615.70 | 200.33 ₹18,029.70 |
| 1.01 | 9.127.2:Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.0 mm thick | 317.51 | sqm | 760.32 ₹2.4 L | 778.18 ₹2.5 L |
| 1.01 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 57.61 | kg | 464.04 ₹26,735.20 | 474.94 ₹27,363.19 |
| 1.01 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 8.91 | kg | 562.06 ₹5,010.20 | 575.26 ₹5,127.87 |
| 1.01 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 15.34 | sqm | 960.47 ₹14,729.77 | 983.03 ₹15,075.75 |
Tender Value
₹9.3 L
EMD Value
₹23,301
Closing Date
19 May 2026, 11:00 amClosed
Assistant Executive Engineer
O/oAEE, PWD Buildings sub division Manjeri
DEPOSIT-Women and Child Development D e p a r t m e n t , I C D S C e l l B 1 b l o c k - Modernisation works to ICDS cell Office at B1 block in Civil station Malappuram-General Civil Work
2026_PWD_850028_1
D1/PWD/BLDG/TR/17137/2024_ 5_1_1
Open Tender
Civil Works - Buildings
240 days
Malappuram
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,055
Yes
₹23,301
Yes
17 Jun 2026
11 May 2026
21 May 2026
11 May 2026
19 May 2026
11 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1ICDS Cell | ||||||
| 1.001 | OD137219/2024-2025:Providing and fixing plywood 18mm thick (Marine grade 710, 70 % Gurjan) conforming to as per IS: specification for plain lining/cladding with necessary screws including cost o all charges (Data vide 9.37.1 of DSOR, DAR Civil) | 1 | sqm | - | - | BI01010001010000000000000515BI0100001114 |
| 1.002 | 9.90.2:Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 50 mm | - | no | - | - | BI01010001010000000000000515BI0100001115 |
| 1.003 | 9.165.2:Providing and fixing bright /matt finished Stainless Steel handles of approved
quality & make with necessary screws etc all complete.100mm | - | no | - | - | BI01010001010000000000000515BI0100001116 |
| 1.004 | 9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge. | - | set | - | - | BI01010001010000000000000515BI0100001117 |
| 1.005 | 9.59.3:Providing and fixing ISI marked oxidised M.S. single acting spring hinges with
necessary screws etc. complete. (Copper oxidized as per IS 1378).100mm | - | no | - | - | BI01010001010000000000000515BI0100001118 |
| 1.006 | 9.127.2:Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.0 mm thick | 1 | sqm | - | - | BI01010001010000000000000515BI0100001119 |
| 1.007 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 1 | kg | - | - | BI01010001010000000000000515BI0100001120 |
| 1.008 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 1 | kg | - | - | BI01010001010000000000000515BI0100001121 |
| 1.009 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | - | sqm | - | - | BI01010001010000000000000515BI0100001122 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1436309.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1436309.xls
BOQ • 0.31 MB
viewsbdmerged.pdf
Tender Documents • 1.89 MB
epayform.pdf
Tender Documents • 0.16 MB
Affidavit.pdf
Tender Documents • 0.41 MB
form.pdf
Tender Documents • 0.18 MB
pact.pdf
Tender Documents • 0.05 MB
PA.pdf
Tender Documents • 0.30 MB
Download all tender documents and submit your bid