DAY TO DAY MAINT AND PERIODICAL SERVICES TO AMBC BUILDING AND INHS NAVJIVANI UNDER AGE BR II MAINT AT INA EZHIMALA

Amount

Notes:- (i) The scope of work is to be carried out from ground level to nearly upto 45 metres of height. (ii) Quoted rates are deemed to be inclusive of scaffolding/boom lift/crane as required. Contractors should arrange necessary scaffolding/ boomlift/crane and takes all safety precautions for workers at the time of carrying out works as described in Sch 'A'/ BOQ. (iii) Contractor should visit the site before quoting the tender to assess the resources required to execute the work as the site include prestigeous buildings of INA. (iv) Quoted rates included using mechanical means for surface preparation and application of paint as per manufacturer's instruction all as specified and directed by Engg-in-Charge. (v) The work may be carried out at different location and in different measurement/ touch ups even it is below 1 Sqm or othewise. (vi) Quoted rates includes for cleaning of paint stains on floor/window/joinery surfaces. (vii) Cost of all factors are deemed to be included in the rate quoted in BOQ. No extra claim will be entertained on this account. (viii) All debris, unserviceable items shall be removed from site and thrown away at dumping area outside INA area upto a distance of 10.00 Kms where directed. Loading, Unloading , staking and transportation charges are included in relevent items of taking down or demolition / dismantling. All debris should be taken outside of INA Campus and if any debris found dumped inside INA campus, a fine of Rs 5000.00 per load or per Cum will be recovered from contractor.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed.

Taking down chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frame) complete all as specified and as directed.

S & F 150 mm anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S & F 100mm butt hinges cast brass, with mild steel hinge pin, bright polished and fixed type B-11 complete all as specified and as directed.

S & F in repairs 150 mm anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S & F in repairs 100 mm mild steel butt hinges, cold rolled medium weight complete all as specified and as directed.

S & F in repairs 150mm extruded anodised aluminium alloy handles fabricated type complete all as specified and as directed.

S & F in repairs Mortice lock brass body, 100 mm, 4 levers vertical type complete all as specified and as directed.

S & F in repairs 75 mm hasp and staple mild steel safety type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F in repair floor door stopper 150mm size aluminium alloy body and tongue double legged, anodised with hard drawn steel spring fixed to door complete all as specified and as directed.

S & F in repairs aluminum (die cast) body door closer hydraulically regulated designation No. 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

S & F in repair aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples complete all as specified and as directed.

M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S & F in repairs 75mm long anodised aluminium handle cum lock for sliding window/ventilator shutter complete all as specified and as directed.

S & F in repairs mild steel friction hinges suitable for window/ ventilator shutters complete all as specified and as directed.

Taking down aluminium shutters exc 1.00 sqm and n exc 2sqm each (without taking out frame) and refixing in the same positon after carrying out repairs and provision of aluminum tie rod at top and bottom rails complete all as specified and as directed.

M&L for aluminium powder coated windows and ventilator shutters etc. side hung type without sash bars, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F aluminium powder coated door shutter, side hung type aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F aluminium powder coated frame for partitions, doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ any thickness including cover fillets complete all as specified and as directed.

M&L for providing polyester foil coated aluminium alloy (metal planks) for false ceiling as per manufacturer's instructions and all as specified.

All as per item ser No. 23 above but fixing only complete all as specified and as directed.

S&F in repair anodised aluminium snap grid frame work for false ceiling with 605mmx605mm size, consisting of main tee of size 123.50mmx36.50mmx1.50 mm, cross tee of size 23.50mmx 23.50mmx1.50mm and wall angle of size 1.50 x1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in pesition with and including steel hangers 6 mm dia G.I. wire upto 1200 mm end level fixed to roof slabs by means of ceiling cleats made out of G.I. size 60 mm long and expansion hold fasteners 40 mm long in soffit slab/walls with and including 4mm thick non-abestos fibre cement building boards panels 600mmx600mm size including taking down of old false ceiling complete all as specified and as directed.

S&F in repair 18/19mm thick pre-laminated particle board exterior grade, one side decorative choice lamination and other side balancing white lamination, fixed with screws to wooden / aluminium frame work as in cupboard shutters complete all as specified and as directed.

S&F in repair 9mm thick pre-laminated particle board exterior grade, one side decorative choice lamination and other side balancing white lamination, fixed with screws to wooden / aluminium frame work as in cupboard shutters complete all as specified and as directed.

M & L for 4mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing with beading complete all as specified and as directed.

M & L for 5.5 mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing with beading complete all as specified and as directed.

S & F in repair vitreous china wash basin, white/coloured (flat back) 550x400mm excluding pillar tap, but including fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repairs pillar taps 15 mm size (with push button fancy type) cast copper alloy, chromium plated screwed down high pressure screwed for iron pipe & fixed complete all as specified and as directed.

S&F in repair vitreous china, wash down water closet (EWC) with seat cover white/coloured, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal DEMBABC 6 Each pattern), cascade type including flushing cistern, light coloured, with seat cover closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device etc including connection to drain (or outgoing pipe) and to flushing pipe complete all as specified and as directed. Make:- Parryware Cat No. C022Z or equivalent in Hindware/ Cera/ Jaguar.

S&F in repairs vitreous china half stall urinal, light coloured of size 580mm x 380mm x 350mm complete with chromium plated waste fittings including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement, (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S & F in repair vitreous china vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.

S & F plastic seat cover (colour) closed pattern with flat bottom suitable for EWC including taking down old cover complete all as specified and as directed.

S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets complete all as specified and as directed.

S & F in repairs 15mm bore chromium plated bib taps (with push button fancy type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repair angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and as directed.

S & F in repair chromium plated towel ring complete all as specified and as directed.

S & F in repair 20mm dia, D type, 60cm long cast copper alloy, chromium plated towel rail complete all as specified and as directed.

S & F in repair cast copper alloy, chromium plated toilet paper holder complete all as specified and as directed.

S & F in repair chromium plated soap tray fixed with stainless steel screws complete all as specified and as directed.

S & F in repair chromium plated health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repair cast copper alloy, chromium plated waste coupling with long shank, half thread, 32 mm dia, for WHB etc. complete all as specified and as directed.

Taking up or down steel tubing and connections, 15mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm dia complete all as specified and as directed.

S&F 15/16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S & F in repairs 32mm dia PVC flexible waste pipe for urinals/ WHB/ sink etc complete all as specified and as directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F in repair PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F in repair PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F in repair 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

Demolition of brick work, PCC block or stone masonry built in cement mortar complete all as specified and as directed.

M & L for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (20mm graded aggregate) exc 10 cm in width and set in cement mortar 1:6 complete all as specified and as directed.

All as per item No.57 above but except PCC blocks complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish of the premises complete all as specified and as directed.

M & L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.06 sqm but n.exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L for Glazed ceramic coloured tiles 350x250x7mm / 450x 350x7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.

M&L for vitrified colourd ceramic tiles 10mm thick (square/ rectangular), light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set with or without spacers and jointed in neat cement slurry and pointed in white or coloured cement /epoxy to match the shade including 20mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match of light shade including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.

Dismantling stone slab and tiles of any description or thickness in floors, landings aprons etc.. laid bedded and pointed in any mortar complete all as specified and as directed.

M & L for chequered cement concrete tiles 250x250x25mm / 300x 300x25mm thick in floors, with mixture of grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for marble (Makrana Doogri) of approved shade, 18-20 mm thick, machine cut (cut to size in square shape) laid over & including 20 mm thick (average thickness) cement mortar (1:4) screed bedded and jointed with white cement slurry and pointed with grout of matching shade including all necessary cutting & waste and machine polishing (Mirror finish), in floors complete all as specified and as directed.

M&L for machine cut granite stone slab 20mm thick of approved colour and shade as in floors laid over 20mm thick screed bed in CM 1:6, and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and as directed.

M&L for 25mm thick flame finished sadarhalli machine cut stone of approved colour and shade as in floors, skirting/dado etc over and including 15mm thick backing coat in CM 1:4, laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab complete all as specified and as directed.

M & L for machine cut kota stone slab flooring with 20-25mm thick over and including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting-dado and pillar laid, jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab over and including 15 mm thick backing coat in CM 1:4 complete all as specified and as directed.

Rounding to edges of stone slabs to one edge, such as in steps and other similiar situations complete all as specified and as directed.

M&L for stone grit for cushion bed below interlocking paver blocks complete all as specified and directed by Engineer in charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 grade with gray cement and pigment complete all as specified and as directed.

All as per item No.74 above but except tiles complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or concrete surfaces including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M & L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed.

M & L for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion distemper over a coat of chalk whiting complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed.

Cleaning of choked particle from filter system of automatic sensor urinal unit removing top cover of urinal and cleaning automatic sensor unit for removing dust particle etc and making the unit in serviceable condition complete all as specified and as directed.

Taking down defective/damaged water storage tank cover of existing water tank and supply & fix polyethylene tank cover with necessary locking arrangement complete all as specified and directed at site.

S & F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as speciifed in SSR Part I of capacity 500 ltrs with ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed with dia of pipe 25mm complete all as specified and as directed.

All as per item No.83 above but 1000 ltr capacity complete all as specified and as directed.

S&F in repairs 20 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 25 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 25 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F urinal spreader of brass chromium plated and flush cock (lever type) of 25mm size complete all as specified and as directed. Make:- Cat Part No. KBEA -32 of Prayag or equivalent in Parryware/Hindware/ Cera/Jaguar.

S&F in repairs flush kit of low level flushing cistern of cascade type WC complete all as specified and as directed.

S&F in repair aluminium composite panel 4mm thick of any colour and shade fixed with self tapping screws on existing aluminium frame work complete all as specified and directed by Engineer-in-Charge.

S&F in repair toughened glass 12mm thick fixed to aluminium frame work including necessary fixing accessories complete all as specified and directed by Engineer-in-Charge.

M&L for 12mm thick plywood, grade BWP, type BB fixed with screws to aluminium frame work with 3mm thick decorative face veneer of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions and all as directed by Engineer-in-Charge.

Dismantling Luxalon 84R Hi mirror false ceiling system consisting of panel 84mm wide x 16 mm deep made out of 0.5mm thick anodised aluminium of chrome finish at a height approximately 25m from the ground level at foyer of AMBC Nalandha Bldg complete all as specified and directed by Engineer- in- Charge.

Fixing only Luxalon 84R Hi mirror false ceiling system consisting of panel 84mm wide x 16 mm deep made out of 0.5mm thick anodised aluminium of chrome finish serviceable ceiling system obtained from SI item No 93 shall be used complete all as specified and as directed.

S&F Luxalon 84R Hi mirror false ceiling system consisting of panel 84mm wide x 16 mm deep made out of 0.5mm thick anodised aluminium of chrome finish. The panel should be chipped to a baked enamelled aluminium panel carrier made out of 0.95mm thick already fixed at a height more than 25m from floor level complete all as specified and as directed.

S&F in repairs GI suspension rod of 4mm dia where ever required to support the panel carriers suspended from ceiling for fixing the false ceiling at foyer of Nalandha Bldg at AMBC as required and directed by Engineer in charge.

M&L for pre laminated wooden flooring 8mm thick and panel size 120cm x 19 cm / 180 cm x 19 cm matching with existing flooring complete all as specified and as per manufacturer's instructions.

M&L for pre laminated wooden flooring skirting 70 mm width matching with existing laminated wooden flooring complete all as specified and as per manufacturer's instructions.

Repairs/replacement to safety lever locks mild steel with levers for rolling shutters of area not exceeding 15 Sqm complete all as specified and as directed.

Repairs/replacement to MS spring for rolling shutters and applying grease on steel surfaces in side channels for smooth functioning of all steel members for rolling shutters of area not exceeding 15 Sqm complete all as specified and as directed.

Repairs/replacement to interlocking lath section and ball bearing on either side of rolling shutters of area not exceeding 15 Sqm complete all as specified and as directed.

Repairs/replacement to MS tie rod for rolling shutters of area not exceeding 15 Sqm complete all as specified and as directed.

Repairs/replacement to MS push plate for rolling shutters of area not exceeding 15 Sqm complete all as specified and as directed.

M&L for plastering in patches, area not exc. 1.5 sqm with cement mortar 1:4 as in wall/ceiling and matching with surrounding surfaces including taking down damaged portion complete all as specified and as directed.

M&L for plastering in patches, area not exc. 1.5 sqm with cement mortar 1:6 as in wall/ceiling and matching with surrounding surfaces including taking down damaged portion complete all as specified and as directed.

M&L in patches for cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) area n.exc 02 Sqm to repair damages in floor, plinth protection, roof gola, path and similiar work etc complete all as specified and as directed.

M&L for preparation of old decorated surfaces and applying one coat of acrylic emulsion paint interior grade (Apcolite of Asian paints or equivalent make in Berger/Shalimar) on wall all as specified, as per manufacturer's instructions and as directed.

M&L for complete removal of existing surface by scrapping of walls including cornices/pillars etc. by brooming down and applying two coats of acrylic emulsion paint interior grade (Apcolite of Asian paints or equivalent make in Berger/Shalimar) over a coat of emulsion primer over a coat of wall putty of uniform finish complete all as specified and as directed.

M&L for preparation of old decorated surfaces and applying one coat of sandtex matt finish on wall all as specified and as per manufacturer's instructions.

M&L for complete removal of existing surface by scrapping of walls including cornices/ pillars etc. by brooming down and applying two coats of sandtex matt finish on walls over a coat of primer over a coat of external wall putty of uniform finish complete all as specified and as directed.

M&L for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on ceiling including necessary scaffolding all as specified and as per manufacturer's instructions.

M&L for preparation of old decorated surfaces and applying one coat of white wash on ceiling all as specified and as per manufacturer's instructions.

M&L for preparation of old painted steel/iron surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of epoxy paint complete all as specified and as directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old works with one or more coats complete all as specified and as directed.

M&L for preparation of old treated mangalore pattern roof tile surfaces by cleaning with by wire brushes to remove all existing fungal growth etc and applying one coat of antifungal paint complete all as specified, as directed and as per manufacturer's instructions.

M&L for preparation of old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for removing shrubs, vegetation, roots etc.. from external wall surfaces , by dismantling brick work, RCC or taking down plastering as the case may be, including dismantling SWR pipes, OH PVC service tanks etc. and refixing the same in original position and making good the surface dismantled all as specified and as directed by Engr-in-charge. Note:- Area to be dismantled exc 1 Sqm and not exc 3 Sqm.

M&L for treating holes cracks etc. up to 10 mm making V groove using pattil blades and filling the cracks with ready to use crack fillers and allowed to dry complete all as specified and as directed.

SANDR (BID ID -3077574)

KDR CONSTRUCTION (BID ID -3081801)