KMC/S_D/KGPS-49/25-26

ROOFING & SHEETWALLING 14. Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet

FABRICATION, SUPPLY, STORING AT SITE, INSTALLLATION & COMMISSIONING OF TRASH/ BAR SCREEN/ GRATING CONFORMONG TO RELEVENT IS CODES (IS:11388,IS:800, IS:2062 FABRICATED WITH STRUCTURAL STEEL SECTIONS SUCH AS MS FLAT, CHANNELS, ANGLES ETC. INCLUDING COST OF MATERIALS, MACHINARY, LABOUR, CUTTING, ALIGING, WELDING AS PER APPROVED DRAWING INCLUDING TRANSPORTATION CHARGES AS PER DIRECTION. IRRIGATION & WATERWAYS DEPARTMENT USOR (M&E) SCH. 2022; CHAPTER - 5.2, PAGE -100, SL NO.- 5.2.15

Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. (This item should be executed only after prior approval of the Engineer-incharge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each time to be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly a) 3.90 metre height

Labour Rates Per Diem : 3)Mazdoor (Male).

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white)