Open Space development and Beautification Work (Phase-1) Below Shreenathji Flyover Bridge in East (Varachha) Zone-A.(2nd Attempt)

NAME OF WORK :- Open Space development and Beautification Work (Phase-1) Below Shreenathji Flyover Bridge in East

(Varachha) Zone-A.(2nd Attempt).

DESCRIPTION QTY. RATE UNIT AMOUNT

(A) AREA DEVELOPMENT WORK

Excavating the road surface upto required depth include, removing the

1 excavated materials and depositing on the road side up to 50 mt lead etc. 1447.00 104.20 C.M.

completed and as directed by engineer in charge.

Excavation for foundation including sorting out and stacking off useful materials

2 and disposing of the excavated stuff up to 50 mt. lead and all lift, watering

etc.comp. Executed With Mechanised Efforts / Machinaries

( 1 ) up to 1.5 mt. Depth 0.00 117.26 C.M.

Excavation for foundation includ.sorting out & stacking of useful materials

3 &disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.Comp.

(A) Loose or Soft soil Executed With Manual Labours

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of the

4 surplus excavated soil as directed within a lead of 50 M.For following diameter

loose or soft soil

for 200 mm dia 2.00 289.53 R.MT

for 250 mm dia 30.00 326.84 R.MT

for 300 mm dia 30.00 391.74 R.MT

Preparation of subgrade with compacting, Leveling and consolidation of

5 subgrade with miniroller/plate vibrator machine including watering and filling 3333.00 4.93 S.M.

in depression occur the process as directed by engineer in charge.

Providing & laying Granular Sub Base confirming to Grading II of Table 400.2 of

compacted th. Of 75 mm with specified graded stone metal and sand mixed in

place and laid with mechanical means spreading with motor grader and

compactiong with vibratory roller having miimum 80-100 KN static weight to

achieve desired dencity of 98 % of MDD including all material, labour,

machinery with all leads and lifts etc. comp.

Providing Dry Rubble Soilling of various thicknessto required grade including

7 trimming of earth work hand packing the interstics with Quarry Spalls complete 8.00 1064.80 C.M.

for all leads and lifts.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

8 20m.m Nominal size)&curing comp. incl. cost of form work in :(a) foundation & 503.00 3005.76 C.M.

Providing and laying cement concrete 1: 4: 8 (1 cement : 4coarse sand :8 graded

9 stone aggregates 40 mm nominal size) and curing complete including cost of

(A) Foundation and plinth 0.00 2680.21 C.M.

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand: 3 graded

10 stone agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld. Cost of

form work but excl. Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1) Having cross sectional area upto 0.08

upto G.L./P.L. 1.00 12632.60 C.M.

(2) Having cross sectional area more than 0.08 and up to 0.12 sq. mt .

upto G.L./P.L. 2.00 11166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

upto G.L./P.L. 2.00 9201.68 C.M.

(1) Having cross sectional area upto 0.08 sm.

upto G.L./P.L. 1.00 9102.61 C.M.

(2) Having cross sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

upto G.L./P.L. 1.00 8,174.41 C.M.

(3) Having cross sectional area more than 0.12 sq.mt.

upto G.L./P.L. 1.00 7086.88 C.M.

upto to G.L./P.L. 1.00 10831.75 C.M.

Filling in trenches with available excavated earth in layer not exceeding 20 cm in

depth consolidating each deposited layer by ramming & watering

Providing & filling in plinth with yellow soil or selected soil in layers of 20 cm.

Th'. Incl. watering, ramming & consolidation etc. complete.

providing and laying 200 micron (LDPA) plastic sheet on prepared sub base as

per instruction of Engg. In charge etc. complete.

Supplying & filling fine sand (pana) in 75 /100/150mm compacted thickness

over the nbase including necessary compaction, watering etc. compacted. Item

includes levelling byusing vibratory plates compacted machine and as directed

by engineer in charge.

Providing 100mm th. Ready made c.c. kerb of strength M-20 (Size 300mm X

380mm) purchased from SMC's approved paverblock manufacturer & setting in

line level and in truly vertical postion, including filling joints in C.M. 1:1 (1 part

of cement : 1 part of stone dust ) smooth pointing in C.M. 1:1 ( 1 part of cement :

1 part of coarse sand) including watering etc. complete and as directed by

engineer in charge.

R.C.C kerb 380 mm depth and 300 mm width 25.00 228.00 R.MT

Providing and fixing in position Readymade vaccum wet press kerb block

(Height 300mm x Width 600mm x Thickness 125mm) purchased from S.M.C's

aproved paver block manufacturer & setting in line level and in truly vertical

postion, including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone dust

) smooth pointing in C.M. 1:1 ( 1 part of cement : 1 part of coarse sand) including

watering etc. complete and as directed by engineer in charge.

Providing and fixing c.c m-20 grade (Size 300mm X 380mm) purchased from

SMC's approved paverblock manufacturer & setting in line level and in truly

vertical postion, including filling joints in C.M. 1:1 (1 part of cement : 1 part of

17 stone dust ) smooth pointing in C.M. 1:1 ( 1 part of cement : 1 part of coarse 25.00 605.00 R.MT

sand) including watering etc. complete and as directed by engineer in charge.

CHAMFERD EDGE KERB (size & colour as per Architect/Consultant Instruction

Providing 125mm th. Ready made Vacuum wet Pressed c.c. kerb of strength M-

25 (Size 60 Cm x 45 Cm X 12.5 cm) bull nose kerb approved Brand paverblock

manufacturer & setting in line level and in truly vertical postion, including filling

18 joints in C.M. 1:1 (1 part of cement : 1 part of stone dust ) smooth pointing in 1260.00 765.00 R.MT

C.M. 1:1 ( 1 part of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge. (R.C.C kerb 450 mm Height and

125 mm Thickness)

Providing 150mm th. Ready made Vacuum wet Pressed c.c. kerb of strength M-

25 (Size 60 Cm x 77.5 Cm X 15 cm) bull nose kerb approved Brand paverblock

manufacturer & setting in line level and in truly vertical postion, including filling

19 joints in C.M. 1:1 (1 part of cement : 1 part of stone dust ) smooth pointing in 826.00 1058.00 R.MT

C.M. 1:1 ( 1 part of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge. (R.C.C kerb 775 mm Height and

150 mm Thickness)

Providing 150 mm th. Ready made Vacuum wet Pressed c.c. kerb of strength M-

25 (Size 60 Cm x 90 Cm X 15.0 cm) bull nose kerb approved Brand

manufacturer & setting in line level and in truly vertical postion, including filling

20 joints in C.M. 1:1 (1 part of cement : 1 part of stone dust ) smooth pointing in 2095.00 1162.00 R.MT

C.M. 1:1 ( 1 part of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge. (R.C.C kerb 900 mm Height and

150 mm Thickness)

Providing, Lowering & laying of Readymade M-25 Vacuum wet Pressed Water

Drain (Dished) Channel (600 x 300 x 100 mm ) approved Brand manufacturer &

setting in line level and in truly vertical postion, including filling joints in C.M. 1:1

(1 part of cement : 1 part of stone dust ) smooth pointing in C.M. 1:1 ( 1 part of

cement : 1 part of coarse sand) including watering etc. complete and as directed

by engineer in charge.

Providing interlocking type Rubber moulding cement concrete Paver Block of

approved shape, design & colour having 60 mm thickness (M-35) Purchased

from S.M.C's approved paverblock manufactures only & fixing on fine sand

bedding. Item includes leveling by using vibratory plates compacted machine.

Item also includes all materials, labour, equipments, tools, plants, watering,

cleaning etc. Complete

With colour 0.00 524.00 S.M.

Without colour 0.00 524.00 S.M.

Providing and Fixing interlocking M-35 60 mm thick paver block Cobble Square

Shot blasted,Premium sheild protected. The paver block is fixing on 75mm

23 thik.sand bed in proper line,level with watering and compaction etc. as per 3330.00 1085.00 S.M.

directed by engg. and architect colour : Beige, Grey,Dark Grey, Red. (size as per

Architect/Consultant Instruction & Suggesions)

Providing and Fixing interlocking M-35 60 mm thick HSF & ETF paver block The

paver block is fixing on 75mm thik.sand bed in proper line,level with watering

and compaction etc. as per directed by engg. and architect (size & colour as per

Architect/Consultant Instruction & Suggesions)

Providing and Fixing interlocking M-35 80mm thick paver block Grass/eco

paver The paver block is fixing on 75mm thik.sand bed in proper line,level with

watering and compaction etc. as per directed by engg. and architect (size and

color as per Architect/Consultant Instruction & Suggesions)

Painting two coat (excluding priming coat) on kerb & floor surface with

synthetic enemal paint, burshing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matters.

Removing and resetting Existing paver block, including all watering leveling,

27 cleaning, labour & Equipments chagres etc. complete as per details in tender 3.00 102.00 SM

specification & as directed by engineer in charge.

Removing & resetting existing ready made C.C.Kerb of strength of required size

& thickness in line,level and truly vertical position ,including filling joints in

28 C.M.1:1(1part of cement 1 part of coarse sand) smooth pointing in C.M.1:1 (1part 3.00 56.00 RM

of cement : 1 part of stone dust )including watering etc.complete as directed by

engineer-in-charge.

Providing and filling in foundation and plinth with available of Mixed soil or

29 selected soil in layers of 20 cm. thickness including watering, ramming and 0.00 206.00 C.M.

consolidation as directed by engg. incharge etc. comp.

Providing & fixing IS Mark TMT Bar FE500d reinforcement for R.C.C.work incl.

bending, binding & placing in position etc.comp.-

Upto G.L./P.L. 18784.00 76.21 Kg.

Providing & fixing M.S.Grills of required pattern to wooden frames of windows

etc. At all floor levels with M.S. flats at required spacing & frame around square

or round bars with round headed bolts & round headed bolts and nuts or by

screws incl. Priming coat of Red lead paint etc. comp. (For Median Grills)

Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated sheet

0.5 mm. thick roofing/ Gutter fixed with gslvanised grom J or L hook bolts and

bolt 8mm dia with bituman and impet washer filled with white lead etc.

Excluding the cost of purlins rafter and trusses. (Tata / Jindal or equivalent)

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin of approved brand

& manufacture etc. comp. (M.R.) (B) 110 mm. Dia.

Providing & applying two coats of weather shield max paint (3 coats may be

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and

manufacturers. Surface Preparation : surface is thoroughly clean, dry and free

34 from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be 25990.00 82.00 S.M.

achieved by brushing with a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement and sand

mixture in the ratio 1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes. Priming: Apply a liberal coat of exterior acrylic

primer and allow it to dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is required between each coat of

Providing & Laying Dhrangadhra pale Yellow stone or Smililer without any spot

and tachaa fininshed stone Cldding size 600 x 1200 mm including aluminium

section of Hindalco, Jindal , Narmada,Banco or Equivalent approved make

35 having Powder Coated outer frame section having size 100 mm x 50mm x 13.00 8974.00 S.M.

3.00mm ( 1.80 kg./rmt. ) and use nessasary chemical in SM average 40 - 50 mm

thick including spacer & fitting, fixtures (S.S. bolt) with necessary bricks work as

per ornamented architechural design provied by as per architech.

Providing & Laying 10 to 12 mm Interlocking system Everest Sheet wall or

column cladding fixing on aluminium section of Hindalco, Jindal

36 Narmada,Banco or Equivalent approved make having Powder Coated outer 3424.00 4775.00 S.M.

frame section having size 50 x 25 x 3mm thick as per ornamented architechural

design provied by as per architech.

Providing and Fixing Of Pre Cast Region base Stone Mural With Carving Size

3000 x 1500 x 150 mm includes all materials, labour, equipments, tools, colour,

transportation, installation etc. Complete As Per Architect Suggesion &

Insutructuins & Drawings.

Providing and Fixing Of Wall Mural With Carving of Region base Art Size 2750 x

1200 x 230 mm includes all materials, labour, equipments, tools, colour,

transportation, installation etc. Complete As Per Architect Suggesion &

Insutructuins & Drawings.

Providing and Fixing Of Siporex Artifical stone Mural Art Size 2750 x 1200 x

mm includes all materials, labour, equipments, tools, colour, transportation,

installation etc. Complete As Per Architect Suggesion & Insutructuins &

Providing and Fixing Of Sculpture & Mural Weight 100 to 120 KG As Per

Architect Suggesion & Insutructuins & Drawings.

Providing and Fixing Of Water Curtain Foutain including (China mosaic tiles,

water proofing, pardi, reinforcement, plumbing work, mortor etc. relevant

accessories to be added in item description) of 1 HP. motor With Plumbing Work

As Per Architect Suggesion & Insutructuins & Drawings.

Fountain consist all required plumbing arrangements for 7.0 mts water Curtain

with 4 mts height, required control valves, 2 No of 1 HP Mono block Sub. Pump

of CRI/Crompton, Stainless steel stain mesh Filter on Suction Side of Pump

Nos., Main line of S.S. 304 2.5” DIA PIPE with required plumbing fittings,

fabrications etc. complete job, Manifold FOR PUMP 2 Nos., 7 Nos of 54 w of 3 ft

41B long Linear Water Proof lights Made from aluminum (LM6) HIGH PRESSURE DIE 3.00 680000.00 Nos.

CAST body with toughened glass , silicon gasket, with SS 304 clamp with Cree

make LED light fixture., RGB Controller & LED Driver 1 Set, Panel Board with all

necessary Switch gears of L&T, 2 Nos. of DOL Starter, phase indicator, MCBs, etc.

all fixed in outdoor double door M/S 16 gauge body duly powder coated with

grouting stand 1 No, ISI Cable for lights & Pump approx 15mts.

Providing & installation of DRN sandscape system shall consist of fixing of form

work levelling of concrete using an aluminium float, application of sandscape

top coat @ a dosage of 3.5 to 4 kg/sqmt. After 24-48 hrs application of muracoat

42 to give a desired sandscape effect. curing the same for 7 days. Groove cutting as

per drawing. Cleaning the same after 10 days & application of DERN seal coat

etc, Complete. Including Base of the sand scape flooring is 75mm thick M-25

grade concrete and Formwork etc complete.

(DRN sandscape systems) 1.00 1200.00 SQ.MT

Providing and laying Cement Concrete compacted thickness over the base

including necessary compaction, watering etc. complete. item includes levelling

by using vibratary plates compacted machine and as directed by Engineer-in-

charge. STAMPED CONCRETE

Providing & laying Cement Concrete Pavement using 1:1.5:3 (1 cement: 1.5 sand:

44 3 graded stone agg. 20 mm nominal size) & Vaccum Dewatering Technique 1.00 5981.00 CU.MT

including a floating surface with a skim powder floater, curing etc. complete.

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness with

filling of epoxy sealent as directed by engineer in charge

Providing and Fixing 60 mm thick Flagstone in size as per officer incharge. The

flagstone is fixing on 75mm thik sand bed in proper line, level with watering and

46 compaction etc. as per directed by engg. and Architect/Consultant Instruction & 1.00 1462.00 SQ.MT

Make : Bansal, Vyara Tiles, PM Pavers

Providing & Fixing 3 mm thick metal sheet with CNC cutting to fix it on vertical

surface.Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint in beams

& joists channels angles, tees, flats with connection plates or angle cleats as in

main & cross beams, hip & trussed purlins connected to common raffers & the

48 TENSILE STRUCTURES

Fabrication, installation and fixing of Tensile fabric over MS Members as per

following methodology, Design, structural analysis, detailed engineering & shop

drawings as per plan area.

MS Frame : Supply, fabrication and installation in position of MS Frame

including base plate, stiffeners, pipes, with anchors as per approved drawings.

Painting : Painting with P.U. Primer and two coats PU paint in approved shade on 380.00 6500.00 Sq.mt

the MS Frame making it completely ready to take the tensile fabric as specified

Fabric: Providing, patterning, cutting, heat welding to required shape and

Installation of the Tensile Fabric Ferrari -902 to the MS Frame with necessary

fixing accessories like GI wire, SS 304 profile laser cut plates, SS fittings, etc.

(RCC for footing and all concrete works shall be paid separately.)

Providing & Fixing of 100mm dia M.S. Bollard height 900mm at fixing with

49 nessasory hardwares incl. cleaning the surface of all dirt, dust & other foreign 66.00 2730.00 Nos.

matter etc. Comp.

Providing and laying ordinary C.C. 1:1.5:3 mix for R.C.C. work including boxing

centering,vibrating, curing and mixed with approved water proofing cement

compound or "CEMWET" or "PIDICRETE LW" intergral water proofing

addmixture as water proofing agent to be mixed with 50 kgs. cement bags shall

be as recommended by the manifacture of the water proofing material, concrete

work for top, bottom slab and side pardi for underground tank and item

inclusive necessary excavation and refilling the available earth, 15 cm th C.C.

1:4:8 for bedding conc., half B.M. in C.M. 1:4 outside wall, inside pardi as per

design, 10 mm th water proffing cement plaster in C.M. 1:3 with smooth

finishing, watering etc. comp. to all inner face of tank curing etc. comp. incl. PVC

steps, outlet , inlet, over flow and wash out pipe arrangment as necessary with

M.S.Cover of 25 Kgs. with locking arrangement fixing glazed tiles of approved

make such as Orient, Kajaria, Jhonson,Nitco,Somani ,Bell or equivalent make of

commercial quality of approved colour and size to sides and bottom of water

tankexcluding free board of 20 cm etc. as per structural drawing excl. steel and

as directed by Engr. in charge.,as per architect instructions.

Under Ground water Tank 9131.00 5.46 Lit

Providing erecting and fixing double coated Syntex/Super/Reno PVC (ISI) mark

51 water tank of required capacity each with all necessary fittings & connection etc. 3044.00 3.95 lit

complete on terrace.,as per architect instructions.

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria,Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring, treadsof

steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3sand)

finished with flush pointing in white cement etc.com. For all floors (Basic Rate:-

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria,Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of

steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary

cement paste for fixing and joined with white cement slurry etc.complete. For all

floors (Basic Rate:- Rs.285.0/S.M.)

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5

with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces,

R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm

size) ,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. Inside dimension,455 x 610 mm &450 mm deep for

single pipe , as per architect instructions.

Same As Above But Precast RCC Heavy Duty Cover Isstead of C.I. Cover 20.00 2681.76 No

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 20.00 242.39 No

Providing, Lowering & laying joining R.C.C NP2 CLASS pipe in C.M 1:1 of

55 following nominal internal diameters incl. Testing of pipes and joints etc. Comp

as per architect instructions.

Facility Informatory Sign :-Providing and fixing sign boards made out of 2mm

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 80 x 60 cms

rectangular as per design of IRC-67-2012. Pre treated with phospheting process

& acid etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint; reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable size iron angle of 35 x

56 x 3mm; painted with bestquality epoxy coatings in black and white bends. The 33.00 5906.48 Nos.

details of symbol foreach board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg.including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro reflective sheeting

from original manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered shall be submitted by

(A) Class-C Type-11 Retro Reflective sheeting

Painting lines, deashes, arrows, letters etc on roads, Air fields and like in two

57 coats with road marking paint, brushing including cleaning the surface of all dirt, 330.00 12.92 RMT.

dust and other foreign matter. (ii) Upto 10 cm in width

Inauguration Signage Board : Providing & fixing of Computer Graphic design: UV

printing on 3 mm ACP Composite penal Sheet, (Any Colour Brush Finished), Matt

Lamination all fitting ,Fixture, Hardware, Fastaning With Scaffoling etc.complete,

as per consultant drawings & instruction.

Providing & laying granite slab 18mm thick in flooring, treads of stepsand

landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement : 6coarse sand)

or lime mortar 1:1.5 laid and finished with flush pointing in whiteor colour

cement including rubbing and polishing complete. (Basic Rate:-Rs.1347.46/S.M.)

All Floor 153.00 2410.00 SM

Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo and

pillars laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) and

finished with flush pointing in white or colour cementincluding rubbing &

polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

All Floor 10.00 2449.00 SM

(C ) Labour Charges For Edge Finished & Sandwich Double Patti Work For

Granite (Photo Frame)

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria,Jhonson, Nitco,

Somani, Bell, Asian or Euro make in flooring,treads ofsteps & Landing laid on

bed of 20 mm (Average) base of cement mortar1:6 (1 Cement : 6 Coarse sand)

61 on new surface or fixing on existingflooring by adhesive material including 1.00 1397.83 SM

dismentaling of existing flooringand jointed with colour cement slurry including

finished with flush pointing& cleaning the surface etc. comp.Size 24" x 24" (Basic

Rate-Rs.485.0/S.M.)or Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers of

62 steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3coarse sand) and 1.00 1081.71 SM

jointed with white cement slurry. (BasicRate Rs.366.0/S.M.)

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime

63 putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed 1.00 989.45 SM

with pigment to match the shade of slab including rubbing and polishing etc.

complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

64 Cement : 3 coarse sand) and jointed with gray cement slury mixed with 1.00 1076.94 SM

pigment to match the shade of slab including rubbing and polishing etc.

Providing & Fixing of 450mm height G.I. tree guard With G.I. Cantex Jali fixing

65 with nessasory hardwares incl. cleaning the surface of all dirt, dust & other 198.00 732.00 RMT.

foreign matter etc. Comp.

CC Tree Grating :- Providing and fixing of Tree grating made out of cement

concrete M-20 & fixing of proper line level and including filling joints in C.M. 1:1

66 (1 part of cement : 1 part of stone dust ) smooth pointing including watering etc. 1.00 820.00 NO.

complete and as directed by engineer in charge. Tree Grating TG-3

950*950*75mm, ID 650mm (Approx wt./Set= 71 Kg)

Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete

walls similar surfaces for plastering & finished even & smooth with a floating

67 coat of cement slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and similar

surfaces -- Ground Floor

(A) For wall and similar surfaces

At Ground Floor 81.00 189.79 S.M.

(B) For ceilings & soffits

At Ground Floor 40.00 214.6 S.M.

Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete

walls similar surfaces for plastering & finished even & smooth with a floating

68 coat of cement slurry mixed with admixture of lime or neeru in required 1.00 237.51 S.M.

proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and similar

surfaces -- Ground Floor

Providing & Applying 20mm.th. Sand faced cement plaster on walls or similar

surfaces at all floor levels consisting of 12 mm. Av. Th. backing coat of C.M. 1:3(

cement :3 sand) & 8 mm.th. Finishing coat of C.M.1:1 (1 cement: 1 sand) -

GroundFloor,FirstFloor,Second Floor and Third(Terrace) Floor

Supply, Laying and washing of Hydrophobic type Factory premixed FreeFoam

Stonecrete wall texture, 8 to 10mm thick in approved base colour and with

selected and approved aggregates by EIC - Including specified UV resistant WB

Acry Seal application.

Providing 35 mm wide throating or plaster drip and moulding it to R. C. C. chajja

etc. comp.. For all floor

At Ground Floor 1.00 41.66 R.M.

Providing 20 mm Plaster Patta in plaster in line and level etc. Comp. For all

At Ground Floor 1.00 50.00 R.M.

Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For

all Floor (M.R.)

At Ground Floor 1.00 50.00 R.M.

Providing & construction brick work using Fly Ash bricks having crushing

74 strength not less than 35 Kg./sq.cm. in foundation & plinth in C.M. 1:6 (1 10.00 4,511.97 C.M.

cement:6 sand ) etc. comp. - Ground Floor

Providing & constructing Half brick masonary in Fly Ash bricks having crushing

75 strength not less than 35 Kg./sq.cm. in c.m 1:4 (1 cement: 4 sand) curing etc 1.00 678.86 S.M.

complete.- Ground Floor

Providing And Fixing 25MM THICK, 150MM WIDE INTERLOCKING WPC PLANKS

(WOOD PLASTIC COMPOSIT) FLOORING AS PER DETAIL, PATTERN AND AS

SELECTED BY THIS OFFICE. Inculding Of Necessary Hardwares, Scaffolding. As

Per Architectural Detailed Drawing And As Directed By Engineer In Charge..

Providing & Fixing Of Two Nos Dry aad Wet S.S Decorative type one DUSTBIN of

20 ltrs. With S.S.Support.

Dismantling of structures of roadways, including disposing

off unserviceable material free of cost which will be the

owenrship of contractor or as directed by the Engineer with all

leads and lift etc. Including labour, machinery & equipments

required to complete this item etc.

(A) Removal of Existing Concrete available beneath the existing pavement (RCC

(B) Removing existing Kotah Stone 15.00 47.72 S.M.

(C) Brick / Stone Masonary 5.00 550.40 CMT.

(D) Plain Concrete 8.00 609.26 CMT.

(E) Bituminious Pavement 8.00 288.65 CMT.

(F) Non Bituminious Pavement 8.00 155.25 CMT.

Total Amount of Area Development Work

Total Amount of Area Development Work

SITTING, RAILING AND MAIN ENTRANCE

Excavation for foundation includ.sorting out & stacking of useful materials &

1 disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp.

(A) Loose or Soft soil With Machinaries

(A) loose or soft soil

( I ) 0 To 1.5 mt. Depth 23.00 117.26 CM

Excavation for foundation includ.sorting out & stacking of useful materials &

2 disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp.

(A) Loose or Soft soil-With Manual Labour

(A) loose or soft soil

( I ) 0 To 1.5 mt. Depth 3.00 203.83 CM

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

20m.m Nominal size)&curing comp. incl. cost of form work in :

(A) Foundation and Plinth 12.00 3005.36 CM

Providing and fixing TMT bars Fe-500d steel reinforcement for R.C.C. work

4 including binding, bending and placing in position as per design & BBS of

structural consultant etc. comp. Up to G.L./P.L.

Upto G.L./P.L. 81.00 76.21 Kg.

Providing and constructing brick work using fly ash building bricks having

5 crushing strength not less than 35 kg/sqcm. in foundation and plinth in cement

mortar 1:6 (1 cement :6 fine sand) etc. comp.

upto G.L./P.L. 1.00 4237.00 CM

Providing and Fixing of Sitting Making of Cast in Situ controlled cement concrete

work M250 Expose with TMT Bar FE500d reinforcement with Groove and

curing complete incl. cost of form work in : & instructed by in EIC & Architect.

Size 1.20 x 0.60 x

Providing and Fixing of Sitting Making of Cast in Situ controlled cement concrete

work back side M250 Expose 150mm thick pardi with M250 Expose with TMT

Bar FE500d reinforcement with Groove and curing complete incl. cost of form

work in : & instructed by in EIC & Architect. Size 1.00 x 0.60 x

Providing and Fixing of Sitting Making of Metal and top 15mm thick Wooden

Figure fiber Plank complete & instructed by in EIC & Architect.

MS Box Section Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or angle

cleats as in main & cross beams,hip & trussed purlins connected to common

raffers & the like. As per attached drawing including necessary hardware and

labour etc.complete & instructed by in EIC & Architect.(Ralling & Gate Arc)

Providing & applying painting two coats at all floor levels on new steel other

10 metal surface with Epoxy paint, brushing interior to give an even shade incl.

cleaning the surface of all dirt, dust & other foreign matter etc. Comp.

(A) For All Type of Structure For all Floor 732.00 250.00 SM

Total amount of Sitting Area, Railling & Main Entrace Gate

Total amount of Sitting Area, Railling & Main Entrace Gate

IRRIGATION WORK

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/

Tulsi/Finolex make for water supply line at all floor levels incl. fixtures like

bends, tees, shoe etc joined with resin of approved brand & manufacture etc.

comp. Pipe shall be fixed on the wall the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing & Fixing P.V.C. Stop Valve Tulsi/Finolex make formake for water

supply line at all floor levels incl. fixtures and joints and fixing the same with

adhesive solvent, including

cost of all materials.

15 mm dia 41.00 Rmt 150.00

25 mm dia 25.00 Rmt 225.00

40 mm dia 30.00 Rmt 380.00

50 mm dia 36.00 Rmt 570.00

65 mm dia 15.00 Rmt 855.00

Providing & Fixing abonite ball cock of approved qualities directed etc.comp. (A)

non return Valve

Providing & Fixing gun metal check or non return full way wheel valve at

all floors levels, etc. complete. (A) 15 mm. dia.

25 mm dia 6.00 Nos. 420.63

40 mm dia 5.00 Nos. 663.43

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor levels,

polished bright etc. comp.Make- Cera F2013151 BIB COCK, Parry wareG3104A1, 14.00 Nos. 1323.00

HindWare F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK

6 Providing & fixing Dripper or Emmiter for irrigation as per directed by engg. and

Architect/Consultant Instruction & Suggestions

Rubber Hose pipe

Providing and supplying of 20 mm (3/4") dia Rubber Hose pipe 254.00 Rmt 55.00

Providing & Fixing of sprinkler specification Radius: 10' to 20',Flow rate: 3.8 to 31.5 GPM,Recommended

3.00 Nospressure

range:40 to11550.00

100 PSI,Operating pressur

Providing & erecting open well horizontal mono block pump set with cast iron

body, complete for three phase submersible motor having[E] For 7.5 HP

phase open well horizontal mono block pump set suitable for 1550 LPM to

LPM @ 13.5 Mtr to 42 Mtr head suitable for 65/75 mm dia delivery pipe[Cat.III]

Supplying & erecting approved make self-priming domestic monoblock water

pump with 1.5 H.P motor, suitable for operation on 230 volts, 50c/s. AC supply

with metallic flange, and M.S. impeller delivery and following discharge 44 LPM

at 32 Mtr head suitable 25 mm dia delivery[Cat.III]

Supplying and erecting Direct-on-line, Starter with 15A.rating contractor and

with 4-14A. range, directly operated thermal overload relay in sheet steel

enclosure for 3phase 415V.50 c/s. A.C. motor up to 7.5 H.P.complete erected on

P.W. Block with necessary connection. [Cat.III]

Supplying & erecting approved make Timer System Make Electro power

Automatic liquid level controller 6A. with Magnet sensor testing as per

instruction of Engineer in charge on site complete with wiring connection with

existing wires , with copper conductor from pump to upper and lower tank.

9.5 Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve -ISI marked suitable

3.00 for following

Nossize.12500.00

9.6 Providing and fixing of Pressure Release Valve 3.00 Nos 14500.00

Total Amount of Irrigation Work

Total Amount of Irrigation Work

Horticulture Work

LAWN : Area cleaning and side grading, removing unwanted materials, plants,

chrubs, wild grass, weeds, debris, rubbish, etc. Excavating up to depth 30 C.M

surface dressing leveling, making slopes for drainage according to landscape,

Disposal of unwanted materials with all labour and tools. Development of lawn

including preparation of bed ground, spreading and mixing the good soil with

1 Farm Yard Manure, Gypsum, fertilizer soil with farm Yard Manure, Gypsum, 254.00 90.00 S.M.

Fertilizer bas required hand specified. Planting of lawn grass bits roots of

approved quality, watering and specified. Planting of lawn grass bits roots of

approved quality, watering, and specified. Planting of lawn grass watering

mowing, weeding etc.

Catagory :- Selection - I type

Supplying on site plants with following specifications .

Plantation development works include weeding,cleaning, removal of unwanted

materials,preparation of pits,supporting bamboo sticks as per

specifications,planting & stacking, watering,with all labor tools and tackles etc.

Plants would be in good condition and of specified height. The rates would be

inclusive of all taxes, sales tax, Octroi,transportaion etc. complete F.O.R. site.

Conditions of plant would be verified at the time of selction as well delivery. All

complete and as per instructions of the Engineer-in-charge as Selection By

(Height from 3m to 4 m, Girth Size: 75mm to 100mm,Bag Size: 25'' * 25' - or 203.00 1000.00 Nos.

(Height from 1.2 m to 2.5m ,Bag Size: 15'' * 15''/ 12'' * 12'' - or more)

(Height from 3m to 4 m, Girth Size: 75mm to 100mm,Bag Size: 25'' * 25' - or 101.00 1500.00 Nos.

Any Ground covers (Height 0.45 m or more) 254.00 100.00 S.M.

Any Climbers 101.00 50.00 S.M.

Paspalum Lawn 152.00 120.00 Bag

Supplying,stacking and spreading of goodquality organic as well inorganic

manures and fertilizers and necessary soil conditioners ang amendments.

(a) Neem cake 989.00 7.00 Kg.

(b) Castor cake 43.00 6.00 Kg.

(d) Vermicompost 583.00 4.00 Kg.

(e) D.A.P.fertilizer 58.00 29.00 Kg.

(f) Cow Urine 13.00 500.00 Lit.

(f) Gypsum 117.00 5.00 Kg.

(h) Carbofuran 3G 23.00 120.00 Kg.

(i) Imidacloprid 17.6 SL (Antitermite treatment) 3.00 2300.00 Lit.

(j) Organic mix fertilizer 89.00 8.00 Kg.

(k) Cocopeat@ 5KG /Sqm, Providing & mixing of cocopeat in specified ratio

having Ph 6.5-7.5. Cocopeat supplied at site should have max moisture content 1522.00 28.00 Kg.

of 25% by weight, free from foul odour and any other foreign material.

(l)Termite control granules: Chloropyriphos 10% 41.00 125.00 kg

(m)Trichoderma culture 84.00 250.00 kg

(n)Silicon based spreading agent 3.00 1200.00 Lit

(o)Humic acid 15.00 200.00 kg

Providing of decorative pots with all labour etc. comp.As Per Architect

Suggesion & Insutructuins & Drawings.

Supplying & filling of good quality garden soil(free from inert material) suitable

5 for healthy growth of plants, in layers of 20 cm. Th'. Incl. watering, ramming & 365.00 350.00 Cu.mt

consolidation etc. complete.

Supplying and stacking of well rotten Farm yard manure (FYM) at site,including

6 royalty and carriage for all leads. (Manure measured in stacks will be reduced by 25.00 350.00 Cu.mt

8% for payment)

Development & Maintainance of Tree and Palms including loosening soil,regular

watering,weeding,regular trimming/training with all labour,removal of

unwanted materials, required fertilizer, tools and tackles etc. for a period of

Development & Maintainance of shrubs and Climber including loosening

soil,regular watering,weeding,regular trimming/training with all labour,removal

of unwanted materials, required fertilizer, tools and tackles etc. for a period of

Development & Maintainance of Ground Cover and Lawn including loosening

soil,regular watering,weeding,regular trimming/training with all labour,removal

of unwanted materials, required fertilizer, tools and tackles etc. for a period of

Total amount of Horticulture Work

Total amount of Horticulture Work

EXTERNAL ELECTRIFICATION WORK

A OUT DOOR LIGHT :

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

1 galvanised iron pipe with coupling and buch buried in specially prepared earth 283 No. 368.65

pit complete with necessary 8 SWG earth wire.

2 For using salt and charcoal / coke as required for pipe type earthing. 283 No. 171.70

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink extruded aluminium

with diffuser and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

(i) above 36 to 48 watts Cat-III 120 No. 3,345.12

3 (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

(i) above 40 to 48 watts Cat-lll 0 No. 5,194.43

(iv) above 90 to 120 watts 0 No. 7,266.95

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and

spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired upto terminal block.IP

(ii)32-40W Cat-lll 163 No. 4,819.72

Supplying and erecting 45W LED Decorative Posttop with Indirect Soft Vertical

Throw, Presure Diecast body, IP65 Grade, THD<10%, PF>0.95, 4000K, with pipe

arrangement for vertical mounting, open construction driver and accessories,

wired up to terminal block, fitting mounted on 89 mm. dia. 3.00 Mts. long GRP

Pole, with required accessories complete.

45 Watts. Post Top 0 No. 13,675.40

Supply of approved make frp/grp pole having followiing specifications :

FRP/GRP pole made by centrifugal moulding process using thermoset resin

polyester/epoxy resin system having minimum glass content 45.0%.The pole

should be in one pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as well as non conductive

and shock proof. Pole should be provided with FRP/GRP base bracket dully

fabricated from metal(M.S) and dully claded with FRP/GRP material to avoid

any metal exposer and painted with PU paint.

Pole should mechanical properties i.e 1. Specfic gravity (ASTM D 792) 1.3-1.8

Kg/m3, 2. Glass Content % by weight (ASTM D 2584) 45.0 -55.0%, 3. Water

absorption (ASTM D 570)

<0.5%, 4. Tensile Strength(ASTM D 638) 200+/-50Mpa, 5. Flexural strength

(ASTM D 790) 250+/-50Mpa, 6. Compressive Strength (ASTM D 695)

200+/-50MPa, 7. Yeild Strength(ASTM D638) 250 +/-50MPa.

Pole should be flame retardant as per IS 6746.Resin used shall be UV resistance

and pigmented. Pole should be painted with first coat of epoxy primer and then

two coat of highly weather resistance polyurethen paint to ensure proper

addhesion of the paint.Minimum thickness shall be 80 to 100 micron.Defelection

of the pole shall not exceed more than 10.0 % of the length of the pole for the

given load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility features of poles as per the

standard ANSI C123.20 latest version of ASTM D 923/01 including cable

termination box with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal junction box as per the

manufacturer details and site requirement .

(3) 'B' class (Heavy Duty) frp/grp pole suitable for base plate mounting

[A]Overall Length of 3.0 meter, Average thickness : 6mm, Top/Bottom Outside

Weight of Pole 12.0 Kg approx. (Without base) Metal Anchor Base dully frp 0 No. 9,023.34

claded (Size : 260 Ø * 12mmthk , Mounting hole PCD 210mm * 4 nos. of 16 Ø

[B] Overall Length of 4.0 meter, Average thickness : 6mm, Top/Bottom Outside

Dia. 76/143mm +/-2.Weight of Pole 15.4 Kg approx. (Without base) Metal

Anchor Base dully frp claded (Size : 290 Ø * 12mmthk , Mounting hole PCD

240mm * 4 nos. of 16 Ø hole)

[C] Overall Length of 5.0 meter, Average thickness : 7mm, Top/Bottom Outside

Dia. 76/160mm +/-2.Weight of Pole 21.0 Kg approx. (Without base) Metal

Anchor Base dully frp claded (Size : 310 Ø * 12mmthk , Mounting hole PCD

260mm * 4 nos. of 16 Ø hole)

Providing and erecting street light pole bracket comprising main B Class GI pipe

of 4.2 cm/require outside dia. complete with suitable B Class G.I sleeve tubing of

approx. 45cms. length and suitable for 76.5 mm / 80mm. / require size pole top

having sufficient fasteners for fixing the brackets and having spread of 1 mtr.

5 length with suitable rise as per site condition & suitable welded stiffener

reducer and nipple with check nut complete painted with one coat of Red oxide /

PU base primer and two coats of Aluminium / PU paint. paint with following nos

[A] Single Arm bracket 1 Mtr 120 No. 614.08

Providing & erecting approved make street light / wall mounting junction box

compression moulded from SMC (thermoset plastic) vertical sliding cover

having locking with square head stud loop in / loop out in built terminal suitable

6 for four core cable, waterproof of I.P. 54 protected with clamp or bolt nut &

earth bolt of following size.

8W LED surface Mounted Spike light to be mounted on the foundation, 3000K,

7 IP65 , CRI>80, CREE LED, ulham/Meanwell etc. complete. 315 No. 3,086.56

(Make : Crompton, Philips, Osaram, Havells or equivalent)

Path Finder Light 3000K with Initial input power

1 W, Input Voltage 12 V,Luminous flux tolerance +/-10%, 3000 K, IK10 [ 20 J

8 vandal-resistant],IP67 [ Dust penetration-protected, watertight] suitabe for 0 No. 2,852.24

grounting on the concrete walkway

(Make : Crompton, Philips, Osaram, Havells or equivalent)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(G) Step Light having Aluminium die cast and ABS Plastic material.

(i) 5 watts, Direct/Indirect luminaire, Cat-lll

(D) LED Strip Light

(ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non integral suitable 1400 R.Mt. 220.18

Driver complete

(E) Under Water Light,12V DC including Driver,IP-67 with die-cast/deep drawn

housing with impact resistance clear toughened glass. 44 No. 847.39

Under Water RGB Light, 12 W RGB Colour changing with inbuilt colour changing

mode, IP68 rated, Clamp mounted, Driver inbuilt.

(Make : Crompton, Philips, Osaram, Havells or equivalent)

6 W / R.Mt., 3,000 K. LED Strip Light with IP-66 with in built driver, etc.

complete. 0 R.Mt. 1,446.32

(Make : Crompton, Philips, Osaram, Havells or equivalent)

Supply, Erection, Testing & Commissioning of 10 watt LED Bulk Head luminary,

having min. 600 lumen out put, with housing made of high pressure die cast

aluminum & Poly carbonate front diffuser, IP66 protected & having impact

10 resistance of IK09. 0 No. 1,383.18

Make: Havells, Bajaj, Crompton, Philips,GE Contractor Has

to submit NABL approved Laboratory LM 79 and LM 80 Test certificate of model

to be offered for confirmation of above specification.

(c) LED Bollard fittings of minimum height 1000 mm & dia.100mm having

polycarbonate clear/milky diffuser mounted on 3mm thick aluminium finished

11 powder coated pipe with base plate 160x160mm with erection by M8x75mm 140 No. 4,461.17

fastner with required RCC foundation.IP65 for 9 to 20 watt and above ,surge-4kv

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(F) Spot Light 425 Lumens, Surge-2KV

(For Wall Mural) 32 No. 1,367.54

(ii) 8 to 11 Watts Cat-lll

(I) Adjustable spot light with COB led having aluminium reflector of following

(ii) 12 Watts No. 966.57

SETC of LED Wall/Pole mounted outdoor type up lighter/ Up-down Lighter/

Down Lighter as per requirement of Site and as per selection, any light fixture,

Model as per selection from Consultant & client

Lumen Package : 1000-1500 Lumen

Surge Protection : Minimum 2KV

Each fitting required : LM-79 & LM-80 Certificates NABL approved company’s or

third party’s laboratory) 0 No. 7,130.60

Voltage: 120 to 300 V,

Power Factor more than: 0.9,

CCT: 2500 to 6500K

LED driver efficiency: > 85 %

Protection Class: IP

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories

of same material at required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable

(A) 50 mm outer dia 1116 R.Mt. 62.62

(C) 90 mm outer dia 254 R.Mt. 95.95

Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed

by Engineer-in-charge.

(C) 80 mm dia. (Road Crossing) 51 R.Mt. 471.67

B Fuse Switch & Busbar:

Providing and erecting Sheet Steel powder coated MCB distribution board - flush

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

1 Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

(B) three phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following

(B) 40 Amp. Cat.III 0 No. 668.62

(C) 63 Amp. Cat.III 23 No. 727.20

Providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not incorporate any

electronic component for

following Max. rating erected as directed.

(ii) 40 Amps. FP Cat.III 0 No. 2637.11

(iii) 63 Amps. FP Cat. III 23 No. 3040.1

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

on 240 V A.C. system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark

Cat.III 330 Ea. 112.11

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system

5 and having breaking capacity 10 KA to be erected in existing box. confirming to

IS8828/1996 with ISI Mark

Cat.III 0 Ea. 270.68

Providing & erecting 240 V MCB double pole switch for motor & inductive load

6 (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box

having following capacity

(A) 6 to 32 Amp.

Cat.III 0 Ea. 299.97

C L.T. CABLE AND TERMINATION AND CABLE TRAY :

Making trench in soft soil of suitable width of 90 cm deep for laying cable or

locating the fault all over the run and back filling the same and making the

surface as normal

Covering of cable with second class bricks or cement tiles laid cover the cable

2 crosswise & also on both sides with covering of 7. 5 Cm. layer of sand above & 25 R.Mt. 134.33

below cable (16 bricks per meter)

Construction of man holes as per following specifications for providing passages

to lay the cables.

Providing 600 mm(B) x 600 mm(W) X 750 mm(D) manhole complete with 6"

thick brick wall, plastering on both sides and providing C.I. hinged cover

complete in all respect.

Providing and erecting iron clad cable route marker duly marked with

4 ELE.CABLE of size 23 cm.X 12 cm. Flushed with ground in cement foundation as 20 No. 240.38

directed by Engineer in charge.

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable

KV.grade to be erected as directed of following size

(B)4 core 4 Sq. mm 849 R.Mt. 73.73

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

6 Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.

(A) 3 core 2.5 Sq. mm 2550 R.Mt. 67.67

(B) 3 core 4 Sq. mm 1340 R.Mt. 85.85

(C) 3 core 6 Sq. mm 152 R.Mt. 105.04

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench /

pipe of following size of cables .

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 51 R.Mt. 217.15

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 51 R.Mt. 281.79

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 25 R.Mt. 372.69

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) 25 R.Mt. 484.80

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) 25 R.Mt. 534.29

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) 25 R.Mt. 726.19

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

trench / pipe of following size of cables

(a) 4 core 4 Sq. mm 254 R.Mt. 115.14

(b) 4 core 6 Sq. mm 406 R.Mt. 124.23

(c) 4 core 10 Sq. mm 406 R.Mt. 138.37

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

trench / pipe of following size of cables

(d) 4 core 16 Sq. mm 76 R.Mt. 151.50

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Submersible copper cable approved make of following Size.

(B) 3 Core x 2.5 Sq. mm. 61 R.M 104.03

(C) 3 Core x 4 Sq. mm 61 R.M 146.45

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground

across the road crossing or on floor with necessary material in an approved

manner and making

the ground as per original.

(E) 150 mm dia 51 R.Mt. 263.61

Cable Termination

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape

etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm 101 No. 38.38

(C) 2 to 4 core 10 Sq. mm 51 No. 38.38

(D) 2 to 4 core 16 Sq. mm 41 No. 47.47

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails,

insulating tape etc for following size of cables.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

13 following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

Providing and fixing approved make Perforated C type cable tray. Made from

sheet steel. The cable tray should be single or double bended as per required

and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer in charge..

Providing and fixing approved make 'T' Junction for Perforated C type cable tray.

Made from sheet steel. The Junction should be bended as per IS 2062/1079 and

shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5%

perforation with coupler plate / Fish plate and GI hardware like nut - bolt and

washers etc. erected on existing support as per Specification and as per

instruction of engineer in charge of following size

Providing and fixing approved make '90° Elbow' for Perforated C type cable tray.

Made from sheet steel. The Junction should be bended as per IS 2062/1079 and

16 shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate

/ Fish plate and GI hardware like nut - bolt and washers etc. erected on existing

support as per Specification and as per instruction of engineer in charge..

(1) 50 X 50 X 1.6 mm Thick 90° Elbow 8 No. 98.98

Providing , erecting , fabricating the M.S. structure as per requirement on site

incorporating proper size of M.S. angles,square,round, flats, bars, channels,

17 sections complete with cutting, welding, grinding & finishing duly painted with 76 Kg. 77.77

one coat of red oxide with erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering & finishing complete.

Add for specialised type of fabrication work on height by using scaffolding or

tower stair or rope as well as for lift machine room & siren works.

D. EARTHING SYSTEM :

Providing and erecting required size HOT deep Galvanised iron strip for

1 earthing of H.T. , 101 Kg. 77.77

OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.

2 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 13 Kg. 77.77

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250

3 Micron galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate including value of

earth resistane of installation.

[A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr 10 No. 5,842.85

Back filling compound - 1 Nos. of Bag of 15 Kgs.

[C] For Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation,

SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft

Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required. (e)

One wire 6.00 sq. mm

E. COMMON AREA WORK :

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp.

1 Plug socket, company fabricated powder coated sheet steel enclosure erected as

directed with connection.

[B] 15 Amp. / 5 Amp. Five pin Universal Socket Cat.III 13 No. 660.54

Supplying and installing and testing of 3-phase, 16 Amps, 5-pin socket and

Amp FP MCB, in compatible readymade IP-54 m. s. enclosure.

Providing and erecting metallic vitrified danger notice board as per language

3 suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected 10 No. 69.69

as per IS-2551.

Providing and erecting metallic vitrified danger notice board as per language

4 suggested by engineer incharge for HIGH VOLTAGE installation to be erected as 2 No. 81.81

Providing & erecting open well horizontal mono block pump set with cast iron

body, complete for three phase submersible motor having

[C] For 3 HP 3 phase open well horizontal mono block pump set suitable for

LPM to 270 LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia delivery 1 No. 15,707.52

5 [D] For 5 HP 3 phase open well horizontal mono block pump set suitable for

1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery 1 No. 18,746.61

[F] For 10 HP 3 phase open well horizontal mono block pump set suitable for

1725 LPM to 940 LPM @ 15 to 36 MTR head suitable for 65/80 mm dia delivery 1 No. 28,464.83

Supplying and erecting Direct - On - Line Starter with 18 A. rating contactor and

with 3.5 Amp. 18A range directly operated in totally insulated elegant enclosure

for single phase operation up to 3 HP as per IS 13947 complete erected on P.W.

Block with necessary connection.

Supplying and erecting Direct On-line Electronics Starter with 2-5/4-10/8-

14/10-16 Amp. Rating relay (variable current setting) directly operated in

totally insulated elegant enclosure and 18 Amp. Rating power relay with start -

stop button for single phase operation up to 3 HP as per complete erected on

7 P.W. Block with following features. 1 No. 1,603.88

Low voltage cut off below 140 V

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II]

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings

& Junction boxes fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

wire of green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm 10 R.Mt. 59.59

(b) 2 wire 2.5 sq. mm 10 R.Mt. 78.78

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on

10 wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm 5 R.Mt. 107.06

(g) 4 wire 4 sq. mm 5 R.Mt. 172.71

1 1 Phase CCMS Panel 1 No. 51,813.00

2 3 Phase CCMS Panel 2 No. 63,529.00

Total of Electrical Works :

TOTAL AMOUNT FOR WORK

TOTAL AMOUNT FOR WORK