Additional works required in connection with State Guest House on Plot no. IID41, Premises no. 04 4444, Newtown, Kolkata Supply of furniture in Reception, Conference Room, Restaurant, Banquet Hall, Service Room etc. and supply of kitchen equipment in

Amount

Supply ,Fitting & Fixing of Fortune NX Blue Din Chr Overall Size : Length : 55cm Width : 57.5cm Height : 77cm Seating Height : 46cmBack & Seat Material:Blue Fabric (300 GSM) •Seat-60 mm foam (24.5D) •Back-45mm foam (24.5D) Leg Material:Metal –Chrome Plated, The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Reson Side Table Oval L x W x H – 597 x 597 x 605 Table-top – 18 mm thick PLT Board in Noce Versailles Light [Brown] PLT – 18 mm thick in Noce Versailles Light & Black Ink. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Reson Centre Table Oval L x W x H – 1100 x 597 x 455 Table-top – 18 mm thick PLT Board in Noce Versailles Light [Brown] PLT – 18 mm thick in Noce Versailles Light & Black Ink. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Edward CornerTableWalnut Overall Size : Width : 60cm Depth : 60cm Height : 45cm Primary Material - Plywood Finish Color - Walnut Net Weight (kg) - 12 Warranty - 1 Year Maximum Load Capacity (kg) - 30 Style - Contemporary & Modern. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Table Reflection Reception Desk ( 1500W X 725D X 740H ) 5ft Work Surface - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cut out provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories - Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. Length - 1500mm Depth - 870mm Height - 1080mm

Supply ,Fitting & Fixing of Mingle Conference Table 20 Seater Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes. Understructure-It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction. Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). Wire Management-An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Kareena Mid Back Chair, SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should be made up 1.2 ±0.1cm. thick hot pressed plywood and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should be designed with contoured lumber support for comfortable seating posture. BACK SIZE: 48cm.(W) X64.5cm.(H) SEAT SIZE: 51.0cm.(W) X 48.0cm.(D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should be moulded with density = 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf for 25% compression. ARMRESTS :The armrest top should be made of moulded polyurethane (P.U) and mounted on to a drop lift height adjustable type M.S. tubular armrest support chrome plated. The armrest height should be adjustable up to 6.5±0.5cm. in 5 steps . KNEE TILT SYNCHRO mechanism WITH SEAT DEPTH ADJUSTMENT mechanism: The mechanism should be designed with the following features: • 360° revolving type single point control. • Front pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat back tilting ratio of 1:2. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Genesys 2-Door Wardrobe Colara Overall Size Depth - 881 mm Width - 545 mm Height - 1910 mm Material - Body panels are made of 15 mm thick Prelaminated Particle Board of EN312, E2 grade. The edges are edge banded with 1mm thick PVC edge banding. Doors are made of 15 mm thick Prelaminated Particle Board of EN312, E2 grade with all the edges are edge banded with 1mm thick PVC edge banding. Drawer components are made of 15 mm thick Prelaminated Particle Board of EN312, E2 grade. All the edges are edge banded with 1mm thick PVC edge banding. Body back and drawer bottom are made of 9mm thick Prelaminated particle board of EN312, E2 grade. Hardware - The high-quality hardware used like Roller Slides, Hinges , minifix, wood dowels. Lock used for main door is3 way lock and lock used for drawer is cam lock. Construction - Knock Down construction

Supply ,Fitting & Fixing of Arctic DinTbl 4Str Marble Dimensions - Width – 1060 mm, Height – 765 mm, MDF + MIP lamination + PU coating (UV cured) in high gloss finish, Solid Rubberwood + PU coating (UV cured) in matt finish. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Allure Royal Blue Din Chair Blue, Dimensions - , Chair Width – 450 mm, Chair Depth – 400 mm, Chair Height – 950 mm, Solid Rubberwood + PU coating (UV cured) in matt finish PU Foam cushioning, Fabric upholstery in royal blue shade. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Allure DinTbl 6Str Wood White, Dimensions - , Chair Width – 450 mm, Chair Depth – 400 mm, Chair Height – 950 mm, Solid Rubberwood + PU coating (UV cured) in matt finish, PU Foam cushioning, Fabric upholstery in royal blue shade. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Allure Royal Blue Din Chair Blue Dimensions - Chair Width – 450 mm, Chair Depth – 400 mm, Chair Height – 950 mm, Solid Rubberwood + PU coating (UV cured) in matt finish, PU Foam cushioning, Fabric upholstery in royal blue shade. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Crockery Cabinet 2100 x 500 x750

Supply , Fitting & Fixing of Artic Dining Table 4 Seater. The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. Dimensions - Width – 1060 mm Height – 765 mm MDF + MIP lamination + PU coating (UV cured) in high gloss finishSolid Rubberwood + PU coating (UV cured) in matt finish. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Allure Dining Chair. The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. Dimensions - Chair Width – 450 mm Chair Depth – 400 mm Chair Height – 950 mm Solid Rubberwood + PU coating (UV cured) in matt finish PU Foam cushioning Fabric upholstery in royal blue shade.

Supply , Fitting & Fixing of Relish Table With SS Top 1200 W size shall be 1180 Width mm x 750 Depth mm x 750 Height mm. The top shall be in Stainless Steel brushed finish with PLB insert for Durability . Easy to clean and maintain hygiene . The Understructure shall have side frames shall be made from 30 mm x 30 mm x 1.5 mm thick MS Powder Coated tubes at base which are welded and are fixed to top with screws . The bottom ends are closed with plastic bottles .MS Shade : S/G Metallic Dark Grey . The Cross Member shall be made from 30 mm x 30 mm x 1.5 mm thick MS powder coated tube , which is welded and bolted to side frames . The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Insight Table 1800W (1800 WX 900D X 740H) Size : 1665 X 900 X 740 from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturers Worktop 25 mm Thick PLB Tops with 2mm Thick PVC Edge Beading.C – Frames Legs 1.6 mm thick M.S Cframe Supporting the Top. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Seating Billet Chair Structure Upholstered single shell plywood Understructure Slant Cylindrical Tube Powder coated in Blank ink Matte Overall Dimensions 485x525x845. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Billet Chair Seating Structure Upholstered single shell plywood Understructure Slant Cylindrical Tube Powder coated in Blank ink Matte Overall Dimensions 485x525x845. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Banquet Chair Cover

Supply , Fitting & Fixing of Astral Dining Table Overall Size : Length : 120cm(120cm) Width : 120cm Height : 75cmSeating Capacity:6 Seater ,Top Material:Clear Tempered Glass (12mm thickness) ,Leg Material:Metal –Chrome Plated. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Insight Table 900 Supply , Fitting & Fixing of Insight Table Size : 900 X 900 X 740 from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturers Worktop 25 mm Thick PLB Tops with 2mm Thick PVC Edge Beading. C – Frames Legs 1.6 mm thick M.S Cframe Supporting the Top. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Heavy Duty Chair

Supply ,Fitting & Fixing of Wish Workstation (1500W x 6000D) with Pedestal+KBPT+CPU Trolly Wish WS TABLE TOP AND 1200HT PARTITION (variation uptom +_ 10%) Partition system shall be such that it is elevated from ground (upto 110 mm) for air circulation and ease of maintenance. The partition thickness shall be 52mm. The extrusions shall be made of aluminium having materials AL96063-T6 and have average wall thickness of 1.2 mm Coated with average 50 to 60 micron thickness of epoxy powder coating at every division of tile/block. Tiles shall have 4 divisions each having 270mm, with hollow tiles on top and bottom levels, and 2 blocks made out of a composite construction of MDF and 38mm thick paper honeycomb at the centre. Frame shall have a bottom frame assembly made up of L-channels- 2mm thick CRCA steel (IS: 513), formed plates of 3mm thick HR steel (IS: 2062) &ERW steel tube of size 35x15x1.6mm thick in oval cross section (IS: 7138) welded together and should be Coated with average 50 to 60 micron thickness of epoxy powder coating. This shall be connected to uprights and panel leg. Panel leg shall be fabricated by CO2 welded MS Tube. There shall be leg assemblies to support worktop which shall be fabricated by CO2 welded MS Tube. The blocks and metal frame shall be held together by verticals at both ends, made up of aluminium extrusion and avg wall thickness of 1.2mm. The trims shall be made up of aluminium extrusion and avg wall thickness of 1.2mm. The middle blocks shall have decorative laminates on both sides. The bottom tiles shall be in plain metal on both sides and shall be press fitted onto the assembly frame pf the panel with the help of snap on clips. The top tiles shall be slided into the panels from top before fixing with the top horizontal and may have finishes like whiteboard, fabric, fabric magnetic. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Thril Mesh Chair, Providing, supplying and placing of Mid Back Chair. SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area. The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size are *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism isdesigned with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 101.5 - 111.0 CM. SEAT HEIGHT (SH): 44.5 - 54.0 CM.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Wish Workstation (1200W x 6000D) with Pedestal+KBPT+CPU Trolly Wish WS TABLE TOP AND 1200HT PARTITION (variation uptom +_ 10%) Partition system shall be such that it is elevated from ground (upto 110 mm) for air circulation and ease of maintenance. The partition thickness shall be 52mm. The extrusions shall be made of aluminium having materials AL96063-T6 and have average wall thickness of 1.2 mm Coated with average 50 to 60 micron thickness of epoxy powder coating at every division of tile/block. Tiles shall have 4 divisions each having 270mm, with hollow tiles on top and bottom levels, and 2 blocks made out of a composite construction of MDF and 38mm thick paper honeycomb at the centre. Frame shall have a bottom frame assembly made up of L-channels- 2mm thick CRCA steel (IS: 513), formed plates of 3mm thick HR steel (IS: 2062) &ERW steel tube of size 35x15x1.6mm thick in oval cross section (IS: 7138) welded together and should be Coated with average 50 to 60 micron thickness of epoxy powder coating. This shall be connected to uprights and panel leg. Panel leg shall be fabricated by CO2 welded MS Tube. There shall be leg assemblies to support worktop which shall be fabricated by CO2 welded MS Tube. The blocks and metal frame shall be held together by verticals at both ends, made up of aluminium extrusion and avg wall thickness of 1.2mm. The trims shall be made up of aluminium extrusion and avg wall thickness of 1.2mm. The middle blocks shall have decorative laminates on both sides. The bottom tiles shall be in plain metal on both sides and shall be press fitted onto the assembly frame pf the panel with the help of snap on clips. The top tiles shall be slided into the panels from top before fixing with the top horizontal and may have finishes like whiteboard, fabric, fabric magnetic.

Supply ,Fitting & Fixing of Echo Storage 750W x 1219 H x 450D Wooden storage range comprises of a range of Low height to medium height wooden HDU Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting for height adjustment. HDU has a three point lock All the storages are fitted with a 6 mm leveler at bottom for leveling. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Genesys 2-Door Wardrobe Overall Size : Depth - 881 mm, Width - 545 mm, Height - 1910 mm Material - Body panels are made of 15 mm thick Prelaminated Particle Board of EN312, E2 grade. The edges are edge banded with 1mm thick PVC edge banding. Doors are made of 15 mm thick Prelaminated Particle Board of EN312, E2 grade with all the edges are edge banded with 1mm thick PVC edge banding. Drawer components are made of 15 mm thick Prelaminated Particle Board of EN312, E2 grade. All the edges are edge banded with 1mm thick PVC edge banding., Body back and drawer bottom are made of 9mm thick Prelaminated particle board of EN312, E2 grade., Hardware - The high-quality hardware used like Roller Slides, Hinges , minifix, wood dowels., Lock used for main door is3 way lock and lock used for drawer is cam lock. Construction - Knock Down construction. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Finesse Table - 5026, size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Finesse ERU -3616 LHS size shall be 1050 Width x 450 Depth x 705 Height. The top of Finesse ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Bravo High Back Chair,The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area BACK SIZE 47.5 cm. (W) x58.0 cm (H).SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. The one-piece armrests should be injection moulded from black Co-polymer Polypropylene The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. The bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors).The twin wheel castors should be injection moulded in Black Nylon. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Bravo Visitor Chair, The seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured & upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 47.5 cm(W) x 58.0 cm(H) and of seat shall be 47.0 cm (W) x 48.0 cm (D). The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as. per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. Overall Dimensions of Chair shall be Seat Height - 46.5cm, Height - 89.5cm, Width & Depth of Chair as measured from pedestal - Width-61.4 cm and Depth-64.5 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Ascend Product Size - The ASCEND consist of main and Add-On unit type of construction with metal body and metal/wooden door option. ASCEND is availble in following sizes : 2100W x 310D x 785H. **- Depth includes door thickness. Body depth is 308mm Stackability - Any width of add-on units can be stacked with any width of main unit and penta unit. Installation - The ASCEND should be installed on concrete or solid brick wall only Construction & Material - Aesthetically appealing complete knonk-down construction made from 0.5mm(#0.07 mm)THK CRCA as per IS-513 for back panel,side panel, side end cover panel, top panel, bottom panel & bottom panel cover. Doors - Wooden doors are made from 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade, Edge banded with matching 2mm thick PVC lipping. 300W. 450W & PENTA units have single RH door with lock. 600W, 900W units have LH door & RH door with single lock on RH door. Soft closing Hinges Available with 105° door opening angle Handleless Doors Locking - Cam lock with lock lever at the bottom of the door Shelving - Fixed shelves made up of 10 bend panel made of 0.6mm (for 300mm and 450mm Width land 0.8mm (for 600mm and 900mm width) Thick CRCA (D Grade, IS-513) A4 SIZE BOX FILES(85W×345Hx285D) can be stored ver ically as shown in page 4. Number of files that can be stored on each shelf is For width 900w - 9 Nos. For width 600w - 6 Nos. For width 300w - 3 Nos.Each shelf has max Load Capacity of 36.5kg of UDL for 900W unit 24.0kg of UDL for 600W unit 11.5kg of UDL for 300W unitFinish - Epoxy powder coated to the thickness of 50 microns(+10). The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Executive Table with ERU . The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA, Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. Size : Executive Table (2350Wx2350Dx750H) Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Gromet provided on work surface for wire management.Modesty Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Under-structure-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeonfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Hinge DoorStorage-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Handle is provided for ease of opening.Storage is provided with cam lock for security. Integrated Pedestal -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thickMDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to topPedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestal is provided with lock for security. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018,5. ISO 13485:2016 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

SS Work Table With 2 Bottom Shelve (1500 x 600x850)mm

SS Single Burner stock pot LPG Range (750x750x450)mm

SS Single Burner stock pot LPG Range (600x600x450)

SS 2 Burner Indian LPG Range with 1 Bottom Shelf (1125x600x750) mm

SS 2+1 Burner LPG Chinese Range With 1 Bottom Shelf (Drainage Collection Required) (1500x750x800 +300)

SS Body LPG Cum- Charcoal Tandoor (750x750x850)

SS Tandoor Preparation Table with marble Top and 2 Bottom Shelve (1200x600x850)

SS Work Table With a sink unit – Sink size: 18”x18”x10” (Water Connection Required) (1125x600x850 +100)

SS 3 Sink Dish Wash Unit- Sink Size: 18”x18”x10” (Water Connection Required) (1500x600x850)

SS Soil Dish Landing Table With a garbage chute and 1 over-head shelf (1125x600x850 +375)

SS Pot Rack -4 Shelves (1200x600x1650)

SS Dish Rack – 5 Shelves(1125x400x1650)

SS Water Cooler – 80 Ltrs. – Electrical (Water connection required )(600x500x1200)

Ss work top under counter refrigerator (1500x675x850 +100)

SS 4 Door Vertical Deep Freezer (48”x30”x84”)

6 Cylinder LPG Gas Bank Fitted with all accessories & fittings complete – To be installed outside kitchen area.

LPG Pipe Line Connection – From LPG Gas Bank TO respective LPG Equipments inside the kitchen - with accessories & fittings complete

WELL DECOR (BID ID -6288093)

Decor 9 (BID ID -6298467)