REPAIR AND PAINTING TO STEEL FURNITURE OF VARIOUS UNITS OTM MD ACCN UNDER GE NW KOCHI

Amount

Dismantling/removing the U/S or serviceable ply top from GI pipe charpoy and dismantle the frame completely, replace the broken/unserviceable parts with new ones, reassembling the charpoy frame completely in all respects by inserting/screwing in the existing/replaced long/short rails and legs inside the 3 way elbow 32 mm duly tightened with check nuts and re fixing the serviceable ply wood removed from the existing charpoy and keep the frame ready completely all as directed by Engineer-in-Charge. Notes :- (i) New parts required shall be measured and paid separately as supply only.(ii) Quoted rate is inclusive of labour element for providing new parts.

Supply only new long rail, 1880mm long, 32mm dia, medium grade GI, Class 'B' conforming to IS-1239 (pt1) of 1979 having threaded portions 22mm long, on each end.

Fabrication/making of short rail, 800mm long, threaded 22mm for both ends made out of long rail obtained from item No 2 above all as directed by the Engineer-in-Charge.

Fabrication/making of leg, 375mm long, duly threaded on top end up to 22mm made out of short/long rail obtained from item No.3. above including provn of FI clamps for fixing hard wooden block plugs at bottom as required all as directed by the Engineer-in-Charge.

Removal of one serviceable leg from GI pipe charpoy with ply top without disturbing the charpoy frame and removing the existing wooden block along with screw levelling/plaining by cutting/scraping the bottom of leg to make charpoy symmetrically horizontal and refix the removed wooden block after providing 34mm dia and 3mm thick mild steel sheet by spot welding at three places to form leg base and refix the leg to charpoy properly all as directed by the Engineer-in-Charge.

Supply & fixing 32mm dia 3 way elbow class B as per IS 1239 (Pt II) 1982

Supply & Re-fix the plywood 12 mm thick commercial as per the size of Charpoy GI/Charpoy with ply top as directed by Engineer-in charge

S&F in repair check nut 32 mm dia hexagonal shaped class B quality as per IS 1239 (Pt II) 1982 all as directed by the Engineer-in-Charge

S&F CP steel handle 125mm long made to shape and fixing the same to make the 3 way locking system fully operational including removing the unserviceable handle for almirah steel of any size and type.

S&F three way locking device to making the system fully operational for Almirah large steel.(Drg No.FD-109/114 (m)/351/67 (m)/1031/1033/TP) including removing the unserviceable locking system

S&F three way locking device to making the system fully operational for Almirah small/medium steel. (Drg No.FD-67(m)/114 (m) / 350 / 1032/1034 ) including removing the unserviceable locking system.

S&F new key hole with brass lock of 50mm six lever, duly fixed inside face of front shutter with stainless steel keys in duplicate for almirah steel of any size and type all as directed by the Engineer-in-Charge.(Drg No.FD-109/114 (m)/ 115(m) /350/351 /67(m)/1031/ 1032/1033/ 1034/TP)

S&F by welding or jointing to the bottom of steel almirah channel base/leg of length 440mm/484mm as per drg, each consisting of 1mm thick two MS sheet channel base 70mm wide 100mm high with the open end bent out wards up to 15mm, the ends of the channel shall be covered with 70 mm x 100mm MS sheet of 1mm thick including two coats of synthetic enamel paint olive green colour over a coat of zinc chrome primer for Almirah small/medium steel including removing the unserviceable channel base/leg all as directed by the Engineer-in-Charge.(Drg No.FD-67(m)/114 (m)/350/1032 1034 )

S&F by welding or jointing to the bottom of steel almirah channel base/leg of length 440mm/484mm as per drg, each consisting of 1mm thick two MS sheet channel base 70mm wide 100mm high with the open end bent out wards up to 15mm, the ends of the channel shall be covered with 70 mm x 100mm MS sheet of 1mm thick including two coats of synthetic enamel paint olive green colour over a coat of zinc chrome primer for Almirah large steel including removing the unserviceable channel base/leg all as directed by the Engineer-in-Charge.(Drg No.FD-109/114 (m)/ 115(m)/351 /67(m)/1031/ /1033/ TP )

S&F by welding or jointing to the bottom of steel almirah channel base/leg of length 440mm/484mm as per drg, each consisting of 1mm thick two MS sheet channel base 70mm wide 100mm high with the open end bent out wards up to 15mm, the ends of the channel shall be covered with 70 mm x 100mm MS sheet of 1mm thick including two coats of synthetic enamel paint olive green colour over a coat of zinc chrome primer for Locker steel including removing the unserviceable channel base/leg all as directed by the Engineer-in-Charge.(Drg No. FD 257 / 1029 )

S&F 1mm thick mild steel single shelf fixed to three sides (inside) the steel almirah as shown in drawing bent to 25mm on sides, back and in front and further bent upwards to 10mm in front and sides of shelves, duly painted with two coat of synthetic enamel paint olive green colour over a coat of zinc chrome primer for Almirah small/medium steel(Drg No.FD-67(m)/114 (m)/350/1032 1034)

S&F 1mm thick mild steel single shelf fixed to three sides (inside) the steel almirah as shown in drawing bent to 25mm on sides, back and in front and further bent upwards to 10mm in front and sides of shelves, duly painted with two coat of synthetic enamel paint olive green colour over a coat of zinc chrome primer for Almirah Large steel(Drg No.FD-109/114(m)/115(m)/351/67(m)/1031/1033/TP)

S&F 1mm thick mild steel single shelf fixed to three sides (inside) the steel almirah as shown in drawing bent to 25mm on sides, back and in front and further bent upwards to 10mm in front and sides of shelves, duly painted with two coat of synthetic enamel paint olive green colour over a coat of zinc chrome primer for Locker steel(Drg No.FD-257/1029)

S&F 20mm dia CP steel conduit pipe, with 1.6 mm wall thickness, with sockets at both ends 380mm long for Locker steel fixed in repairs all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-257/1029/1034)

S&F safety type, CP brass hasp and staple 75mmx40mm x3mm fixed on the shutter of locker steel in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-257/1029)

S&F 50mm long tower bolt, chromium plated steel, single lower or upper, duly welded to the shutter fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-257)

S&F single 125mm CP steel bow handle on the left or right shutter fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-257/1029)

S&F rear leg for chair CBB steel 19mm dia ERW conduit, 16G , 56 cm long made to shape, top of the leg welded to lower part of the back of the chair including two coats of synthetic enamel paint olive green colour over a coat of zinc chrome primer and provn of PVC shoe at bottom and PVC cap at top fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-75(m))

S&F 19/25mm dia ERW conduit 16G 1.29 Mtr long made to shape, side vertical back, front leg portion and horizontal seat portion, duly welded to rear leg of chair CBB steel including 2 coats of synthetic enamel paint olive green over a coat of red oxide primer with provn of PVC cap on top and PVC shoe at bottom fixed in repairs all as directed by the Engineer-in-Charge.[Drg No.FD-75(m)]

M&L for one seat or back frame made out of second class hard wood (chair or venteak or thampakam) 40mm wide & 25 mm thick, made to shape, duly given 2 coats of black synthetic enamel paint over a coat of wood primer, duly caned as per Godrej pattern with new white plastic, cane and fixed on the seat/back of chair CBB steel with 65 mm long machine screws with washers, 2 each on each side fixed in repair all as directed by the Engineer-in-Charge.(Drg No.FD-75(m))

M&L for new 19/25mm dia, 1.6mm thick MS conduit made to shape for chair CBA steel forming both the handle portions, vertical leg portions and the horizontal base portion complete, with the handle ends duly welded to the middle portions of the back rest and front legs, refixing the existing arm rests to the handles and providing 4 Nos hard rubber toes to the base including 2 coats of synthetic enamel paint olive green over a coat of zinc chrome primer to steel conduit frame fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-75(m))

M&L for providing 19/25mm dia, 1.6mm thick MS conduit to the lateral (one side) seat and back portion of chair CBA steel duly welded to the front legs and handle portion and applying 2 coats of synthetic enamel paint olive green over a coat of size chrome primer to the entire steel conduit frame of the chair and fixing the existing seat and back caned frame to the chair complete fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-75(m))

M&L for new teak wood handle, made to shape, 400mm long, 50mm wide and 25mm thick, front end duly curved suitable for chair CBA steel duly painted with 2 coats of black synthetic enamel paint over a coat of wood primer and fixing the handles to the arm rest portion of chair with screws from bottom complete fixed in repairs all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-75(m))

M&L for providing one seat or back frame made out of IInd class hard wood (venteak/ Thampakam/chair), 40mm wide and 25mm thick on all four sides, made to shape and painted with 2 coats of synthetic enamel paint black over a coat of wood primer, duly caned with 2mm wide plastic cane as per Godrej pattern, including fixing the seat/ back frame to the chair CBA steel with 65 mm machine screws with nuts and washers fixed in repairs all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-75(m))

M&L for 20mm dia, 16G MS conduit left or right side frame including the side front/rear leg portions and the top handle portion, 475mm high in the front 420mm for the rear and 405 mm long for the handle portion, duly welded to the seat frame of chair verandah and also to 10mm dia, MS rod in front. Each leg at the bottom to be provided with 3mm flat iron plates made to shape, duly welded and protected with hard rubber toes. Painting to the conduit frame to be dispensed with in repairs all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-19)

M&L for new left or right, single stringer, for ladder for loft with 25mm dia, 2560mm long, 1.60mm thick MS conduit, top end made to shape and top and bottom ends provided with hard rubber toes including painting the entire steel surface of the stringer with 2 coats of synthetic enamel black paint over a coat of zinc chrome primer, complete fixed in repairs all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-44)

S&F 04 Nos MS strip of size 60mmx30mmx4mm thick by welding to the existing frame below the seat of chair with out/with arm including provision one hole for fixing the seat by screwing and two coats of synthetic enamel paint olive green over a coat of red oxide primer as directed by Engineer-in-Charge. (Drg No.FD-75(M))

S&F new table top for table office clerk/general/typist steel of 18mm thick pre laminated teak veneered particle board, with 4mm thick teak wood beading all side duly polished, fixing the top to the table top frame with screws from bottom complete fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-84(m)/FD-1004)

All as per item No. 33 above but for table office officer steel top of size 1370mmx760mm x18mm thick. .(Drg No.FD-84(m)/FD-1003)

All as per item No 33 above but top of 900x900mm (18mm thick) for table 900x900x760mm steel. (Drg No.FD-1009)

S&F new lock, 4 lever aluminium body, locking bolt lever of cast brass with stainless steel keys in duplicate, suitable for table office clerk/general/typist fixed to the shutter or top drawer and providing automatic locking system to the other three drawers complete fixed in repairs all as directed by the Engineer-in-Charge.(Drg 84 (m)/1002 /1003/1004/1005/1008)

S&F table top with 18mm thick pre laminated teak veneered particle board of size 1900x680mm, with 6mm thick teak wood beading duly polished and fixing the top to the square tube frame with suitable screws from the bottom for table dining OR's fixed in repair all as directed by the Engineer-in-Charge.(Drg No.FD-165)

S&F bucket for receptacle (large) with 1mm thick GI sheet 210mm dia at bottom and 340 mm dia at top and internally 335mm high, bottom of bucket shall have 25mmx3mm flat iron welded to circular sheet of GI bucket, top of bucket shall have 50mm x 65mm and 3mm thick FI MS sheet welded to bucket for holding 10mm dia MS round bar handle of bucket as shown on drg and as directed by Engr-in-charge. (Drg No.FD-43(m)/FD-368/FD-1044)

S&F bin for receptacle small cylindrical, closed at bottom and of 290mm dia and 315mm high made of 1mm thick GI sheet, two brackets of 50mmx65mmx3mm thick FI mild steel sheet welded to bin for holding 10mm dia MS bar handle, 40mmx 3mm MS flat iron ring shall be provided at bottom of the bin, all as shown on drawing and as directed by the Engineer-in-Charge.(Drg No.FD-1045/FD-226(m))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint Olive green to all outside/exposed surfaces of the item (inside areas of almirahs/drawers etc totally closed are not to be painted. But open shelves exposed to view are to be painted) all as directed by the Engineer-in-Charge for Almirah large steel.(Drg No.FD-339/351/1031/MAP-18)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint Olive green to all outside/exposed surfaces of the item (inside areas of almirahs/drawers etc totally closed are not to be painted. But open shelves exposed to view are to be painted) all as directed by the Engineer-in-Charge for Almirah large steel glass door (Store well) 78" x 36" x 19"[Drg No.TP]

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint Olive green to all outside/exposed surfaces of the item (inside areas of almirahs/drawers etc totally closed are not to be painted. But open shelves exposed to view are to be painted) all as directed by the Engineer-in-Charge for Almirah map steel with 6 drawers.(Drg No.FD-83/1030)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint Olive green to all outside/exposed surfaces of the item (inside areas of almirahs/drawers etc totally closed are not to be painted. But open shelves exposed to view are to be painted) all as directed by the Engineer-in-Charge for Almirah medium steel .(Drg No.FD-243/FD-340/FD-350/FD-1032)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint Olive green to all outside/exposed surfaces of the item (inside areas of almirahs/drawers etc totally closed are not to be painted. But open shelves exposed to view are to be painted) all as directed by the Engineer-in-Charge for Book Case Godrej/open large glazed/book case steel/library pattern/book rack 7' high/book shelf open large.(Drg No.FD-90-356/1028)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Almirah large steel.(Drg No.FD-339/351/1031/MAP-18)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Almirah large steel glass door (Store well) 78" x 36" x 19".(Drg No.TP)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Almirah MAP steel with 6 drawers.(Drg No.FD-83/1030)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Almirah medium steel .(Drg No.FD-243/FD-340/FD-350/FD-1032)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Almirah medium steel 1/2 H x 1/2 Sh .(Drg No.FD-1034)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Almirah steel with 18 pigeon holes 915 x 305 x 1905 mm.(Drg No.TP)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Almirah glazed steel small.(Drg No.FD-104)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Almirah large steel with two vertical partition .(Drg No.F-134)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Book case Godrej 1675 X 890 X 305 mm.(Drg No.TP)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Book case Godrej/open large glazed/book case steel/library pattern/book rack 7' high/book shelf open large.(Drg No.FD-90-356/1028)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Book shelf small steel.(Drg No.FD-69(m))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Cabinet steel of size 1982mmx1018mmx543mm .(Drg No.SF-98/07)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Cabinet filling steel 4 drawer (Drg No.TP)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Chair steel with arm rest(Drg No.FD-120)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Chair CBA steel(Drg No.FD-75(m))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Chair CBB steel(Drg No.FD-75(m))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Chair CBA steel with arms and cushions (Drg No.FD-75(m))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Locker iron/4 unit/steel/for sailors/kit with built in locker steel (Drg No.FD-1029/127(M)/TP)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Locker bed side steel (Drg No.FD-1029)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Locker cupboard double 1770x760x600mm/metal cloth 1980x910x480mm/storewel unit with 18 lockers 1980x910x480mm/"B" 1980x1910x480(Drg No.FD-85005/TP/SPI)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Locker steel 6 units 455 x 430 x 455mm(Drg No.FD-127)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Locker steel 8 units 915 x 485 x 980mm (Store well)(Drg No.SF-97/01)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Locker for sailor (50 x 250 x 250 cm)(Drg No.TP)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Locker steel(Drg No.SK/4/5)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Metal cabinet for devices and tools 1500x600x2000mm/metal clother with lockers(Drg No.SK/98/07/TP)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel (2209.80 x 914.40 x 457.20 mm with 7 shelves(Drg No.TP)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack stationery steel(Drg No.31(m)/81)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack adj steel 6 shelves(Drg No.FD-106(M))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel pigeon hole : 18 holes 1905x915x480mm(Drg No.FD-106(M))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel 36 pigeon holes 13 shelves 3310mm x 1067 x 457mm(Drg No.FD-106(M))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack pigeon holes with locking arrangements 1500x1000x500mm(Drg No.FD-1037)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack skeleton type steel 6'3"x3'x1' 6"/8'x3'x1'.6" with 8 shelves(Drg No.FD-106)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack side steel/3 spacer steel/with separate compartmental Trays/with trey(Drg No.FD-1023/FD-97M)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack pigeon hole 1500mm x1000mm x 500mm(Drg No.FD-1037)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack skeleton type steel 6'-3"x3'x1'-6"/8'-3"x3'x1'-6" (8 shelves)/single side multi purpose 1500x500x1500/1830x760x1905 with 2 units combined with shelves.(Drg No.FD-106)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel 2000mm x 1200mm x 2000mm.(Drg No.FD-84)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel 3000mm x 1200mm x 2000mm .(Drg No.FD-84)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel 4500mm x 700mmx 2000mm/4500mm x 750mm x 2000mm .(Drg No.FD-84)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel 3075 x 890 x 490mm .(Drg No.FD-106(M))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel 1875 x 700 x 500mm .(Drg No.FD-1061(M))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel 6 tier steel .(Drg No.FD-1038)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel 1830 x 760 x 1905mm/5 shelves open.(Drg No.FD-129M/106)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel 7 tier 4000x500x2400mm/9 shelves 3075x899x 490mm/open large with 7 shelves of multiplex slotted angle system 905x446x2743/with 7 shelves 905 x 445x2743.(Drg No.FD-106/TP)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel shelving adj 1975 x 900x500mm/1875 x900x500mm .(Drg No.FD-69)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel 3 tier 5000 x 1000x 1500mm .(Drg No.FD-97M)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack steel skeleton type 10'x3'x1-6" with shelves including top and bottom (Drg No.FD-106)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Rack storage steel adj with shelves (Drg No.FD-129M)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Stool steel 1'x1-6"/305x915mm/305x325x510mm/2' high/305x305x760mm/675mm (Drg No.FD-81M/80M)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Table tubular steel/table office clerk steel/gen steel/table steel 900x600x760mm/typist steel/900x900x760mm (Drg No.FD-142/38/1004/1009/1008)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as colour approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Table office officer steel/table library steel/officer steel 1675 x 865x750mm.(Drg No.FD-84(M)/1003/1001/TP)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint white to be painted all sides for Chair verandah all as directed by the Engineer-in-Charge.(Drg No.FD-19/256)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint white to be painted all sides for Rack towel steel all as directed by the Engineer-in-Charge.(Drg No.FD-81/80(M))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint white to be painted all sides for Screen movable steel all as directed by the Engineer-in-Charge.(Drg No.FD-83(M))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat ,clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint white to be painted all sides for Tubular legs and stiffeners of teapoy verandah all as directed by the Engineer-in-Charge.(Drg No.FD-208/253)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint black to all outside/exposed surfaces of Form with out back(MS Square tubular frame/stiffeners and legs only )all as directed by the Engineer-in-Charge.(Drg No.FD-77(M))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint black to all outside/exposed surfaces of Form with back(MS Square tubular frame/back and legs) all as directed by the Engineer-in-Charge.(Drg No.FD-78)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint black to all outside/exposed surfaces of Ladder for loft all as directed by the Engineer-in-Charge.(Drg No.FD-44/238)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint black to all outside/exposed surfaces of Cast iron garden bench all as directed by the Engineer-in-Charge.(Drg No.TP)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint black to all outside/exposed surfaces of Desk(Conduit leg/frame ) all as directed by the Engineer-in-Charge.(Drg No.FD-107)

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint black to all outside/exposed surfaces of Form without back steel all as directed by the Engineer-in-Charge.(Drg No.FD-96(M))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint black to all outside/exposed surfaces of Table dining ORs(Square tube frames/stiffeners/legs only) all as directed by the Engineer-in-Charge.(Drg No.FD-165(M))

M&L for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint black to all outside/exposed surfaces of Trestle store room steel all as directed by the Engineer-in-Charge.(Drg No.FD-86(M)/1043)

All as per Item No.107 here-in-before but with black board paint for Black board with Easel(Drg No.FD-71/71(M))

ST ANTONY CONSTRUCTIONS

SHANMUGA TRADERS

M/s T.P SHAJI

PRIYADARSHINI CONSTRUCTIONS