Providing modular Kitchen to the new block and other balance works at old guest house ,Sulthan Batheri, Wayanad

Amount

KITCHEN WORK

od88665/2023_2024 : Custom fabricated stainless steel chute table Material using, 304 grade made in JINDAL steel Table with chute hole Structure: using 40x40mm square tube With 0-35mm adjustable bullet feet. size 100x60x85

od88707/2023_2024 : Custom fabricated stainless steel three bowl sink, Material using 304 grade made in JINDAL steel, Sink size-40x40x25., Structure: using 40x40mm square tube, With 0-35mm adjustable bullet feet.

od88763/2023_2024 : Custom fabricated stainless steel drain table, Material using, 304 grade made in JINDAL steel, Structure: using 40x40mm square tube, With 0-35mm adjustable bullet.

od88809/2023_2024 : Custom fabricated stainless steel plate rack Material using, 304 grade made in JINDAL steel With 4 tier Structure: using 40x40mm square tubes 0 to 35 mm adjusting nylon bullet feet.

od88866/2023_2024 : Custom fabricated stainless steel fish preparation table with sink Material using 304 grade made in JINDAL steel Sink size-40x40x25 Under cross support Structure: using 40x40mm square tubes 0 to 35 mm adjusting nylon bullet feet.

od91192/2023_2024 : Custom fabricated stainless steel meat preparation table with sink Material using 304 grade made in JINDAL steel Sink size-40x40x25 Under cross support Structure: using 40x40mm square tubes 0 to 35 mm adjusting nylon bullet feet.

od95436/2023_2024 : Custom fabricated stainless steel vegetable preparation table with sink Material using 304 grade made in JINDAL steel Sink size-40x40x25 Under cross support Structure: using 40x40mm square tubes 0 to 35 mm adjusting nylon bullet feet.

od95438/2023_2024 : Supplying and fixing Mixie

od95439/2023_2024 : Supplying and fixing Coconut Scrapper

od95440/2023_2024 : Supplying and fixing Grinder

od101695/2023_2024 : Custom fabricated Stainless steel pot stove Material using 304 grade made in JINDAL steel 1 big-burner Muller coper coils With bullet feet. Stainless steel pot stove 60x60x40

od95973/2023_2024 : Supplying and fixing Custom fabricated stainless steel hot plate supports table Material using, 304 grade made in JINDAL steel Structure: using 40x40mm square tube With 0-35mm adjustable bullet of size 120x60x85

od96105/2023_2024 : Supplying and fixing Custom fabricated stainless steel hot plate Top Material using 20mm MS plate Material using 1.2 mm thick A1S1, 304 grade made in JINDAL steel High pressure V burners With oil tray Bottom cross supportStructure: using 40x40mm square tubeWith 0-35mm adjustable bullet feet Stailness Steel Pot Stove 80x70x85

od96190/2023_2024 : Supplying and fixing Custom fabricated stainless steel sink Material using 304 grade made in JINDAL steel Sink size-40x40x25 Structure: using 40x40mm square tube With 0-35mm adjustable bullet feet

od96222/2023_2024 : Supplying and fixing Custom fabricated stainless steel two burner cooking range Material using 304 grade made in JINDAL steel 2 burner Indian rangeWaste collecting tray Heavy duty vassal carrying rest Structure: using 40x40mm square tube With 0-35mm adjustable bullet feet -stainless steel two burner cooking range 120x70x85

od96227/2023_2024 : Supplying and fixing Custom fabricated stainless steel 2 burner domestic rangeMaterial using 304 grade made in JINDAL steel 2 burner domestic range Heavy duty vassal carrying rest Structure: using 40x40mm square tube With 0-35mm adjustable bullet feet - stainless steel two burner cooking range 100x70x85

od96230/2023_2024 : Supplying and fixing Custom fabricated stainless steel pick up counter Material using 1.2 mm thick A1S1, 304 grade made in JINDAL steel Structure: using 40x40mm square tube With 0-35mm adjustable bullet feet stainless steel pick up counter 150x60x85

od96231/2023_2024 : Custom fabricated stainless steel kitchen hood of size 5 x1.20x 0.5 m - Material using 304grade made in JINDAL steel Detachable baffle filter With lights Detachable oil collection tray

od100103/2023_2024 : Supplying and fixing custom fabricated stainless steel storage rack of size 1.50x0.4x1.8 m - Material using 304 grade made in JINDAL steel with 4 tier structure using 40x40 mm square tubes 0to 35 mm adjusting nylon bullet feet bush

od96237/2023_2024 : Supplying and fixing Refrigerator ( Samsung , LG ,Whirlpool)

od96239/2023_2024 : Supplying and fixing Weigh scale

od96252/2023_2024 : Supplying and fixing custom fabricated stainless steel floor gratings of size 1.50x 0.30 m Material using 304 grade made in JINDAL steel

od96260/2023_2024 : Supplying and fixing custom fabricated stainless steel floor gratings Material using 304 grade made in JINDAL steel of size 120x30

od96300/2023_2024 : Supplying and fixing custom fabricated stainless steel floor gratings Material using 304 grade made in JINDAL steel of size 100x30

od96304/2023_2024 : Supplying and fixing Custom fabricated stainless steel floor grating Material using 304 grade made in JINDAL steel of size 30x30

od96310/2023_2024 : Supplying and fixing Exhaust Duct

od96341/2023_2024 : Supplying and fixing Fresh Air Duct

od96378/2023_2024 : Suppying and fixing 2HP Exhaust Fan

od96395/2023_2024 : Supplying and fixing 0.5HP fresh air fan

od96418/2023_2024 : Supplying and fixing angular frame for fan fixing and duct support material

od101802/2023_2024 : GAS LINE Supply , Installation ,Testing & Commissioning of LPG pipeline (MS pipe 15mm C class Jindal with Ball valve & other fittings)

od140700/2023_2024 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622<br>(thickness to be specified by the manufacturer), of approved make, in all colours,<br>shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,<br>in skirting, risers of steps and dados, over 12 mm thick bed of cement<br>mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @<br>3.3kg per sqm, including pointing in white cement mixed with pigment of matching<br>shade complete.

8.2.1.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

od87028/2023_2024 : Providing and fixing box type partition with Marine grade plywood both side natural teak wood veneered sheet on top and teak wood reepers on side etc complete as per architectural drawings and directions of engineer in charge.

od87190/2023_2024 : Supply, installation and commisioining charges for Stainless steel single bowl Kitchen sink with drain board and Sink cock, CI/MS brackets, C.P brass waste coupling, bottle trap, angle valve, flexible pipes, C.P bolts, screws, washers, etc. as applicable and complete including breaking and making good the wall and floor/slab as per Architectural drawings and relevant Standards. (CERA, PARRYWARE, KHOLAR, HINDWARE or equivalent)

od87192/2023_2024 : Supply, installation and commisioining charges for 25 Litters storage type water heater with accessories like angle valve, flexible pipes, C.P bolts, screws, washers, etc. as applicable and complete including breaking and making good the wall and floor/slab as per Architectural drawings and relevant Standards.

17.31 : Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

od87208/2023_2024 : Roofing with Prepainted Aluminium zinc steel sheet 0.4 mm thick machine moulded suitable shape with GI nuts and bolts and steel washers with necessary over laps of 150mm at ends including cost and conveyance of all materials labour charges etc complete

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

15.60 : Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

FURNITURE REPAIR WORK

od102291/2023_2024 : Supply and fixing new 6mm plywood repair and polishing materials and labour charge.

od102368/2023_2024 : Supplying and fixing 16mm marine grade ply wood and 8mm mica. Repair and polishing material cost and labour charge.

od102396/2023_2024 : Side table with rack - Repair and polishing labour charge and material cost.

od102513/2023_2024 : Old teak wood almirah - Supply and fixing old damaged frames and removing old lock and hinges. Handle material cost and labour charges.

od102623/2023_2024 : Old dressing cum writing table - Repairing and polishing material cost and labour charges

od106136/2023_2024 : 3 Seater sofa - Repair and polish. Removing old cussion and leather and polish material cost and labour charge.

od106143/2023_2024 : Simple setty - Removing old cussion and leather sheet material cost and labour charge.

od106146/2023_2024 : Supply and fixing top - Fixing glass on the tea poy and polishing work.

ELECTRICAL FITTINGS

od140860/2023_2024 : Supplying and Installation of 1 Ton AC including cost of all materilas labour charges etc complete

GTIS TELECOM AND CIVIL CONTRACTORS PVT LTD

Bidder Name

NALAKATH INFRASTRUCTURE LLP

GTIS TELECOM AND CIVIL CONTRACTORS PVT LTD