Annual plan 2021-22 Punarjani- Restoration of agricultural sector in post flood scenario -Construction of one Rain shelter and one High tech Poly house at DAF Arikkuzha in Idukki District

Amount

App: I -Construction of rain shelter and Protection wall

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

od482/2021_2022 : Supplying and fixing UV stabilized Polyethylene film 200 micron thick , 5 layer, IR blocking,Anti drip/fog diffused multi layer ,on the GI truss work with aluminium locking profile and zig zag spring galvanized with hex washer etc.complete but excluding the cost of Aluminium locking profile and zig zag

od486/2021_2022 : Supplying and providing shade net stabilized 35% including rolling and unrolling machine.

od488/2021_2022 : Supplying of Aluminium locking profile with Zigzag spring with steel screw including cost of material and conveyance etc.complete.

50.6.1.7 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

16.91.2 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

od494/2021_2022 : Supplying and laying weed control woven net over the floor

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

od498/2021_2022 : Supplying and installing ISI specified1.5 HP mono block pump set with a total discharge of 1.90 - 3.50 lps and total head of minimum 20 - 30m including all accessories and electrical fittings such as main switch, panel board, fuse unit etc. complete.

50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

50.18.7.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall

od508/2021_2022 : Supplying and fixing PVC ball valve of approved quality(pasted type) 40mm nominal bore

od509/2021_2022 : Supplying and laying Ventury assembly with necessary valves for fertilizer application.

od510/2021_2022 : Supplying and fitting disc filter 50mm with fittings etc. complete (12m3/hr)

od511/2021_2022 : Supplying and fitting air release valve 40mm (PVC) including all charges

od512/2021_2022 : Supplying and fixing pressure guage 2" dia 1 to 7kg/cm2 range

od514/2021_2022 : Supplying and fixing PVC Flush valve 40mm including all charges

od515/2021_2022 : Supplying and fixing poly grommet take off 16mm for taking connection from pvc sub main

od516/2021_2022 : Supplying and laying 16mm LLDP lateral pipe

od517/2021_2022 : Supplying and fitting a jet with 2 to 3 wetting dia and with average discharge of 20 to 30LHP at 1.5m c/c

od518/2021_2022 : Supplying poly end stop 16mm

od519/2021_2022 : Supplying and laying 6mm micro tube with all fittings

od520/2021_2022 : Supplying and fixing poly joiners 16mm including all charges

od521/2021_2022 : Supplying G.I. coated wire 2mm cross section

High tech Poly house

2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.33.1 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

od479/2021_2022 : Supplying and fitting G.I. welded mesh 25 x 25 mm 8 gauge including all charges

od480/2021_2022 : Supplying and fixing UV stabilized Polyethylene film 200 micron thick ,IR blocking,Anti drip/fog diffused multi layer ,on the GI truss work with aluminium locking profile and zig zag spring galvanized with hex washer etc.complete but excluding the cost of Aluminium locking profile and zig zag

od481/2021_2022 : Supplying of Aluminium locking profile with Zigzag spring with steel screw including cost of material and conveyance etc.complete.

od483/2021_2022 : Supplying and providing shade net 75% including all charges for top covering

od484/2021_2022 : Supplying and fitting MS pulley including all charges

od485/2021_2022 : Supplying and fixing HDPE woven skirting with all accessories essential

od487/2021_2022 : Supplying and fixing 40 mesh insect proof netting sufficient cover the sides and vents including all cost of material, labour charges etc. complete.

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

16.91.2 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

od489/2021_2022 : Supplying and laying weed control woven net over the floor

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

od490/2021_2022 : Supplying and installing ISI specified 1.5 HP mono block pump set with a discharge of 1.90 - 3.50 lps and total head of minimum 20 - 30 metre including all accessories and elecrical fittings such as main switch, panel board, fuse unit etc. complete

50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

50.18.7.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall

od491/2021_2022 : Supplying and fixing PVC ball valve 40mm

od492/2021_2022 : Supplying and fixing PVC flush valve 40mm

od493/2021_2022 : Supplying and fixing air release valve 40mm pvc

od495/2021_2022 : Supplying and fixing pressure guage

od496/2021_2022 : Supplying and laying Ventury assembly with necessary valves for fertilizer application.

od497/2021_2022 : Supplying and fitting disc filter with fittings etc. complete (20m3/hr)

od499/2021_2022 : Supplying and fitting screen filter with fittings etc. complete (20m3/hr)

od500/2021_2022 : Supplying and fixing poly grommet take off 16mm for taking connection from pvc sub main

od501/2021_2022 : Supplying and laying 16mm LLDP lateral pipe

od502/2021_2022 : Supplying and fitting micro jet sprinkler with 2 to 3 m wetting diameter and average discharge of 20-30 lph

od503/2021_2022 : Supplying and laying 6mm micro tube with all fittings

od504/2021_2022 : Supplying and fixing poly joiners 16mm including all charges

od505/2021_2022 : Supplying four way fogger emitters 5 to 7 LHP leak prrof snap fit joint fine droplets of average 90 microns, counter weight operating pressure 22 psi at 1.5 m c/c

od506/2021_2022 : Supplying poly end stop 16mm

od507/2021_2022 : Supplying G.I. coated wire 2mm cross section

13.48.3 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

od513/2021_2022 : Supplying and providing Padlock

50.6.1.7 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

P T PAULOSE

PRAMOD.T.P

Bidder Name

P T PAULOSE

PRAMOD.T.P

PEK CONTRACTING