Facelifting Renovation of Divisional and Sub Divisional offices construction of Bathroom at sd Kulgam thereof

Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Providing & laying in position cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg. 25 mm nominal / size) excluding the cost of centering & shuttering. all work up to plinth level (crushed)

Dry stone pitching hand packed on Horizontals excl. carriages of stones.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

15 mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level, Mild steel and medium tensile steel bars

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece.

Providing and fixing window frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel prime

Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete. 100x60x2.50 mm

Providing and fixing bright finished steel tower bolts with necessary screws etc. complete. : 250x10 mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (1000 ltr tank )

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm for washroom

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades as approved by Engineer- in-Charge, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing 50 ltr Electric water Heater/Geyser horizantal storage type including bolts for fixing and connection pipes of standard make

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device /automatic conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings.along with all accessories including sockets, bends FTT,FTE,FTA,MTA Etc. req. This includes testing of joints complete as per direction of Engineer-incharg, .Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixing PPR Unions

Providing and fixing mirror of superior glass and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing CP Brass wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia

Providing and fixing brass bib cock/Angle cock of approved quality. 15 mm nominal bore

Providing and fixing PVC pipes Single socketed pipe 110 mm dia of high quailty (Type B) including preparing of trenches solvent rubber warshers

Providing and PVC coupler for PVC drainage pipes 100 mm

Providing and fixing single equal Tee (with door) 110x110x110 mm

Providing and fixing PVC plain trap/door bend 87.5° 110 mm bend

Electrical wiring by way of providing and fixing of switches lamps wires with required PVC electrical conduits and modular plates/switches etc (3 no.)of standard make (4 mmsq =30m , 1.5 mmsq = 1 coils , 6 A/10 A switch/indicator = 4 No.,32 A switch with socket = 02 No. , 15 w LED lamps with holders = 5 No. , exhaust fan =01 No, MCB 6 A =2 No., 25 A = 2 No. and 40A DP = 1 No of standard make complete job