DC-PDD Tenders

Cement Bottoming of 16/13/11/9 Mtr Long Poles(U/G,A/G) in 1:2:4 mix including supply of material, excavation and form work, (Complete Job)

Providing and fixing of Wooden planking, tongued and grooved in flooring(Make Acsion tesa, green ply or equalant brand) 8mm thick non-combustible fire performance as per BS-476(Part-6 &7) with frame of GI channel of size 3m x 0.10m scaffolding if necessary all iron work etc. complete of standard BIS certified make including fixing with iron screws & providing and fixing of Ply, Beeding, adhesives etc complete ; design and installation as per directions of engineer in-charge.(Tech Section , Dispatch Room and S.O Room)

Supply, Installation, testing & Commissioning of 45 W street light fixture made of Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness, excellent corrosion resistant.High efficiency polycarbonate UV stabilized cover with integrated Lens to ensure Asymmetrical batwing light distribution. fixture to have with built in autonomous sensor with Capabilities of switching ON and OFF with DAWN to DUSK operation. IR sensor to mitigate the effect of surrounding artificial light .High efficiency long life LED module with SMD Lumen efficacy of LED >120 lm/W.NABL lab in-house. Powered by Integral potted electronic driver with APFC, lower THD, Output Short/Open Circuit Protection, Surge Protection upto 10kV , phase to phase (440V) / Over Voltage Protection. CCT 5700, CRI>70, THD<10%, PF>.95, IP66, IK07.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +50 DEG.C; Input Supply Voltage Range:140V-270V, DRIVER SAFETY REQUIREMENT STANDARDS :IS 15885-2-13, DRIVER PERFORMANCE REQUIREMENTS: IS 16104, PHOTO BIOLOGICAL SAFETY NORMS: as Per relevant IS, CERTIFICATION: LM 79 FOR LUMINAIRE LM 80 FOR LED SOURCE [Replacement Warranty and Maintenance for 2 Years]

Supply, Carriage upto site (including Loading/Unloading),Testing and Erection of Steel Tubular Pole, 11 Mtr. Long Pole(ST-410 SP-56) with planting depth of 1/6 th of the height of the pole, (11 mtr. Long ) as per approved drawings/standards

SITC for creation of 25 KVA Sub-station along with HT/LT network at Chhiral under the jurisdiction of Sub-Division Dharmari.

SITC for creation of 25 KVA Sub-station along with HT/LT network at Barni Gali, Sarh under the jurisdiction of Sub-Division Dharmari.