Repairing and Maintenance works in narendra modi G+14th floor u.g/p.g hostel and G+ 9th floor girls hostel building at narendra modi medical college campus .

Name of Work:- Repairing and Maintenance works in narendra modi G+14th floor u.g/p.g hostel and

G+ 9th floor girls hostel building at narendra modi medical college campus

AHMEDABAD MUNICIPAL CORPORATION

AMC MET/HOSPITAL

Name Of Work :- Repairing and Maintenance works in narendra modi G+14th floor u.g/p.g hostel and G+ 9th floor

girls hostel building at narendra modi medical college campus .

S.R.N Items Rate Amount

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

1 60.00 materials and disposing off the excavated stuff cu.m 115.92

upto 50 Meter lead.(A) Loose or soft soil.( iteam

code 04001A ,S.O.R Ahemdabad City 2023-24)

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

2 40.00 disposing off the excavated stuff upto 50 Meter cu.m 148.19

lead.(B) Dense or Hard soil.( iteam code 04001B ,S.O.R

Ahemdabad City 2023-24)

Excavation for foundation for depth from 1.5 m to

m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

3 25.00 50 Meter lead.(A) Loose or soft soil.( iteam code cu.m 128.52

04002A ,S.O.R Ahemdabad City 2023-24)

Excavation for foundation for depth from 1.5 m to

m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

4 25.00 50 Meter lead.(B) Dense or Hard soil.( iteam code cu.m 160.77

04002B ,S.O.R Ahemdabad City 2023-24)

Excavation for foundation for depth from 3.0 m to

5.0 m including sorting out and stacking of useful

materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft soil.(

iteam code04003A,S.O.R Ahemdabad City 2023-24)

Excavation for foundation for depth from 3.0 m to

m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

6 20.00 50 Meter lead.(B) Dense or Hard soil.( iteam cu.m 172.50

code04003B,S.O.R Ahemdabad City 2023-24)

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

not exceeding 20 cm. in depth consolidating each

7 60.00 disposited layer by ramming and watering.( iteam cu.m 129.10

code 4006,4.12,S.O.R Ahemdabad City 2023-24)

Filling in plinth with sand under floors including

watering ramming, consolidating and dressing

8 55.00 complete.(iteam code 4007A,4.24,S.O.R Ahemdabad cu.m 455.63

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc.

complete.(iteam code 04008A,S.O.R Ahemdabad City

Filling in foundation and plinth with brick Bats Chhara

in layers of 20cm. thickness including watering,

10 30.00 remming and consolidating etc. complete. (iteam code cu.m 594.61

04009A,S.O.R Ahemdabad City 2023-24)

Boring holes 3.5 m deep in ordinary soil (for cast in

situ piles) and getting out the soil and disposal of the

surplus excavated soil as directed within a lead of

11 1.00 Meter for following diameter of pipes.(i)200 Each 1078.13

mm.(iteam code 04010A, 4.27,S.O.R Ahemdabad City

Boring holes 3.5 m deep in ordinary soil (for cast in

situ piles) and getting out the soil and disposal of the

surplus excavated soil as directed within a lead of

12 1.00 Meter for following diameter of pipes.(ii) 250 Each 1290.97

mm.(iteam code 04010B , 4.27,S.O.R Ahemdabad City

Boring holes 3.5 m deep in ordinary soil (for cast in

situ piles) and getting out the soil and disposal of the

surplus excavated soil as directed within a lead of

13 1.00 Meter for following diameter of pipes.(iii) 300 mm Each 1509.00

(iteam code 04010C , 4.27,S.O.R Ahemdabad City

Extra for under reaming inside the bore Holes for

under reamed piles of following Diameter.(i)

14 1.00 mm(iteam code 04011BA, 4.28,S.O.R Ahemdabad City Each 430.32

Extra for under reaming inside the bore Holes for

under reamed piles of following Diameter.(ii)

15 1.00 mm(iteam code 04011B , 4.28,S.O.R Ahemdabad City Each 516.39

Extra for under reaming inside the bore Holes for

under reamed piles of following Diameter.(iii) 300 mm

16 1.00 (iteam code 04011C, 4.28,S.O.R Ahemdabad City 2023- Each 642.30

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil. (EXECUTED WITH MANUAL

17 5.00 LABOUR)(iteam code 04B001A ,S.O.R Ahemdabad City cu.m 201.81

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil. (EXECUTED WITH MANUAL

18 5.00 LABOUR)(iteam code 04B001B,S.O.R Ahemdabad City cu.m 259.14

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing complete

19 4.00 excluding cost of formwork in (A) Foundation and cu.m 2976.00

Plinth (iteam code 05003A,5.3.2 ,S.O.R Ahemdabad

Providing and laying cement concrete 1:4:8 (1-

Cement : 4- coarse sand : 8- hand broken stone and

curing complete excluding cost of formwork in (A)

20 6.00 Foundation and Plinth (iteam code 05004A,5.3.3 cu.m 2653.67

,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- Coarse sand : 6- crushed stone aggregates

21 5.00 20 mm nominal size) and curing complete including cu.m 4006.15

cost of formwork in (A) Wall Caps / Coping (iteam

code 05005A,5.3.14 ,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete 1:5:10 (1-

Cement : 5- Coarse sand : 10- hand broken stone

aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in

22 5.00 (A)Foundation and Plinth (iteam code 05006A,5.3.4 cu.m 2492.51

,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

23 5.00 complete excluding cost of formwork in (A) cu.m 3661.30

Foundation and Plinth (iteam code 05010A,5.3.13

,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in

(B)Independent piers, columns, and pillars, upto

24 5.00 floor two level (iteam code 05010BA,5.3.13 ,S.O.R cu.m 3661.30

Ahemdabad City 2023-24)

Providing and laying cement concrete work 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) and curing complete excluding

cost of formwork and reinforcement for reinforced

25 5.00 concrete work in (A) Foundations, footings, Base or cu.m 3923.53

columns and Mass concrete (iteam code

05011AA,5.4.1 ,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete work 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) and curing complete excluding

cost of formwork and reinforcement for reinforced

concrete work in (B) Slabs, landing, shelves, Balconis

Lintels, Beams, Girders and Cantilever upto floor two

level. (iteam code 05011BA,5.4.1 ,S.O.R Ahemdabad

Providing and laying cement concrete work 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) and curing complete excluding

cost of formwork and reinforcement for reinforced

concrete work in (D) Columns, Pillars posts and struts

27 5.00 upto floor two level. (iteam code 05011DA,5.4.1 cu.m 4012.47

,S.O.R Ahemdabad City 2023-24)

Providing TMT Bar FE 415 reinforcement for R.C.C.

work including bending, binding and placing in

position complete upto floor two level (iteam code

05014BA,5.4.11 ,S.O.R Ahemdabad City 2023-24)

Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in

29 200.00 position complete upto floor two level (iteam code kg 75.46

05014C,5.4.11 ,S.O.R Ahemdabad City 2023-24)

Providing and laying controlled cement concrete

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

30 6.00 concrete work in (A) Foundations, footings, Base of cu.m 3977.88

columns and Mass concrete (iteam code

05024AA,5.8.2 ,S.O.R Ahemdabad City 2023-24)

Providing and laying controlled cement concrete

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (B) Walls, from top of foundation

level upto floor two level (iteam code 05024BA,5.8.2

,S.O.R Ahemdabad City 2023-24)

Providing and laying controlled cement concrete

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (C) Slabs ,landing,

shelves,Balconies Lintels, Beams, Girders and

Cantilever upto floor two level. (iteam code

32 5.00 05024CA,5.8.2 ,S.O.R Ahemdabad City 2023-24) cu.m 4460.36

Providing and laying controlled cement concrete

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (D) Columns, Pillars posts and

struts upto floor two level. (iteam code 05024DA,5.8.2

,S.O.R Ahemdabad City 2023-24)

Providing and laying controlled cement concrete

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (E) Staircases excluding landing

34 5.00 upto floor two level (iteam code 05024EA,5.8.2 ,S.O.R cu.m 5418.91

Ahemdabad City 2023-24)

Providing and laying controlled cement concrete

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (K) Vertical and Horizontial its

upto floor two level. (iteam code 05024KA,5.8.2 ,S.O.R

35 5.00 Ahemdabad City 2023-24) cu.m 4701.97

Brick work using common burnt clay building bricks

having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

36 60.00 (iteam code 06001AA,6.12 ,S.O.R Ahemdabad City cu.m 4345.02

Extra for brick work in super structure above plinth

level upto floor two level (A) Modular (iteam code

06006A,6.19,S.O.R Ahemdabad City 2023-24)

Extra for brick work in super structure above floor

two level Item No. 1(6.12) (A) Modular (iteam code

06007A1A,6.2,S.O.R Ahemdabad City 2023-24)

(i) Half brick masonry in common brunt clay building

bricks having crushing strengthnot less than

Kg/Sq.Cm. in Cement mortar 1:4 (1 Cement:4-

coarsesand) in foundationandplinth

39 230.00 (A) Modular (iteam code 06008A1A,6.3,S.O.R Sq.m 584.68

Ahemdabad City 2023-24)

Extra for half brick masonry in super structure above

plinth level upto floor two level. (A) Modular(iteam

40 90.00 code 06010A,6.32,S.O.R Ahemdabad City 2023-24) Sq.m 47.85

Half brick thick honey- comb brick work with

common burnt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. (ii) In Cement

Mortar 1:5 ( 1- Cement : 5 - coarse sand)(iteam code

41 30.00 0612BA,6.55,S.O.R Ahemdabad City 2023-24) Sqm 298.38

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. Height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (A) Foundations Footings Bases of

Columns etc. and Mass concrete.(iteam code

09001AA,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. Height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (B) Flat surfaces such as soffits of

supspened floors slabs Landings and the like. (1)

Floors etc. upto 200 mm in thickness.(iteam

code09001B1A,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. Height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (B) Flat surfaces such as soffits of

suspended floor roof slabs Landings and the like. (2)

Floors etc. above 200mm in thickness.(iteam code

09001B2A,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (C) Vertical surface such as walls

(any thickness) partitions and the like including

attached buttresses & string course & the like.(iteam

code 09001CA,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (G) Columns PillarsPosts and

struts. (1) Square Rectangular Polygonal in plan.(iteam

code 09001G1A,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

47 10.00 concrete work in. (G) Columns PillarsPosts and Sqm 422.10

struts. (2)Circular or curved in Plan.(iteam code

09001G2A,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (H) (1) Sides and soffits of Beams

Beam Haunchings cantilevers Girders Bressumers

and Lintels not exceeding 1 M. in Depth.(iteam code

09001H1A,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

49 10.00 concrete work in. (H) (2) Sides and soffits of Beams Sqm 259.88

Beam Haunchings canti-levers Girders Bressumers

and Lintels exceeding 1M.in Depth.(iteam code

09001H2A,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (I) Edges of slabs and Breaks in

floors and walls.(iteam code 09001IA,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

51 10.00 concrete work in. (K) Small surfaceassuch as Sqm 604.80

cantiever brackets and ends of steps caps and

basses to pilasters and Columns and the like.(iteam

code 09001KA,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

52 10.00 concrete work in. (L) Chullah Hoods, weather Sqm 155.78

shades Chhajjas Corbels etc. including edges.(iteam

code 09001LA,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (M) Staircase with sloping or

stepped soffits including risers and stringers

excluding landing.(iteam code 09001MA,9.1,S.O.R

53 12.00 Ahemdabad City 2023-24) Sqm 242.55

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (Q) Vertical fins and vertical sun

breakers.(iteam code 09001QA,9.1,S.O.R Ahemdabad

Extra for additional height of propping and

centering where the height of propping and

centering exceeds 4 .O M between supporting floor to

ceiling including temporary brick or stone pillars for

supporting as required. (i)Height more than

M.and upto 5.0 M.(iteam code 09002AA,9.1,S.O.R

55 15.00 Ahemdabad City 2023-24) Sqm 386.48

Providing and fixing 35 mm thick shutters for

Doors, windows and clear story windows including

anodised alluminium butt hinges with necessary

screws. (A) Indian Teak Wood (ii) Fully Glazed.(iteam

code 10004BA,10.12,S.O.R Ahemdabad City 2023-24)

Providing and fixing in position collapsible steel

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size with top

and bottom rails of T_rin 40x 40 x 6 mm with

57 3.00 38mm dia, steel pulleys complete with bolts, nuts, Smt. 5391.23

locking arrangements, stoppers handles including

applying a priming coat of red lead paint.(iteam code

11003A,11.6,S.O.R Ahemdabad City 2023-24)

Providing and laying 40mm thick marble chips

flooring rubbed and polished (I.E. terrazo) to

granolithic finish with under layer 30mm thick

cement concrete 1:2:4 (1-Cement:2-coarse sand :4-

graded stone aggregate 10 mm and down gauge)

and top layer 10mm thick with white, black or white

and blak marble cihps of required sizes from 1mm

58 5.00 to 4mm nominal size laid in cement marble powder Sqm 749.70

mix 3:1 (3-Cement : 1-Marble powder by weight) in

proportion of 4:7 (4-Cement :7-marble chips by

volume) (A) Dark shade pigment with ordinary

cement (In top layer only)(iteam code

14001AA,14.2,S.O.R Ahemdabad City 2023-24)

Providing and laying Vitrified tiles 8 to 10 mm thick

, 36'' x 36'' in flooring treads of steps and

landing laid on a bed of 12mm thick cement mortar

59 30.00 1:3 (1- cement : 3-coarse sand ) finishing with Sqm 1469.91

flush pointing in white cement.(iteam code

14008DA,14.29,S.O.R Ahemdabad City 2023-24)

P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

60 250.00 color cement slurry including finised with flush Sqm 1178.10

pointing & cleaning the surface etc. complete for

light shade(iteam code 14022A,S.O.R Ahemdabad City

Providing and laying white glazed tiles 6mm thick in

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-

61 70.00 coarse sand ) finishing with flush pointing in white Sqm 908.17

cement.(iteam code 14008AA,14.29,S.O.R Ahemdabad

Providing and laying white glazed tiles 6mm thick in

skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

62 70.00 jointed with white cement slurry(iteam code Sqm 1044.23

14009AA,14.32,S.O.R Ahemdabad City 2023-24)

Providing and laying coloured glazed tiles of the size

mm in skirting, risers of steps and dedo on 10 mm.

thick cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.(iteam code

14036,S.O.R Ahemdabad City 2023-24)

Providing and laying marble stone slab flooring over

20mm (average)base of cement mortar 1:6 (1-

cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty :

1.5 - coarse sand) laid and jointed with gray cement

slurry including rubbing and polishing complete. (A)

Marble slab 25mm thick(iteam code

14011A,14.36,S.O.R Ahemdabad City 2023-24)

Providing and laying polished Kota stone slab

flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and

jointed with grey cement slurry mixed with pigment to

65 100.00 match the shade of slab including rubbing and Sqm 982.83

polishing etc. complete. (A) 25mm thick (iteam code

14012AA,14.43,S.O.R Ahemdabad City 2023-24)

Providing corrugated G.I. sheet of class-3 roofing

fixed with glavanished iron J or L Hooks, Bolts and

nuts 8mm diameter with bitumen and G.I. limpet

66 20.00 washer or G.I. limpet washer. filled with white lead Sqm 719.93

complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.(iteam code

15001A,15.1,S.O.R Ahemdabad City 2023-24)

Providing valleys 900mm overall in plain 1.6mm

thick G.I. sheet fixed with G.I. J or L Hooks, Bolts and

nuts glavanised iron J or L Hooks Bolts and nuts

67 10.00 8mm dia G.I. Limpet and bitumen washers Sqm 1042.78

complete.(iteam code 15003A,15.8,S.O.R Ahemdabad

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and

68 500.00 finished even and smooth in (iii) Cement mortar 1:6 Sqm 137.34

(1-cement:6-sand)(iteam code17002C,17.6,S.O.R

Ahemdabad City 2023-24)

Providing 20mm thick cement plaster in single coat on

single or half brick walls for interior plastering

upto floor two level and finished even and smooth in

69 400.00 (iii) Cement mortar 1:6 (1-cement:6-sand)(iteam code Sqm 165.38

17003C,17.61,S.O.R Ahemdabad City 2023-24)

White washing with lime on wall surface (two coats) to

give an even shade including thoroughly

booming the surface to remove all dirt, dust;

70 100.00 mortar drops and other foreign matter.(iteam Sqm 12.29

code18001,18.11,S.O.R Ahemdabad City 2023-24)

Removing dry or oil bound distemper by a washing

and scraping and sand papering the wall surface

smooth including necessary repairs to scratches

complete.(iteam code18014,18.33,S.O.R Ahemdabad

Distempering with dry distemper of approved

brand and manufacture (two coats) and of required

shade on wall surfaces of given an even shade, over

and including a priming coat of whiting after

thoroughly brooming the surface free from mortar

dropping and other foreign matter.(iteam code

18016,18.38,S.O.R Ahemdabad City 2023-24)

Finishing wall with water proofing cement paint of

on wall surfaces (Two coats) to give an approved

brand and manufacture and of required shape

even shade after thoroughly brushing the surface to

73 100.00 remove all dirt and remains of loose powered Sqm 56.87

materials.(iteam code 18027,18.51,S.O.R Ahemdabad

Extra over Item 73 for every subsequent coat of

water proofing cement paint of approved brand

74 100.00 and manufacture.(iteam code 18028,18.53,S.O.R Sqm 31.82

Ahemdabad City 2023-24)

Extra over item 73 for finishing with cement paint

on ceiling and sloping roofs.(iteam

code18029,18.54,S.O.R Ahemdabad City 2023-24)

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and

sand papered smooth.(iteam code 18031,18.57,S.O.R

Ahemdabad City 2023-24)

Extra over item 76 for every subsequent coat of

wall painting with plastic emulsion pain of approved

77 2000.00 brand.(iteam code 18032,18.59,S.O.R Ahemdabad City Sqm 33.39

Extra over item 76 for painting with plastic

emulsion paint of approved brand on ceilings

78 2000.00 andmsloping roofs.(iteam code 18033,18.6,S.O.R Sqm 5.36

Ahemdabad City 2023-24)

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including

79 100.00 cleanicn the surface of all dirt, dust and other Sqm 86.94

foreign matter.(iteam code 19002,19.7,S.O.R

Ahemdabad City 2023-24)

Painting one coats (excluding priming coat) on

previously painted steel and other metal surface

with enamel paint, brushing to give an even shade

80 100.00 including cleaning the surface of all dirt, dust and Sqm 54.35

other foreign matter.(iteam code 19003,19.11,S.O.R

Ahemdabad City 2023-24)

Painting two coats (excluding priming coat) on new

wood and wood based surface with ready mixed

paint, brushing, oil, gloss, semi gloss to give and

even shade including cleaning of all dust, dirt and

81 100.00 other foreign matter sand papering and Sqm 104.12

stopping.(iteam code 19014,19.77,S.O.R Ahemdabad

Varnishing two coats (excluding priming coat) on

new wood and wood based surface under coating

with flatting varnish and finished coat with varnish to

give an even surface including cleaning the

82 200.00 surface of all dirt, dust and sand papering so as to Sqm 54.18

produce a smooth dry surface.(iteam code

19015,19.84,S.O.R Ahemdabad City 2023-24)

Extra over Above item 82 for every subsequent coat

of varnish.(iteam code 19016,19.86,S.O.R Ahemdabad

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

84 2000.00 other foreign matter and sand papered smooth.(iteam sqm 40.19

code 19032,S.O.R Ahemdabad City 2023-24)

Demolition and disposal of unserviceable materials

with all lead and lift.(i) Lime concrete.(iteam code

85 30.00 20001B,20.1,S.O.R Ahemdabad City 2023-24) cu.m 603.23

Demolition including stacking of serviceable

materilas and disposal of unserviceable materials

with all lead and lift. (i) R.C.C. work(iteam code

20002,20.3,S.O.R Ahemdabad City 2023-24)

Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

87 60.00 lift. (i) In Lime Mortar.(iteam code cu.m 362.25

20003A,20.11,S.O.R Ahemdabad City 2023-24)

Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

88 200.00 lift.(ii) In Cement Mortar.(iteam code cu.m 544.95

20003B,20.11,S.O.R Ahemdabad City 2023-24)

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

89 700.00 disposal of unserviceable materials with all lead and Sqm 47.25

lift.(iteam code 20005,20.23,S.O.R Ahemdabad City

Dismentaling of wooden floors including stacking of

serviceable materilas and disposal of unserviceable

90 15.00 materials with all lead and lift.(iteam code Sqm 70.88

20006,20.25,S.O.R Ahemdabad City 2023-24)

Dismentaling of sheet roofing including ridges,

Hips, Valleys, Gutters etc. stacking of serviceable

materilas and disposal of unserviceable materials

91 101.00 with all lead and lift.(i) G.I.sheet roofing.(iteam code Sqm 47.25

20007A,20.27,S.O.R Ahemdabad City 2023-24)

Dismentaling of sheet roofing including ridges,

Hips, Valleys, Gutters etc. stacking of serviceable

materilas and disposal of unserviceable materials

92 200.00 with all lead and lift.(ii) A.C. sheet roofing.(iteam code Sqm 53.55

20007B,20.27,S.O.R Ahemdabad City 2023-24)

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

93 250.00 stacking them within all lead and lift.(i) Not Each 185.85

exceeding 3 Sq.M. in area.(iteam code

20013A,20.49,S.O.R Ahemdabad City 2023-24)

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain

water pipes with fittings and clamps including

stacking the materials with all lead and lift ( for any

dia, of pipe)(iteam code 20015,20.56,S.O.R

Ahemdabad City 2023-24)

Dismantling santtary fittings like wash basin . W.C.

pan Indian and European type, flushing tank etc.

including stacking the materials with all lead and

95 120.00 lift.(iteam code 20016,S.O.R Ahemdabad City 2023-24) Each 401.63

Dismentling barbed wire in fencing including

making rolls and also including dismentling fencing

posts including all earth work concrete in base and

making good the disturbed ground stacking useful

materials as directed and disposing as directed and

96 250.00 disposing of the unserviceable materials with all Rmt 66.15

lead and lift.(iteam code 20014,20.51,S.O.R

Ahemdabad City 2023-24)

Providing and fixing 1.20 Metre high fencing with

2.0 Metre long M.S. Angle posts 40mm x 40 mm x6

mm and oil painting 3 coats fixed at 2.5 Mt,C/c.

with five Horizontan lines and two diagonals of

galvanised steel barbed wire weighting 9.38 Kg. per

97 100.00 100 Metre, strained and fixed to posts with Rmt 385.40

G.I,staples including fixing the postsin ground with

0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

complete.(iteam code 22001,22.2,S.O.R Ahemdabad

Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

following nominal bore, tube fitting and clamps

98 10.00 including making good the wall ceiling and floor.(A) Rmt 244.13

15mm(iteam code 23001AA,23.2,S.O.R Ahemdabad

Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

following nominal bore, tube fitting and clamps

99 10.00 including making good the wall ceiling and floor.(B) Rmt 297.25

20mm(iteam code 23001BA,23.2,S.O.R Ahemdabad

Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

following nominal bore, tube fitting and clamps

100 10.00 including making good the wall ceiling and floor.(C) Rmt 393.93

25mm(iteam code 23001CA,23.2,S.O.R Ahemdabad

Providing and fixing to wall ceiling and floor 6.0 Kg.

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

101 300.00 clipsetc. including making good the wall ceiling and Rmt 78.12

floor.(A) 20mm(iteam code 23004A,23.8,S.O.R

Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor 6.0 Kg.

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

floor.(B) 25mm(iteam code 23004B,23.8,S.O.R

Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

103 100.00 clipsetc. including making good the wall ceiling and Rmt 116.40

floor.(C) 32mm(iteam code 23004C,23.8,S.O.R

Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure polythene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

104 300.00 clipsetc. including making good the wall ceiling and Rmt 274.68

floor.(F) 75mm(iteam code 23004F,23.8,S.O.R

Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

105 400.00 clipsetc. including making good the wall ceiling and Rmt 332.91

floor.(G)110 mm(iteam code 23004G,23.8,S.O.R

Ahemdabad City 2023-24)

Providing and fixing cast iron spigot and socket soil,

waste and ventilating pipes of the following

nominal size.(B) 75mm dia.(iteam code

23005BA,23.79,S.O.R Ahemdabad City 2023-24)

Providing and fixing cast iron spigot and socket soil,

waste and ventilating pipes of the following

nominal size.(C) 100mm dia.(iteam code

23005CA,23.79,S.O.R Ahemdabad City 2023-24)

Providing and fixing in position cowel went to

108 10.00 pipes.(B) 75mm dia.(iteam code 23006B,S.O.R Each 385.88

Ahemdabad City 2023-24)

Providing and fixing in position cowel went to

pipes.(C) 100mm dia(iteam code 23006C,S.O.R

109 10.00 Ahemdabad City 2023-24) Each 496.90

Providing and fixing cast iron (Spun) Nahni trap of

the following nominal diameter of self cleaning

design with C.I. screaed down or higned grating

including cost of cutting and making good the walls

and floor 100mm inlet and 50mm outlet.(C) 100mm

dia.(iteam code 23008,23.857,S.O.R Ahemdabad City

Providing and fixing water closet squatting Pan

(Indian type W.C. Pan) size 580mm (Earthwork, bed

concrete, foot reste and trap to be measured and

paid for separately) (A) Vitreous China.(I) Long

111 10.00 pattern = White colour(iteam code Each 926.10

23009,23.111,S.O.R Ahemdabad City 2023-24)

Providing and fixing wsh down water closet

(European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to

112 50.00 be measured and paid for separately)(A) vitreous Each 1290.80

China Pattern :(i) in white colour(iteam code

23010,23.112,S.O.R Ahemdabad City 2023-24)

Providing and fixing 100mm size P or S trap for

water closet squatting pan including jointing the

trap with the pan and soil pipe in cement Mortar

113 50.00 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.(iteam Each 311.85

code 23011,23.113,S.O.R Ahemdabad City 2023-24)

Providing and fixing wash basin with single hole for

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

but excluding fittings.(A) Vitreous China:(ii) Flat

114 40.00 Back washbasin 550 mm x v 400mm size. (i) In Each 1400.18

white colour.(iteam code 23018,23.127,S.O.R

Ahemdabad City 2023-24)

Providing and fixing 600mm x 450mm bevelled edge

mirrror of superior glass mounted on 6mm thick

A.C. sheet or plywood sheet and fixing to wooden

115 5.00 pluge with C.P. brass screws and washers.(iteam code Each 825.48

23024,23.143,S.O.R Ahemdabad City 2023-24)

Providing and fixing C.P. brass towel rail comlete

with C.P. brass brackets fixed to wooden plugs with

116 20.00 C.P. brass scews.(B) 600mm x 20mm size.(iteam code Each 597.22

23025,23.144,S.O.R Ahemdabad City 2023-24)

Providing and fixing screw down bib taps of

following size.(A) Brass screw down bib tap polished

117 120.00 bright. (i) 15mm dia.(iteam code 23028A1,23.92,S.O.R Each 184.98

Ahemdabad City 2023-24)

Providing and fixing screw down bib taps of

following size.(B) Brass chromium plated screws

118 12.00 down Bib Tap. (i) 15mm dia.(iteam code Each 184.98

23028B1,23.92,S.O.R Ahemdabad City 2023-24)

Providing and fixing brass screw down stop tap.(A)

119 30.00 15mm dia.(iteam code 23030A,23.96,S.O.R Each 203.79

Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-return

fullway wheel valve.(A) 15mm dia.(iteam code

23028A1,23.92,S.O.R Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-return

fullway wheel valve.(B) 20mm dia.(iteam code

121 15.00 23031B,23.99,S.O.R Ahemdabad City 2023-24) Each 201.80

Providing and fixing chromium plated brass half

trun flush cock of approved quality including fixing

122 20.00 in pipe line etc. complete.(i) 20mm dia.(iteam code Each 252.26

23032A,S.O.R Ahemdabad City 2023-24)

Providing and fixing chromium plated brass half

trun flush cock of approved quality including fixing

123 15.00 in pipe line etc. complete.(ii) 25mm dia.(iteam code Each 261.16

23032B,S.O.R Ahemdabad City 2023-24)

Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe , tap

etc. complete.(A) White earthenware flat back or

124 30.00 corner type size 430mm x 260mm x 350mm.(iteam Each 1026.01

code 23033,23.122,S.O.R Ahemdabad City 2023-24)

Providing and fixing Urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

125 25.00 white earthenware 550mm x 300mm.(iteam code Each 1535.63

23034,23.124,S.O.R Ahemdabad City 2023-24)

Providing and fixing ball cock of approved. quality

as directed.(A) Copper Metal (i) 25mm dia.(iteam

126 30.00 code 23037A1,S.O.R Ahemdabad City 2023-24) Each 131.57

Providing and fixing ball cock of approved. quality

as directed.(A) Copper Metal (ii) 50mm dia.(iteam

127 30.00 code 23037A2,S.O.R Ahemdabad City 2023-24) Each 187.96

Providing and fixing ball cock of approved. quality

as directed.(B) Abonite (i) 25mm dia.(iteam code

128 10.00 23037B1,S.O.R Ahemdabad City 2023-24) Each 101.89

Providing and fixing ball cock of approved. quality

as directed.(B) Abonite (ii) 50mm dia.(iteam code

129 10.00 23037B2,S.O.R Ahemdabad City 2023-24) Each 136.52

Providing and fixing plastic seat and cover for wash

down water closer with C.P. brass hinges and

rubber buffers. (B) Black plastic seal and cover.(iteam

130 100.00 code 23017,23.121,S.O.R Ahemdabad City 2023-24) Each 288.45

Providing and fixing Rubber plug for sink or wash

basin.(iteam code 23035 ,23.134,S.O.R Ahemdabad

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and

132 200.00 clamps including making good the wall, ceiling and Rmt 165.21

floor etc. complete.[A] 15 mm.(iteam code

,S.O.R Ahemdabad City 2023-24)

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete. [B] 20 mm.(iteam code

,S.O.R Ahemdabad City 2023-24)

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and

134 300.00 clamps including making good the wall, ceiling and Rmt 247.25

floor etc. complete. [C] 25 mm.(iteam code

23057,S.O.R Ahemdabad City 2023-24)

Providing and fixing concealed center point to wall

Ceiling & floor CPVC (SDR13.5) PIPE having National

Sanitation Foundation(NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [D] 32mm.(iteam code 23058,S.O.R

Ahemdabad City 2023-24)

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR13.5) PIPE having National

Sanitation Foundation(NSF)seal for potable water of

following dia. nominal bore tube fittings and clamps

136 200.00 including making good the wall, ceiling and floor etc. Rmt 437.66

complete. [E] 40mm(iteam code 23059,S.O.R

Ahemdabad City 2023-24)

Providing and fixing concealed center point to wall

ceiling & floor CPVC(SDR13.5) PIPE having National

Sanitation Foundation (NSF)seal for potable water of

following dia. nominal bore tube fittings and clamps

137 100.00 including making good the wall, ceiling and floor etc. Rmt 647.30

complete. [F] 50mm(iteam code 23060,S.O.R

Ahemdabad City 2023-24)

Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials.(iteam code 23061,S.O.R Ahemdabad City

Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials.(iteam code 23062,S.O.R Ahemdabad City

Providing laying and jointing in true line and level

32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials.(iteam code 23063,S.O.R Ahemdabad City

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe(SCH-40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.(iteam code

23064,S.O.R Ahemdabad City 2023-24)

Providing layingand jointing in true line and level

mm dia. U.P.V.C. Pipe(SCH-40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of

142 300.00 pipe and joints and fixing the same with adhesive Rmt 193.73

solvent, including cost of all materials.(iteam code

23065,S.O.R Ahemdabad City 2023-24)

Providing and fixing S.W. gully trap with C.I. grating

brick masonry chamber and water tight C.I. cover

with frame of 300mm x 300mm size (inside) with

standard weight.(i) Square mouth traps. (A)

100mm x 100mm size P type.(iteam code

24006AA,24.19,S.O.R Ahemdabad City 2023-24)

Providing cement vata (10cm. x 10 cm. size) quarter

round in cement mortar 1:1 including neat cement

finishing, watering etc. complete.(iteam code

17015,S.O.R Ahemdabad City 2023-24)

Providing and fixing 30mm thick factory made

moulded door shutter wood free consisting of

frame made out of M.S. tubes of 19 gauge thickness

and size of 25mm x 25mm for stiles, top and

bottom rails, M.S. frame shall have a coat of steel

primers. The inner panel shall consist of 25mm thick

High Density EPS conforming to IS 4671-1984

bonded with 2mm thick termite proof, water proof

and fire resistant moulded PVC sheet with

raised panel design in different plain and /or prelim

colours after routing the moulded design on one

side and 2mm plain and/or prelim PVC sheet on

other side of the EPS. The edges of panel to be

145 30.00 sealed with lipping of 10mm wide PVC sheet batton sqm 1960.00

(made by sticking 2 PVC rigid foam sheets of 5mm

thickness using PVC solvent cement) and stiles

25mm (5mm x 5) thick and 30mm width PVC sheet

fitted along M.S. tube for lock provision and for lock

height 5mm thick PVC sheet of size 150mm x

100mm fixed with upper and lower face of inner

side of EPS panel etc. complete as per direction of

Engineer in charge manufacture’s specification and

drawing.(iteam code 10049,S.O.R Ahemdabad City

Providing and fixing factory made polyvinyl chioride

(PVC) door frame of the size 50 x 47 mm with a wall

thickness of 5mm, made out of extruded 5mm rigid

PVC foam sheet, mitre out of two corners and

joined with 2nos. of 150mm long brackets of 15 x

15mm M.s. Square tubes. The two vertical door

profiles are to be reinforced with 19 x 19 mm m.s.

square tube of 19 gauge, EPDM rubber gasket

weather seal to be provided through out the frame.

The door frame shal be fixed to the wall using

146 30.00 65/100 mm long M.S. screws through the frame by sqm 314.88

using PVC fasteners. A miniumum of 4 nos. os

screws to be provided for each vertical members

and minium 2 nos. for horizontal members etc.

complete as per manufactures specification and

direction of Engineer in charge.(iteam code

10050,S.O.R Ahemdabad City 2023-24)

Providing and fixing M.S. grills of required pattern

to wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square or

round bars with round headed bolts and nuts or by

screws (A) Plain Grill.(iteam code 10025AA,10.1,S.O.R

Ahemdabad City 2023-24)

Providing and fixing M.S. grills of required pattern

to wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square or

148 200.00 round bars with round headed bolts and nuts or by kg 143.64

screws. (B) ORNAMENTAL GRILL(iteam code

10025BA,10.1,S.O.R Ahemdabad City 2023-24)

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and

material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion

149 200.00 with 19 liter give 1 % concrentration inclusive of Smt 104.90

one litre chemical emulsion appication at the rate

of 5 Litre chemical / Sqm of surface is

recommended as per I.S(iteam code 22007,S.O.R

Ahemdabad City 2023-24)

Carrying out timber treatment to all wood work

including drilling holes and spraying oil based

chemical solution on surface of timber work for

termite control including labor and material etc.

complete. Using Chlorpyriphos20 EC as per

2013 Part III (1% concentration by mass) is

150 200.00 recommended one litre chemical emulsion diluted Smt 54.98

with 19 liters of kerosene. Total diluted

concentration will be 20 liters inclusive of 1 liter

chemical emulsion application in drilled holes and

0.75 / Litre chemical per one Sqmt two coat on

wood surface not protected by paint or varnish.(iteam

code 22005,S.O.R Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-return

fullway wheel valve.(B) 20mm dia.(iteam code

151 15.00 23031B,23.99,S.O.R Ahemdabad City 2023-24) Each 201.80

Providing and fixing Gun metal check or non-return

fullway wheel valve.(C) 25mm dia.(iteam code

23031C,23.99,S.O.R Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-return

fullway wheel valve.(D) 32mm dia.(iteam code

23031D,23.99,S.O.R Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-return

fullway wheel valve.(E) 40mm dia.(iteam code

23031E,23.99,S.O.R Ahemdabad City 2023-24)

Supplying nece hardware, G.I.Fittings etc.comp of app.

155 Quality as under

S.S. Stopper 30 Cm long of ASIS

S.S. Stopper 20 Cm long of ASIS

S.S. Aldrop 20 Cm long of ASIS 304 Grade

S.S. Aldrop 25 Cm long of ASIS 304 Grade

S.S. Aldrop 30 Cm long of ASIS 304 Grade

S.S. Handle for door/ window 10 Cm size of ASIS

f 10.00 Grade No. 54.24

Ball cock of copper 25 mm diameter

Ball cock of copper 50 mm diameter

Ball cock of abonite 25 mm diameter

Ball cock of abonite 50 mm diameter

Labour charges - Carpentar 1st Class

Labour charges - Carpentar 2nd Class

m 10.00 Labour charges - Plumber (Fitter) Each 697.00

Labour charges - Plumber(Fitter)Assist

Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /

Rmt, horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x 1.30 mm @

wt.of 0.659 Kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, vertical member of size 40mm x 18mm x

156 15.00 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with Sqm 1696.73

5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing

to frame as per details etc complete for

window.(iteam code 11028,S.O.R Ahemdabad City

Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x 1.95 mm @

Wt 1.094Kg / Rmt with colour anodized

alluminium frame with 5 mm thick transparent

bronze colour tinted float glass with colour

157 20.00 anodized alluminium frame for ventilation with 5 Sqm 1288.93

mm thick frosted glass as details etc complete

for.window(iteam code 11029,S.O.R Ahemdabad City

Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 127mm x 38.10mm x 1.35mm @wt.

1.384kg/m, horizontal Four track member size

vertical member of size 122.20mm x 31.75mm x

1.50mm @1.398 kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm@

0.456kg/mt ,vertical member of size 40mm x 18mm x

1.29mm @ 0.456 kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as

per details etc complete for window.(iteam code

11026,S.O.R Ahemdabad City 2023-24)

Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x

mm,@ Wt 1.094Kg / Rmt with colour anodized

alluminium frame with 5 mm thick transparent

bronze colour tinted float glass as details etc

complete for Fix window.(iteam code 11031,S.O.R

Ahemdabad City 2023-24)

Providing and fixing window having extruded

aluminum Colour Powder Coated section frame

main outer size 63.50 x 38.10 x 1.95 mm,@ Wt

1.094 Kg / Rmt, horizontal two track member size

Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.0.659 Kg/mt with

sliding shutters of horizontal member size 40mm x

160 10.00 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical Sqm 1688.78

member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

complete for window.(iteam code11034,S.O.R

Ahemdabad City 2023-24)

Providing and fixing rolling shutters of approved

make made of 80 mm wide M.S. laths inter-locked

together through their entire length and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates,

guide channels and arrangements for inside and

outside locking with push-pull operation complete

but excluding the cost of hood cover and spring. (A)

Shutters having width below 3.5.M.(iteam code

11006A,11.9,S.O.R Ahemdabad City 2023-24)

Providing and fixing 27.5 cm. long wire spring grade

No.2 of approved make for rolling shutters.(iteam

162 5.00 code 11007,11.1,S.O.R Ahemdabad City 2023-24) Each 630.91

Providing and fixing Hood cover for rolling shutters (A)

Shutters having width below 3.5 meters(iteam code

163 25.00 11008A,11.11,S.O.R Ahemdabad City 2023-24) Rmt 120.03

Providing and laying Cement concrete 1:5:10 (1-

Cement : 5-Fine sand :10-Graded stone aggregate

40mm nominal size) bedding for stoneware pipes of

following internal diameters with necessary

formwork and curing complete.(A) 100 mm dia.

(112 mm Ave.bed thickness)(iteam code

24002A,24.2,S.O.R Ahemdabad City 2023-24)

Providing and laying Cement concrete 1:5:10 (1-

Cement : 5-Fine sand :10-Graded stone aggregate

40mm nominal size) bedding for stoneware pipes of

following internal diameters with necessary

165 30.00 formwork and curing complete.(B) 150mm dia. Rmt 211.59

(166mm Ave. bed thickness)(iteam code

24002B,24.20,S.O.R Ahemdabad City 2023-24)

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

166 5.00 foundation concrete 1:5:10 inside plaster 15mm Each 2903.89

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe

line.(iteam code 24016AA,24.44,S.O.R Ahemdabad

Extra over items 136 for every additional depth of

0.1M. of part thereof beyond 450mm depth for

167 16.00 Brick masonry chamber.(i) for 455mm x 610mm Each 239.99

size.(iteam code 24017A,24.46,S.O.R Ahemdabad City

RCC Precast M.H.Frame & Cover Manufacture , supply

& Delivery at store or at side of work Precast RCC

M200 Frame & Cover Suitable to drainage M.H. and as

168 per type design & Drawing including cost of

reinforcement M.S. Angles or Flat , cutting mold work

etc.(GWSSB SOR 2021-22)

Frame Suitable for 50 Cm opening of MH

Cover Suitable for 50Cm Opening Of MH

Frame Suitable for 50 Cm opening of MH

Cover Suitable for 50Cm Opening Of MH

House connection Chamber Light Duty

1 5.00 Frame No. 911.00

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm

length,30cm height and 15cm thick of M200 grade

concret as per approved design and including

169 30.00 excavation for fixing in proper line and level,filling Rmt 376.43

the joint with C:M 1:3 (1cement:3fine sand) etc

complete.(iteam code 14023A,S.O.R Ahemdabad City

Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand

layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-

2018 etc. Complete. (iteam code 14033,S.O.R

Ahemdabad City 2023-24)

Providing and fixing eco-friendly light weight

calcium silicate false ceiling tiles having Tegular

edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight

calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part

IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine

fissured/ Spintone/Cosmos having NRC value of 0.5 &

Globe having NRC value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per

sqm including both side) consisting of main ‘T’

runner suitably spaced at joints to get required

171 40.00 length and size of 24X38mm made from 0.30 mm Sqm 1632.63

thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along

spaced between main ‘T’ at 600mm centre to

centre to form agrid of 1200X600mm and

secondary cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm thick (Minimum)

sheet(iteam code 16006,S.O.R Ahemdabad City 2023-

Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both

side inclusive) as per IS : 277 and consisting of angle

cleats of size 25 mm wide x 1.6 mm thick with flanges

of 27 mm and 37 mm, at 1200 mm centre to centre,

one flange fixed to the ceiling with dash fastener

mm dia x 50 mm long with 6 mm dia bolts, other

flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts

of required size and other end of angle hanger fixed

with intermediate G.I. channels 45x15x0.9 mm

running at the spacing of 1200 mm centre to centre,

to which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm each

having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out

of 2.64 mm dia x 230 mm long G.I. wire at every

junction, including fixing perimeter channels 0.5 mm

thick 27 mm high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wall/partition

with the help of rawl plugs at 450 mm centre, with

mm long dry wall screws @ 230 mm interval, including

fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of

size 3.5 x 25 mm at 230 mm c/c, including jointing and

finishing to a flush finish of tapered and square edges

of the board with recommended jointing compound

jointing tapes , finishing with jointing compound in

layers covering upto 150 mm on both sides of joint

and two coats of primer suitable for board, all as per

manufacturer’s specification and also including the

cost of making openings for light fittings, grills,

diffusers, trap doors, cutouts made with frame of

perimeter channels suitably fixed, providing

additional sections for strengthening the

oenings/cutouts, Trapdoors all complete as per

drawings, specification and direction of the Engineer

in Charge. Area of cutouts shall not be deducted and

no extra payment shall be considered for additional

sections provided. Only plan area shall be considered

for payment. All curved surfaces, recesses, waffles and

corbellings shall be part of the false ceiling & flat area

in plan shall be measured for payment. The rates are

also inclusive of necessary scaffolding, tools, tackles

etc. Complete for all floors and height with frame

wherever required for electrical & A.C. fixtures & grill

all as per drawings, specification and direction of the

Engineer in Charge. all as per manufacturer’s

specification and as per drawings, specification and

direction of the Engineer in Charge. Excluding the cost

of painting with :

12.5 mm thick tapered edge gypsum plain board

conforming to IS: 2095- Part I

Dismantling aluminium/ Gypsum partitions, doors,

windows, fixed glazing and false ceiling including

173 250.00 disposal of unserviceable surplus material and stacking Sqm 17.68

of serviceable material with all lead as per instruction

Providing and fixing in position Marine Plywood of

specified thickness following code IS 710 - 1976 of

approved makes as per Interior design drawing/

Instruction of EIC for all type of loose and fixed

174 9.00 furniture, Panelling, Partition, Bed head panel etc. The Sqm 806.25

rates are inclusive of all lead and lift,all floor levels, all

heights, all material, fixing, scaffolding, labour,

Wastage etc. complete in all respects.

a)Plywood 19mm th.

Extra over for plastering on ceilings and sofits of

stairs upto floor two level instead of plastering on

175 100.00 walls.(iteam code 17006,17.91,S.O.R Ahemdabad City Sqm 24.57

20 mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of

mm thick backing coat of C.M.1:3 (1-cement:3-

sand)and8mmthickfinishingcoatof C.M. 1:1 (1-cement

: 1-sand) etc. complete.(iteam code 17009,17.95,S.O.R

Ahemdabad City 2023-24)

Cutting out cracks of roof terrace to V- section

cleaning out, wetting , grouting with cement and sand

177 10.00 slurry 1:3 (1-cement 3-sand )(iteam code Rmt 64.58

221002A,21.23,S.O.R Ahemdabad City 2023-24)

Conveyance charge of earth, lime, murrum, building

rubbish, manure, garbage, sludge, excavated rock, fly

ash, aggregates of any kind executed outside the road

178 site. Rate also includes spreading & levelling etc

complete. Internal conveyance above 50 mt done

within the work site is not payable.

90.00 a) Lead From 5 Km to 10 Km. Cmt 78.54

95.00 b) Lead From 10 Km to 15 Km. Cmt 104.65

P/A Tremix with dewartering machine and floater

machine on constructed CC work for finishing the

surface as per requirement. The rate including all

179 60.00 machinaries, labor, loading, unloading, transportaion SMT 54.00

etc complete as per direction given by engineer in

Making 15 mm. Groove in RCC work on road & filling it

with polysulfied selant & finished ot good incl. all

labour charges etc. comp.as directed.

Repairing damaged M.H. and rasing M.H. up to road

level incl. removing damaged brick work and repairing

by brick masonry in C.M. 1:5 and plaster in C.M. 1:3

and fixing C.I. steps and existing MH sheet cover,

removing the debris from MH and carting the same

(A) up to 0.15 mt. (@ Two Coarse)

(B) up to 0.35mt. (@ Four Coarse)

(C) up to 0.65 mt. (@ Seven Coarse)

Constructing Chamber of following size including

excavation, refilling, BBCC (1:5:10) for foundation,

C.C.Channel (1:2:4), finished 15 mm thick cement

182 plaster inside in CM 1:3, finishing with cement slurry,

Brick masonary in CM 1:5 & excluding the cost of

chamber seat cover etc.completed.

0.60 X 0.45 mt. size Inside Clear, Depth from

a 2.00 to 0.90 meter No. 2261.61

0.60 X 0.75 mt. size Inside Clear, Depth from

b 2.00 to 0.90 meter. No. 2874.11

0.75 X 0.75 mt. size (Inside Clear) Depth from 0.0 to

Constructing Bombay Pattern Type Catch Pit of size

0.60 x 0.60 depth up to 1 mt including excavation,

B.B.C.C. (1:5:10), 23 cms thick brick maso. wall in the

prop. of CM (1:6) with 40 mm thick IPS flooring in the

183 5.00 prop M15 at bottom and 15 mm thick cement plaster No. 3110.80

inside the catch pit in the proportion of CM (1:3) with

out jali etc. comp. as directed.

CatchPit Jali (Heavy duty) Fixing P/F FRC catch pit jali

184 5.00 with frame 600mm x 600mm clear opening etc. comp.. No. 1377.64

As directed by engineer in charge.

R. C. C. PIPE (Vertical Cast) Providing and supplying ISI

Standard R.C.C. pipes in standard lengths of following

class and diameter suitable for either collar joints or

rubber ring joints including all taxes, insurance,

transportation, freight charges, octroi, inspection

185 charges, loading, unloading, conveyance to

departmental stores, stacking etc Note : One collar

should be supplied with each full length plain ended

RCC pipe, cost included in rates below. One rubber

ring should be supplied with each full length socketed

pipe, cost included in rates below.

Lowering, laying and jointing R. C. C. pipes of

following diameters in proper position, grade and

185 alignment at all level as directed by Engineer-in-charge

A including conveyance from stores to site of work,

labour, giving hydraulic testing as per ISI code.

Providing and supplying,and jointing ISI mark only

standard length stoneware pipes of following class and

diameter including excavation for laying of pipes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

186 departmental stores, stacking etc. compl. (IS651/1989

or its latest revision) including labour work for

lowering, laying, joiting with cement mortar (1:1)

proportion, proper postion, grade and alignment and

all level as directed by engineer in charge including

store to site of work jointing material etc complete.

a 10.00 100 mm dia Rmt 165.52

b 10.00 150 mm dia Rmt 242.98

c 10.00 230 mm dia Rmt 400.54

Hiring Charges For J.C.B.Machine Inclduing Cost Of

187 15.00 Fuel, Operator, Dirver Etc.. Hr 600.00

Supplying Pneumatic Breaker Machine for RCC Slab or

Asphalt Demolishing Work on site by using Operator,

fuel, power Supply etc. Complete as Directed. (No

payment should be allowed for non working condition

188 40.00 of machinery and for pipe line excavation and M.H. Hr 600.00

work. Allowed only for break down work) (Based on

Previously approved rate by C E sir )

Constructing Slab type M.H. Chamber of the following

size including excavation, refilling, brick bats cement

concrete (1:5:10) of thickness 15 C.M., CC Channel

(1:2:4) of thickness 10 C.M., finished 15 mm thick

cement plaster inside & outside (Only for shaft) in CM

1:3, finishing with cement slurry, P/F 4 mm dia

189 M.S.Steel HDPE coated steps 35 cm c/c at 35 cm

staggered in masonary CM 1:5, RCC Slab in CC 1:1.5:3

of thickness 23 C.M., including Cantering &

reinforcement (double jalli at 15 C.M. c/c bothway

mm dia.) but excluding the cost of Manhole seat cover

etc..completed. of Size 1.00 X 1.40 meter (Inside

Clear, M.H. length should be parallel to the flow.

1.00 to 2.00 meter depth, (Slab at Ground level)

2.00 to 3.00 meter depth, (Slab at below 0.6 mt. From

3.00 to 4.00 meter depth, (Slab at below 1.00 mt.

c 2.00 From G.L.) No. 26867.86

Making connection to the ex.M.H.in running sewer

incl. Dewatering and other required machinery etc. of

190 following dia pipes at any convenient time. All

damaged work shall be well repaired as per

instructions. etc..complete.

a 8.00 a. 150 mm to 300 mm dia. No. 1339.29

Cutting the pipes of following dia coming in the new

M.H.in running sewer including cutting bars, including

removing debris /silt from the M.H. and carting at a

191 suitable distance etc..complete as directed. No

payment for M.H. work will be made until pipe is not

cut completely in all respect.

a 9.00 150 mm to 300 mm dia. No. 1133.93

Providing Kachha of Pakka Dummy in the following

dia pipes and removing the same after completion of

the connection work as directed.

a 5.00 (A) 100 mm to 300 mm dia. No. 199.11

b 5.00 (B) 350 mm to 600 mm dia No. 302.68

Providing Dead Cantering using good quality Country

Wood Planks, wall Plate of required thickness and size

including placing the nece. supports of reqd. size,

193 15.00 nailing, fixing with mortar, levelling. All specification Smt 312.50

for dead centring as per standard engg. practice etc.

comp. as directed.

Providing and operation dewatering Pump including

fuel charges & operator Charges etc. as directed etc.

comp. (Shift for Eight Hour) (For Each Pump Set, No

payment should be allowed for non working condition

Providing & Fixing the double layer safety net along

the scafolding to avoid any free fall of debris etc.

195 60.00 complete. Smt 194.00

Providing & Fixing the green/black colour hessaian

cloth to cover the scafolding etc. complete.

Structural steel work ( Confirming to IS 4923- 1997)

riveted, bolted or welded in builtup for all type

sections, in framed work, including cutting, hoisting,

fixing in position and applying a priming coat of

approved steel primer all complete as per the

structural designs and

directions of Engineer in charge. Safety grills/doors of

required pattern for windows / Door/ ventilators using

M.S. flats/bar/box sections as per design and drawing

including one coat of primer.(iteam code20054,S.O.R

Ahemdabad City 2023-24)

F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers

& Frames Cover : 728mm ø & 100 mm thick circular

cover, 35.00 MT load design, 100x2mm MS flat

allround, 16mm ø plain round bar for lifting the cover

& should be fitted with plastic cups. Frame : 560 mm ø

198 10.00 clear opening, outer size- 888x888x175 mm. On the Set 3354.74

upper periphery of frame 25 x 3 mm wide MS flat

should be well embed in concrete to protect the

edges of frame. FRC E.H.D.-35 manhole cover & frame

described as above

F.R.C. Heavy Duty [HD-20] Machinehole Covers -

mm ø clear opening, The dimension of frame and

199 5.00 cover as per mentioned in Amend No.1 to IS 12592 : No. 1720.44

F.R.C. Medium Duty [MD-10] Machinehole Covers -

560mm ø clear opening, The dimension of frame and

cover as per mentioned in Amend No.1 to IS 12592 :

Carting and Fixing M.H., Chamber or Catchpite Seat

and Cover in line and level to match exisisting road

level in C.C. 1:2:4 and finishing smooth, watering and

protecting for 7 days etc. complete as directed. M.H.

seat cover will be supplied byA.M.C.(from any store)

Supplying, labour for break down repairing work for

activities like excavation, disliting, removing debris

from trench back filling etc. comp. as directed by

202 Eng.in charge.

20.00 Mazdoor at day /Night No 363.30

20.00 Fitter at day / Night No 380.30

Makadam/ supervision at day / Night

P/F. to wall ceiling and floor galvanized mild steel

tubes (Medium grade) of the following nominal dia.

with all tube fittings and clamps incl. making good the

wall, ceiling and floor. (At any floor level) (Bldg.Sor

Providing & Applying Cement Popada Plaster In

Cement Mortar In 1 : 3 Incl. Cleaning Surface Before

Plastering Rate Also Incl. Scafloding, Watering , And

Neat Finishing Etc. Comp. As Dire.(N.S./ARC)

Providing and applying fibere reinforced cementitious

micro concrete work in cellings and beams

incl.mixture of CEMSCREED HM (F) fair mate company

material, FBR bonding agent material with water in

205 300.00 suItable proportion anti corrosive treatment on Smt. 530.00

exposed beam,celling steel bars with safeCore R

incl.all kind of labour etc.comp.including three coat of

white wash.(Approved Rate in ARC)

Labour Work for moulding the polish kota stone

surface rate also including provding cutting and

grinder machine for molding work etc.complete as

206 60.00 directed.(app.rate) Rmt. 150.00

Labour work for Polish kota stone surface rate also

including providing cutting and grinder machine for

molding work etc comlete as directed.(app. rate)

Providing And Laying Cement Concrete Flooring For

I.P.S.1:2:4 (For Indian Patent Stones) (1 Cement:

Coarse Sand:4 Graded Stone Aggregate 20 Mm.

208 350.00 Nominal Size) Lain In Layer Finished With A Smt. 198.45

Floating Coat Of Net Cement.(40 Mm Th.)(SOR

Additional Rate For Providing Water Proofing Solution

Providing and Fixing pvc.Door (sintex door-equivalent)

with necessary alluminium fitting with EL-7 section

frame (Approved Rate as per ARC)

P/F glass of 4 mm thik for vent lowers and window

with wooden border patti as per instruction of eng. In

211 100.00 chage.(app.rate) No. 150.00

Providing and fixing rough cast wired glass 6 mm thick

bedded in putty and thick with wooden beading

212 including the cost of wooden beadings of Indian teak

wood and necessary cutting of glass. (SOR 2021-22 PG

50.00 (C) wired figured glass. Smt. 659.58

Labour work for fixing above or any interlocking

blocks/nimbhada on up to 50mm th sand

bedding,levelling,watering anf fixing. Rate incl.

213 300.00 average 30cm depth for excavation and or Smt. 69.64

filling,carting away debries/excavated material up to

km and cleaning the site etc.comp. as directed.I00194

Providing & Laying China Mosaic Flooring On Terrace

With 6Mm Th.White Or Coloured Glazed Tiles Chips Of

Mini.25 To 35Mm Approved.Square Or Rectangular

Shape & Fixing It.Before Start The Work Remove All

Existing Flooring & Open Old Slab Surface With Wire

Brush & Fill Crack If Shown With Water Proof

Material.Than For Making Level Gps.Work Done In

Mini.45 To 50 Mm Th.& Fixing.China Mosaic In Cm

214 40.00 1:3 With Neat Cement Slurry At Top & Filling The Gap Smt. 700.00

With White Or Colour Cement With Finishing

Smooth Surface & Even Shade Incl.Cleaning Of

All Dirt,Dust & Other Foreign Matter.Rate

Including For Making Colour Patta,Round Vata

With Fixing Neccessary Water Spout Opening Gap

Etc.Comp.As Directed.(As per A.R.C)

Providing and laying polished granite stone slab

mm thick in risers of steps, dedo and pllars laid on

mm thick cement mortar 1:3 (1 cement : 3 coarse

215 30.00 sand) and jointed with gray cement slurry including Smt. 2672.00

rubbing & polishing etc. complete. (SOR 2015-2016,SR.

Providing & fixing 2.00 mm thick F.R.P. sheet of good

quality and standard make rate also includes

necessary fabrication structure in the grid of 1'-6" x 1'-

6" size usiung hollow pipe of size 3/4" x 3/4" , 2" x 1"

& 1" x 1" rate also inclusive necessary bending

216 60.00 ,cutting and fabrication charges and priming coat and Smt. 1865.00

2 coats of oil paint of shade approved by engineer in-

charge rate also includes washer and silicon paste

required for fixing the sheet in good quality as

diredted.(As per ARC)

Conveyance charges of earth lime, murrum, building

rubbish, manure, garbage, sludge, excavated rock, fly

ash, aggregate of any kind etc. comp. upto 5 km lead.

Providing & Fixing Chromium Plated Brass Flush

Cock With Lever Of "Ess Ess" - Trend Series Or

218 5.00 Equivalent Make Incl.Fixing In Pipe Etc.Comp.As No. 1800.00

Dir.Of Engg.In Charge.(N.S.) (1) 25 Mm Dia.I00117

Provdg. & fixing 12.5 lit.PVC Flush tank with

nece.fixtures etc.comp as per site condition (R&B Sor

P/F Jet Spreay at Europeon WC Pan, incl nece. lath

connection, stop cock, and other fixing material and

220 200.00 labour as per inst. of engineer in charge(R&B Sor 21- No. 361.00

Providing & Fixing Polytheline Over Head Tank With

Necessary Dia.Holes For Outlet,Inlet Over Flow And

221 10000.00 Washout Necessary Washer And Checkput lit 7.72

Etc.Comp.(N.S.) I00105

P & F app.quality for Conseal lock in Alu.door .as per

inst of engg in charge .etc.comp.(app.rate)

P & f app.quality for brass baby latch (door stopper)

223 10.00 as per inst of engg in charge .etc.comp (app.rate) No. 180.00

Providing & Fixing In Position Alluminium Doors With

Frame Using Approved Quality Anodised Extruded

Alluminium Section As Approved By Engg.In

Charge(Jindal Alluminium) (A)Frame Sections

101.6x44.45 Mm(B)Shutter Bottom Vertical & Top

Section 83.5x44.45 (Wt.1.31 Kg/Mt.)(At

1.31Kg/Mt)(C)Shutter Bottom Section At14.3x44.45

Mm At (1.37 Kg/Mt) Shutter Middle Section At

100x44.3 Wt.(1.37Kg/Mt) Incl.Providing & Installing

Mm Thick Approved Color Acrylic Sheet Of Standard

Quality Fixed With Glazing Chips On Upper Pannel

& Laminated Sheet On Lower Pannel (Wtt.0.13

Kg/Rmt) Etc.Comp.As Direction Of Engg.In Charge.

Providing & Fixing In Position Alluminium Window

Sliding / Fix Type With Frame Using Approved

Anodised Extruded Alluminium Section As Approved

By Engg.In Charge.(Jindal Alluminium) Units

Equivalent (A) Frame Sections 65 X 25 Mm (At

0.41kg/Mt) (B) Sliding Frame Bottom Section Of

X31.75 Mm (At 0.41 Kg/Rmt) (C) Shutter Top &

Bottom Section 40 X 18 Mm (Wt.0.41 Kg/Rmt) (D)

Shutter Interlock Vertical Section 10 X18 Mm.(0.41

Kg/Rmt) (E) Shutter Vertical Of 40 X 18 Mm (0.41

Kg/Rmt) Including P/F Installing 5 Mm Thick

Approved Color Acrylic Sheet Of Standard

Quality Etc.Comp.(N.S.)

Provding & fixing Aluminum section partition with

powder coating using 2.5'' x 1.5'' all section work

incl.p/f 5 mm thick glass in upper portion and 10 mm

226 90.00 th. Novapan panel in lower section Work incl.fixing the Smt. 2500.00

partition in wall/floor with nece.screws,rubber gasket

& other fittings etc.comp. as directed by

engg.incharges.

Providing & Fixing In Position Alluminium Vents With

Frame Using Approved Anodised Extruded

Alluminium Section As Approved By Engg.In

Charge.(Jindal Alluminium) Units Equivalent

227 35.00 (Approved Rate) Frame Section Of 63.50 X 38.50Mm Sq. M. 1950.00

(Wt.0.68 Kg/Rmt) Incl.Providing & Installing 5 Mm

Thick Approved Color Acrylic Sheet Of Standard

Quality Etc.Comp. I00136

Providing fiiter for D.I./P.V.C./C.I./M./A.C. Pressure

water pipe linmaintenance work with necessary

manpower, tools, plants, and equipments, and any

other works required for AMC as per instruction of

Engineer in charge etc. complete. I03723 As per

Providing and fixing stoper (M.S.) 6 inch with

necessary fiting in wooden door including removel of

old fiting if any etc completed as directed. I00870

Providing and fixing Aldrop 10 mm size (M.S.) with

necessary fiting in wooden door including removel of

230 35.00 old fiting if any etc completed as directed. I00872 No. 158.00

Providing and fixing handle (M.S.) 4 inch size in with

necessary fitting in wooden windows including

removal of old fitting if any etc completed as

directed.I00873

Providing and fixing stopper (aluminium) 6 inch with

necessary fiting in wooden door including removel of

old fitting if any etc completed as directed. I00890

Providing and fixing Aldrop 10 mm size (aluminium)

with necessary fiting in wooden door including

233 25.00 removel of old fiting if any etc completed as directed No. 138.00

Providing and fixing handle (aluminium) 6 inch size in

with necessary fitting in wooden door including

234 30.00 removal of old fitting if any etc completed as No. 36.00

directed.I00889

Reparing of existing Aluminium

window/door/partition by making necessary

addition/alteration in same sides. Rate incl of

necessary fittings required and all labour included. If

necessary rate also incl. of removing from position and

refixing it at same place after repairing it, etc comp. as

directed. Sub Desc : As per approved rate of AMC MET

Repairing of Doors/Windows shutters and Frames

including refixing-aligning shutter, providing,

236 60.00 replacing, fixing MS hinges, Aluminium aldrops, No. 250.00

stoppers, tadi etc. complete excluding painting as per

specifications.(app.rate)

Providing & Fixing wall,ceiling and floor 10 Kg.F/Sq.Cm

160 mm working pressure polythelene pipes of low

density, complete with special flange compression

type fittings,wall clips etc.making good wall ceiling and

floor as directed by engg.in charge etc.comp.

P/F. 10 mm thick Novapan sheet of approved quality

including fixing on partition with necessary all fixtures

as directed by engg.in charge etc.comp

P/F. new 12.5mm th. Gypsum board ceiling with

necessary heavy weight GI framing members as per

site requirement.Work incl. Supplying of app.brand

239 80.00 gypsum boards and fixing it as false ceiling in line and Smt. 650.00

level with all necessary hardware and labour etc.

comp.as dire. (At any floor level)

GLASS FILMS (sun control, Safety film, decorative,

reflective, frosted, opaque film etc) Imported Lumaar

make as approved by engg.in charge etc.comp.

Providing and fixing 4 mm th. Acrylic sheet of

approved quality including fixing with door/window

241 20.00 shutter & frames with necessary all fixtures as dircted Smt. 3140.00

by engg.in charge etc.comp.

Providing & Fixing Floor Spring including fixing shutter

242 1.00 etc. complete as per inst. of engineer in charge. No. 3300.00

P/F. thermocol ceiling with necessary aluminium T

section 25 x 25 x 1.2 mm inclusive fixing it to all wall to

ceiling junction and at junction position of two sheets

,item also includes p/f 20 mm thick plain thermocol

243 10.00 sheets size (1 x 0.5 mt) with all necessary fastening Smt. 375.00

and hardware etc. comp.as dire. (At any floor level)

labour charge for cleaning U.G. and O.H. tank by

modern science technology with six stage process as

below: (1)Dewatering existing water by submersible

pump. (2)Hydro jetting by 150kg/sqcm

pressure.(3)Vaccum cleaning to suck the sludge and

turbidity on bottom surface.(4)Heat air system by 80C

temp for drying corners and all side of

tank.(5)Antibacterial chemical spraying to all surface

244 of tank and then(6)Ultra-violet radiation pan

treatment to tank in this six stages on site classic

supply etc.Electric connection shall be provided by

AMC MET without charging any extra cost.the

complete tankcleaning by micro cleaning system

comp. as ditected.rate of above process are as below

capacity of tank.

A 20.00 up to 5000 litre NOS 1200.00

B 2.00 5000 litre to 10000 litre NOS 1500.00

C 1000000.00 Under Ground water tank LITER 0.05

Providing and applying texture paint at approved

quality, colour scheme, including preparation of

surface, primer 2 coats+2 coats of putty and texture

245 300.00 paint, as per manufacture's specification, scaffolding, Smt. 495.00

roller finish etc complete as per instruction of

engineer in charge

Supplying and installation of 10mm thick recycled

rubber flooring having anti-skid and sound absorbing

properties, square shaped, with different color optns

for create flooring pattern, should be installed with

proper adhesive as per manufactures's guidelines,

joints of surface to be done properly to prevent dirt &

watepenetration inside the surface. etc complete as

per instruction of engineer in charge

Arrangement of zula with two or nece. skilled labour

for repairing & maintenance work out side building

work etc.complete as per insructer incharge(At any

247 60.00 floor level) No. 950.00

Providing Scaffolding for Demolition Plaster Work &

painting workby 'H' Frame Stand of by any means like

bamboo, balli etc. including carting material work site

248 500.00 and removing after completion of work. Rate include Smt. 40.00

any type rent etc. complete for any height as directed

by engg. in charge.

Providing, Manufacturing, Fixing Chain Link Jali 8".0" X

4".0" as per detailed Sketch & instruction of Engineer

in Charge same as Lal Darwaja Garden Pattern

Consisting of 3" dia MS pipe A class 5".4" height fixed

at 8".9" in C.C. (1:2:4) block of 9" X 9" X 9" size chain

link jali 2" X 2" X 10 gauge fixed in 35 X 35 X 5 mm MS

angle frame of 8".0" X 4".0" size with MS flat of size

25X3 mm welded with jali etc. Comp. The Jali is to be

Welded to MS angle with MS Flat as per instruction

given. The MS Pipe Jali, MS angle frame are to be

painted one coat of primer & two coats of paint as

directed, in line and level.The two hold fast has been

welded at equal distance at the bottom angle of jali

for support fixed in C.C. as directed by Engg. in Charge.

Providing and fixing Aluminum Composite Panel

signages of various size and in any language. The 2 mm

thick Aluminum composite panel shall be cladded with Sq.

retro reflective high intensity grade radium sheets. Inches

The signages shall be of any language

251 10.00 G.I. Coupling 50 mm dia A-Class RMT 80.51

252 10.00 G.I. Coupling 40 mm dia A-Class RMT 40.68

Providing & Fixing Door closer-complete of Approved

make to wooden / Alluminium Doors as per direction

of engg.in charge.(N.S.)

Providing and applying pressure grouting with Water

proofing materials silicon baseWater repellent

compund including matrial, labour with required all

machinery and etc complete. (R.A.)

Providing and fixing Polycarbonate roof Lexan sabic

mm th.sheets of approved make, on structural roofing

/ sky ligh structures in shapes as per Architect’s

255 1600.00 drawing. The rate shall include cost of scaffolding, Smt. 2094.29

screws, nuts, bolts and all necessary fixtures and

fastening etc complete (Rate excluded structural steel

Providing and laying brick bat coba water proofing of

average 100 mm. thick for sunk, balcony, terrace, rain

water gutter at all heights/ floors using cement mortar

1:3, arranging brick bats according to the slope, adding

suitable water proofing compound for water-tightness

and again providing on top cement mortar 1:3

including addition of waterproofing compound and

finishing the top with neat cement @ 2.75 kg/m² and

256 400.00 preparing the rough surface if required as per Smt. 567.00

direction and instructions, complete. The work should

be carried out through an approved specialized

agency. The contractor to give testing for water

tightness and provide guarantee for 10 years on Rs.

300/- stamp paper in approved Performa. as directed

Providing and injecting approved grout in proportion

recommended by the manufacturer into

cracks/honey-comb area of masonry by suitable gun/

pump at required pressure including cutting of nipples

after curing etc. complete as per directions of

Engineer-in-Charge. Stirrer mixed SBR Polymer(of

approved make) modified Cement slurry made with

Shrinkage Compensating Cement in masonry work.

(The payment shall be made on the basis of actual

weight of approved grout injected.)

Providing & Placing dual shrinkage-compensated,high

flow cementitious microconcrete added with

aggregates in 1:0.5 (1 Powder:0.5

aggregate)proportion & suitable water microconcrete

ratio so as to acheive compressive strength not less

than 40MPa at 28 days for column jacketting inclusive

258 1.00 of Labour, material, curing and equipment for all Cmt 28647.00

heights, location, shape & size as directed by the

architect/engineer incharge. (The mode of

measurement shall be as that of RCC as per IS

code)(APPROVE-ARC)

Providing & Applying One componant dual shrinkage-

compensated structural Grade ready to use repair

mortar in two or three layer for repairs of beams etc.

including all materials, labour etc. for all heights,

location, shape & size.The finish surface to be level

259 100.00 matched with the existing adjoining surface etc. Kg 40.40

complete as directed by Architect/Engineer Incharge.

[Quantity consumed shall be accounted for payment

purpose].(APPROVE-ARC)

Providing & applying one or more coats of

Nondegredation(which dont reqire removal), acrylic

resin based membrane forming single componant

liquid curing compound for sealing of moisture &

260 15.00 curing including all materials labour etc. for all Smt 57.00

heights,locations, shape & size as directed by the

engineer incharge.(APPROVE-ARC)

Providing & applying of 6-9 mm thick 1:3 CM (1

Cement : 3 fine sand ) mortar over one coat of epoxy

bond coat on all type of surface for all shape,size &

261 5.00 height including all labour, material,scaffolding, curing Smt 661.00

etc.complete as directed by the Engineer

incharge.(APPROVE-ARC)

Providing & applying polymer modified cement mortar

in the proportion cement : sand in 1:3 (by weight)

fortified with SBR in 2 or 3 or 4 layers upto 50mm

overall thickness,wherever total thickness of repair is

exceeding 50mm, use of 10/ 6 mm down size

aggregate may be required. The finish surface to

262 10.00 match with the existing adjoining surface etc. Ltr 937.00

complete as directed by Architect/ Engineer Incharge.

[Quantity of SBR actually consumed shall be measured

for payment purpose].(APPROVE-ARC)

Providing & applying polymer modified cement mortar

in the proportion cement : sand in 1:3 (by weight)

fortified with SBR in 2 or 3 or 4 layers upto 50mm

overall thickness. The finish surface to match with the

263 15.00 existing adjoining surface etc.complete as directed by Smt 1187.34

Architect/ Engineer Incharge. [Quantity of SBR actually

consumed shall be measured for payment

purpose].(APPROVE-ARC)

Galvanic Sacrificial Protection of steel:-Providing and

fixing sacrificial zinc anode to prevent initialization of

corrosion of reinforcement due to chloride ingress

from VECTOR Galvashield XPI or equivalent at Min.

to 3 anode/sqm area of concrete (spacing of 300 to

600mm), covered with mortar with of resistivity less

than of parent concrete on the cleaned reinforcement

steel as per manufacturers specification before

applying passivation coating. Item rate is inclusive of

the meterials all labour, supervision , tools and tackles

and transportation etc. complete as per specification

and as directed(APPROVE-ARC)

Providing and fixing PVC plain colour false ceiing with

grid type with a luframe consisting of 600mmx 600mm

3mm thick plain PVC sheet used as panel insert in a

frame work made using an odized alluminium T

section of size 1”x1” (25 x 25mm,19 gauge or 1mm

thick) in square pattern of grid sizes of 2x2 (600 x

600mm).The alluminium frame work is supported

265 30.00 from the ceiling with the help of G.I.hook and Smt 300.12

G.I.wire/6mm M.S.rods of required sizes to maintain

proper level etc.The aluminium frame work is

supported on side wall with the use of alluminium

Lsection of size1x1 (25x25mm)angle set.Complete as

per direction of Engineer incharge. Manufactures,

specification and drawing

Providing and fixing 30 mm thick FACTORY MADE

SOLID PANEL PVC DOOR SHUTTER consisting of frame

made out of M.S. tubes of 19 gauge thickness and size

of 19mm x 19mm for stiles and 15mm x 15 mm for top

and bottom rails. M.S. frame shall have a coat of steel

primers of approved make and manufacture, M.S.

frame shall be covered with 5 mm thick heat moulded

PVC ‘C’ channel of size 30 x 50 mm forming stiles, and

5mm thick 75mm wide PVC sheets for top rail,lock rail

and bottom rail on either side, and 10mm (5mm x 2)

266 15.00 thick, 20mm wide cross PVC sheet as gap insert for top Smt 1960.00

rail and bottom rail, Panelling of 5 stiles and rails with

30mm wide x 5mm thick PVC sheet beading on eighter

side, and joined together with solvent cement

adhesive,. An additional 5mm thick PVC strip of 20mm

width is to be stculk on the interior side of the ‘c’

channel using PVC solvent cement adhesive etc.

complete as per direction of Engineer in

charge,manufacture’s specification and

drawing.(APPROVE-ARC)

Supplying Potable Water Tanker attached with

motorpump to be filled from nearby water

distribution station of AMC. with 30 meter Delivery

267 65.00 Pipe. The tanker should be supplied as & where Trip 450.00

reuired & when order placed by Engineer In- Charge

The rate includes the fuel charge, driver's charge

etc.complete. (APPROVE RATE At amc met-piu)

2mm Aluminium/ 4mm ACP sheeting fixed with Type-

Class-B High Intensity Grade Sheeting as per IRC67:201

reflective sheeting of size including lettering and signs

268 5.00 as applicable,pageNo38,Item code-M1048 Smt 3955.08

Ahmedabad City Building SOR 2023-24- With out

GST(APPROVE ARC)

Providing and fixing of Roller blind

curtain/blackout.The fabric shall be woven from

formulated platisol extruded over a polyaster yarn.The

fabric should be weaved to provide subtle view of the

side of the blind and should offere limination of glare

and sunlight radiance up to a minimum of 80%.The

fabric shall be flame retardant.(Approved rate)

Wall panelling with 12mm MDF fixed to existing

alluminium framing and making grove as per design

270 10.00 and finished with royal plastic paint as per instruction Smt 1688.00

of engineer incharge. (N.S.)

Providing&Connecting 75mm/100 mm dia PVC joints

like Coupler,Tee,Y-joints,Connecting Pipe to

wall,ceiling&floor open/concealed PVC pipe line 10Kg.

F/Sq.Cm working pressure of" Prince/Finolex" or

equivalent Brand of following nominal bore with all

required fitting with brass insert wherever

required,clamps&solution incl.making good the wall,

ceiling and floor.

Providing and laying ACP sheet for Elevation to be

fixed on availabel alluminum section structure,all

272 10.00 fixing materials,finishing,all lead and lift,etc.complete Smt 2200.00

as per engineer in charge

Providing and laying ACP sheet for Elevation including

fixing on alluminum section structure,all fixing

materials,finishing,all lead and lift, etc. complete as

per engineer incharge.

Providing&Fixing Stair/Balcony Railing as per

Consultant's Design from M.S.square

Rectangular,Round pipe of required

Dia,M.S.Flat,Angle,channel&other sections of required

274 10.00 size as per detail work include Rmt 965.00

sutting,bending,welding,grinding,Fixing with necessary

supports-hold fasts,Application of one coat of Zinc

Primer,Two coats of Oil Painting etc.complete.(N.S.)

Fabricating,supplying and fixing in position SS railing

for staircase and balcony with brush finish and

grade as perIndian Standrd and detailed drawing

including grinding,cleaning and filling the welded spots

with SSfinish (Only Length will be paid for payment

heigth max.1.2mt.).The Work to be executed as per

275 10.00 consultant drawing.Top Rail:S.S.Railing pipe Rmt 4213.00

50mmx16GAS IS 304 Grade Vertical Support:

S.S.Rialing Sq pipe 32x32mmx16 GAS IS 304 Grade (at

every 1.0mt to 1.20mt c/c)Horizontal Safety members

:S.S. Railing pipe 16 mm x 16G ASIS 304 Grade (4 Nos.

Providing and fixing 23cms wide chicken mesh jaali

with nails&then application of 15mm plaster on

276 16.00 R.C.C.&Masonary joints as per directed of Engineer in Rmt 220.00

Providing&Mixing of Waterproof Chemical in Cement

mortar for Inside/outside Plaster work

of"Roof","Fosroc"or equivalent make in proportion as

277 30.00 per company's user manuals&Direction of engg. In Liter 260.00

Providing and fixing brush finish stainless

steel(304)stair case railing which includes

cutting/bending/welding/buffing to give brush finish

and grouting in cement concrete with anchor

fasteners without disturbing the flooring or as

278 5.00 approved by the consultants.THREE Horizontal pipes Rmt 3935.00

of 38mm diameter each and top pipe of 50mm

diameter.Vertical Post of size 50mm diameter at every

1200 mm.At the end and start of the flight,baluster

of75mm diameter pipe shall be fixed.

Providing and fixing Kitchen sink with C.I. or M.S.

brackets,painted white including cutting holes in walls

and making good the same but excluding fittings.

©Vitreous China Sink. (i) 600 mm x 450 mmx150 mm

Providing & Fixing S.S.304 Grade Sink of Nirali /

Krishna or Equivalent Make for Kitchen Platform of

size :24"x18" as per Direction of engg. In charge

Supplying and fixing Conductive anti static

homogeneous Anti bacterial & Anti fungal Vinyl

flooring rolls of P group of approved make & shade

minimum 2.0 mm thick of standard sizes as per EN

649/relevant code of manufacturers specification

having 10 years replacable warranty over the existing

floor. The rate shall include all cuttings and wastages,

cutting and providing tile above electrical trunking,

cost of all materials adhesives of approved make etc,

including welding of joints., Coving and copper strips,

281 2.00 complete all as per detailed drawings and Smt 2307.21

specifications as directed by EIC Material to be

installed using Conductive Adhesive only. Only laid

area will be measured for payment. Rate Includes lead

and lift at all floors. The item to include all materiral,

fixing, scaffolding, labour, Wastage etc. complete in all

respects. Note: No extra payment pay for architectural

Ornamental Design upto 10% of flooring area. Rate

shall be inclusive of cutting of tiles in any shape, at any

level for service cutout.

SIGNAGES HANGING FROM CEILING

Providing,Fabricating&Fixing signage's using 304 grade

Stainless steel1.5mm thick brushed steel finish plate

(2nos) with 8mm thk. Acrylic sheet covered with vinyl

of approved colour,sandwiched between two S.S plate

and fixed with s.s struds.Sandwiched plates should be

282 130.00 fixed in 12mmX12mm S.S 1.5mm thk .304 grade frame Sq.inch 61.60

and punched(lasercut) lettering carried out on both

the s. s plate so frequired size and text as directed by

Engineer and hanged to ceiling with the help of S.S

8mm thick chain at both ends with making all the

fixing arrangement to the ceiling and to the plate

providing and Fixing High Quality Vinyl Printing with

Pasting in Lamination in 3 mm foam sheet with

283 120.00 loading, unloading, labour Charges ETC Sq.Feet 62.00

Complete.Approved Rate in Publicty Department

providing and Fixing Recto reflective Vinyl Printing

with ACP sheet Sinages with loading, unloading, labour

284 30.00 Charges ETC Complete.Approved Rate in Publicty Sq.Feet 240.00

Department I.N.34

FIRE EXTINQUISHER (CO2,ABC,K-TYPE)

Refilling and servicing of ABC Type (Mono Ammonium

Phosphate 50%) Fire Extinguisher with a capacity of

KG, including complete discharge, internal cleaning,

refilling with fresh MAP 50% powder, cartridge

285 50.00 checking, and overall inspection as per safety Nos 850.00

standards.(approve rate at amc met-piu)

Refilling and servicing of CO₂ Type Fire Extinguisher

with a capacity of 4.5 KG, including safe discharge of

286 50.00 residual gas, internal inspection, valve servicing, and Nos 758.93

refilling with certified CO2 gas as per safety

norms..(approve rate at amc met-piu)

Complete refilling and servicing of K-Type Wet

Chemical Fire Extinguisher with a capacity of 6 Litres,

specially designed for kitchen and cooking oil fire

hazards. Including safe discharge, internal cleaning,

287 1.00 refilling with approved wet chemical solution, and Nos 4800.00

valve assembly servicing as per safety compliance

standards..(approve rate at amc met-piu)

Providing and fixing, testing and commissioning of Dry

Chemical Powder (ABC) Store Pressure type 6 kg

confirm to IS: 15683, with ISI marked / TAC approved

288 5.00 fitted with required accessories including wall Nos 2495.00

suspension brackets.(approve rate at amc met-piu ARC

Providing and fixing, testing and commissioning of

Carbon Dioxide (Co2) type Fire Extinguisher of 4.5 kg

confirm to IS:15683, with ISI marked/TAC approved

289 5.00 fitted with required accessories including wall Nos 4710.00

suspension brackets.(approve rate at amc met-piu ARC

FURNITURE ITEAM

Meeting Room Conference Table.(approve rate at L.G

&SCL HOSPITAL )

Executive Hydraulic Revolving Chair with foam rubber

291 2.00 Handel,directed by Engg. in Charge.(approve rate at Nos 15010.00

L.G &SCL HOSPITAL )

Medium Back Revolving Chairs with foam rubber

292 3.00 Handel,directed by Engg. in Charge..(approve rate at Nos 10580.00

L.G &SCL HOSPITAL )

Medium Back Revolving Chairs with foam rubber

Handel,directed by Engg. in Charge..(approve rate at

293 2.00 L.G &SCL HOSPITAL ) Nos 15050.00

Box Type Sofa Two Seater Foam Rexin/Tepestri

Cusion,directed by Engg. in Charge..(approve rate at

L.G &SCL HOSPITAL )

Box Type Sofa Three Seater Foam Rexin/Tepestri

Cusion,directed by Engg. in Charge..(approve rate at

295 1.00 L.G &SCL HOSPITAL ) Nos 38850.00

Round Tripod,directed by Engg. in Charge..(approve

296 3.00 rate at L.G &SCL HOSPITAL ) Nos 8750.00

Side Tripod (Size: 18" x 12" x 15") Laminated,directed

297 5.00 by Engg. in Charge.(approve rate at L.G &SCL Nos 1450.00

Office Chair with foam on seat-back side,directed by

298 3.00 Engg. in Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 5800.00

Students Chair with writing pad,directed by Engg. in

299 5.00 Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 3500.00

Stool for Peon with laminated Top (Size: 13" x 13" x

300 6.00 21"),directed by Engg. in Charge..(approve rate at L.G Nos 2160.00

&SCL HOSPITAL )

Waiting Area's Chairs in Set of 3 Nos,directed by Engg.

in Charge.(approve rate at L.G &SCL HOSPITAL )

Executive Table Laminated Top Drawer Cabinate with

Side Cabinet(Special Shapes as per

Requirement),directed by Engg. in Charge.(approve

302 1.00 rate at L.G &SCL HOSPITAL ) Nos 33685.00

B-Table with top laminate and with Top two cabinate

and apron,directed by Engg. in Charge.

Computer Table with Key Board Drawer & Cabinet

304 3.00 (Size: 4' x 2' x 2.5"),directed by Engg. in Charge Nos 12045.00

.(approve rate at L.G &SCL HOSPITAL )

E-Table Laminated Top with one Cabinet (Size: 3' x 2' x

305 1.00 2.5),directed by Engg. in Charge.(approve rate at L.G Nos 7000.00

&SCL HOSPITAL )

Podium For Teacher's In Teaching Room,directed by

306 3.00 Engg. in Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 7140.00

Steel Trainee Locker with 12 Nos. (Approx. Size 78" x

307 1.00 36" x 18"),directed by Engg. in Charge.(approve rate at Nos 20500.00

L.G &SCL HOSPITAL )

Big Steel Reck with 6 Partition (Size: 6.25' x 3' x

308 5.00 1.25),directed by Engg. in Charge.(approve rate at L.G Nos 6800.00

&SCL HOSPITAL )

20 Gauge Steel Store Cupboard with Two

309 2.00 Partition,directed by Engg. in Charge. (Approx. Size 50" Nos 10050.00

20 Gauge Steel Store Cupboard with Glass door and

Four Partition (Approx. Size 78" x36"X18"),directed by

Engg. in Charge..(approve rate at L.G &SCL HOSPITAL )

Notice Board with Glass Shutter (Size: 3.5' x 2" x

311 5.00 3"),directed by Engg. in Charge.(approve rate at L.G Nos 4450.00

&SCL HOSPITAL )

Simple Soft Board with Cloth,directed by Engg. in

312 46.77 Charge.(approve rate at L.G &SCL HOSPITAL ) Sq.ft 254.00

The Rates are Exclusive of GST. Prevailing GST will be paid separately.

Contractor’s Quoted Rate

IN FIGURE IN WORDS

Net Quoted Tender Amount Rs.

Seal and Signature of the Bidder Additional City Engineer

mobile no. (amc met/Hospital)