REPAIRS/ REPLACEMENT TO AREA DRAINAGE, COVER SLAB, CATTLE TRAP AT NON TECH AREA INS KALINGA AND REPAIR/ REPLACEMENT OF DOORS, WINDOWS, GATE AND CONNECTED ITEMS TO CERTAIN BUILDINGS AT TECH, NON-TECH AREA AT INS KALINGA AND KARNA UNDER GE (P) NAVY KAL

Amount

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Demolition of Brick work or stone boulders masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc built in cement mortar complete all as specified and as directed by the Engineer-in-Charge.

Cleaning of open drains by removing soil/sand accumulated in the drains and removal/disposal of the same to a distance exc 250 m and n. exc. 500m away and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in surface channels and drain complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC 1:2:4 type B1 (Using 20mm graded granite stone aggregate) in benching/coping, lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railings up to 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engineer-in-Charge.

M&L for precast RCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.

M&L for brickwork with fly ash bricks, straight or curved on plan n. exc. 6m mean radius, built in cement mortar 1:4 complete all as specified and directed by the Engineer-in-Charge.

M&L precast cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm in width and set in cement mortar 1:6 complete all as specified.

S&F reinforcement TMT steel bars of 10mm dia. and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia. or securing with clips or welded complete all as specified and as directed by the Engineer-in-Charge.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished fair and even complete all as specified and as directed by the Engineer-in-Charge.

S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 for portions framed and hung as gates including pintle hinges, stops, hand made sliding bolts, etc for ornamental and intricate design complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces over 10cm width or girth complete all as specified and as directed.

S&F high density polyethylene (HDPE) pipe of pressure rating 6 kgf/ sq. cm

S&F 150 mm dia CPVC schedule 40 pipes & plain CPVC schedule 80 fittings in trenches complete all as specified and as directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Taking down Chowkhats or frames exc. 1.5 sq. m but n exc 4.0 Sqm each with shutters (without taking off shutters from the frames)

Taking down Aluminium door shutters of any description exc 01 Sqm but n.exc 4.00 Sqm complete all as specified and as directed.

Taking down Aluminium Window/ Ventilator shutters (Sliding / Hunged) of any description exc 0.50 Sqm but n.exc 2.00 Sqm complete all as specified and as directed.

Taking down shutters of any description not exc 01 Sqm each, complete all as specified and as directed.

Taking down shutters of any description exceeding 01 Sqm and not exc 02 Sqm each, complete all as specified and directed.

2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed..

S&F angle iron/ Flat iron work as in hold fasts including fixing with screws conforming to Fe-290 Gde-165 completed all as specified and as directed.

Material labour for PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregates as in hold fast block complete.

S & F for 2nd class Hard wood , factory made, 35 mm thick plain framed, panelled shutters ( Two panels),with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered particles board with commercial veneering on both faces. the size of rail and stile as per IS 2009 (part-I)

Supply and fix 30mm thick flush shutters solid core construction with particle board core and plywood face panels, one face covered with decorative face veneer with lipping / frame to match complete all as specified and as directed.

M & L for 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);

S & F for Solid PVC Door Frame of size 50mm x47mm made out of 5mm Ivory colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rail, MS frame shall be covered with heat moulded Ivory colour PVC "C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed to gether with solvent cement, supplying & fixing in the frame at site as per specification and shown on drawing in SSR Part II 2020.

Supply and fix 125 mm size butt hinges, medium weight, stainless steel and fixed with stainless steel screws. complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed with stainless steel screws. complete all as specified and as directed.

S & F of 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed with stainless steel screws.

S & F of 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed with stainless steel screws.

S & F in repairs of 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed with stainless steel screws.

S & F Aluminium handles, cast type, anodised of size 100 mm with stainless steel screws.

S & F Aluminium handles, cast type, anodised of size 150 mm with stainless steel screws.

Supply and fix 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed..

Supply and fix 200mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed..

Supply and fix 150mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed..

S & F for UPVC ,(unplastisized poly-Vinyl Chloride) sliding windows (3 track) frame multi-chambered and stiffened framed, using 88mm x 52mm size sections all-round as main frames fixed the window unit to the existing masonry wall/ Marble/ Granite with anchor fasteners without damaging as required. The frames shall be reinforced with GI profiles of thickness 1.25mm the entire window, The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials complete all as specified and as directed.

S&F UPVC Sliding window shutters, Three track, (2 No x Glazed & 1 No x wire mesh), White Colour of area not exceeding 2.0 Sq.m, made with extruded profile sections with wall thickness of 2.3mm±0.2mm of size 57mm x 42mm fixed to UPVC frame, shutters shall have well defined welded corner joints without any gaps, The shutters shall have necessary handles, arrangement to Drainage of water and other associated fittings to facilitate smooth operation. The shutters shall be reinforced with GI profiles of thickness 1.25mm including fixing glass and Wire mesh complete all as specified and as directed. Make : Rajshri Plastiwood/Sintex/Duroplast Extrusion Pvt. Ltd. (i) The unit rate quoted by the contractor includes cost of fixing of glass panes and wire cloths including all other connected accessories. (ii) The Glass Panes and wire mesh shall be measured and paid separately under relevant Supply only Items of this Schedule. (iii) The size of UPVC sections specified in the description of item is minimum requirement, if the same size of section is not available, next higher size shall be provided by the contractor without any extra cost to the Department.

Providing and fixing factory made uPVC white / colour casement window frame for Ventilator (Size-60 mmx 58 mm ), made of extruded profiles. Profiles of frames will be mitered cut and fusion welded at all corners , 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed Make : Rajshri Plastiwood/ Sintex/Duroplast Extrusion Pvt. Ltd

S&F UPVC Side/Top hung shutters, White Colour of area not exceeding 2.0 Sq.m, made with extruded profile sections with wall thickness of 2.3mm±0.2mm of size 57mm x 42mm fixed to UPVC frame, shutters shall have well defined welded corner joints without any gaps, The shutters shall have necessary handles, arrangement to Drainage of water and other associated fittings to facilitate smooth operation. The shutters shall be reinforced with GI profiles of thickness 1.25mm including fixing glass and Wire mesh complete all as specified and as directed. Note : (i) The unit rate quoted by the contractor includes cost of fixing of glass panes and wire cloths including all other connected accessories. (ii) The Glass Panes and wire mesh shall be measured and paid separately under relevant Supply only Items of this Schedule. (iii) The size of UPVC sections specified in the description of item is minimum requirement, if the same size of section is not available, next higher size shall be provided by the contractor without any extra cost to the Department.

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality, A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work, GI frames fixed to the window to existing masonry wall/ Marble/ Granite with anchor fasteners without damaging complete all as specified and as directed.

S&F powder coated aluminium sliding window with three track outer frame suitable for sliding aluminium shutters, weight of aluminium section not less than 0.55Kg/M of three track frame, including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with stainless steel wire mesh including necessary locking arrangement , handle, aluminium grill of aperture size 50mm and 4mm dia etc complete all as specified.

Supply and fix powder coated anodised aluminium glass louver /ventilators with blades of 10mm heavy duty with lever handle etc complete all as specified and directed.(Note- Glass shall be measured and paid separately)

M&L for powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, powder coated aluminium hinges, powder coated aluminium snap beading, screws etc, complete all as specified and directed.

Supply and fix powder coated aluminium frame for doors, windows, ventilators(including 2/3 track) with one or more rebates or for doors fabricated out of powder coated aluminium hallow square or rectangular section of required size including necessary joining cleat for fixing etc complete all as specified and directed.

M & L for 2nd class hardwood Plain fillets, square, rectangular or triangular in section of size exc 13 Sqcm but n.exc 25 Sqcm, clean sawn, secured with nails or brads

S&F for 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work including all round 10mm thick polished plain beading complete all as specified and as directed.

S&F continuous (piano) hinges, Brass bright finish with width of flat (when open) in 30mm, complete all as specified and as directed

S&F Stainless steel magnetic catcher for fixing in cupboard, to hold the shutter in closed position, complete all as specified and directed

S&F of 40 mm dia, stainless steel cupboard knobs fixed with nut, screw and washer of Stainless steel, fancy type bright finished, complete all as specified and directed

M&L for hasp and staple Aluminium anodized ,incl bolt to hinge plate and fixed with screws 100 mm long.

Dismantling timber fillets below 40 sqcm in section in any position as in framed / unframed works such as Doors, Cupboards, Windows, fillets etc, complete all as specified and as directed.

M & L for 2nd class hardwood Plain fillets, square, rectangular or triangular in section of size exc 03 Sqcm but n.exc 06 Sqcm, clean sawn, secured with nails or brads

Supply only 5.00mm thick Sheet Glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.

All as per item No. 58 but frosted glass 4.00mm thick

Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair 4.8 mm thick sheet glass, pin headed type & glazing with oil putty in square n exc. 0.5 sqm in each pane complete all as specified.

All as per item No. 61 but frosted glass 4.00 mm thick

S & F in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

S&F of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed

S&F in repairs of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed

S&F Rubber bush of 25mm long fixed to door complete all as specified and directed.

S&F Rubber Strip of 40mm Width and length 0.6m-1.2m fixed to door bottom complete all as specified and directed

S&F in repairs to 125 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed

Easing of Wooden Door shutters of any size exc 1.00 Sqm but n.exc 3.00 Sqm for easy closing/ opening / tightening of hinges or changing the position of hinges, chiselling sides wherever required including making good with painting, adjustment of tower bolts, handles and sliding door bolts etc. all complete all specified .

M & L for Repair of Aluminium Door shutters by removing the shutter from frame and refixing after repairs in same opening of any size exc 1.00 Sqm but n.exc 3.00 Sqm for easy closing, opening, tightening of corner angles, tightening of hinges or changing the position of hinges, adjustment of tower bolts, peg stays, handles and sliding door bolts etc. all complete all specified. Note : Rate including supply and fixing of damaged Cleats and Beadings.

Easing of Wooden Window shutters of any size exc 0.50 Sqm but n.exc 3.00 Sqm for easy closing/ opening / tightening of hinges or changing the position of hinges, chiselling sides wherever required including making good with painting, adjustment of tower bolts, handles and sliding door bolts etc. all complete all specified .

M & L for Repair of Aluminium Window (Sliding or Hanging / Ventilator shutters by removing the shutter from frame and refixing after repairs in same opening of any size exc 0.50 Sqm but n.exc 3.00 Sqm for easy closing, opening, tightening of corner angles, tightening of hinges or changing the position of hinges, adjustment of tower bolts, peg stays, handles and sliding door bolts etc. all complete all specified. Note : Rate including supply and fixing of damaged Rollers, Pegstays and Beadings.

Dismantling cast iron work of any description complete all as specified and as directed.

S & F Fe 410 W (Gde-E 250 Quality-A ) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Supply and fixing in repairs Aluminium extruded section Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

Supply and fix in repair for toughened glass of 12 mm thick of any colour as directed by GE as in doors, partitions, windows, bathing cubical with sliding door etc with Kolf SAFEX or OZONE fittings accessories like handle, door machine and all necessary required accessories/fitting for fixing complete all as specified and directed.

S&F in repairs floor door stopper 150mm (overall length of cover plate) of aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M & L ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/ hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same.

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

M & L for Ist or premium or standard quality of non skid, ceramic coloured joint free tiles of size area of each tile exceeding 0.18 sqm but not exceeding 0.38 and thickness 7-8mm, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed of CM 1:6 complete of item all as directed.

M & L for Ist or premium or standard quality of non skid, ceramic coloured joint free tiles of size area of each tile exceeding 0.18 sqm but not exceeding 0.38 and thickness 7-8mm, as in vertical surfaces such as walls, shelves sides etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 10mm thick rendering with CM 1:4 complete all as specified and as directed.

M & L for non skid, ceramic “coloured” joint free tiles of size area of each tile exceeding 0.06 sqm but not exceeding 0.11 and thickness 7-8mm, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed of CM 1:6 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles 300 x 450 x 7mm thick as in vertical surfaces set & jointed in neat cement slurry & pointed with coloured cement to match over 10 mm thick rendering with CM 1:4 all as specified & directed.

Material and labour for rendering (Internal Surfaces) 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering (External surfaces) 10mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of new plastered surface (internal walls) and applying two coats of oil bound distemper over a coat of alkali resistant primer over wall care putty of 1mm thick with roller complete all as specified and as directed.

M & L for preparation of new plastered surfaces (External walls) and applying two coats of Cement base paint over a coat of alkali resistant primer with smooth roller machine complete all as specified and as directed.

M & L for preparing new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed .

S&F in repairs mortice lock of size 100mm aluminium, 4 lever type, duly fixed in aluminium door, complete all as specified and directed

Uprooting of wild trees such as grasses/ bushes etc. from the roof/wall surfaces/AC sheet/soil pipes surroundings including its penetrated roots and making good to the damaged plaster by providing cement mortar (1:3) and finished the surfaces to match with existing surfaces complete all as specified and as directed. (Cost of materials is deemed to be included within the quoted rate)

M & L for Chemical Cement Grouting Walls cracks with Special grouting materials and cutting 'V' shape grooves, removing loose hardened old grout or any type of waste complete all as specified and as directed. List of Grouts Ultratech Cement Grout Myk Laticrete Cement Grout Saint Gobain weber cement grout Birla white cement grout

Repairs to Top Cleat / Floor spring of Aluminium door, Tightening of screws completed all as specified and as directed.

Supply and fix Stainless steel Top cleat plate set to Aluminium door including screws complete all as specified and as directed.

Repairs to SS Handles of Aluminium door/ Toughened, Tightening of screws completed all as specified and as directed.

Supply and fix 300-600mm Length Stainless steel Fancy Handle to Aluminium/ Toughened door including screws complete all as specified and as directed.

Supply and fix in repair 304 Grade 25mm Outer dia stainless steel curtain rod of 1mm wall thickness cut to required length complete all as specified and as directed.

Supply and fix in repair 304 Grade Universal Curtain rod brackets One Pair (One pair comprises of Two Pieces, One with closed opening and one with half round opening for laying of Curtain rod as specified in Item no 96 above) of 63mm x 20mm x 1mm wall thickness fixed to wall with Stainless steel Screws complete all as specified and as directed.

M & L for preparation of new steel Surfaces by removing durt,rust, oil or other contaminants from the surface of any description and applying two coats (approved shade/ Colour) of Powder coating of thickness not less than 60 microns ( Total thickness after 2 Coats is 120 Microns) complete all as specified and as directed. Notes :- 1.MS Grills or Angle posts are to be Powder coated in Workshops only. 2. Quoted rate includes Transportation. 3. Any defective item should be re- powder coated at bring to work site at contractor expenses. 4. Testing to Coating thickness to be carried out if required at contractor's own arrangements.

Taking down rolling shutter and re-fixing to its original position after cleaning all parts, straighten sliding rails, replacing damaged strips, bottom rails, helical spring as required, greasing/ oiling, servicing for smooth functioning for all parts, including welding etc. rolling shutter push pull or manual type, size n. exc. 10Sqm complete all as specified and directed. Note:- Supply only of parts to be replaced parts shall be measured and paid separately.

All as per Ser. No. 99 above but rolling shutter gear operated type with bevel gear box and cranked handle for smooth function, size exceeding 10Sqm but not exceeding 20 Sqm complete all as specified and directed.

Supply only steel sheet 75mm wide lath strip 1.25mm thick for rolling shutters including mild steel clips at either ends duly painted with two coats of synthetic enamel paint (shade to match with the existing) over a shop coat of red oxide primer complete all as specified and directed.

Supply only mild steel spring 75mm to 150mm dia made of high tensile steel wire conforming to IS: 4454 having 60 to 80 helical for smooth working condition for rolling shutters complete all as specified and directed.

Supply only mild steel anchoring rod 50mm dia including necessary fixture for rolling shutters complete all as specified and directed.

SREE VIGNESWARA CONSTRUCTIONS

VENKATA SHIVA RAJENDRA PRASAD ARAVALA

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS

SWATHI CONSTRUCTIONS

P D S GANESHWAR