Supply and fixing of medium mast lighting tower along with light set, fabrication, earthing, switching and concreting related work at each weighbridge and check post of Karma OCP under Kuju Area.

Amount

Excavation work by mechanical means (Hydraulic excavator)/manual means in foundation trenches of drains (not exceeding 1.5 m In width or 10 sqm on plan), Including dressing of sides and ramming of bottoms, lift upto 1.5m, Including getting out the excavated soil and disposal of surplus excavated solls as directed, within a lead of 50 m. Ordinary rock

roviding and laying in position cement concrete of specified grade excluding the cost of contering and shuttering-All work up to plinth level: size Recycled concrete Aggregate (RCA) upto 25% 1:2:4(1 cement:2 coarse sand (zone-III) derived from natural sourses: 4 graded stone aggregate 20mm nominal size derived from natural sourses)

Foundation bolt MS for base (25mm dia x 3 feet length along with nut

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works for top and bottom fabrication work.

Supplying and erecting of tubular lighting tower having size bottom 5.6 mtr diameter thickness (193.7mmx4.85mm), middle 2.7 meter diameter thickness (165.1mmx4.50mm) and top 2.7 meter diameter thickness (139.7mmx4.50mm).

Supplying and fixing flood light with high power LED of 3 to 6 Watt each assembled on single MCPCB and additional unique peanut leans on each LED, system lumens output with efgficacy>120lm/Watt. Luminlare having color temp upto 6500K & 50000 hrs.burning life with minimum 1.70, The colour rendering Index of LED light should be more than 70. Luminlare comprises of driver, PF>0.95 & surge protection 10KV. Housing made of pressure die cast aluminium with heat assistant flat glass, IP65 protection, Submission LM 79-08/1516106(2012), IEC60598, IEC613471/c connections wire, testing etc. to complete the job, 15W 150Watt, color temp 3000- 6500K as required. Each

Earthing with copper earth plate 600mmX600mmX3mm thick Including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long ete with charcoal/coke and salt as required.

Providing and fixing following capacity TP&N disconnector fuse switch unit Inside, NOS the existing panel board with ISI marked HRC fuses Including drilling holes in cubical panel, making connections etc as required 32A

Supplying & drawing/laying of PVC Insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminium solid/stranded confirming to 15-14255- 1955, alualloy Insulated messanger 1100 volts grade cable of approved make in alt with necessary material as per specification of required size ns mentioned below-3x50 sq.mm, 1x16(st.light) 1x35(Insulated neutral

Providing and fixing of timer set 2 no +2 nt with 65Amp contractor complete set

Supplying and erection of 11KV pin insulator complete with large steel head G.I pin, nuts, washers etc. as required.

Supplying of channel iron 75 mm X 40 mm x 6 mm (7.14 kg permetre) pole top bracket/cross arm for single 11 KV over head line conductor complete with 50 mm x 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins. bolts and nuts etc and painting with primer and finish paint as required

Supply and fixing of 4 spike copper Lightning Arrestor

Supply of XLPE insulated power cable (conforming IS- 7098 Part-1) 1100 Volt grade, 1 core/2 core/3% core/4 core 151 marked with alu. stranded/solid conductor(Single core)

Total impact of GST for the purpose of CTC

M/S ADITYA ENTERPRISES

M/S VAISHALI ELECTRIC COMPANY