MOE1/14612/21

Amount

Part I- Electrification (Materials used for the work shall be as per the List of materials approved by the Dist. Level Technical Committee )

OD313204/2022-2023:Excavation of soft soil of size 1Mx1Mx1.5M for making of foundation of concrete structure for mounting of Octogenal GI post at a depth of 1.75 mtr .Concreating work includes providing 10 mm thick layer of plain cement concrete at bottom ,and RCC in 1;2;4 of size .9Mx.9Mx0.1mm thick as foot slab and continues RCC work of size .35x.35 mtr for a height of 1.75 mtr and plastering exposed surface with cement plaster.

90.15.2.3:Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 100mm top diameter, 360mm bottom diameter thickness 3mm mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 12 Meters

OD308150/2022-2023:Fabricating charges and cost of of GI lamp post 9 mtr long( bottomportion 3 mtr 125 mm,middle portion 3mtr 100mm,top portion 3 mtr 75 mm single)using GI reducers suitably welded to position shaping the welded porion in smooth surface ,painting in superior quality enamel paint over a coat of red oxide primer etc .

OD308195/2022-2023:Erecting of the GI fabricated MIini mast lamp post including earth work excavation earth work excavation cocreting foundation of GI post foot foundation 1:4:8 using 40mm broken stone and providing cement concrete 1:2:4 using 20mm broken stone of required width and depth as directed by Engineer at site and providing concrete mass up to a height minimum 30 cm above ground level including plastering the exposed surface etc complete .Work includes hire and labour charges for machines ,Mini cranes and cost of fitting head frame on top of post for mounting flood lights.

OD308185/2022-2023:Fabrication supply and erecting head frame made of GI Pipe MS angles including welding cutting etc suitable for fixing integral type flood light fittings on top of GI post Mini mast

90.15.4.7:Supply Conveyance, installation, testing and commissioning of 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.15.4.8:Supply Conveyance, installation, testing and commissioning of 120W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD304398/2022-2023:Earthing with GI earth pipe 1 mtr. long 40mm dia. medium class including providing 12mm dia,drilled holes minimum 6 nos along the entire length in alternate arrangement providing test joint using 2 nos ,25x3mm GI strip minimum size 25cm suitably shaped and tightly clamped to the pipe electrode using 25x6 mm steel bolts ,nuts &washer & providing 2 nos ,6mm dia. drilled holes for clamping & bolting earth lead & making masonary chamber made of bricks and duly plastered

90.16.4.1:Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).20 x 3 mm GI strip

OD304399/2022-2023:Supply and providing 25x6 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

OD304400/2022-2023:Supply and laying Aireal bunched cable 25sq mm (2+1)3 core from post to post using proposed accessaries including labour charges

OD304401/2022-2023:Supply of dead end clamps with brackets suitable fot LT ABCable on posts.

OD304402/2022-2023:Supply of AB Cable connector suitable for single phase 2 core cable on posts including support materials .

OD308840/2022-2023:Supply of EYE hook for laying AB Cables on posts using suitable clamps etc

OD304404/2022-2023:Supply and installation of dust and Vermin proof wall mounding junction box weather proof application SINTEX make 300x300 x217 mm or equilent make suitably mounted on GI post with DIN bar for mounting isolator,MCB etc,

OD313174/2022-2023:Supply and installation of dust and Vermin proof wall mounding meter box SINTEX make GSMB 4537 or equilent make with base plate suitable to fix 1 phase energy meter and to fix in the box 1 Nos of 32 A,415 V HRC bakelite fuse fitting with HRC fuse link,32 A 2 way neutral link ,2pole contactor 9A MNX or equilent make single dial timer suitable for single phase supply etc

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

OD308187/2022-2023:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation40/38 mm or nearest size

1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

1.17.1:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm

90.6.5.19:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 2.50 sq mm

90.6.5.6:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.2 core 4.00 sq mm

OD304403/2022-2023:Charges to be paid to KSEB for availing service connection such as CD,connection charges etc availing supply ,testing complete electrical installation and making installation in proper working condition.Payment will be as per actual paid voucher to the KSEB

AJITH

Bidder Name

CHANDRAMOHANAN

AJITH